2024-07-09 21:47:26 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2023-03-20 09:23:10 +01:00
|
|
|
|
2025-10-07 22:31:06 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2023-03-20 09:23:10 +01:00
|
|
|
|
|
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2021-06-11 11:50:48 +03:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2025-11-20 23:46:23 +01:00
|
|
|
|
|
|
|
|
|
2023-03-06 22:44:36 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 20:20:25 +01:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2023-07-19 10:49:34 +02:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
|
|
|
|
|
2023-05-03 11:49:55 +03:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
2023-02-14 12:47:45 -07:00
|
|
|
|
|
|
|
|
|
2026-01-29 18:11:19 +00:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
|
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-02-22 23:46:29 +01:00
|
|
|
|
2021-02-23 21:14:50 +01:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-03 11:49:55 +03:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
2024-03-10 12:17:33 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2024-07-02 06:15:29 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
2023-07-19 10:49:34 +02:00
|
|
|
|
2023-05-03 11:49:55 +03:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-05-04 15:12:24 -04:00
|
|
|
|
2023-03-06 22:44:36 -07:00
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-14 19:48:08 -07:00
|
|
|
|
|
|
|
|
|
zig build: many enhancements related to parallel building
Rework std.Build.Step to have an `owner: *Build` field. This
simplified the implementation of installation steps, as well as provided
some much-needed common API for the new parallelized build system.
--verbose is now defined very concretely: it prints to stderr just
before spawning a child process.
Child process execution is updated to conform to the new
parallel-friendly make() function semantics.
DRY up the failWithCacheError handling code. It now integrates properly
with the step graph instead of incorrectly dumping to stderr and calling
process exit.
In the main CLI, fix `zig fmt` crash when there are no errors and stdin
is used.
Deleted steps:
* EmulatableRunStep - this entire thing can be removed in favor of a
flag added to std.Build.RunStep called `skip_foreign_checks`.
* LogStep - this doesn't really fit with a multi-threaded build runner
and is effectively superseded by the new build summary output.
build runner:
* add -fsummary and -fno-summary to override the default behavior,
which is to print a summary if any of the build steps fail.
* print the dep prefix when emitting error messages for steps.
std.Build.FmtStep:
* This step now supports exclude paths as well as a check flag.
* The check flag decides between two modes, modify mode, and check
mode. These can be used to update source files in place, or to fail
the build, respectively.
Zig's own build.zig:
* The `test-fmt` step will do all the `zig fmt` checking that we expect
to be done. Since the `test` step depends on this one, we can simply
remove the explicit call to `zig fmt` in the CI.
* The new `fmt` step will actually perform `zig fmt` and update source
files in place.
std.Build.RunStep:
* expose max_stdio_size is a field (previously an unchangeable
hard-coded value).
* rework the API. Instead of configuring each stream independently,
there is a `stdio` field where you can choose between
`infer_from_args`, `inherit`, or `check`. These determine whether the
RunStep is considered to have side-effects or not. The previous
field, `condition` is gone.
* when stdio mode is set to `check` there is a slice of any number of
checks to make, which include things like exit code, stderr matching,
or stdout matching.
* remove the ill-defined `print` field.
* when adding an output arg, it takes the opportunity to give itself a
better name.
* The flag `skip_foreign_checks` is added. If this is true, a RunStep
which is configured to check the output of the executed binary will
not fail the build if the binary cannot be executed due to being for
a foreign binary to the host system which is running the build graph.
Command-line arguments such as -fqemu and -fwasmtime may affect
whether a binary is detected as foreign, as well as system
configuration such as Rosetta (macOS) and binfmt_misc (Linux).
- This makes EmulatableRunStep no longer needed.
* Fix the child process handling to properly integrate with the new
bulid API and to avoid deadlocks in stdout/stderr streams by polling
if necessary.
std.Build.RemoveDirStep now uses the open build_root directory handle
instead of an absolute path.
2023-03-01 22:56:37 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
2025-12-05 19:08:37 -08:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
2025-12-08 15:42:42 -08:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-05 17:06:03 -08:00
|
|
|
|
|
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2023-01-07 19:07:24 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2025-12-05 19:08:37 -08:00
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
2025-12-19 16:42:28 -08:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-08 17:21:52 -08:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-05-04 14:29:17 -04:00
|
|
|
|
2025-12-06 17:52:57 -08:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2023-03-02 22:38:07 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-12-19 16:42:28 -08:00
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
|
|
|
|
|
2025-12-08 21:00:04 -08:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
2025-12-19 16:42:28 -08:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
2025-10-07 22:31:06 -07:00
|
|
|
|
2025-12-06 17:52:57 -08:00
|
|
|
|
2025-10-07 22:31:06 -07:00
|
|
|
|
2024-07-10 15:09:46 -07:00
|
|
|
|
2025-12-06 17:52:57 -08:00
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
std.Build: adjust temp files API
Remove the RemoveDir step with no replacement. This step had no valid
purpose. Mutating source files? That should be done with
UpdateSourceFiles step. Deleting temporary directories? That required
creating the tmp directories in the configure phase which is broken.
Deleting cached artifacts? That's going to cause problems.
Similarly, remove the `Build.makeTempPath` function. This was used to
create a temporary path in the configure place which, again, is the
wrong place to do it.
Instead, the WriteFile step has been updated with more functionality:
tmp mode: In this mode, the directory will be placed inside "tmp" rather
than "o", and caching will be skipped. During the `make` phase, the step
will always do all the file system operations, and on successful build
completion, the dir will be deleted along with all other tmp
directories. The directory is therefore eligible to be used for
mutations by other steps. `Build.addTempFiles` is introduced to
initialize a WriteFile step with this mode.
mutate mode: The operations will not be performed against a freshly
created directory, but instead act against a temporary directory.
`Build.addMutateFiles` is introduced to initialize a WriteFile step with
this mode.
`Build.tmpPath` is introduced, which is a shortcut for
`Build.addTempFiles` followed by `WriteFile.getDirectory`.
* give Cache a gpa rather than arena because that's what it asks for
2026-01-04 17:23:45 -08:00
|
|
|
|
|
|
|
|
|
2024-03-03 17:14:02 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-02-22 17:23:03 -07:00
|
|
|
|