2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-03-26 15:45:36 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
2026-06-13 13:56:42 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-21 15:29:35 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
2026-04-21 15:29:35 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allow trusted symlinks beneath CODEX_HOME on macOS (#42716)
## What changed
- Add the macOS-only `allow_symlinked_codex_home` user setting. When enabled in the execution host's `$CODEX_HOME/config.toml`, writable roots at or beneath that home may traverse symlinks.
- Keep the exception disabled by default and prevent project config, command-line overrides, and ignored user config from enabling it. Other writable roots remain subject to symlink checks.
- Propagate the resolved setting through local, interactive, and exec-server sandbox paths, including `CODEX_HOME` aliases.
- Explain the opt-out in symlink rejection errors, including that it trusts targets outside `CODEX_HOME` and targets that change between commands.
## Testing
- Add macOS coverage for shell commands, patches, filesystem helpers, process execution, and interactive startup with enabled, disabled, aliased, and out-of-scope homes.
GitOrigin-RevId: 99fcdf611200c9e1b7713cf06f7fdea5bfa7f089
2026-09-04 10:00:23 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-21 15:14:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
2026-08-21 12:01:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-21 12:01:45 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Preserve complete shell snapshot exports through filtering and replay (#43907)
## Why
Line-based export parsing can truncate multiline values or mistake their contents for declarations. Snapshot replay also needs to restore Bash options before parsing functions that use extended glob syntax.
## What changed
- Capture shell state, aliases, and complete export records with NUL-delimited boundaries, separating capture, credential preparation, and rendering.
- Apply credential and environment policy to whole exports, preserving multiline values and making credential aliases follow allowed overrides.
- Restore Bash `shopt` options before functions, including for Bash running as `sh`.
- Support non-evaluating POSIX `ENV` path expansion and preserve native environment metadata and unset exports.
- Move core and exec-server snapshot consumers to the shared capture parser. Allow capture overhead while enforcing the exec-server's 512 KiB state-and-environment limit before filtering.
## Testing
Add regression coverage for complete capture records, multiline export filtering and replay, credential alias overrides, `ENV` expansion, and `PATH` export state. Extend exec-server tests to cover Bash-backed `sh`, `extglob`, `nocasematch`, `set -u`, and large environments.
GitOrigin-RevId: 7589ab4d137529a395dcee10b5162718de24a621
2026-09-08 20:12:02 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-08-24 18:03:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 08:54:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 21:03:46 +00:00
|
|
|
|
2026-07-21 08:54:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 21:03:46 +00:00
|
|
|
|
2026-07-21 08:54:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-07-21 08:54:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-07-21 08:54:47 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-03-26 15:45:36 +00:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-13 09:59:08 +01:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 19:11:29 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 19:11:29 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 19:11:29 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 19:11:29 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-07-09 18:28:55 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-21 19:11:29 +00:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-07-10 16:46:38 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[codex] consume pushed exec-server process events (#30273)
## Summary
- complete unified-exec processes from the ordered event stream instead
of issuing a final zero-wait `process/read`
- add optional executor sandbox-denial state to `process/exited`
- retain `process/read` as a retained-output and compatibility fallback
for receiver lag, sequence gaps, and legacy servers
- recover sandbox-denial state across transport reconnection
- cover the real `TestCodex` remote-exec path without adding a public
test-only event constructor
## Why
A successful one-shot tool call currently receives its output and
terminal notifications, then pays another wide-area `process/read` round
trip before returning. Staging traces showed that remote response wait
accounted for more than 99.8% of RPC time; local serialization,
queueing, and deserialization were below 0.6 ms.
## Measured impact
A direct staging A/B used the same build and route and changed only
completion mode. Each arm ran three times with 30 one-shot
`/usr/bin/true` calls per run. The table reports the median of the three
per-run percentiles.
| Metric | Final `process/read` | Pushed events | Change |
| --- | ---: | ---: | ---: |
| End-to-end completion p50 | 159.5 ms | 118.7 ms | -40.8 ms (-25.6%) |
| End-to-end completion p95 | 182.4 ms | 131.7 ms | -50.6 ms (-27.8%) |
| Completion-wait p50 | 80.1 ms | 41.5 ms | -38.5 ms (-48.1%) |
| Final `process/read` RPC p50 | 79.9 ms | eliminated | -79.9 ms |
TCP_NODELAY was enabled in both A/B arms, so its effect cancels out. The
successful, complete, in-order event path issued zero final
`process/read` calls.
## Compatibility and recovery
- new servers send `sandboxDenied` on `process/exited`
- legacy servers omit it, which triggers one compatibility
`process/read`
- broadcast lag or a sequence gap triggers a retained-output read
- recovery remains bounded by the server's existing 1 MiB
retained-output window
- complete, in-order event streams issue no completion read
- sandbox denial is attached to the exit event before consumers can
observe process completion
- server-first and client-first rollouts remain wire-compatible;
server-first realizes the latency win immediately
## Integration coverage
The `TestCodex` suite exercises four distinct remote-exec contracts:
- complete pushed output/exit/close with zero reads
- direct pushed sandbox denial with zero reads
- legacy missing denial metadata with exactly one compatibility read
- count-bounded replay eviction recovered from retained output without
duplication
## Validation
- `just test -p codex-core
exec_command_consumes_pushed_remote_process_events`: 4 passed
- `just test -p codex-core unified_exec::process_tests::`: 4 passed
- `just test -p codex-exec-server`: 294 passed, 2 skipped
- `just test -p codex-exec-server-protocol`: 5 passed
- `just test -p codex-rmcp-client`: 89 passed, 2 skipped
- focused Bazel `//codex-rs/core:core-all-test`: passed across 16 shards
- scoped `just fix` passed for core and exec-server
- `just fmt` passed
The complete workspace suite was not rerun; focused Cargo and Bazel
coverage passed for the changed behavior.
2026-06-26 18:05:52 -07:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[codex] consume pushed exec-server process events (#30273)
## Summary
- complete unified-exec processes from the ordered event stream instead
of issuing a final zero-wait `process/read`
- add optional executor sandbox-denial state to `process/exited`
- retain `process/read` as a retained-output and compatibility fallback
for receiver lag, sequence gaps, and legacy servers
- recover sandbox-denial state across transport reconnection
- cover the real `TestCodex` remote-exec path without adding a public
test-only event constructor
## Why
A successful one-shot tool call currently receives its output and
terminal notifications, then pays another wide-area `process/read` round
trip before returning. Staging traces showed that remote response wait
accounted for more than 99.8% of RPC time; local serialization,
queueing, and deserialization were below 0.6 ms.
## Measured impact
A direct staging A/B used the same build and route and changed only
completion mode. Each arm ran three times with 30 one-shot
`/usr/bin/true` calls per run. The table reports the median of the three
per-run percentiles.
| Metric | Final `process/read` | Pushed events | Change |
| --- | ---: | ---: | ---: |
| End-to-end completion p50 | 159.5 ms | 118.7 ms | -40.8 ms (-25.6%) |
| End-to-end completion p95 | 182.4 ms | 131.7 ms | -50.6 ms (-27.8%) |
| Completion-wait p50 | 80.1 ms | 41.5 ms | -38.5 ms (-48.1%) |
| Final `process/read` RPC p50 | 79.9 ms | eliminated | -79.9 ms |
TCP_NODELAY was enabled in both A/B arms, so its effect cancels out. The
successful, complete, in-order event path issued zero final
`process/read` calls.
## Compatibility and recovery
- new servers send `sandboxDenied` on `process/exited`
- legacy servers omit it, which triggers one compatibility
`process/read`
- broadcast lag or a sequence gap triggers a retained-output read
- recovery remains bounded by the server's existing 1 MiB
retained-output window
- complete, in-order event streams issue no completion read
- sandbox denial is attached to the exit event before consumers can
observe process completion
- server-first and client-first rollouts remain wire-compatible;
server-first realizes the latency win immediately
## Integration coverage
The `TestCodex` suite exercises four distinct remote-exec contracts:
- complete pushed output/exit/close with zero reads
- direct pushed sandbox denial with zero reads
- legacy missing denial metadata with exactly one compatibility read
- count-bounded replay eviction recovered from retained output without
duplication
## Validation
- `just test -p codex-core
exec_command_consumes_pushed_remote_process_events`: 4 passed
- `just test -p codex-core unified_exec::process_tests::`: 4 passed
- `just test -p codex-exec-server`: 294 passed, 2 skipped
- `just test -p codex-exec-server-protocol`: 5 passed
- `just test -p codex-rmcp-client`: 89 passed, 2 skipped
- focused Bazel `//codex-rs/core:core-all-test`: passed across 16 shards
- scoped `just fix` passed for core and exec-server
- `just fmt` passed
The complete workspace suite was not rerun; focused Cargo and Bazel
coverage passed for the changed behavior.
2026-06-26 18:05:52 -07:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-03-26 15:45:36 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-13 09:59:08 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-03-26 15:45:36 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-16 07:57:51 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-16 07:57:51 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-13 09:59:08 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-27 18:31:39 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-27 18:31:39 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-07-27 18:31:39 +00:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
2026-03-26 15:45:36 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-13 09:59:08 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-22 18:33:28 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-04-13 00:31:13 -07:00
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Add attributed exec process lifecycle telemetry (#42373)
## Why
Exec-server process and network-policy events need stable attribution to the
launching tool call and executor without recording process payloads.
## What changed
- Add optional `ExecMetadata` to `ExecParams` and propagate the thread and tool
call IDs from unified exec.
- Emit bounded OpenTelemetry events for process start, spawn failure, sandbox
denial, and exit. Correlate them with the launch trace and registry-issued
executor identity while excluding arguments, paths, environment values,
output, and error text.
- Preserve launch attribution across long-running processes and reconnects, and
attach the same metadata to network-policy audit events.
- Keep the protocol backward compatible when metadata is omitted, and prevent
invalid trace headers from inheriting an unrelated active span.
## Testing
Add coverage for metadata serialization and propagation, lifecycle event
fields, trace relationships, reconnect behavior, spawn failures, sandbox
denials, and network-policy attribution.
GitOrigin-RevId: 7aa480a7289c73cb95e2c124c35500bb6f0d5084
2026-09-02 20:32:12 +00:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-22 17:02:33 -07:00
|
|
|
|
Cache shell snapshots in the exec server (#39756)
## What changed
- Add the `shellSnapshotV2` executor capability and an optional shell snapshot request to `ExecParams`.
- Capture and restore Unix shell state and profile exports from an in-memory, attachment-scoped cache for `bash`, `zsh`, and `sh`.
- Apply environment policies, runtime `PATH` entries, sandbox context, and live managed-proxy settings when preparing restored commands.
- Bound snapshot size, capture time, scope length, and cache capacity, and fall back to the original command when capture fails.
## Testing
- Cover local, remote, TTY, sandboxed, and supported-shell execution, plus environment filtering, proxy handling, in-memory reuse, and capture failure fallback.
GitOrigin-RevId: 624f747972c249c88c6f10f42cf0af97b75b5541
2026-08-20 17:13:03 +00:00
|
|
|
|
2026-04-13 09:59:08 +01:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-06-21 11:33:21 +01:00
|
|
|
|
|
|
|
|
|
2026-06-23 20:07:09 +01:00
|
|
|
|
2026-07-17 21:09:50 +00:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[codex] consume pushed exec-server process events (#30273)
## Summary
- complete unified-exec processes from the ordered event stream instead
of issuing a final zero-wait `process/read`
- add optional executor sandbox-denial state to `process/exited`
- retain `process/read` as a retained-output and compatibility fallback
for receiver lag, sequence gaps, and legacy servers
- recover sandbox-denial state across transport reconnection
- cover the real `TestCodex` remote-exec path without adding a public
test-only event constructor
## Why
A successful one-shot tool call currently receives its output and
terminal notifications, then pays another wide-area `process/read` round
trip before returning. Staging traces showed that remote response wait
accounted for more than 99.8% of RPC time; local serialization,
queueing, and deserialization were below 0.6 ms.
## Measured impact
A direct staging A/B used the same build and route and changed only
completion mode. Each arm ran three times with 30 one-shot
`/usr/bin/true` calls per run. The table reports the median of the three
per-run percentiles.
| Metric | Final `process/read` | Pushed events | Change |
| --- | ---: | ---: | ---: |
| End-to-end completion p50 | 159.5 ms | 118.7 ms | -40.8 ms (-25.6%) |
| End-to-end completion p95 | 182.4 ms | 131.7 ms | -50.6 ms (-27.8%) |
| Completion-wait p50 | 80.1 ms | 41.5 ms | -38.5 ms (-48.1%) |
| Final `process/read` RPC p50 | 79.9 ms | eliminated | -79.9 ms |
TCP_NODELAY was enabled in both A/B arms, so its effect cancels out. The
successful, complete, in-order event path issued zero final
`process/read` calls.
## Compatibility and recovery
- new servers send `sandboxDenied` on `process/exited`
- legacy servers omit it, which triggers one compatibility
`process/read`
- broadcast lag or a sequence gap triggers a retained-output read
- recovery remains bounded by the server's existing 1 MiB
retained-output window
- complete, in-order event streams issue no completion read
- sandbox denial is attached to the exit event before consumers can
observe process completion
- server-first and client-first rollouts remain wire-compatible;
server-first realizes the latency win immediately
## Integration coverage
The `TestCodex` suite exercises four distinct remote-exec contracts:
- complete pushed output/exit/close with zero reads
- direct pushed sandbox denial with zero reads
- legacy missing denial metadata with exactly one compatibility read
- count-bounded replay eviction recovered from retained output without
duplication
## Validation
- `just test -p codex-core
exec_command_consumes_pushed_remote_process_events`: 4 passed
- `just test -p codex-core unified_exec::process_tests::`: 4 passed
- `just test -p codex-exec-server`: 294 passed, 2 skipped
- `just test -p codex-exec-server-protocol`: 5 passed
- `just test -p codex-rmcp-client`: 89 passed, 2 skipped
- focused Bazel `//codex-rs/core:core-all-test`: passed across 16 shards
- scoped `just fix` passed for core and exec-server
- `just fmt` passed
The complete workspace suite was not rerun; focused Cargo and Bazel
coverage passed for the changed behavior.
2026-06-26 18:05:52 -07:00
|
|
|
|
Resume exec-server sessions after disconnect (#28512)
Supersedes #28288 (closed).
## Why
A short WebSocket interruption currently ends every client-side process
handle, even though exec-server keeps the server session and its
processes alive for a short time.
This is especially visible for executor-backed stdio MCP servers: a
temporary connection loss becomes a permanent `Transport closed` error.
The server already has the information needed to resume the session, but
the client opens a fresh session instead of using it.
This change reconnects below the process and MCP layers. Existing
process handles stay valid, missed output is recovered, and the same
server-side processes continue running.
## State machine
One logical `ExecServerClient` stays alive while its underlying RPC
connection changes generations.
```text
transport closes
+------------------------------------------------+
| v
+-------------+ +-------------+
| Connected | | Recovering |
+-------------+ +-------------+
^ |
| session resumed, processes caught up | retryable error
+------------------------------------------------+ loops until deadline
|
| deadline or permanent error
v
+-------------+
| Failed |
+-------------+
```
### `Connected`
- New RPC calls use the current connection.
- Process notifications are published in sequence order.
- A disconnect only starts recovery if it came from the current
connection generation. Late events from older generations cannot replace
the active connection.
### `Recovering`
- New calls wait instead of choosing a half-connected RPC client.
- Existing process handles, wake subscriptions, and event subscriptions
stay open.
- Streaming HTTP response bodies fail immediately because their byte
streams cannot be resumed safely.
- Recovery first waits for process starts that were already in flight. A
start whose result became ambiguous is cleaned up after reconnection
instead of being silently adopted.
- The client reconnects with the learned `session_id`. The server may
briefly report that the old connection is still attached, so that error
is retried until the detach finishes.
- The notification consumer starts before the resume handshake
completes. This prevents a busy process from filling the notification
queue and blocking the initialize response.
- Before installing the new connection, the client catches up every
recoverable process with `process/read`.
### `Failed`
- Recovery stops after 25 seconds or after a permanent error.
- Waiting calls are released with one stable disconnect error.
- Existing process sessions receive a terminal failure instead of
waiting forever.
## Recovering process events
Output, exit, and close events share one sequence. During normal
operation, the client buffers early events until every lower sequence
has been published.
After reconnection, the client reads each process starting after its
last published sequence:
1. Retained output chunks are inserted by sequence number.
2. Exit and close state are reconstructed in their sequence positions.
3. Events already received as live notifications are ignored as
duplicates.
4. Newly contiguous events are published in order.
5. If the server no longer retains enough output to fill a sequence gap,
only that process is terminated and failed. The recovered connection
remains usable for other processes.
The server reports its full next event sequence for unbounded reads,
including exit and close events. Closed processes remain readable for
the same 30-second window used to retain detached sessions.
## Other details
- Detached server sessions are retained for 30 seconds, leaving margin
around the client's 25-second recovery deadline.
- Session attach and detach update the active notification sender under
the same attachment lock, so an old connection cannot clear a newly
attached sender.
- A dedicated error code distinguishes the temporary "session is still
attached" race from permanent initialization errors.
- Process starts are identity-checked on both client and server. Cleanup
from an older start cannot remove a newer process that reused the same
ID.
- Mutating requests that were already in flight when the transport
closed are not replayed, because the client cannot know whether the
server applied them. Requests started after recovery is known wait for
the replacement connection.
- We assume the server/client version stays in sync (on the before/after
this PR)
## User impact
Long-running commands and stdio MCP servers can survive a temporary
exec-server WebSocket interruption without changing process IDs or
losing output produced during the outage.
2026-06-17 09:20:39 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-20 16:24:06 -07:00
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
2026-04-13 00:31:13 -07:00
|
|
|
|
|
|
|
|
|
2026-03-19 20:13:08 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-13 00:31:13 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-04-17 12:07:43 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
fix(exec-server): retain output until streams close (#18946)
## Why
A Mac Bazel run hit a flake in
`server::handler::tests::output_and_exit_are_retained_after_notification_receiver_closes`
where the read path observed process exit but lost the expected buffered
stdout (`first\nsecond\n`). See the [GitHub Actions
job](https://github.com/openai/codex/actions/runs/24758468552/job/72436716505)
and [BuildBuddy
invocation](https://app.buildbuddy.io/invocation/37475a12-4ef2-45fb-ab8a-e49a2aba1d59).
The underlying race is that process exit is not the same thing as
stdout/stderr closure. If a child or grandchild inherits the pipe write
end, or a process duplicates it with `dup2`, the watched process can
exit while the stream is still open and more output can still arrive.
The exec-server was starting exited-process retention cleanup from the
exit event, so the process entry could be removed before the output
streams had actually closed.
While stress-testing the exec-server unit suite,
`server::handler::tests::long_poll_read_fails_after_session_resume`
exposed a separate test race: it started a short-lived command that
could exit and wake the pending long-poll read before the session-resume
assertion observed the resumed-session error. That test is intended to
cover resume eviction, not process-exit delivery, so this change keeps
the process alive and quiet while the second connection resumes the
session.
## What changed
- Keep exec-server process entries retained until stdout/stderr streams
close, then start the post-exit retention timer from the closed event.
- Wake long-poll readers when the closed event is emitted.
- Add focused `local_process` unit coverage that proves late output is
still retained after the short test retention interval has elapsed, and
that closed process entries are eventually evicted.
- Add a local and remote regression test where a parent exits while a
child keeps inherited stdout open. The child waits on an explicit
release file, so the test deterministically observes exit first,
releases the child, then requires a nonzero-wait read from the exit
sequence to receive the late output.
- In `codex-rs/exec-server/src/server/handler/tests.rs`, make
`long_poll_read_fails_after_session_resume` run a long-lived silent
command instead of a short command that prints and exits. This isolates
the test to session-resume behavior and prevents a normal process exit
from satisfying the pending long-poll read first.
## Testing
- `cargo test -p codex-exec-server
exec_process_retains_output_after_exit_until_streams_close`
- `cargo test -p codex-exec-server local_process::tests`
- `cargo test -p codex-exec-server`
- `just fix -p codex-exec-server`
- `bazel test //codex-rs/exec-server:exec-server-unit-tests
//codex-rs/exec-server:exec-server-exec_process-test
//codex-rs/exec-server:exec-server-file_system-test
//codex-rs/exec-server:exec-server-http_client-test
//codex-rs/exec-server:exec-server-initialize-test
//codex-rs/exec-server:exec-server-process-test
//codex-rs/exec-server:exec-server-websocket-test`
- `bazel test --runs_per_test=25
//codex-rs/exec-server:exec-server-unit-tests`
## Documentation
No docs update needed; this is an internal exec-server correctness fix.
2026-04-23 12:49:58 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-13 00:31:13 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-20 22:30:44 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
2026-04-16 10:30:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-07-27 18:31:39 +00:00
|
|
|
|
|
|
|
|
|
2026-06-09 15:10:17 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
2026-04-13 00:31:13 -07:00
|
|
|
|
|
|
|
|
|
feat: exec-server prep for unified exec (#15691)
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
2026-03-26 14:22:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|