kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/fs/ext4/inline.c

1884 lines
45 KiB
Raw Normal View History

ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: zero out inline data using memset() instead of empty_zero_page Not all architectures (in particular, sparc64) have empty_zero_page. So instead of copying from empty_zero_page, use memset to clear the inline data by signalling to ext4_xattr_set_entry() via a magic pointer value, EXT4_ZERO_ATTR_VALUE, which is defined by casting -1 to a pointer. This fixes a build failure on sparc64, and the memset() should be more efficient than using memcpy() anyway. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-11 03:31:49 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: add read support for inline data Let readpage and readpages handle the case when we want to read an inlined file. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:52 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: add journalled write support for inline data Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: add delalloc support for inline data For delayed allocation mode, we write to inline data if the file is small enough. And in case of we write to some offset larger than the inline size, the 1st page is dirtied, so that ext4_da_writepages can handle the conversion. When the 1st page is initialized with blocks, the inline part is removed. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:57 -05:00
ext4: add normal write support for inline data For a normal write case (not journalled write, not delayed allocation), we write to the inline if the file is small and convert it to an extent based file when the write is larger than the max inline size. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:51 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: return ENOMEM if sb_getblk() fails The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So ENOMEM is more appropriate than EIO. In addition, make sure that the file system is marked as being inconsistent if sb_getblk() fails. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2013-01-12 16:19:36 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-23 17:07:38 -05:00
ext4: let ext4_readdir handle inline data For "." and "..", we just call filldir by ourselves instead of iterating the real dir entry. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: let ext4_rename handle inline dir In case we rename a directory, ext4_rename has to read the dir block and change its dotdot's information. The old ext4_rename encapsulated the dir_block read into itself. So this patch adds a new function ext4_get_first_dir_block() which gets the dir buffer information so the ext4_rename can handle it properly. As it will also change the parent inode number, we return the parent_de so that ext4_rename() can handle it more easily. ext4_find_entry is also changed so that the caller(rename) can tell whether the found entry is an inlined one or not and journaling the corresponding buffer head. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
ext4: let add_dir_entry handle inline data properly This patch let add_dir_entry handle the inline data case. So the dir is initialized as inline dir first and then we can try to add some files to it, when the inline space can't hold all the entries, a dir block will be created and the dir entry will be moved to it. Also for an inlined dir, "." and ".." are removed and we only use 4 bytes to store the parent inode number. These 2 entries will be added when we convert an inline dir to a block-based one. [ Folded in patch from Dan Carpenter to remove an unused variable. ] Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:05:59 -05:00
ext4: let ext4_find_entry handle inline data Create a new function ext4_find_inline_entry() to handle the case of inline data. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
ext4: let ext4_delete_entry() handle inline data Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:00 -05:00
ext4: let empty_dir handle inline dir empty_dir is used when deleting a dir. So it should handle inline dir properly. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:01 -05:00
ext4: add the basic function for inline data support Implement inline data with xattr. Now we use "system.data" to store xattr, and the xattr will be extended if the i_size is increased while we don't release the space during truncate. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:04:46 -05:00
ext4: let fiemap work with inline data fiemap is used to find the disk layout of a file, as for inline data, let us just pretend like a file with just one extent. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: evict inline data out if we need to strore xattr in inode Now we that store data in the inode, in case we need to store some xattrs and inode doesn't have enough space, Andreas suggested that we should keep the xattr(metadata) in and data should be pushed out. So this patch does the work. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: let ext4_truncate handle inline data correctly Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: let ext4_truncate handle inline data correctly Signed-off-by: Robin Dong <sanbai@taobao.com> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:02 -05:00
ext4: let fallocate handle inline data correctly If we are punching hole in a file, we will return ENOTSUPP. As for the fallocation of some extents, we will convert the inline data to a normal extent based file first. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00
ext4: pass context information to jbd2__journal_start() So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-02-08 21:59:22 -05:00
ext4: let fallocate handle inline data correctly If we are punching hole in a file, we will return ENOTSUPP. As for the fallocation of some extents, we will convert the inline data to a normal extent based file first. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 14:06:03 -05:00