kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/include/debug/tegra.S

223 lines
6.7 KiB
Raw Normal View History

[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00