kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/include/net/libeth/xdp.h

827 lines
23 KiB
Raw Normal View History

libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00
libeth: xdp: add .ndo_xdp_xmit() helpers Add helpers for implementing .ndo_xdp_xmit(). Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack, then flush. If DMA mapping is failed for some reason, don't try mapping further frames, but still flush what was already prepared. DMA address of a head frame is stored in its headroom, assuming it has enough of it for an 8 (or 4) byte value. In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also needs @finalize to kick the XDPSQ after filling. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:22 +02:00
libeth: xdp: add XDP_TX buffers sending Start adding XDP-specific code to libeth, namely handling XDP_TX buffers (only sending). The idea is that we accumulate up to 16 buffers on the stack, then, if either the limit is reached or the polling is finished, flush them at once with only one XDPSQ cleaning (if needed). The main sending function will be aware of the sending budget and already have all the info to send the buffers, so it can't fail. Drivers need to provide 2 inline callbacks to the main sending function: for cleaning an XDPSQ and for filling descriptors; the library code takes care of the rest. Note that unlike the generic code, multi-buffer support is not wrapped here with unlikely() to not hurt header split setups. &libeth_xdp_buff is a simple extension over &xdp_buff which has a direct pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL size and 16-byte alignment on x86_64). Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-12 18:02:21 +02:00