linux

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] LOG2: Implement a general integer log2 facility in the kernel This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-12-08 02:37:49 -08:00

split the typecheck macros out of include/linux/kernel.h Needed to fix up a recursive include snafu in locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 01:45:24 -07:00

printk ratelimiting rewrite All ratelimit user use same jiffies and burst params, so some messages (callbacks) will be lost. For example: a call printk_ratelimit(5 * HZ, 1) b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will will be supressed. - rewrite __ratelimit, and use a ratelimit_state as parameter. Thanks for hints from andrew. - Add WARN_ON_RATELIMIT, update rcupreempt.h - remove __printk_ratelimit - use __ratelimit in net_ratelimit Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 01:45:58 -07:00

dynamic debug: combine dprintk and dynamic printk This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-02-05 11:51:38 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] fix linux banner format string Revert previous attempts at messing with the linux banner string and simply use a separate format string for proc. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Olaf Hering <olaf@aepfle.de> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2007-01-10 14:45:28 +01:00

ipc: add definitions of USHORT_MAX and others Add definitions of USHORT_MAX and others into kernel. ipc uses it and slub implementation might also use it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Cc: Nadia Derbey <Nadia.Derbey@bull.net> Cc: "Pierre Peiffer" <peifferp@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-04-29 01:00:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-23 02:03:26 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Fix 'ALIGN()' macro, take 2 You wouldn't think that doing an ALIGN() macro that aligns something up to a power-of-two boundary would be likely to have bugs, would you? But hey, in the wonderful world of mixing integer types, you have to be careful. This just makes sure that the alignment is interpreted in the same type as the thing to be aligned. Thanks to Roland Dreier, who noticed that the amso1100 driver got broken by the previous fix (that just extended the mask to "unsigned long", but was still broken in "unsigned long long" - it just happened to be the same on 64-bit architectures). See commit 4c8bd7eeee4c8f157fb61fb64b57500990b42e0e for the history of bugs here... Acked-by: Roland Dreier <rdreier@cisco.com> Cc: Andrew Morton <akpm@osdl.org> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-11-26 19:05:22 -08:00

PTR_ALIGN The AdvanSys driver wants to align some pointers, and the ALIGN macro doesn't work for pointers. Rather than try to make it work, add a new PTR_ALIGN macro which is typesafe. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-09-11 15:23:47 -07:00

Avoid divide in IS_ALIGN I was happy to discover the brand new IS_ALIGN macro and quickly used it in my code. To my dismay I found that the generated code used division to perform the test. This patch fixes it by changing the % test to an &. This avoids the division. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-06 01:37:05 -08:00

Fix 'ALIGN()' macro, take 2 You wouldn't think that doing an ALIGN() macro that aligns something up to a power-of-two boundary would be likely to have bugs, would you? But hey, in the wonderful world of mixing integer types, you have to be careful. This just makes sure that the alignment is interpreted in the same type as the thing to be aligned. Thanks to Roland Dreier, who noticed that the amso1100 driver got broken by the previous fix (that just extended the mask to "unsigned long", but was still broken in "unsigned long long" - it just happened to be the same on 64-bit architectures). See commit 4c8bd7eeee4c8f157fb61fb64b57500990b42e0e for the history of bugs here... Acked-by: Roland Dreier <rdreier@cisco.com> Cc: Andrew Morton <akpm@osdl.org> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-11-26 19:05:22 -08:00

ARRAY_SIZE: check for type We can use a gcc extension to ensure that ARRAY_SIZE() is handed an array, not a pointer. This is especially important when code is changed from a fixed array to a pointer. I assume the Intel compiler doesn't support __builtin_types_compatible_p. [jdike@addtoit.com: uml: update UML definition of ARRAY_SIZE] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-06 14:51:05 -07:00

[PATCH] x86_64: reliable stack trace support These are the generic bits needed to enable reliable stack traces based on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will enable x86-64 and i386 to make use of this. Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities for improvement. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-26 13:57:28 +02:00

[PATCH] add DIV_ROUND_UP() Add the DIV_ROUND_UP() helper macro: divide `n' by `d', rounding up. Stolen from the gfs2 tree(!) because the swsusp patches need it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-25 23:32:40 -07:00

[PATCH] FDPIC: Move roundup() into linux/kernel.h Move the roundup() macro from binfmt_elf.c into linux/kernel.h as it's generally useful. [akpm@osdl.org: nuke all the other implementations] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-07-10 04:44:54 -07:00

Create a DIV_ROUND_CLOSEST macro to do division with rounding Create a helper macro to divide two numbers and round the result to the nearest whole number. This is a helper macro for hwmon drivers that want to convert incoming sysfs values per standard hwmon practice, though the macro itself can be used by anyone. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-06 14:40:51 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Move _RET_IP_ and _THIS_IP_ to include/linux/kernel.h These two macros are useful beyond lock debugging. Moved definitions from include/linux/debug_locks.h to include/linux/kernel.h, so code that needs them does not have to include the former, which would have been a less intuitive choice of a header. Signed-off-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-05 12:14:23 +03:00

block: rename CONFIG_LBD to CONFIG_LBDAF Follow-up to "block: enable by default support for large devices and files on 32-bit archs". Rename CONFIG_LBD to CONFIG_LBDAF to: - allow update of existing [def]configs for "default y" change - reflect that it is used also for large files support nowadays Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2009-06-19 08:08:50 +02:00

[BLOCK] Move sector_div() from blkdev.h to kernel.h We need it even if CONFIG_BLOCK is disabled, so move it outside of the block layer include system. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

2007-10-12 12:40:38 +02:00

add upper-32-bits macro We keep on getting "right shift count >= width of type" warnings when doing things like sector_t s; x = s >> 56; because with CONFIG_LBD=n, s is only 32-bit. Similar problems can occur with dma_addr_t's. So add a simple wrapper function which code can use to avoid this warning. The above example would become x = upper_32_bits(s) >> 24; The first user is in fact AFS. Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: "Cameron, Steve" <Steve.Cameron@hp.com> Cc: "Miller, Mike (OS Dev)" <Mike.Miller@hp.com> Cc: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 03:15:18 -07:00

introduce lower_32_bits() macro The file kernel.h contains the upper_32_bits macro. This patch adds the other part, the lower_32_bits macro. Its first use will be in the driver for AMD IOMMU. Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-29 22:33:42 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

printk: Add KERN_DEFAULT printk log-level This adds a KERN_DEFAULT loglevel marker, for when you cannot decide which loglevel you want, and just want to keep an existing printk with the default loglevel. The difference between having KERN_DEFAULT and having no log-level marker at all is two-fold: - having the log-level marker will now force a new-line if the previous printout had not added one (perhaps because it forgot, but perhaps because it expected a continuation) - having a log-level marker is required if you are printing out a message that otherwise itself could perhaps otherwise be mistaken for a log-level. Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-06-16 11:02:28 -07:00

printk: add KERN_CONT annotation printk: add the KERN_CONT annotation (which is empty string but via which checkpatch.pl can notice that the lacking KERN_ level is fine). This useful for multiple calls of hand-crafted printk output done by early debug code or similar. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:30:29 -07:00

printk: clean up handling of log-levels and newlines It used to be that we would only look at the log-level in a printk() after explicit newlines, which can cause annoying problems when the previous printk() did not end with a '\n'. In that case, the log-level marker would be just printed out in the middle of the line, and be seen as just noise rather than change the logging level. This changes things to always look at the log-level in the first bytes of the printout. If a log level marker is found, it is always used as the log-level. Additionally, if no newline existed, one is added (unless the log-level is the explicit KERN_CONT marker, to explicitly show that it's a continuation of a previous line). Acked-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-06-16 10:57:02 -07:00

printk: add KERN_CONT annotation printk: add the KERN_CONT annotation (which is empty string but via which checkpatch.pl can notice that the lacking KERN_ level is fine). This useful for multiple calls of hand-crafted printk output done by early debug code or similar. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:30:29 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] dump_thread() cleanup ) From: Adrian Bunk <bunk@stusta.de> - create one common dump_thread() prototype in kernel.h - dump_thread() is only used in fs/binfmt_aout.c and can therefore be removed on all architectures where CONFIG_BINFMT_AOUT is not available Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-01-09 20:51:37 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

move kernel-doc comment for might_sleep directly before its defining block Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-08-12 15:08:59 -07:00

kernel.h: fix might_sleep kernel-doc Put the kernel-doc for might_sleep() _immediately_ before the macro (no intervening lines). Otherwise kernel-doc complains like so: Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'file' Warning(linux-2.6.27-rc3-git2//include/linux/kernel.h:129): No description found for parameter 'line' because kernel-doc is looking at the wrong function prototype (i.e., __might_sleep). [Yes, I have a todo note to myself to check/warn for that inconsistency in scripts/kernel-doc.] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-10-29 14:01:15 -07:00

sched: Add a preempt count base offset to __might_sleep() Add a preempt count base offset to compare against the current preempt level count. It prepares to pull up the might_sleep check from cond_resched() to cond_resched_lock() and cond_resched_bh(). For these two helpers, we need to respectively ensure that once we'll unlock the given spinlock / reenable local softirqs, we will reach a sleepable state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> [ Move and rename preempt_count_equals() ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1247725694-6082-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-07-16 15:44:29 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

fix spelling error in include/linux/kernel.h Signed-off-by: Adrian Bunk <bunk@stusta.de>

2006-11-30 04:46:13 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] sched: voluntary kernel preemption This patch adds a new preemption model: 'Voluntary Kernel Preemption'. The 3 models can be selected from a new menu: (X) No Forced Preemption (Server) ( ) Voluntary Kernel Preemption (Desktop) ( ) Preemptible Kernel (Low-Latency Desktop) we still default to the stock (Server) preemption model. Voluntary preemption works by adding a cond_resched() (reschedule-if-needed) call to every might_sleep() check. It is lighter than CONFIG_PREEMPT - at the cost of not having as tight latencies. It represents a different latency/complexity/overhead tradeoff. It has no runtime impact at all if disabled. Here are size stats that show how the various preemption models impact the kernel's size: text data bss dec hex filename 3618774 547184 179896 4345854 424ffe vmlinux.stock 3626406 547184 179896 4353486 426dce vmlinux.voluntary +0.2% 3748414 548640 179896 4476950 445016 vmlinux.preempt +3.5% voluntary-preempt is +0.2% of .text, preempt is +3.5%. This feature has been tested for many months by lots of people (and it's also included in the RHEL4 distribution and earlier variants were in Fedora as well), and it's intended for users and distributions who dont want to use full-blown CONFIG_PREEMPT for one reason or another. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-06-25 14:57:39 -07:00

sched: Add a preempt count base offset to __might_sleep() Add a preempt count base offset to compare against the current preempt level count. It prepares to pull up the might_sleep check from cond_resched() to cond_resched_lock() and cond_resched_bh(). For these two helpers, we need to respectively ensure that once we'll unlock the given spinlock / reenable local softirqs, we will reach a sleepable state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> [ Move and rename preempt_count_equals() ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1247725694-6082-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-07-16 15:44:29 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

sched: Add a preempt count base offset to __might_sleep() Add a preempt count base offset to compare against the current preempt level count. It prepares to pull up the might_sleep check from cond_resched() to cond_resched_lock() and cond_resched_bh(). For these two helpers, we need to respectively ensure that once we'll unlock the given spinlock / reenable local softirqs, we will reach a sleepable state. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> [ Move and rename preempt_count_equals() ] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1247725694-6082-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-07-16 15:44:29 +02:00

[PATCH] sched: voluntary kernel preemption This patch adds a new preemption model: 'Voluntary Kernel Preemption'. The 3 models can be selected from a new menu: (X) No Forced Preemption (Server) ( ) Voluntary Kernel Preemption (Desktop) ( ) Preemptible Kernel (Low-Latency Desktop) we still default to the stock (Server) preemption model. Voluntary preemption works by adding a cond_resched() (reschedule-if-needed) call to every might_sleep() check. It is lighter than CONFIG_PREEMPT - at the cost of not having as tight latencies. It represents a different latency/complexity/overhead tradeoff. It has no runtime impact at all if disabled. Here are size stats that show how the various preemption models impact the kernel's size: text data bss dec hex filename 3618774 547184 179896 4345854 424ffe vmlinux.stock 3626406 547184 179896 4353486 426dce vmlinux.voluntary +0.2% 3748414 548640 179896 4476950 445016 vmlinux.preempt +3.5% voluntary-preempt is +0.2% of .text, preempt is +3.5%. This feature has been tested for many months by lots of people (and it's also included in the RHEL4 distribution and earlier variants were in Fedora as well), and it's intended for users and distributions who dont want to use full-blown CONFIG_PREEMPT for one reason or another. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-06-25 14:57:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] remove unlikely() in might_sleep_if() The likely() profiling tools show that __alloc_page() causes a lot of misses: ! 132 119193 __alloc_pages():mm/page_alloc.c@937 Because most __alloc_page() calls are not atomic. Signed-off-by: Hua Zhong <hzhong@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-23 02:05:42 -07:00

[PATCH] sched: voluntary kernel preemption This patch adds a new preemption model: 'Voluntary Kernel Preemption'. The 3 models can be selected from a new menu: (X) No Forced Preemption (Server) ( ) Voluntary Kernel Preemption (Desktop) ( ) Preemptible Kernel (Low-Latency Desktop) we still default to the stock (Server) preemption model. Voluntary preemption works by adding a cond_resched() (reschedule-if-needed) call to every might_sleep() check. It is lighter than CONFIG_PREEMPT - at the cost of not having as tight latencies. It represents a different latency/complexity/overhead tradeoff. It has no runtime impact at all if disabled. Here are size stats that show how the various preemption models impact the kernel's size: text data bss dec hex filename 3618774 547184 179896 4345854 424ffe vmlinux.stock 3626406 547184 179896 4353486 426dce vmlinux.voluntary +0.2% 3748414 548640 179896 4476950 445016 vmlinux.preempt +3.5% voluntary-preempt is +0.2% of .text, preempt is +3.5%. This feature has been tested for many months by lots of people (and it's also included in the RHEL4 distribution and earlier variants were in Fedora as well), and it's intended for users and distributions who dont want to use full-blown CONFIG_PREEMPT for one reason or another. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-06-25 14:57:39 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Make sure the value in abs() does not get truncated if it is greater than 2^32 abs() will truncate the input if is it outside the 2^32 range. Fix that by assuming `long' input. This might generate worse code in the common case. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:44:03 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

x86: some lock annotations for user copy paths, v2 - introduce might_fault() - handle the atomic user copy paths correctly [ mingo@elte.hu: move might_sleep() outside of in_atomic(). ] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-09-10 13:37:17 +02:00

[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-27 01:16:30 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

x86: Support __attribute__((__cold__)) in gcc 4.3 gcc 4.3 supports a new __attribute__((__cold__)) to mark functions cold. Any path directly leading to a call of this function will be unlikely. And gcc will try to generate smaller code for the function itself. Please use with care. The code generation advantage isn't large and in most cases it is not worth uglifying code with this. This patch marks some common error functions like panic(), printk() as cold. This will longer term make many unlikely()s unnecessary, although we can keep them for now for older compilers. BUG is not marked cold because there is currently no way to tell gcc to mark a inline function told. Also all __init and __exit functions are marked cold. With a non -Os build this will tell the compiler to generate slightly smaller code for them. I think it currently only uses less alignments for labels, but that might change in the future. One disadvantage over *likely() is that they cannot be easily instrumented to verify them. Another drawback is that only the latest gcc 4.3 snapshots support this. Unfortunately we cannot detect this using the preprocessor. This means older snapshots will fail now. I don't think that's a problem because they are unreleased compilers that nobody should be using. gcc also has a __hot__ attribute, but I don't see any sense in using this in the kernel right now. But someday I hope gcc will be able to use more aggressive optimizing for hot functions even in -Os, if that happens it should be added. Includes compile fix from Thomas Gleixner. Cc: Jan Hubicka <jh@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-21 17:10:00 +02:00

[PATCH] pause_on_oops command line option Attempt to fix the problem wherein people's oops reports scroll off the screen due to repeated oopsing or to oopses on other CPUs. If this happens the user can reboot with the `pause_on_oops=<seconds>' option. It will allow the first oopsing CPU to print an oops record just a single time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs to enter a tight loop until the specified number of seconds have elapsed. The patch implements the infrastructure generically in the expectation that architectures other than x86 will find it useful. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-03-23 03:00:57 -08:00

Remove fastcall from linux/include [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:19:55 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-02-08 04:21:57 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Implement kasprintf Implement kasprintf, a kernel version of asprintf. This allocates the memory required for the formatted string, including the trailing '\0'. Returns NULL on allocation failure. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-25 05:49:17 -07:00

Add kvasprintf() Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-04-30 15:09:56 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

generic, memparse(): constify argument memparse()'s first argument can be const, so it should be. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-07-24 16:27:46 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] symbol_put_addr() locks kernel Even since a previous patch: Fix race between CONFIG_DEBUG_SLABALLOC and modules Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000) http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe The function symbol_put_addr() will deadlock the kernel. symbol_put_addr() would acquire modlist_lock, then while holding the lock call two functions kernel_text_address() and module_text_address() which also try to acquire the same lock. This deadlocks the kernel of course. This patch changes symbol_put_addr() to not acquire the modlist_lock, it doesn't need it since it never looks at the module list directly. Also, it now uses core_kernel_text() instead of kernel_text_address(). The latter has an additional check for addr inside a module, but we don't need to do that since we call module_text_address() (the same function kernel_text_address uses) ourselves. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Cc: Zwane Mwaikambo <zwane@fsmlabs.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-05-15 09:44:06 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

debug: add notifier chain debugging, v2 - unbreak ia64 (and powerpc) where function pointers dont point at code but at data (reported by Tony Luck) [ mingo@elte.hu: various cleanups ] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-08-15 15:29:38 -07:00

[PATCH] pid: make session_of_pgrp use struct pid instead of pid_t To properly implement a pid namespace I need to deal exclusively in terms of struct pid, because pid_t values become ambiguous. To this end session_of_pgrp is transformed to take and return a struct pid pointer. To avoid the need to worry about reference counting I now require my caller to hold the appropriate locks. Leaving callers repsonsible for increasing the reference count if they need access to the result outside of the locks. Since session_of_pgrp currently only has one caller and that caller simply uses only test the result for equality with another process group, the locking change means I don't actually have to acquire the tasklist_lock at all. tiocspgrp is also modified to take and release the lock. The logic there is a little more complicated but nothing I won't need when I convert pgrp of a tty to a struct pid pointer. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-12 00:52:56 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Introduce FW_BUG, FW_WARN and FW_INFO to consistenly tell users about BIOS bugs The idea is to add this to printk after the severity: printk(KERN_ERR FW_BUG "This is not our fault, BIOS developer: fix it by simply add ...\n"); If a Firmware issue should be hidden, because it is work-arounded, but you still want to see something popping up e.g. for info only: printk(KERN_INFO FW_INFO "This is done stupid, we can handle it, but it should better be avoided in future\n"); or on the Linuxfirmwarekit to tell vendors that they did something stupid or wrong without bothering the user: printk(KERN_INFO FW_BUG "This is done stupid, we can handle it, but it should better be avoided in future\n"); Some use cases: - If a user sees a [Firmware Bug] message in the kernel he should first update the BIOS before wasting time with debugging and submiting on old firmware code to mailing lists. - The linuxfirmwarekit (http://www.linuxfirmwarekit.org) tries to detect firmware bugs. It currently is doing that in userspace which results in: - Huge test scripts that could be a one liner in the kernel - A lot of BIOS bugs are already absorbed by the kernel What do we need such a stupid linuxfirmwarekit for? - Vendors: Can test their BIOSes for Linux compatibility. There will be the time when vendors realize that the test utils on Linux are more strict and using them increases the qualitity and stability of their products. - Vendors: Can easily fix up their BIOSes and be more Linux compatible by: dmesg |grep "Firmware Bug" and send the result to their BIOS developer colleagues who should know what the messages are about and how to fix them, without the need of studying kernel code. - Distributions: can do a first automated HW/BIOS checks. This can then be done without the need of asking kernel developers who need to dig down the code and explain the details. Certification can/will just be rejected until dmesg |grep "Firmware Bug" is empty. - Thus this can be used as an instrument to enforce cleaner BIOS code. Currently every stupid Windows ACPI bug is re-implemented in Linux which is a rather unfortunate situation. We already have the power to avoid this in e.g. memory or cpu hot-plug ACPI implementations, because Linux certification is a must for most vendors in the server area. Working towards being able to do that in the laptop area (vendors are starting to look at Linux here also and will use this tool) is the goal. At least provide them a tool to make it as easy for this guys (e.g. not needing to browse kernel code) as possible. - The ordinary Linux user: can go into the next shop, boots the firmwarekit on his most preferred machines. He chooses one without BIOS bugs. Unsupported HW is ok, he likes to try out latest projects which might support them or likes to dig on it on his own, but he hates to workaround broken BIOSes like hell. I double checked with the firmwarekit. There they have: So the mapping generally is (also depending on how likely the BIOS is to blame, this could sometimes be difficult): FW_INFO = INFO FW_WARN = WARN FW_BUG = FAIL For more info about the linuxfirmwarekit and why this is needed can be found here: http://www.linuxfirmwarekit.org While severity matches with the firmwarekit, it might be tricky to hide messages from the user. E.g. we recently found out that on HP BIOSes negative temperatures are returned, which seem to indicate that the thermal zone is invalid. We can work around that gracefully by ignoring the thermal zone and we do not want to bother the ordinary user with a frightening message: Firmware Bug: thermal management absolutely broken but want to hide it from the user. But in the linuxfirmwarekit this should be shown as a real show stopper (the temperatures could really be wrong, broken thermal management is one of the worst things that can happen and the BIOS guys of the machine must implement this properly). It is intended to do that (hide it from the user with KERN_INFO msg, but still print it as a BIOS bug) by: printk(KERN_INFO FW_BUG "Negativ temperature values detected. Try to workarounded, BIOS must get fixed\n"); Hope that works out..., no idea how to better hide it as printk is the only way to easily provide this functionality. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>

2008-09-01 14:27:02 +02:00

[PATCH] clean up kernel messages Arrange for all kernel printks to be no-ops. Only available if CONFIG_EMBEDDED. This patch saves about 375k on my laptop config and nearly 100k on minimal configs. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:02 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

x86: Support __attribute__((__cold__)) in gcc 4.3 gcc 4.3 supports a new __attribute__((__cold__)) to mark functions cold. Any path directly leading to a call of this function will be unlikely. And gcc will try to generate smaller code for the function itself. Please use with care. The code generation advantage isn't large and in most cases it is not worth uglifying code with this. This patch marks some common error functions like panic(), printk() as cold. This will longer term make many unlikely()s unnecessary, although we can keep them for now for older compilers. BUG is not marked cold because there is currently no way to tell gcc to mark a inline function told. Also all __init and __exit functions are marked cold. With a non -Os build this will tell the compiler to generate slightly smaller code for them. I think it currently only uses less alignments for labels, but that might change in the future. One disadvantage over *likely() is that they cannot be easily instrumented to verify them. Another drawback is that only the latest gcc 4.3 snapshots support this. Unfortunately we cannot detect this using the preprocessor. This means older snapshots will fail now. I don't think that's a problem because they are unreleased compilers that nobody should be using. gcc also has a __hot__ attribute, but I don't see any sense in using this in the kernel right now. But someday I hope gcc will be able to use more aggressive optimizing for hot functions even in -Os, if that happens it should be added. Includes compile fix from Thomas Gleixner. Cc: Jan Hubicka <jh@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-21 17:10:00 +02:00

printk_ratelimit() functions should use CONFIG_PRINTK Makes an embedded image a bit smaller. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:21:25 -08:00

printk ratelimiting rewrite All ratelimit user use same jiffies and burst params, so some messages (callbacks) will be lost. For example: a call printk_ratelimit(5 * HZ, 1) b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will will be supressed. - rewrite __ratelimit, and use a ratelimit_state as parameter. Thanks for hints from andrew. - Add WARN_ON_RATELIMIT, update rcupreempt.h - remove __printk_ratelimit - use __ratelimit in net_ratelimit Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-07-25 01:45:58 -07:00

printk_ratelimit() functions should use CONFIG_PRINTK Makes an embedded image a bit smaller. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:21:25 -08:00

printk: introduce printk_once() This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-02-05 13:45:43 +01:00

printk: add printk_delay to make messages readable for some scenarios When syslog is not possible, at the same time there's no serial/net console available, it will be hard to read the printk messages. For example oops/panic/warning messages in shutdown phase. Add a printk delay feature, we can make each printk message delay some milliseconds. Setting the delay by proc/sysctl interface: /proc/sys/kernel/printk_delay The value range from 0 - 10000, default value is 0 [akpm@linux-foundation.org: fix a few things] Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:43:33 -07:00

printk: introduce printk_once() This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-02-05 13:45:43 +01:00

printk_once(): use bool for boolean flag Using the type bool (instead of int) for the __print_once flag in the printk_once() macro matches the intent of the code better, and allows the compiler to generate smaller code; eg a typical callsite with gcc 4.3.3 on i386: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-6 (-6) function old new delta static.__print_once 4 1 -3 get_cpu_vendor 146 143 -3 Saving 6 bytes of object size per callsite by slightly improving the readability of the source seems like a win to me. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:43:46 -07:00

printk: introduce printk_once() This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-02-05 13:45:43 +01:00

printk_once(): use bool for boolean flag Using the type bool (instead of int) for the __print_once flag in the printk_once() macro matches the intent of the code better, and allows the compiler to generate smaller code; eg a typical callsite with gcc 4.3.3 on i386: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-6 (-6) function old new delta static.__print_once 4 1 -3 get_cpu_vendor 146 143 -3 Saving 6 bytes of object size per callsite by slightly improving the readability of the source seems like a win to me. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:43:46 -07:00

printk: introduce printk_once() This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-02-05 13:45:43 +01:00

kexec: add dmesg log symbols to /proc/vmcoreinfo lists It would be nice to be able to extract the dmesg log from a vmcore file without needing to keep the debug symbols for the running kernel handy all the time. We have a facility to do this in /proc/vmcore. This patch adds the log_buf and log_end symbols to the vmcoreinfo area so that tools (like makedumpfile) can easily extract the dmesg logs from a vmcore image. [akpm@linux-foundation.org: several fixes and cleanups] [akpm@linux-foundation.org: fix unused log_buf_kexec_setup()] [akpm@linux-foundation.org: build fix] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-04-02 16:58:57 -07:00

[PATCH] clean up kernel messages Arrange for all kernel printks to be no-ops. Only available if CONFIG_EMBEDDED. This patch saves about 375k on my laptop config and nearly 100k on minimal configs. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:02 -07:00

x86: Support __attribute__((__cold__)) in gcc 4.3 gcc 4.3 supports a new __attribute__((__cold__)) to mark functions cold. Any path directly leading to a call of this function will be unlikely. And gcc will try to generate smaller code for the function itself. Please use with care. The code generation advantage isn't large and in most cases it is not worth uglifying code with this. This patch marks some common error functions like panic(), printk() as cold. This will longer term make many unlikely()s unnecessary, although we can keep them for now for older compilers. BUG is not marked cold because there is currently no way to tell gcc to mark a inline function told. Also all __init and __exit functions are marked cold. With a non -Os build this will tell the compiler to generate slightly smaller code for them. I think it currently only uses less alignments for labels, but that might change in the future. One disadvantage over *likely() is that they cannot be easily instrumented to verify them. Another drawback is that only the latest gcc 4.3 snapshots support this. Unfortunately we cannot detect this using the preprocessor. This means older snapshots will fail now. I don't think that's a problem because they are unreleased compilers that nobody should be using. gcc also has a __hot__ attribute, but I don't see any sense in using this in the kernel right now. But someday I hope gcc will be able to use more aggressive optimizing for hot functions even in -Os, if that happens it should be added. Includes compile fix from Thomas Gleixner. Cc: Jan Hubicka <jh@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-21 17:10:00 +02:00

printk_ratelimit() functions should use CONFIG_PRINTK Makes an embedded image a bit smaller. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:21:25 -08:00

printk: introduce printk_once() This pattern shows up frequently in the kernel: static int once = 1; ... if (once) { once = 0; printk(KERN_ERR "message\n"); } ... So add a printk_once() helper macro that reduces this to a single line of: printk_once(KERN_ERR "message\n"); It works analogously to WARN_ONCE() & friends. (We use a macro not an inline because vararg expansion in inlines looks awkward and the macro is simple enough.) Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-02-05 13:45:43 +01:00

kexec: add dmesg log symbols to /proc/vmcoreinfo lists It would be nice to be able to extract the dmesg log from a vmcore file without needing to keep the debug symbols for the running kernel handy all the time. We have a facility to do this in /proc/vmcore. This patch adds the log_buf and log_end symbols to the vmcoreinfo area so that tools (like makedumpfile) can easily extract the dmesg logs from a vmcore image. [akpm@linux-foundation.org: several fixes and cleanups] [akpm@linux-foundation.org: fix unused log_buf_kexec_setup()] [akpm@linux-foundation.org: build fix] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Simon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-04-02 16:58:57 -07:00

[PATCH] clean up kernel messages Arrange for all kernel printks to be no-ops. Only available if CONFIG_EMBEDDED. This patch saves about 375k on my laptop config and nearly 100k on minimal configs. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-01 08:59:02 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

printk: robustify printk, fix fix: include/linux/kernel.h: In function ‘printk_needs_cpu': include/linux/kernel.h:217: error: parameter name omitted Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-08-11 14:38:12 +02:00

x86, generic: mark early_printk as asmlinkage It's not explicitly marked as asmlinkage, but invoked from x86_32 startup code with parameters on stack. No other architectures define early_printk and none of them are affected by this change, since defines asmlinkage as empty token. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-05-12 15:44:40 +02:00

x86: make early printk selectable on 64-bit as well Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2008-01-30 13:33:06 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Extract and use wake_up_klogd() Remove hack with printing space to wake up klogd. Use explicit wake_up_klogd(). See earlier discussion http://groups.google.com/group/fa.linux.kernel/browse_frm/thread/75f496668409f58d/1a8f28983a51e1ff?lnk=st&q=wake_up_klogd+group%3Afa.linux.kernel&rnum=2#1a8f28983a51e1ff Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-10 01:46:19 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] the scheduled unexport of panic_timeout Implement the scheduled unexport of panic_timeout. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-04-10 22:53:59 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] x86: Allow users to force a panic on NMI To quote Alan Cox: The default Linux behaviour on an NMI of either memory or unknown is to continue operation. For many environments such as scientific computing it is preferable that the box is taken out and the error dealt with than an uncorrected parity/ECC error get propogated. A small number of systems do generate NMI's for bizarre random reasons such as power management so the default is unchanged. In other respects the new proc/sys entry works like the existing panic controls already in that directory. This is separate to the edac support - EDAC allows supported chipsets to handle ECC errors well, this change allows unsupported cases to at least panic rather than cause problems further down the line. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andi Kleen <ak@suse.de>

2006-09-26 10:52:27 +02:00

x86: Add sysctl to allow panic on IOCK NMI error This patch introduces a new sysctl: /proc/sys/kernel/panic_on_io_nmi which defaults to 0 (off). When enabled, the kernel panics when the kernel receives an NMI caused by an IO error. The IO error triggered NMI indicates a serious system condition, which could result in IO data corruption. Rather than contiuing, panicing and dumping might be a better choice, so one can figure out what's causing the IO error. This could be especially important to companies running IO intensive applications where corruption must be avoided, e.g. a bank's databases. [ SuSE has been shipping it for a while, it was done at the request of a large database vendor, for their users. ] Signed-off-by: Kurt Garloff <garloff@suse.de> Signed-off-by: Roberto Angelino <robertangelino@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <20090624213211.GA11291@kroah.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-06-24 14:32:11 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Make the taint flags reliable It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-10-15 22:01:41 -07:00

mn10300: add the MN10300/AM33 architecture to the kernel Add architecture support for the MN10300/AM33 CPUs produced by MEI to the kernel. This patch also adds board support for the ASB2303 with the ASB2308 daughter board, and the ASB2305. The only processor supported is the MN103E010, which is an AM33v2 core plus on-chip devices. [akpm@linux-foundation.org: nuke cvs control strings] Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com> Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-02-08 04:19:31 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[ACPI] fix reboot upon suspend-to-disk http://bugzilla.kernel.org/show_bug.cgi?id=4320 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>

2005-12-01 04:29:00 -05:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Make the taint flags reliable It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-10-15 22:01:41 -07:00

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.

2008-10-17 09:50:12 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

x86: Support __attribute__((__cold__)) in gcc 4.3 gcc 4.3 supports a new __attribute__((__cold__)) to mark functions cold. Any path directly leading to a call of this function will be unlikely. And gcc will try to generate smaller code for the function itself. Please use with care. The code generation advantage isn't large and in most cases it is not worth uglifying code with this. This patch marks some common error functions like panic(), printk() as cold. This will longer term make many unlikely()s unnecessary, although we can keep them for now for older compilers. BUG is not marked cold because there is currently no way to tell gcc to mark a inline function told. Also all __init and __exit functions are marked cold. With a non -Os build this will tell the compiler to generate slightly smaller code for them. I think it currently only uses less alignments for labels, but that might change in the future. One disadvantage over *likely() is that they cannot be easily instrumented to verify them. Another drawback is that only the latest gcc 4.3 snapshots support this. Unfortunately we cannot detect this using the preprocessor. This means older snapshots will fail now. I don't think that's a problem because they are unreleased compilers that nobody should be using. gcc also has a __hot__ attribute, but I don't see any sense in using this in the kernel right now. But someday I hope gcc will be able to use more aggressive optimizing for hot functions even in -Os, if that happens it should be added. Includes compile fix from Thomas Gleixner. Cc: Jan Hubicka <jh@suse.cz> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-07-21 17:10:00 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

lib/hexdump Based on ace_dump_mem() from Grant Likely for the Xilinx SystemACE CompactFlash interface. Add print_hex_dump() & hex_dumper() to lib/hexdump.c and linux/kernel.h. This patch adds the functions print_hex_dump() & hex_dumper(). print_hex_dump() can be used to perform a hex + ASCII dump of data to syslog, in an easily viewable format, thus providing a common text hex dump format. hex_dumper() provides a dump-to-memory function. It converts one "line" of output (16 bytes of input) at a time. Example usages: print_hex_dump(KERN_DEBUG, DUMP_PREFIX_ADDRESS, frame->data, frame->len); hex_dumper(frame->data, frame->len, linebuf, sizeof(linebuf)); Example output using %DUMP_PREFIX_OFFSET: 0009ab42: 40414243 44454647 48494a4b 4c4d4e4f-@ABCDEFG HIJKLMNO Example output using %DUMP_PREFIX_ADDRESS: ffffffff88089af0: 70717273 74757677 78797a7b 7c7d7e7f-pqrstuvw xyz{|}~. [akpm@linux-foundation.org: cleanups, add export] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:39 -07:00

hexdump: more output formatting Add a prefix string parameter. Callers are responsible for any string length/alignment that they want to see in the output. I.e., callers should pad strings to achieve alignment if they want that. Add rowsize parameter. This is the number of raw data bytes to be printed per line. Must be 16 or 32. Add a groupsize parameter. This allows callers to dump values as 1-byte, 2-byte, 4-byte, or 8-byte numbers. Default is 1-byte numbers. If the total length is not an even multiple of groupsize, 1-byte numbers are printed. Add an "ascii" output parameter. This causes ASCII data output following the hex data output. Clean up some doc examples. Align the ASCII output on all lines that are produced by one call. Add a new interface, print_hex_dump_bytes(), that is a shortcut to print_hex_dump(), using default parameter values to print 16 bytes in byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-06-08 13:47:04 -07:00

hexdump: use const notation Trivial fix: mark the buffer to hexdump as const so callers could avoid casting their const buffers when calling print_hex_dump(). The patch is really trivial and I suggest to consider it as a fix (it fixes GCC warnings) and push it to current tree. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-08-07 23:43:14 +03:00

hexdump: more output formatting Add a prefix string parameter. Callers are responsible for any string length/alignment that they want to see in the output. I.e., callers should pad strings to achieve alignment if they want that. Add rowsize parameter. This is the number of raw data bytes to be printed per line. Must be 16 or 32. Add a groupsize parameter. This allows callers to dump values as 1-byte, 2-byte, 4-byte, or 8-byte numbers. Default is 1-byte numbers. If the total length is not an even multiple of groupsize, 1-byte numbers are printed. Add an "ascii" output parameter. This causes ASCII data output following the hex data output. Clean up some doc examples. Align the ASCII output on all lines that are produced by one call. Add a new interface, print_hex_dump_bytes(), that is a shortcut to print_hex_dump(), using default parameter values to print 16 bytes in byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-06-08 13:47:04 -07:00

hex_dump: add missing "const" qualifiers Add missing "const" qualifiers to the print_hex_dump_bytes() library routines. (akpm: rumoured to fix some compile warning somewhere) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-08-10 13:01:07 -07:00

lib: create common ascii hex array Add a common hex array in hexdump.c so everyone can use it. Add a common hi/lo helper to avoid the shifting masking that is done to get the upper and lower nibbles of a byte value. Pull the pack_hex_byte helper from kgdb as it is opencoded many places in the tree that will be consolidated. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-05-14 16:05:49 -07:00

lib/hexdump Based on ace_dump_mem() from Grant Likely for the Xilinx SystemACE CompactFlash interface. Add print_hex_dump() & hex_dumper() to lib/hexdump.c and linux/kernel.h. This patch adds the functions print_hex_dump() & hex_dumper(). print_hex_dump() can be used to perform a hex + ASCII dump of data to syslog, in an easily viewable format, thus providing a common text hex dump format. hex_dumper() provides a dump-to-memory function. It converts one "line" of output (16 bytes of input) at a time. Example usages: print_hex_dump(KERN_DEBUG, DUMP_PREFIX_ADDRESS, frame->data, frame->len); hex_dumper(frame->data, frame->len, linebuf, sizeof(linebuf)); Example output using %DUMP_PREFIX_OFFSET: 0009ab42: 40414243 44454647 48494a4b 4c4d4e4f-@ABCDEFG HIJKLMNO Example output using %DUMP_PREFIX_ADDRESS: ffffffff88089af0: 70717273 74757677 78797a7b 7c7d7e7f-pqrstuvw xyz{|}~. [akpm@linux-foundation.org: cleanups, add export] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-10 22:22:39 -07:00

Add 'pr_fmt()' format modifier to pr_xyz macros. A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-11-12 21:16:43 +01:00

introduce pr_cont() macro We cover all log-levels by pr_... macros except KERN_CONT one. Add it for convenience. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-03-31 15:23:51 -07:00

Make the pr_*() family of macros in kernel.h complete Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was defined multiple times in several other places Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Tony Lindgren <tony@atomide.com> Reviewed-by: Satyam Sharma <satyam@infradead.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-10-16 23:29:48 -07:00

dynamic debug: resurrect old pr_debug() semantics as pr_devel() pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Cc: Jason Baron <jbaron@redhat.com> Cc: Greg Banks <gnb@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-04-09 14:48:24 -07:00

pr_debug() should not be used in drivers pr_debug() should not be used from drivers, add comment saying that. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2006-08-08 01:37:15 +02:00

Make DEBUG take precedence over DYNAMIC_PRINTK_DEBUG Statically defined DEBUG should take precedence over dynamically enabled debugging; otherwise adding DEBUG (like, for example, via CONFIG_DEBUG_KOBJECT) does not have the expected result of printing pr_debug() and dev_dbg() messages unconditionally. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2008-12-04 16:55:47 +01:00

dynamic debug: combine dprintk and dynamic printk This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-02-05 11:51:38 -05:00

Dynamic debug: fix pr_fmt() build error When CONFIG_DYNAMIC_DEBUG is enabled, allow callers of pr_debug() to provide their own definition of pr_fmt() even if that definition uses tricks like #define pr_fmt(fmt) "%s:" fmt, __func__ Signed-off-by: Greg Banks <gnb@sgi.com> Cc: Jason Baron <jbaron@redhat.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-03-11 21:07:28 +11:00

driver core: basic infrastructure for per-module dynamic debug messages Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2008-08-12 16:46:19 -04:00

Dynamic debug: fix pr_fmt() build error When CONFIG_DYNAMIC_DEBUG is enabled, allow callers of pr_debug() to provide their own definition of pr_fmt() even if that definition uses tricks like #define pr_fmt(fmt) "%s:" fmt, __func__ Signed-off-by: Greg Banks <gnb@sgi.com> Cc: Jason Baron <jbaron@redhat.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-03-11 21:07:28 +11:00

driver core: basic infrastructure for per-module dynamic debug messages Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2008-08-12 16:46:19 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

Add 'pr_fmt()' format modifier to pr_xyz macros. A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2008-11-12 21:16:43 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing: add tracing_on/tracing_off to kernel.h Impact: cleanup The functions tracing_start/tracing_stop have been moved to kernel.h. These are not the functions a developer most likely wants to use when they want to insert a place to stop tracing and restart it from user space. tracing_start/tracing_stop was created to work with things like suspend to ram, where even calling smp_processor_id() can crash the system. The tracing_start/tracing_stop was used to stop the tracer from doing anything. These are still light weight functions, but add a bit more overhead to be able to stop the tracers. They also have no interface back to userland. That is, if the kernel calls tracing_stop, userland can not start tracing. What a developer most likely wants to use is tracing_on/tracing_off. These are very light weight functions (simply sets or clears a bit). These functions just stop recording into the ring buffer. The tracers don't even know that this happens except that they would receive NULL from the ring_buffer_lock_reserve function. Also, there's a way for the user land to enable or disable this bit. In debugfs/tracing/tracing_on, a user may echo "0" (same as tracing_off()) or echo "1" (same as tracing_on()) into this file. This becomes handy when a kernel developer is debugging and wants tracing to turn off when it hits an anomaly. Then the developer can examine the trace, and restart tracing if they want to try again (echo 1 > tracing_on). This patch moves the prototypes for tracing_on/tracing_off to kernel.h and comments their use, so that a kernel developer will know how to use them. Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-05 10:35:56 -05:00

debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem. Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/" directory name to mount debugfs filesystem for ftrace according to ./Documentation/tracers/ftrace.txt file. And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is existed in kernel source like ftrace, DRM, Wireless, Documentation, Network[sky2]files to mount debugfs filesystem. debugfs means debug filesystem for debugging easy to use by greg kroah hartman. "/sys/kernel/debug/" name is suitable as directory name of debugfs filesystem. - debugfs related reference: http://lwn.net/Articles/334546/ Fix inconsistency of directory name to mount debugfs filesystem. * From Steven Rostedt - find_debugfs() and tracing_files() in this patch. Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com> Acked-by : Inaky Perez-Gonzalez <inaky@linux.intel.com> Reviewed-by : Steven Rostedt <rostedt@goodmis.org> Reviewed-by : James Smart <james.smart@emulex.com> CC: Jiri Kosina <trivial@kernel.org> CC: David Airlie <airlied@linux.ie> CC: Peter Osterlund <petero2@telia.com> CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com> CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> CC: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2009-06-02 15:01:37 +09:00

tracing: add tracing_on/tracing_off to kernel.h Impact: cleanup The functions tracing_start/tracing_stop have been moved to kernel.h. These are not the functions a developer most likely wants to use when they want to insert a place to stop tracing and restart it from user space. tracing_start/tracing_stop was created to work with things like suspend to ram, where even calling smp_processor_id() can crash the system. The tracing_start/tracing_stop was used to stop the tracer from doing anything. These are still light weight functions, but add a bit more overhead to be able to stop the tracers. They also have no interface back to userland. That is, if the kernel calls tracing_stop, userland can not start tracing. What a developer most likely wants to use is tracing_on/tracing_off. These are very light weight functions (simply sets or clears a bit). These functions just stop recording into the ring buffer. The tracers don't even know that this happens except that they would receive NULL from the ring_buffer_lock_reserve function. Also, there's a way for the user land to enable or disable this bit. In debugfs/tracing/tracing_on, a user may echo "0" (same as tracing_off()) or echo "1" (same as tracing_on()) into this file. This becomes handy when a kernel developer is debugging and wants tracing to turn off when it hits an anomaly. Then the developer can examine the trace, and restart tracing if they want to try again (echo 1 > tracing_on). This patch moves the prototypes for tracing_on/tracing_off to kernel.h and comments their use, so that a kernel developer will know how to use them. Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-05 10:35:56 -05:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing: add tracing_on/tracing_off to kernel.h Impact: cleanup The functions tracing_start/tracing_stop have been moved to kernel.h. These are not the functions a developer most likely wants to use when they want to insert a place to stop tracing and restart it from user space. tracing_start/tracing_stop was created to work with things like suspend to ram, where even calling smp_processor_id() can crash the system. The tracing_start/tracing_stop was used to stop the tracer from doing anything. These are still light weight functions, but add a bit more overhead to be able to stop the tracers. They also have no interface back to userland. That is, if the kernel calls tracing_stop, userland can not start tracing. What a developer most likely wants to use is tracing_on/tracing_off. These are very light weight functions (simply sets or clears a bit). These functions just stop recording into the ring buffer. The tracers don't even know that this happens except that they would receive NULL from the ring_buffer_lock_reserve function. Also, there's a way for the user land to enable or disable this bit. In debugfs/tracing/tracing_on, a user may echo "0" (same as tracing_off()) or echo "1" (same as tracing_on()) into this file. This becomes handy when a kernel developer is debugging and wants tracing to turn off when it hits an anomaly. Then the developer can examine the trace, and restart tracing if they want to try again (echo 1 > tracing_on). This patch moves the prototypes for tracing_on/tracing_off to kernel.h and comments their use, so that a kernel developer will know how to use them. Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-05 10:35:56 -05:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing: optimize trace_printk() Impact: micro-optimization trace_printk() does this unconditionally: trace_printk_fmt = fmt; Where trace_printk_fmt is an entry into a global array. This is very SMP-unfriendly. So only write it once per bootup. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-09 10:11:36 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing/core: bring back raw trace_printk for dynamic formats strings Impact: fix callsites with dynamic format strings Since its new binary implementation, trace_printk() internally uses static containers for the format strings on each callsites. But the value is assigned once at build time, which means that it can't take dynamic formats. So this patch unearthes the raw trace_printk implementation for the callers that will need trace_printk to be able to carry these dynamic format strings. The trace_printk() macro will use the appropriate implementation for each callsite. Most of the time however, the binary implementation will still be used. The other impact of this patch is that mmiotrace_printk() will use the old implementation because it calls the low level trace_vprintk and we can't guess here whether the format passed in it is dynamic or not. Some parts of this patch have been written by Steven Rostedt (most notably the part that chooses the appropriate implementation for each callsites). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>

2009-03-12 18:24:49 +01:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

tracing/core: drop the old trace_printk() implementation in favour of trace_bprintk() Impact: faster and lighter tracing Now that we have trace_bprintk() which is faster and consume lesser memory than trace_printk() and has the same purpose, we can now drop the old implementation in favour of the binary one from trace_bprintk(), which means we move all the implementation of trace_bprintk() to trace_printk(), so the Api doesn't change except that we must now use trace_seq_bprintk() to print the TRACE_PRINT entries. Some changes result of this: - Previously, trace_bprintk depended of a single tracer and couldn't work without. This tracer has been dropped and the whole implementation of trace_printk() (like the module formats management) is now integrated in the tracing core (comes with CONFIG_TRACING), though we keep the file trace_printk (previously trace_bprintk.c) where we can find the module management. Thus we don't overflow trace.c - changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries. - change a bit trace_printk/trace_vprintk macros to support non-builtin formats constants, and fix 'const' qualifiers warnings. But this is all transparent for developers. - etc... V2: - Rebase against last changes - Fix mispell on the changelog V3: - Rebase against last changes (moving trace_printk() to kernel.h) Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-06 17:21:49 +01:00

tracing: move utility functions from ftrace.h to kernel.h Make common utility functions such as trace_printk() and tracing_start()/tracing_stop() generally available to kernel code. Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2009-03-05 10:28:45 +01:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[NET]: Use NIP6_FMT in kernel.h There are errors and inconsistency in the display of NIP6 strings. ie: net/ipv6/ip6_flowlabel.c There are errors and inconsistency in the display of NIPQUAD strings too. ie: net/netfilter/nf_conntrack_ftp.c This patch: adds NIP6_FMT to kernel.h changes all code to use NIP6_FMT fixes net/ipv6/ip6_flowlabel.c adds NIPQUAD_FMT to kernel.h fixes net/netfilter/nf_conntrack_ftp.c changes a few uses of "%u.%u.%u.%u" to NIPQUAD_FMT for symmetry to NIP6_FMT Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2006-01-13 14:29:07 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-04-30 00:54:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-04-30 00:54:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-04-30 00:54:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-04-30 00:54:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

2008-04-30 00:54:55 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

generic swap(): introduce global macro swap(a, b) There have been some local definitions of swap(), it's time to replace them all with a uniform one. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-07 18:09:12 -08:00

generic swap(): don't return a value from swap() The swap() macro is accidentally retuning the value of its first argument. Change it into a doesn't-return-anything macro before someone goes and relies upon this behaviour. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-02-04 15:11:59 -08:00

generic swap(): introduce global macro swap(a, b) There have been some local definitions of swap(), it's time to replace them all with a uniform one. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-01-07 18:09:12 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

include/linux: trivial repair whitespace damage Adding tabs where spaces currently are. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-05-12 16:28:35 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Common compat_sys_sysinfo I noticed that almost all architectures implemented exactly the same sys32_sysinfo... except parisc, where a bug was to be found in handling of the uptime. So let's remove a whole whack of code for fun and profit. Cribbed compat_sys_sysinfo from x86_64's implementation, since I figured it would be the best tested. This patch incorporates Arnd's suggestion of not using set_fs/get_fs, but instead extracting out the common code from sys_sysinfo. Cc: Christoph Hellwig <hch@infradead.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2007-02-10 01:46:00 -08:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] include/linux/kernel.h:BUILD_BUG_ON(): fix a comment Fix comment describing BUILD_BUG_ON: BUG_ON is not an assertion (unfortunately). Signed-off-by: Nikita Danilov <nikita@clusterfs.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-10-30 15:03:10 -08:00

BUILD_BUG_ON(): fix it and a couple of bogus uses of it gcc permitting variable length arrays makes the current construct used for BUILD_BUG_ON() useless, as that doesn't produce any diagnostic if the controlling expression isn't really constant. Instead, this patch makes it so that a bit field gets used here. Consequently, those uses where the condition isn't really constant now also need fixing. Note that in the gfp.h, kmemcheck.h, and virtio_config.h cases MAYBE_BUILD_BUG_ON() really just serves documentation purposes - even if the expression is compile time constant (__builtin_constant_p() yields true), the array is still deemed of variable length by gcc, and hence the whole expression doesn't have the intended effect. [akpm@linux-foundation.org: make arch/sparc/include/asm/vio.h compile] [akpm@linux-foundation.org: more nonsensical assertions in tpm.c..] Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:43:52 -07:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] x86_64: reliable stack trace support These are the generic bits needed to enable reliable stack traces based on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will enable x86-64 and i386 to make use of this. Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities for improvement. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-26 13:57:28 +02:00

BUILD_BUG_ON(): fix it and a couple of bogus uses of it gcc permitting variable length arrays makes the current construct used for BUILD_BUG_ON() useless, as that doesn't produce any diagnostic if the controlling expression isn't really constant. Instead, this patch makes it so that a bit field gets used here. Consequently, those uses where the condition isn't really constant now also need fixing. Note that in the gfp.h, kmemcheck.h, and virtio_config.h cases MAYBE_BUILD_BUG_ON() really just serves documentation purposes - even if the expression is compile time constant (__builtin_constant_p() yields true), the array is still deemed of variable length by gcc, and hence the whole expression doesn't have the intended effect. [akpm@linux-foundation.org: make arch/sparc/include/asm/vio.h compile] [akpm@linux-foundation.org: more nonsensical assertions in tpm.c..] Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2009-09-22 16:43:52 -07:00

[PATCH] x86_64: reliable stack trace support These are the generic bits needed to enable reliable stack traces based on Dwarf2-like (.eh_frame) unwind information. Subsequent patches will enable x86-64 and i386 to make use of this. Thanks to Andi Kleen and Ingo Molnar, who pointed out several possibilities for improvement. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-06-26 13:57:28 +02:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

[PATCH] Add NUMA_BUILD definition in kernel.h to avoid #ifdef CONFIG_NUMA The NUMA_BUILD constant is always available and will be set to 1 on NUMA_BUILDs. That way checks valid only under CONFIG_NUMA can easily be done without #ifdef CONFIG_NUMA F.e. if (NUMA_BUILD && <numa_condition>) { ... } [akpm: not a thing we'd normally do, but CONFIG_NUMA is special: it is causing ifdef explosion in core kernel, so let's see if this is a comfortable way in whcih to control that] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2006-09-27 01:50:06 -07:00

ftrace: rebuild everything on change to FTRACE_MCOUNT_RECORD When enabling or disabling CONFIG_FTRACE_MCOUNT_RECORD, we want a full kernel compile to handle the adding of the __mcount_loc sections. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>

2008-08-14 15:45:10 -04:00

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

2005-04-16 15:20:36 -07:00

708 lines 22 KiB Raw Normal View History

708 lines

22 KiB

Raw Normal View History