License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
|
|
|
|
2019-08-28 16:19:53 +02:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
2007-02-12 00:51:39 -08:00
|
|
|
|
mm: introduce leaf entry type and use to simplify leaf entry logic
The kernel maintains leaf page table entries which contain either:
The kernel maintains leaf page table entries which contain either:
- Nothing ('none' entries)
- Present entries*
- Everything else that will cause a fault which the kernel handles
* Present entries are either entries the hardware can navigate without page
fault or special cases like NUMA hint protnone or PMD with cleared
present bit which contain hardware-valid entries modulo the present bit.
In the 'everything else' group we include swap entries, but we also
include a number of other things such as migration entries, device private
entries and marker entries.
Unfortunately this 'everything else' group expresses everything through a
swp_entry_t type, and these entries are referred to swap entries even
though they may well not contain a... swap entry.
This is compounded by the rather mind-boggling concept of a non-swap swap
entry (checked via non_swap_entry()) and the means by which we twist and
turn to satisfy this.
This patch lays the foundation for reducing this confusion.
We refer to 'everything else' as a 'software-define leaf entry' or
'softleaf'. for short And in fact we scoop up the 'none' entries into
this concept also so we are left with:
- Present entries.
- Softleaf entries (which may be empty).
This allows for radical simplification across the board - one can simply
convert any leaf page table entry to a leaf entry via softleaf_from_pte().
If the entry is present, we return an empty leaf entry, so it is assumed
the caller is aware that they must differentiate between the two
categories of page table entries, checking for the former via
pte_present().
As a result, we can eliminate a number of places where we would otherwise
need to use predicates to see if we can proceed with leaf page table entry
conversion and instead just go ahead and do it unconditionally.
We do so where we can, adjusting surrounding logic as necessary to
integrate the new softleaf_t logic as far as seems reasonable at this
stage.
We typedef swp_entry_t to softleaf_t for the time being until the
conversion can be complete, meaning everything remains compatible
regardless of which type is used. We will eventually remove swp_entry_t
when the conversion is complete.
We introduce a new header file to keep things clear - leafops.h - this
imports swapops.h so can direct replace swapops imports without issue, and
we do so in all the files that require it.
Additionally, add new leafops.h file to core mm maintainers entry.
Link: https://lkml.kernel.org/r/c879383aac77d96a03e4d38f7daba893cd35fc76.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:20 +00:00
|
|
|
|
2017-02-24 14:59:36 -08:00
|
|
|
|
2009-12-14 17:59:58 -08:00
|
|
|
|
2020-06-08 21:32:42 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2016-12-24 11:46:01 -08:00
|
|
|
|
2022-05-09 18:20:47 -07:00
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
2025-07-24 17:09:58 +08:00
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
2025-07-24 17:09:58 +08:00
|
|
|
|
mm: correctly handle UFFD PTE markers
Patch series "mm: remove is_swap_[pte, pmd]() + non-swap entries,
introduce leaf entries", v3.
There's an established convention in the kernel that we treat leaf page
tables (so far at the PTE, PMD level) as containing 'swap entries' should
they be neither empty (i.e. p**_none() evaluating true) nor present (i.e.
p**_present() evaluating true).
However, at the same time we also have helper predicates - is_swap_pte(),
is_swap_pmd() - which are inconsistently used.
This is problematic, as it is logical to assume that should somebody wish
to operate upon a page table swap entry they should first check to see if
it is in fact one.
It also implies that perhaps, in future, we might introduce a non-present,
none page table entry that is not a swap entry.
This series resolves this issue by systematically eliminating all use of
the is_swap_pte() and is swap_pmd() predicates so we retain only the
convention that should a leaf page table entry be neither none nor present
it is a swap entry.
We also have the further issue that 'swap entry' is unfortunately a really
rather overloaded term and in fact refers to both entries for swap and for
other information such as migration entries, page table markers, and
device private entries.
We therefore have the rather 'unique' concept of a 'non-swap' swap entry.
This series therefore introduces the concept of 'software leaf entries',
of type softleaf_t, to eliminate this confusion.
A software leaf entry in this sense is any page table entry which is
non-present, and represented by the softleaf_t type. That is - page table
leaf entries which are software-controlled by the kernel.
This includes 'none' or empty entries, which are simply represented by an
zero leaf entry value.
In order to maintain compatibility as we transition the kernel to this new
type, we simply typedef swp_entry_t to softleaf_t.
We introduce a number of predicates and helpers to interact with software
leaf entries in include/linux/leafops.h which, as it imports swapops.h,
can be treated as a drop-in replacement for swapops.h wherever leaf entry
helpers are used.
Since softleaf_from_[pte, pmd]() treats present entries as they were
empty/none leaf entries, this allows for a great deal of simplification of
code throughout the code base, which this series utilises a great deal.
We additionally change from swap entry to software leaf entry handling
where it makes sense to and eliminate functions from swapops.h where
software leaf entries obviate the need for the functions.
This patch (of 16):
PTE markers were previously only concerned with UFFD-specific logic - that
is, PTE entries with the UFFD WP marker set or those marked via
UFFDIO_POISON.
However since the introduction of guard markers in commit 7c53dfbdb024
("mm: add PTE_MARKER_GUARD PTE marker"), this has no longer been the case.
Issues have been avoided as guard regions are not permitted in conjunction
with UFFD, but it still leaves very confusing logic in place, most notably
the misleading and poorly named pte_none_mostly() and
huge_pte_none_mostly().
This predicate returns true for PTE entries that ought to be treated as
none, but only in certain circumstances, and on the assumption we are
dealing with H/W poison markers or UFFD WP markers.
This patch removes these functions and makes each invocation of these
functions instead explicitly check what it needs to check.
As part of this effort it introduces is_uffd_pte_marker() to explicitly
determine if a marker in fact is used as part of UFFD or not.
In the HMM logic we note that the only time we would need to check for a
fault is in the case of a UFFD WP marker, otherwise we simply encounter a
fault error (VM_FAULT_HWPOISON for H/W poisoned marker, VM_FAULT_SIGSEGV
for a guard marker), so only check for the UFFD WP case.
While we're here we also refactor code to make it easier to understand.
[akpm@linux-foundation.org: fix comment typo, per Mike]
Link: https://lkml.kernel.org/r/cover.1762812360.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/c38625fd9a1c1f1cf64ae8a248858e45b3dcdf11.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:19 +00:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: correctly handle UFFD PTE markers
Patch series "mm: remove is_swap_[pte, pmd]() + non-swap entries,
introduce leaf entries", v3.
There's an established convention in the kernel that we treat leaf page
tables (so far at the PTE, PMD level) as containing 'swap entries' should
they be neither empty (i.e. p**_none() evaluating true) nor present (i.e.
p**_present() evaluating true).
However, at the same time we also have helper predicates - is_swap_pte(),
is_swap_pmd() - which are inconsistently used.
This is problematic, as it is logical to assume that should somebody wish
to operate upon a page table swap entry they should first check to see if
it is in fact one.
It also implies that perhaps, in future, we might introduce a non-present,
none page table entry that is not a swap entry.
This series resolves this issue by systematically eliminating all use of
the is_swap_pte() and is swap_pmd() predicates so we retain only the
convention that should a leaf page table entry be neither none nor present
it is a swap entry.
We also have the further issue that 'swap entry' is unfortunately a really
rather overloaded term and in fact refers to both entries for swap and for
other information such as migration entries, page table markers, and
device private entries.
We therefore have the rather 'unique' concept of a 'non-swap' swap entry.
This series therefore introduces the concept of 'software leaf entries',
of type softleaf_t, to eliminate this confusion.
A software leaf entry in this sense is any page table entry which is
non-present, and represented by the softleaf_t type. That is - page table
leaf entries which are software-controlled by the kernel.
This includes 'none' or empty entries, which are simply represented by an
zero leaf entry value.
In order to maintain compatibility as we transition the kernel to this new
type, we simply typedef swp_entry_t to softleaf_t.
We introduce a number of predicates and helpers to interact with software
leaf entries in include/linux/leafops.h which, as it imports swapops.h,
can be treated as a drop-in replacement for swapops.h wherever leaf entry
helpers are used.
Since softleaf_from_[pte, pmd]() treats present entries as they were
empty/none leaf entries, this allows for a great deal of simplification of
code throughout the code base, which this series utilises a great deal.
We additionally change from swap entry to software leaf entry handling
where it makes sense to and eliminate functions from swapops.h where
software leaf entries obviate the need for the functions.
This patch (of 16):
PTE markers were previously only concerned with UFFD-specific logic - that
is, PTE entries with the UFFD WP marker set or those marked via
UFFDIO_POISON.
However since the introduction of guard markers in commit 7c53dfbdb024
("mm: add PTE_MARKER_GUARD PTE marker"), this has no longer been the case.
Issues have been avoided as guard regions are not permitted in conjunction
with UFFD, but it still leaves very confusing logic in place, most notably
the misleading and poorly named pte_none_mostly() and
huge_pte_none_mostly().
This predicate returns true for PTE entries that ought to be treated as
none, but only in certain circumstances, and on the assumption we are
dealing with H/W poison markers or UFFD WP markers.
This patch removes these functions and makes each invocation of these
functions instead explicitly check what it needs to check.
As part of this effort it introduces is_uffd_pte_marker() to explicitly
determine if a marker in fact is used as part of UFFD or not.
In the HMM logic we note that the only time we would need to check for a
fault is in the case of a UFFD WP marker, otherwise we simply encounter a
fault error (VM_FAULT_HWPOISON for H/W poisoned marker, VM_FAULT_SIGSEGV
for a guard marker), so only check for the UFFD WP case.
While we're here we also refactor code to make it easier to understand.
[akpm@linux-foundation.org: fix comment typo, per Mike]
Link: https://lkml.kernel.org/r/cover.1762812360.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/c38625fd9a1c1f1cf64ae8a248858e45b3dcdf11.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:19 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm: introduce leaf entry type and use to simplify leaf entry logic
The kernel maintains leaf page table entries which contain either:
The kernel maintains leaf page table entries which contain either:
- Nothing ('none' entries)
- Present entries*
- Everything else that will cause a fault which the kernel handles
* Present entries are either entries the hardware can navigate without page
fault or special cases like NUMA hint protnone or PMD with cleared
present bit which contain hardware-valid entries modulo the present bit.
In the 'everything else' group we include swap entries, but we also
include a number of other things such as migration entries, device private
entries and marker entries.
Unfortunately this 'everything else' group expresses everything through a
swp_entry_t type, and these entries are referred to swap entries even
though they may well not contain a... swap entry.
This is compounded by the rather mind-boggling concept of a non-swap swap
entry (checked via non_swap_entry()) and the means by which we twist and
turn to satisfy this.
This patch lays the foundation for reducing this confusion.
We refer to 'everything else' as a 'software-define leaf entry' or
'softleaf'. for short And in fact we scoop up the 'none' entries into
this concept also so we are left with:
- Present entries.
- Softleaf entries (which may be empty).
This allows for radical simplification across the board - one can simply
convert any leaf page table entry to a leaf entry via softleaf_from_pte().
If the entry is present, we return an empty leaf entry, so it is assumed
the caller is aware that they must differentiate between the two
categories of page table entries, checking for the former via
pte_present().
As a result, we can eliminate a number of places where we would otherwise
need to use predicates to see if we can proceed with leaf page table entry
conversion and instead just go ahead and do it unconditionally.
We do so where we can, adjusting surrounding logic as necessary to
integrate the new softleaf_t logic as far as seems reasonable at this
stage.
We typedef swp_entry_t to softleaf_t for the time being until the
conversion can be complete, meaning everything remains compatible
regardless of which type is used. We will eventually remove swp_entry_t
when the conversion is complete.
We introduce a new header file to keep things clear - leafops.h - this
imports swapops.h so can direct replace swapops imports without issue, and
we do so in all the files that require it.
Additionally, add new leafops.h file to core mm maintainers entry.
Link: https://lkml.kernel.org/r/c879383aac77d96a03e4d38f7daba893cd35fc76.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:20 +00:00
|
|
|
|
mm: correctly handle UFFD PTE markers
Patch series "mm: remove is_swap_[pte, pmd]() + non-swap entries,
introduce leaf entries", v3.
There's an established convention in the kernel that we treat leaf page
tables (so far at the PTE, PMD level) as containing 'swap entries' should
they be neither empty (i.e. p**_none() evaluating true) nor present (i.e.
p**_present() evaluating true).
However, at the same time we also have helper predicates - is_swap_pte(),
is_swap_pmd() - which are inconsistently used.
This is problematic, as it is logical to assume that should somebody wish
to operate upon a page table swap entry they should first check to see if
it is in fact one.
It also implies that perhaps, in future, we might introduce a non-present,
none page table entry that is not a swap entry.
This series resolves this issue by systematically eliminating all use of
the is_swap_pte() and is swap_pmd() predicates so we retain only the
convention that should a leaf page table entry be neither none nor present
it is a swap entry.
We also have the further issue that 'swap entry' is unfortunately a really
rather overloaded term and in fact refers to both entries for swap and for
other information such as migration entries, page table markers, and
device private entries.
We therefore have the rather 'unique' concept of a 'non-swap' swap entry.
This series therefore introduces the concept of 'software leaf entries',
of type softleaf_t, to eliminate this confusion.
A software leaf entry in this sense is any page table entry which is
non-present, and represented by the softleaf_t type. That is - page table
leaf entries which are software-controlled by the kernel.
This includes 'none' or empty entries, which are simply represented by an
zero leaf entry value.
In order to maintain compatibility as we transition the kernel to this new
type, we simply typedef swp_entry_t to softleaf_t.
We introduce a number of predicates and helpers to interact with software
leaf entries in include/linux/leafops.h which, as it imports swapops.h,
can be treated as a drop-in replacement for swapops.h wherever leaf entry
helpers are used.
Since softleaf_from_[pte, pmd]() treats present entries as they were
empty/none leaf entries, this allows for a great deal of simplification of
code throughout the code base, which this series utilises a great deal.
We additionally change from swap entry to software leaf entry handling
where it makes sense to and eliminate functions from swapops.h where
software leaf entries obviate the need for the functions.
This patch (of 16):
PTE markers were previously only concerned with UFFD-specific logic - that
is, PTE entries with the UFFD WP marker set or those marked via
UFFDIO_POISON.
However since the introduction of guard markers in commit 7c53dfbdb024
("mm: add PTE_MARKER_GUARD PTE marker"), this has no longer been the case.
Issues have been avoided as guard regions are not permitted in conjunction
with UFFD, but it still leaves very confusing logic in place, most notably
the misleading and poorly named pte_none_mostly() and
huge_pte_none_mostly().
This predicate returns true for PTE entries that ought to be treated as
none, but only in certain circumstances, and on the assumption we are
dealing with H/W poison markers or UFFD WP markers.
This patch removes these functions and makes each invocation of these
functions instead explicitly check what it needs to check.
As part of this effort it introduces is_uffd_pte_marker() to explicitly
determine if a marker in fact is used as part of UFFD or not.
In the HMM logic we note that the only time we would need to check for a
fault is in the case of a UFFD WP marker, otherwise we simply encounter a
fault error (VM_FAULT_HWPOISON for H/W poisoned marker, VM_FAULT_SIGSEGV
for a guard marker), so only check for the UFFD WP case.
While we're here we also refactor code to make it easier to understand.
[akpm@linux-foundation.org: fix comment typo, per Mike]
Link: https://lkml.kernel.org/r/cover.1762812360.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/c38625fd9a1c1f1cf64ae8a248858e45b3dcdf11.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:19 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-24 17:09:58 +08:00
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
|
|
|
|
|
2025-08-12 01:20:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-11-10 22:21:31 +00:00
|
|
|
|
2025-08-12 01:20:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mm, swap: use unified helper for swap cache look up
The swap cache lookup helper swap_cache_get_folio currently does readahead
updates as well, so callers that are not doing swapin from any VMA or
mapping are forced to reuse filemap helpers instead, and have to access
the swap cache space directly.
So decouple readahead update with swap cache lookup. Move the readahead
update part into a standalone helper. Let the caller call the readahead
update helper if they do readahead. And convert all swap cache lookups to
use swap_cache_get_folio.
After this commit, there are only three special cases for accessing swap
cache space now: huge memory splitting, migration, and shmem replacing,
because they need to lock the XArray. The following commits will wrap
their accesses to the swap cache too, with special helpers.
And worth noting, currently dropbehind is not supported for anon folio,
and we will never see a dropbehind folio in swap cache. The unified
helper can be updated later to handle that.
While at it, add proper kernedoc for touched helpers.
No functional change.
Link: https://lkml.kernel.org/r/20250916160100.31545-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Chris Li <chrisl@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-09-17 00:00:47 +08:00
|
|
|
|
2025-08-12 01:20:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-10-13 16:51:17 -07:00
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
2022-10-19 19:33:31 +01:00
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-12 01:20:18 +08:00
|
|
|
|
|
|
|
|
|
2025-08-12 01:20:17 +08:00
|
|
|
|
2025-08-12 01:20:18 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-08-12 01:20:17 +08:00
|
|
|
|
|
|
|
|
|
2022-10-19 19:33:31 +01:00
|
|
|
|
|
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2020-02-03 17:36:03 -08:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2016-01-21 16:40:25 -08:00
|
|
|
|
|
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 18:17:26 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
mm: ptep_get() conversion
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 16:15:45 +01:00
|
|
|
|
2007-02-12 00:51:39 -08:00
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
mm: correctly handle UFFD PTE markers
Patch series "mm: remove is_swap_[pte, pmd]() + non-swap entries,
introduce leaf entries", v3.
There's an established convention in the kernel that we treat leaf page
tables (so far at the PTE, PMD level) as containing 'swap entries' should
they be neither empty (i.e. p**_none() evaluating true) nor present (i.e.
p**_present() evaluating true).
However, at the same time we also have helper predicates - is_swap_pte(),
is_swap_pmd() - which are inconsistently used.
This is problematic, as it is logical to assume that should somebody wish
to operate upon a page table swap entry they should first check to see if
it is in fact one.
It also implies that perhaps, in future, we might introduce a non-present,
none page table entry that is not a swap entry.
This series resolves this issue by systematically eliminating all use of
the is_swap_pte() and is swap_pmd() predicates so we retain only the
convention that should a leaf page table entry be neither none nor present
it is a swap entry.
We also have the further issue that 'swap entry' is unfortunately a really
rather overloaded term and in fact refers to both entries for swap and for
other information such as migration entries, page table markers, and
device private entries.
We therefore have the rather 'unique' concept of a 'non-swap' swap entry.
This series therefore introduces the concept of 'software leaf entries',
of type softleaf_t, to eliminate this confusion.
A software leaf entry in this sense is any page table entry which is
non-present, and represented by the softleaf_t type. That is - page table
leaf entries which are software-controlled by the kernel.
This includes 'none' or empty entries, which are simply represented by an
zero leaf entry value.
In order to maintain compatibility as we transition the kernel to this new
type, we simply typedef swp_entry_t to softleaf_t.
We introduce a number of predicates and helpers to interact with software
leaf entries in include/linux/leafops.h which, as it imports swapops.h,
can be treated as a drop-in replacement for swapops.h wherever leaf entry
helpers are used.
Since softleaf_from_[pte, pmd]() treats present entries as they were
empty/none leaf entries, this allows for a great deal of simplification of
code throughout the code base, which this series utilises a great deal.
We additionally change from swap entry to software leaf entry handling
where it makes sense to and eliminate functions from swapops.h where
software leaf entries obviate the need for the functions.
This patch (of 16):
PTE markers were previously only concerned with UFFD-specific logic - that
is, PTE entries with the UFFD WP marker set or those marked via
UFFDIO_POISON.
However since the introduction of guard markers in commit 7c53dfbdb024
("mm: add PTE_MARKER_GUARD PTE marker"), this has no longer been the case.
Issues have been avoided as guard regions are not permitted in conjunction
with UFFD, but it still leaves very confusing logic in place, most notably
the misleading and poorly named pte_none_mostly() and
huge_pte_none_mostly().
This predicate returns true for PTE entries that ought to be treated as
none, but only in certain circumstances, and on the assumption we are
dealing with H/W poison markers or UFFD WP markers.
This patch removes these functions and makes each invocation of these
functions instead explicitly check what it needs to check.
As part of this effort it introduces is_uffd_pte_marker() to explicitly
determine if a marker in fact is used as part of UFFD or not.
In the HMM logic we note that the only time we would need to check for a
fault is in the case of a UFFD WP marker, otherwise we simply encounter a
fault error (VM_FAULT_HWPOISON for H/W poisoned marker, VM_FAULT_SIGSEGV
for a guard marker), so only check for the UFFD WP case.
While we're here we also refactor code to make it easier to understand.
[akpm@linux-foundation.org: fix comment typo, per Mike]
Link: https://lkml.kernel.org/r/cover.1762812360.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/c38625fd9a1c1f1cf64ae8a248858e45b3dcdf11.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:19 +00:00
|
|
|
|
mm: introduce leaf entry type and use to simplify leaf entry logic
The kernel maintains leaf page table entries which contain either:
The kernel maintains leaf page table entries which contain either:
- Nothing ('none' entries)
- Present entries*
- Everything else that will cause a fault which the kernel handles
* Present entries are either entries the hardware can navigate without page
fault or special cases like NUMA hint protnone or PMD with cleared
present bit which contain hardware-valid entries modulo the present bit.
In the 'everything else' group we include swap entries, but we also
include a number of other things such as migration entries, device private
entries and marker entries.
Unfortunately this 'everything else' group expresses everything through a
swp_entry_t type, and these entries are referred to swap entries even
though they may well not contain a... swap entry.
This is compounded by the rather mind-boggling concept of a non-swap swap
entry (checked via non_swap_entry()) and the means by which we twist and
turn to satisfy this.
This patch lays the foundation for reducing this confusion.
We refer to 'everything else' as a 'software-define leaf entry' or
'softleaf'. for short And in fact we scoop up the 'none' entries into
this concept also so we are left with:
- Present entries.
- Softleaf entries (which may be empty).
This allows for radical simplification across the board - one can simply
convert any leaf page table entry to a leaf entry via softleaf_from_pte().
If the entry is present, we return an empty leaf entry, so it is assumed
the caller is aware that they must differentiate between the two
categories of page table entries, checking for the former via
pte_present().
As a result, we can eliminate a number of places where we would otherwise
need to use predicates to see if we can proceed with leaf page table entry
conversion and instead just go ahead and do it unconditionally.
We do so where we can, adjusting surrounding logic as necessary to
integrate the new softleaf_t logic as far as seems reasonable at this
stage.
We typedef swp_entry_t to softleaf_t for the time being until the
conversion can be complete, meaning everything remains compatible
regardless of which type is used. We will eventually remove swp_entry_t
when the conversion is complete.
We introduce a new header file to keep things clear - leafops.h - this
imports swapops.h so can direct replace swapops imports without issue, and
we do so in all the files that require it.
Additionally, add new leafops.h file to core mm maintainers entry.
Link: https://lkml.kernel.org/r/c879383aac77d96a03e4d38f7daba893cd35fc76.1762812360.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-11-10 22:21:20 +00:00
|
|
|
|
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"
This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.
It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.
There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:
"For Netflix, losing accurate information from the mincore syscall
would lengthen database cluster maintenance operations from days to
months. We rely on cross-process mincore to migrate the contents of a
page cache from machine to machine, and across reboots.
To do this, I wrote and maintain happycache [1], a page cache
dumper/loader tool. It is quite similar in architecture to pgfincore,
except that it is agnostic to workload. The gist of happycache's
operation is "produce a dump of residence status for each page, do
some operation, then reload exactly the same pages which were present
before." happycache is entirely dependent on accurate reporting of the
in-core status of file-backed pages, as accessed by another process.
We primarily use happycache with Cassandra, which (like Postgres +
pgfincore) relies heavily on OS page cache to reduce disk accesses.
Because our workloads never experience a cold page cache, we are able
to provision hardware for a peak utilization level that is far lower
than the hypothetical "every query is a cache miss" peak.
A database warmed by happycache can be ready for service in seconds
(bounded only by the performance of the drives and the I/O subsystem),
with no period of in-service degradation. By contrast, putting a
database in service without a page cache entails a potentially
unbounded period of degradation (at Netflix, the time to populate a
single node's cache via natural cache misses varies by workload from
hours to weeks). If a single node upgrade were to take weeks, then
upgrading an entire cluster would take months. Since we want to apply
security upgrades (and other things) on a somewhat tighter schedule,
we would have to develop more complex solutions to provide the same
functionality already provided by mincore.
At the bottom line, happycache is designed to benignly exploit the
same information leak documented in the paper [2]. I think it makes
perfect sense to remove cross-process mincore functionality from
unprivileged users, but not to remove it entirely"
We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way. It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.
So revert the optimistic first approach to make room for that alternate
fix instead.
Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-24 09:04:37 +13:00
|
|
|
|
|
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-11-10 22:21:34 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2007-02-12 00:51:39 -08:00
|
|
|
|
2025-05-09 08:45:21 +08:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2010-05-24 14:32:09 -07:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:11 -07:00
|
|
|
|
|
|
|
|
|
2019-05-14 15:41:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-01-13 12:49:26 +01:00
|
|
|
|
2021-01-21 14:19:25 +01:00
|
|
|
|
2021-01-21 14:19:22 +01:00
|
|
|
|
2019-05-14 15:41:38 -07:00
|
|
|
|
|
|
|
|
|
2019-08-28 16:19:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-08-04 08:27:19 -07:00
|
|
|
|
2019-08-28 16:19:54 +02:00
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:11 -07:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
2022-10-06 23:03:45 -04:00
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:10 -07:00
|
|
|
|
2010-05-24 14:32:11 -07:00
|
|
|
|
2019-05-14 15:41:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-28 16:19:54 +02:00
|
|
|
|
2015-02-11 15:28:11 -08:00
|
|
|
|
|
|
|
|
|
2010-05-24 14:32:11 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-01 15:29:48 +03:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-01-14 14:14:16 +01:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
mm: untag user pointers passed to memory syscalls
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
This patch allows tagged pointers to be passed to the following memory
syscalls: get_mempolicy, madvise, mbind, mincore, mlock, mlock2, mprotect,
mremap, msync, munlock, move_pages.
The mmap and mremap syscalls do not currently accept tagged addresses.
Architectures may interpret the tag as a background colour for the
corresponding vma.
Link: http://lkml.kernel.org/r/aaf0c0969d46b2feb9017f3e1b3ef3970b633d91.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25 16:48:30 -07:00
|
|
|
|
|
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2025-02-19 08:36:07 +00:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2016-04-01 15:29:48 +03:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2015-11-05 18:46:38 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
2006-12-16 16:01:50 -08:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2010-05-24 14:32:09 -07:00
|
|
|
|
2020-06-08 21:33:25 -07:00
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|
2006-12-16 09:44:32 -08:00
|
|
|
|
|
|
|
|
|
2005-04-16 15:20:36 -07:00
|
|
|
|