kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-15 19:56:03 +00:00
Code Issues Releases Packages Activity
linux/drivers/interconnect/core.c

1153 lines
27 KiB
Raw Normal View History

interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Move internal structs into a separate file Move the interconnect framework internal structs into a separate file, so that it can be included and used by ftrace code. This will allow us to expose some more useful information in the traces. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:16 +02:00
interconnect: Add basic tracepoints The tracepoints can help with understanding the system behavior of a given interconnect path when the consumer drivers change their bandwidth demands. This might be interesting when we want to monitor the requested interconnect bandwidth for each client driver. The paths may share the same nodes and this will help to understand "who and when is requesting what". All this is useful for subsystem drivers developers and may also provide hints when optimizing the power and performance profile of the system. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:18 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Print the tag in the debugfs summary Now we can have a tag associated with the path. Add this information to the interconnect_summary file, as the current information in debugfs is incomplete. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-20 18:38:46 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Print the tag in the debugfs summary Now we can have a tag associated with the path. Add this information to the interconnect_summary file, as the current information in debugfs is incomplete. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-20 18:38:46 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Show bandwidth for disabled paths as zero in debugfs For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-07-29 10:50:12 -07:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Show bandwidth for disabled paths as zero in debugfs For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-07-29 10:50:12 -07:00
interconnect: Print the tag in the debugfs summary Now we can have a tag associated with the path. Add this information to the interconnect_summary file, as the current information in debugfs is incomplete. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-20 18:38:46 +02:00
interconnect: Show bandwidth for disabled paths as zero in debugfs For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-07-29 10:50:12 -07:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: convert to DEFINE_SHOW_ATTRIBUTE Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-03-27 09:31:37 -04:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add interconnect_graph file to debugfs The interconnect graphs can be difficult to understand and the current "interconnect_summary" file doesn't even display links in any way. Add a new "interconnect_graph" file to debugfs in the graphviz "dot" format which describes interconnect providers, nodes and links. The file is human-readable and can be visualized by piping through graphviz. Example: ssh $TARGET cat /sys/kernel/debug/interconnect/interconnect_graph \ | dot -Tsvg > interconnect_graph.svg Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-19 00:34:01 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add helpers for enabling/disabling a path There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10 18:30:37 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Do not skip aggregation for disabled paths When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase <adhudase@codeaurora.org> Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Atul Dhudase <adhudase@codeaurora.org> Reviewed-by: Atul Dhudase <adhudase@codeaurora.org> Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23 11:37:34 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add pre_aggregate() callback Introduce an optional callback in interconnect provider drivers. It can be used for implementing actions, that need to be executed before the actual aggregation of the bandwidth requests has started. The benefit of this for now is that it will significantly simplify the code in provider drivers. Suggested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-09 15:13:24 +03:00
interconnect: Add helpers for enabling/disabling a path There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10 18:30:37 +03:00
interconnect: Do not skip aggregation for disabled paths When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase <adhudase@codeaurora.org> Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Atul Dhudase <adhudase@codeaurora.org> Reviewed-by: Atul Dhudase <adhudase@codeaurora.org> Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23 11:37:34 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Add helpers for enabling/disabling a path There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10 18:30:37 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Allow inter-provider pairs to be configured This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:41 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Allow inter-provider pairs to be configured This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:41 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Allow inter-provider pairs to be configured This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:41 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Allow inter-provider pairs to be configured This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:41 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a common standard aggregate function Currently there is one very standard aggregation method that is used by several drivers. Let's add this as a common function, so that drivers could just point to it, instead of copy/pasting code. Suggested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 15:48:38 +02:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Relax requirement in of_icc_get_from_provider() This patch relaxes the condition in of_icc_get_from_provider() so that it is no longer required to set '#interconnect-cells' to <1> in the DT, and therefore it is not required to supply dummy node IDs in the 'interconnects' property when node IDs are dynamically generated rather than hardcoded (statically allocated). In case of the devfreq driver for exynos-bus, node IDs are dynamically allocated and '#interconnect-cells' is always zero. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-3-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:40 +02:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Export of_icc_get_from_provider() This patch makes the above function public (for use in exynos-bus devfreq driver). Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-2-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-21 14:28:39 +02:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add devm_of_icc_get() as exported API for users Users can use devm version of of_icc_get() to benefit from automatic resource release. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-15 15:53:10 +05:30
interconnect: Fix undersized devress_alloc allocation The expression sizeof(**ptr) for the void **ptr is just 1 rather than the size of a pointer. Fix this by using sizeof(*ptr). Addresses-Coverity: ("Wrong sizeof argument") Fixes: e145d9a184f2 ("interconnect: Add devm_of_icc_get() as exported API for users") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730075408.19945-1-colin.king@canonical.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-30 08:54:08 +01:00
interconnect: Add devm_of_icc_get() as exported API for users Users can use devm version of of_icc_get() to benefit from automatic resource release. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-15 15:53:10 +05:30
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: core: Simplify with dev_err_probe() Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-02 19:24:32 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: core: Simplify with dev_err_probe() Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-02 19:24:32 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Handle memory allocation errors When we allocate memory, kasprintf() can fail and we must check its return value. Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path") Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-26 13:04:20 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Handle memory allocation errors When we allocate memory, kasprintf() can fail and we must check its return value. Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path") Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-26 13:04:20 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add of_icc_get_by_index() helper function This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-12 15:53:20 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add support for path tags Consumers may have use cases with different bandwidth requirements based on the system or driver state. The consumer driver can append a specific tag to the path and pass this information to the interconnect platform driver to do the aggregation based on this state. Introduce icc_set_tag() function that will allow the consumers to append an optional tag to each path. The aggregation of these tagged paths is platform specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-09 15:13:23 +03:00
interconnect: Add locking in icc_set_tag() We must ensure that the tag is not changed while we aggregate the requests. Currently the icc_set_tag() is not using any locks and this may cause the values to be aggregated incorrectly. Fix this by acquiring the icc_lock while we set the tag. Link: https://lore.kernel.org/lkml/20191018141750.17032-1-georgi.djakov@linaro.org/ Fixes: 127ab2cc5f19 ("interconnect: Add support for path tags") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-10-18 17:17:50 +03:00
interconnect: Add support for path tags Consumers may have use cases with different bandwidth requirements based on the system or driver state. The consumer driver can append a specific tag to the path and pass this information to the interconnect platform driver to do the aggregation based on this state. Introduce icc_set_tag() function that will allow the consumers to append an optional tag to each path. The aggregation of these tagged paths is platform specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-09 15:13:23 +03:00
interconnect: Add locking in icc_set_tag() We must ensure that the tag is not changed while we aggregate the requests. Currently the icc_set_tag() is not using any locks and this may cause the values to be aggregated incorrectly. Fix this by acquiring the icc_lock while we set the tag. Link: https://lore.kernel.org/lkml/20191018141750.17032-1-georgi.djakov@linaro.org/ Fixes: 127ab2cc5f19 ("interconnect: Add support for path tags") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-10-18 17:17:50 +03:00
interconnect: Add support for path tags Consumers may have use cases with different bandwidth requirements based on the system or driver state. The consumer driver can append a specific tag to the path and pass this information to the interconnect platform driver to do the aggregation based on this state. Introduce icc_set_tag() function that will allow the consumers to append an optional tag to each path. The aggregation of these tagged paths is platform specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-08-09 15:13:23 +03:00
opp: Expose bandwidth information via debugfs Expose the bandwidth information as well via debugfs. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-18 14:25:32 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Revert to previous config if any request fails When consumers report their bandwidth needs with icc_set_bw(), it's possible that the requested amount of bandwidth is not available or just the new configuration fails to apply on some path. In this case revert to the previous configuration and propagate the error back to the consumers to let them know that bandwidth is not available, hardware is busy or whatever error is returned by the interconnect platform driver. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:11:03 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Check for valid path in icc_set_bw() Use IS_ERR() to ensure that the path passed to icc_set_bw() is valid. Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-06 19:27:46 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Check for valid path in icc_set_bw() Use IS_ERR() to ensure that the path passed to icc_set_bw() is valid. Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-06 19:27:46 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Revert to previous config if any request fails When consumers report their bandwidth needs with icc_set_bw(), it's possible that the requested amount of bandwidth is not available or just the new configuration fails to apply on some path. In this case revert to the previous configuration and propagate the error back to the consumers to let them know that bandwidth is not available, hardware is busy or whatever error is returned by the interconnect platform driver. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:11:03 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add basic tracepoints The tracepoints can help with understanding the system behavior of a given interconnect path when the consumer drivers change their bandwidth demands. This might be interesting when we want to monitor the requested interconnect bandwidth for each client driver. The paths may share the same nodes and this will help to understand "who and when is requesting what". All this is useful for subsystem drivers developers and may also provide hints when optimizing the power and performance profile of the system. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:18 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Revert to previous config if any request fails When consumers report their bandwidth needs with icc_set_bw(), it's possible that the requested amount of bandwidth is not available or just the new configuration fails to apply on some path. In this case revert to the previous configuration and propagate the error back to the consumers to let them know that bandwidth is not available, hardware is busy or whatever error is returned by the interconnect platform driver. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:11:03 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Revert to previous config if any request fails When consumers report their bandwidth needs with icc_set_bw(), it's possible that the requested amount of bandwidth is not available or just the new configuration fails to apply on some path. In this case revert to the previous configuration and propagate the error back to the consumers to let them know that bandwidth is not available, hardware is busy or whatever error is returned by the interconnect platform driver. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:11:03 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add basic tracepoints The tracepoints can help with understanding the system behavior of a given interconnect path when the consumer drivers change their bandwidth demands. This might be interesting when we want to monitor the requested interconnect bandwidth for each client driver. The paths may share the same nodes and this will help to understand "who and when is requesting what". All this is useful for subsystem drivers developers and may also provide hints when optimizing the power and performance profile of the system. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:18 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add helpers for enabling/disabling a path There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10 18:30:37 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Handle memory allocation errors When we allocate memory, kasprintf() can fail and we must check its return value. Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path") Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-26 13:04:20 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a name to struct icc_path When debugging interconnect things, it turned out that saving the path name and including it in the traces is quite useful, especially for devices with multiple paths. For the path name we use the one specified in DT, or if we use platform data, the name is based on the source and destination node names. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-28 16:18:17 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: core: fix error return code of icc_link_destroy() When krealloc() fails and new is NULL, no error return code of icc_link_destroy() is assigned. To fix this bug, ret is assigned with -ENOMEM hen new is NULL. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20210306132857.17020-1-baijiaju1990@gmail.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-03-08 15:09:15 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Sanity check that node isn't already on list Broken interconnect providers might add the same node multiple times or in multiple providers, which causes strange errors as the provider's node list is later traversed. Detect that a node already has an associated provider, complain and reject the addition of the node, to aid the developer. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210625234903.1324755-1-bjorn.andersson@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-06-25 16:49:03 -07:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Always call pre_aggregate before aggregate The pre_aggregate callback isn't called in all cases before calling aggregate. Add the missing calls so providers can rely on consistent framework behavior. Fixes: d3703b3e255f ("interconnect: Aggregate before setting initial bandwidth") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-21 10:54:30 -07:00
interconnect: Aggregate before setting initial bandwidth When setting the initial bandwidth, make sure to call the aggregate() function (if such is implemented for the current provider), to handle cases when data needs to be aggregated first. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Acked-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20201013135913.29059-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-10-13 16:59:11 +03:00
interconnect: Always call pre_aggregate before aggregate The pre_aggregate callback isn't called in all cases before calling aggregate. Add the missing calls so providers can rely on consistent framework behavior. Fixes: d3703b3e255f ("interconnect: Aggregate before setting initial bandwidth") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-21 10:54:30 -07:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add a common helper for removing all nodes The removal of all nodes from a provider seem to be a common functionality for all existing users and it would make sense to factor out this into a a common helper function. Suggested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-12-02 18:21:32 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Introduce xlate_extended() callback Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03 16:31:28 +03:00
interconnect: Allow endpoints translation via DT Currently we support only platform data for specifying the interconnect endpoints. As now the endpoints are hard-coded into the consumer driver this may lead to complications when a single driver is used by multiple SoCs, which may have different interconnect topology. To avoid cluttering the consumer drivers, introduce a translation function to help us get the board specific interconnect data from device-tree. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:58 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Restore sync state by ignoring ipa-virt in provider count Ignore compatible strings for the IPA virt drivers that were removed in commits 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") and 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") so that the sync state logic can kick in again. Otherwise all the interconnects in the system will stay pegged at max speeds because 'providers_count' is always going to be one larger than the number of drivers that will ever probe on sc7180 or sdx55. This fixes suspend on sc7180 and sdx55 devices when you don't have a devicetree patch to remove the ipa-virt compatible node. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") Fixes: 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-04-26 18:32:26 -07:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Restore sync state by ignoring ipa-virt in provider count Ignore compatible strings for the IPA virt drivers that were removed in commits 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") and 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") so that the sync state logic can kick in again. Otherwise all the interconnects in the system will stay pegged at max speeds because 'providers_count' is always going to be one larger than the number of drivers that will ever probe on sc7180 or sdx55. This fixes suspend on sc7180 and sdx55 devices when you don't have a devicetree patch to remove the ipa-virt compatible node. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Alex Elder <elder@linaro.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Mike Tipton <quic_mdtipton@quicinc.com> Fixes: 2fb251c26560 ("interconnect: qcom: sdx55: Drop IP0 interconnects") Fixes: 2f3724930eb4 ("interconnect: qcom: sc7180: Drop IP0 interconnects") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220427013226.341209-1-swboyd@chromium.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-04-26 18:32:26 -07:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Zero initial BW after sync-state The initial BW values may be used by providers to enforce floors. Zero these values after sync-state so that providers know when to stop enforcing them. Fixes: b1d681d8d324 ("interconnect: Add sync state support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20210721175432.2119-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-07-21 10:54:29 -07:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add sync state support The bootloaders often do some initial configuration of the interconnects in the system and we want to keep this configuration until all consumers have probed and expressed their bandwidth needs. This is because we don't want to change the configuration by starting to disable unused paths until every user had a chance to request the amount of bandwidth it needs. To accomplish this we will implement an interconnect specific sync_state callback which will synchronize (aggregate and set) the current bandwidth settings when all consumers have been probed. Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-25 20:01:51 +03:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add interconnect_graph file to debugfs The interconnect graphs can be difficult to understand and the current "interconnect_summary" file doesn't even display links in any way. Add a new "interconnect_graph" file to debugfs in the graphviz "dot" format which describes interconnect providers, nodes and links. The file is human-readable and can be visualized by piping through graphviz. Example: ssh $TARGET cat /sys/kernel/debug/interconnect/interconnect_graph \ | dot -Tsvg > interconnect_graph.svg Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-11-19 00:34:01 +02:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Remove unused module exit code from core The interconnect core is currently always built in: menuconfig INTERCONNECT bool "On-Chip Interconnect management support" So remove the module_exit function and symbolically rename module_init to device_initcall to drive home the point. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1572546532-19248-3-git-send-email-jcrouse@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2019-10-31 12:28:52 -06:00
interconnect: Add debugfs support Add a functionality to provide information about the current constraints per each node and provider. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:59 +02:00
interconnect: Add generic on-chip interconnect API This patch introduces a new API to get requirements and configure the interconnect buses across the entire chipset to fit with the current demand. The API is using a consumer/provider-based model, where the providers are the interconnect buses and the consumers could be various drivers. The consumers request interconnect resources (path) between endpoints and set the desired constraints on this data flow path. The providers receive requests from consumers and aggregate these requests for all master-slave pairs on that path. Then the providers configure each node along the path to support a bandwidth that satisfies all bandwidth requests that cross through that node. The topology could be complicated and multi-tiered and is SoC specific. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-16 18:10:56 +02:00