kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/gpu/drm/tiny/ofdrm.c

1405 lines
39 KiB
Raw Normal View History

drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Use video aperture helpers DRM's aperture functions have long been implemented as helpers under drivers/video/ for use with fbdev. Avoid the DRM wrappers by calling the video functions directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-14-tzimmermann@suse.de
2024-09-30 15:03:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/client: Move public client header to clients/ subdirectory Move the public header file drm_client_setup.h to the clients/ subdirectory and update all drivers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241108154600.126162-3-tzimmermann@suse.de
2024-11-08 16:42:38 +01:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/tiny/ofdrm: Use fbdev-shmem Implement fbdev emulation with fbdev-shmem. Avoids the overhead of fbdev-generic's additional shadow buffering. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-17-tzimmermann@suse.de
2024-04-19 10:29:09 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm: Use of_property_read_bool() for boolean properties It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20230310144706.1542295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-10 08:47:05 -06:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm: Use of_property_read_bool() for boolean properties It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20230310144706.1542295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-10 08:47:05 -06:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Convert PCI IDs to CPU endianness for comparing Properties of 32-bit integers are returned from the OF device tree as type __be32. Convert PCI vendor and device IDs from __be32 to host endianness before comparing them to constants. All relevant machines are old, big-endian Macintosh systems; hence the bug never happened in practice. Fixes sparse warnings shown below. drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer See [1] for the bug report. v2: * convert endianness (Alex) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de
2022-11-03 11:16:26 +01:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Convert PCI IDs to CPU endianness for comparing Properties of 32-bit integers are returned from the OF device tree as type __be32. Convert PCI vendor and device IDs from __be32 to host endianness before comparing them to constants. All relevant machines are old, big-endian Macintosh systems; hence the bug never happened in practice. Fixes sparse warnings shown below. drivers/gpu/drm/tiny/ofdrm.c:237:17: warning: restricted __be32 degrades to integer drivers/gpu/drm/tiny/ofdrm.c:238:18: warning: restricted __be32 degrades to integer drivers/gpu/drm/tiny/ofdrm.c:238:54: warning: restricted __be32 degrades to integer See [1] for the bug report. v2: * convert endianness (Alex) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210192208.D888I6X7-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-2-tzimmermann@suse.de
2022-11-03 11:16:26 +01:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Cast error pointers to void __iomem * Cast error pointers when returning them as void __iomem *. Fixes a number of Sparse warnings, such as the ones shown below. ../drivers/gpu/drm/tiny/ofdrm.c:439:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:439:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:439:31: got void * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: warning: incorrect type in return expression (different address spaces) ../drivers/gpu/drm/tiny/ofdrm.c:442:31: expected void [noderef] __iomem * ../drivers/gpu/drm/tiny/ofdrm.c:442:31: got void * See [1] for the bug report. v3: * use IOMEM_ERR_PTR() (Javier) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/dri-devel/202210200016.yiQzPIy0-lkp@intel.com/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221103101627.32502-3-tzimmermann@suse.de
2022-11-03 11:16:27 +01:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Preallocate format-conversion buffer in atomic_check Preallocate the format-conversion state's storage in the plane's atomic_check function if a format conversion is necessary. Allows the update to fail if no memory is available. Avoids the same allocation within atomic_update, which may not fail. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-5-tzimmermann@suse.de
2023-10-09 16:06:33 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Preallocate format-conversion buffer in atomic_check Preallocate the format-conversion state's storage in the plane's atomic_check function if a format conversion is necessary. Allows the update to fail if no memory is available. Avoids the same allocation within atomic_update, which may not fail. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-5-tzimmermann@suse.de
2023-10-09 16:06:33 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Preallocate format-conversion buffer in atomic_check Preallocate the format-conversion state's storage in the plane's atomic_check function if a format conversion is necessary. Allows the update to fail if no memory is available. Avoids the same allocation within atomic_update, which may not fail. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-5-tzimmermann@suse.de
2023-10-09 16:06:33 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/format-helper: Pass format-conversion state to helpers Pass an instance of struct drm_format_conv_state to DRM's format conversion helpers. Update all callers. Most drivers can use the format-conversion state from their shadow- plane state. The shadow plane's destroy function releases the allocated buffer. Drivers will later be able to allocate a buffer of appropriate size in their plane's atomic_check code. The gud driver uses a separate thread for committing updates. For now, the update worker contains its own format-conversion state. Images in the format-helper tests are small. The tests preallocate a static page for the temporary buffer. Unloading the module releases the memory. v6: * update patch for ssd132x support v5: * avoid using unusupported shadow-plane state in repaper (Noralf) * fix documentation (Noralf, kernel test robot) v3: * store buffer in shadow-plane state (Javier, Maxime) * replace ARRAY_SIZE() with sizeof() (Jani) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Javier Martinez Canillas <javierm@redhat.com> # ssd130x Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-4-tzimmermann@suse.de
2023-10-09 16:06:32 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add CRTC state Add a dedicated CRTC state to ofdrm to later store information for palette updates. v3: * rework CRTC state helpers (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-3-tzimmermann@suse.de
2022-10-11 17:07:09 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Add per-model device function Add a per-model device-function structure in preparation of adding color-management support. Detection of the individual models has been taken from fbdev's offb. v3: * define constants for PCI ids (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-4-tzimmermann@suse.de
2022-10-11 17:07:10 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Use video aperture helpers DRM's aperture functions have long been implemented as helpers under drivers/video/ for use with fbdev. Avoid the DRM wrappers by calling the video functions directly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240930130921.689876-14-tzimmermann@suse.de
2024-09-30 15:03:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Set preferred depth from format of scanout buffer Set the preferred depth from the format of the scanout buffer. The value cannot be hardcoded, as the scanout buffer is only known at runtime. Keeping the existing switch statement just duplicates the driver's existing logic for format detection. Also remove the FIXME comment from the call to drm_fbdev_generic_setup() as the driver now handles color depth and bpp values correctly. v2: * fix commit-message typo Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20221123115348.2521-5-tzimmermann@suse.de
2022-11-23 12:53:45 +01:00
drm/ofdrm: Support big-endian scanout buffers All DRM formats assume little-endian byte order. On big-endian systems, it is likely that the scanout buffer is in big endian as well. Update the format accordingly and add endianness conversion to the format-helper library. Also opt-in to allocated buffers in host format by default. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-6-tzimmermann@suse.de
2022-10-11 17:07:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Support color management Support the CRTC's color-management property and implement each model's palette support. The OF hardware has different methods of setting the palette. The respective code has been taken from fbdev's offb and refactored into per-model device functions. The device functions integrate this functionality into the overall modesetting. As palette handling is a CRTC property that depends on the primary plane's color format, the plane's atomic_check helper now updates the format field in ofdrm's custom CRTC state. The CRTC's atomic_flush helper updates the palette for the format as needed. v4: * use cpu_to_be32() (Geert) v3: * lookup CRTC state with drm_atomic_get_new_crtc_state() * access HW palette with writeb(), writel(), and readl() (Ben) * declare register values as u32 Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-5-tzimmermann@suse.de
2022-10-11 17:07:11 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Use DRM default client setup Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-58-tzimmermann@suse.de
2024-09-24 09:12:55 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/ofdrm: Use DRM default client setup Call drm_client_setup() to run the kernel's default client setup for DRM. Set fbdev_probe in struct drm_driver, so that the client setup can start the common fbdev client. v5: - select DRM_CLIENT_SELECTION Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-58-tzimmermann@suse.de
2024-09-24 09:12:55 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
drm/tiny: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the tiny drm drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230507162616.1368908-50-u.kleine-koenig@pengutronix.de
2023-05-07 18:26:12 +02:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00
Get rid of 'remove_new' relic from platform driver struct The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-01 15:12:43 -08:00
drm/ofdrm: Add ofdrm for Open Firmware framebuffers Open Firmware provides basic display output via the 'display' node. DT platform code already provides a device that represents the node's framebuffer. Add a DRM driver for the device. The display mode and color format is pre-initialized by the system's firmware. Runtime modesetting via DRM is not possible. The display is useful during early boot stages or as error fallback. Similar functionality is already provided by fbdev's offb driver, which is insufficient for modern userspace. The old driver includes support for BootX device tree, which can be found on old 32-bit PowerPC Macintosh systems. If these are still in use, the functionality can be added to ofdrm or implemented in a new driver. As with simpledrm, the fbdev driver cannot be selected if ofdrm is already enabled. Two notable points about the driver: * Reading the framebuffer aperture from the device tree is not reliable on all systems. Ofdrm takes the heuristics and a comment from offb to pick the correct range. * No resource management may be tied to the underlying PCI device. Otherwise the handover to the native driver will fail with a resource conflict. PCI management is therefore done as part of the platform device's cleanup. The driver has been tested on qemu's ppc64le emulation. The device hand-over has been tested with bochs. v5: * use drm_atomic_helper_check_crtc_primary_plane() v4: * set preferred depth to the correct value * set bpp value for console emulation * output scanout-buffer parameters with drm_dbg() v3: * reintegrate FWFB helpers into ofdrm * use damage iterator * sync GEM BOs with drm_gem_fb_{begin,end}_cpu_access() * fix various atomic_check helpers * remove CRTC atomic_{enable,disable} (Javier) * compute stride with drm_format_info_min_pitch() (Daniel) v2: * removed simple-pipe helpers * built driver on top of FWFB helpers * merged all init code into single function * make PCI support optional (Michal) * support COMPILE_TEST (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> convert Link: https://patchwork.freedesktop.org/patch/msgid/20221011150712.3928-2-tzimmermann@suse.de
2022-10-11 17:07:08 +02:00