linux/drivers/phy/tegra/xusb.c

1551 lines
36 KiB

phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: xusb: Fix usb_phy device driver field In commit "phy: tegra: xusb: Add usb-phy support", an OTG capable PHY device, such as phy-usb2.0 device of Jetson-TX1 platform, will be bound to the tegra-xusb-padctl driver by the following line in tegra_xusb_setup_usb_role_switch(). port->usb_phy.dev->driver = port->padctl->dev->driver; With this, dev_pm_ops set of tegra-xusb-padctl driver will be invoked for the OTG capable PHY incorrectly as below logs show. This commit fixes the issue by assigning an empty driver to it. [ 153.451108] tegra-xusb-padctl phy-usb2.0: > tegra_xusb_padctl_suspend_noirq(dev=ffff000080917000) [ 153.460353] tegra-xusb-padctl phy-usb2.0: driver: ffff8000114453e0 (tegra_xusb_padctl_driver) [ 153.469245] tegra-xusb-padctl phy-usb2.0: padctl: ffff0000829f6480 [ 153.475772] tegra-xusb-padctl phy-usb2.0: soc: ef7bdd7fffffffff (0xef7bdd7fffffffff) [ 153.484061] Unable to handle kernel paging request at virtual address 007bdd800000004f [ 153.492132] Mem abort info: [ 153.495083] ESR = 0x96000004 [ 153.498308] EC = 0x25: DABT (current EL), IL = 32 bits [ 153.503771] SET = 0, FnV = 0 [ 153.506979] EA = 0, S1PTW = 0 [ 153.510260] Data abort info: [ 153.513200] ISV = 0, ISS = 0x00000004 [ 153.517181] CM = 0, WnR = 0 [ 153.520302] [007bdd800000004f] address between user and kernel address ranges [ 153.527600] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 153.533231] Modules linked in: nouveau panel_simple tegra_video(C) tegra_drm drm_ttm_helper videobuf2_dma_contig ttm videobuf2_memops cec videobuf2_v4l2 videobuf2_common drm_kms_helper v4l2_fwnode videodev drm mc snd_hda_codec_hdmi cdc_ether usbnet snd_hda_tegra r8152 crct10dif_ce snd_hda_codec snd_hda_core tegra_xudc host1x lp855x_bl at24 ip_tables x_tables ipv6 [ 153.566417] CPU: 0 PID: 300 Comm: systemd-sleep Tainted: G C 5.10.0-rc3-next-20201113-00019-g5c064d5372b0-dirty #624 [ 153.578283] Hardware name: NVIDIA Jetson TX1 Developer Kit (DT) [ 153.584281] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 153.590381] pc : tegra_xusb_padctl_suspend_noirq+0x88/0x100 [ 153.596016] lr : tegra_xusb_padctl_suspend_noirq+0x80/0x100 [ 153.601632] sp : ffff8000120dbb60 [ 153.604999] x29: ffff8000120dbb60 x28: ffff000080a1df00 [ 153.610430] x27: 0000000000000002 x26: ffff8000106f8540 [ 153.615858] x25: ffff8000113ac4a4 x24: ffff80001148c198 [ 153.621277] x23: ffff800010c4538c x22: 0000000000000002 [ 153.626692] x21: ffff800010ccde80 x20: ffff0000829f6480 [ 153.632107] x19: ffff000080917000 x18: 0000000000000030 [ 153.637521] x17: 0000000000000000 x16: 0000000000000000 [ 153.642933] x15: ffff000080a1e380 x14: 74636461702d6273 [ 153.648346] x13: ffff8000113ad058 x12: 0000000000000f39 [ 153.653759] x11: 0000000000000513 x10: ffff800011405058 [ 153.659176] x9 : 00000000fffff000 x8 : ffff8000113ad058 [ 153.664590] x7 : ffff800011405058 x6 : 0000000000000000 [ 153.670002] x5 : 0000000000000000 x4 : ffff0000fe908bc0 [ 153.675414] x3 : ffff0000fe910228 x2 : 162ef67e0581e700 [ 153.680826] x1 : 162ef67e0581e700 x0 : ef7bdd7fffffffff [ 153.686241] Call trace: [ 153.688769] tegra_xusb_padctl_suspend_noirq+0x88/0x100 [ 153.694077] __device_suspend_noirq+0x68/0x1cc [ 153.698594] dpm_noirq_suspend_devices+0x10c/0x1d0 [ 153.703456] dpm_suspend_noirq+0x28/0xa0 [ 153.707461] suspend_devices_and_enter+0x234/0x4bc [ 153.712314] pm_suspend+0x1e4/0x270 [ 153.715868] state_store+0x8c/0x110 [ 153.719440] kobj_attr_store+0x1c/0x30 [ 153.723259] sysfs_kf_write+0x4c/0x7c [ 153.726981] kernfs_fop_write+0x124/0x240 [ 153.731065] vfs_write+0xe4/0x204 [ 153.734449] ksys_write+0x6c/0x100 [ 153.737925] __arm64_sys_write+0x20/0x30 [ 153.741931] el0_svc_common.constprop.0+0x78/0x1a0 [ 153.746789] do_el0_svc+0x24/0x90 [ 153.750181] el0_sync_handler+0x254/0x260 [ 153.754251] el0_sync+0x174/0x180 [ 153.757663] Code: aa0303e2 94000f64 f9405680 b40000e0 (f9402803) [ 153.763826] ---[ end trace 81543a3394cb409d ]--- Fixes: e8f7d2f409a1 ("phy: tegra: xusb: Add usb-phy support") Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201117083803.185209-1-jckuo@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-17 16:38:03 +08:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 11:52:13 +01:00
phy: tegra: xusb: Fix dangling pointer on probe failure If, for some reason, the xusb PHY fails to probe, it leaves a dangling pointer attached to the platform device structure. This would normally be harmless, but the Tegra XHCI driver then goes and extract that pointer from the PHY device. Things go downhill from there: 8.752082] [004d554e5145533c] address between user and kernel address ranges [ 8.752085] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 8.752088] Modules linked in: max77620_regulator(E+) xhci_tegra(E+) sdhci_tegra(E+) xhci_hcd(E) sdhci_pltfm(E) cqhci(E) fixed(E) usbcore(E) scsi_mod(E) sdhci(E) host1x(E+) [ 8.752103] CPU: 4 PID: 158 Comm: systemd-udevd Tainted: G S W E 5.9.0-rc7-00298-gf6337624c4fe #1980 [ 8.752105] Hardware name: NVIDIA Jetson TX2 Developer Kit (DT) [ 8.752108] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 8.752115] pc : kobject_put+0x1c/0x21c [ 8.752120] lr : put_device+0x20/0x30 [ 8.752121] sp : ffffffc012eb3840 [ 8.752122] x29: ffffffc012eb3840 x28: ffffffc010e82638 [ 8.752125] x27: ffffffc008d56440 x26: 0000000000000000 [ 8.752128] x25: ffffff81eb508200 x24: 0000000000000000 [ 8.752130] x23: ffffff81eb538800 x22: 0000000000000000 [ 8.752132] x21: 00000000fffffdfb x20: ffffff81eb538810 [ 8.752134] x19: 3d4d554e51455300 x18: 0000000000000020 [ 8.752136] x17: ffffffc008d00270 x16: ffffffc008d00c94 [ 8.752138] x15: 0000000000000004 x14: ffffff81ebd4ae90 [ 8.752140] x13: 0000000000000000 x12: ffffff81eb86a4e8 [ 8.752142] x11: ffffff81eb86a480 x10: ffffff81eb862fea [ 8.752144] x9 : ffffffc01055fb28 x8 : ffffff81eb86a4a8 [ 8.752146] x7 : 0000000000000001 x6 : 0000000000000001 [ 8.752148] x5 : ffffff81dff8bc38 x4 : 0000000000000000 [ 8.752150] x3 : 0000000000000001 x2 : 0000000000000001 [ 8.752152] x1 : 0000000000000002 x0 : 3d4d554e51455300 [ 8.752155] Call trace: [ 8.752157] kobject_put+0x1c/0x21c [ 8.752160] put_device+0x20/0x30 [ 8.752164] tegra_xusb_padctl_put+0x24/0x3c [ 8.752170] tegra_xusb_probe+0x8b0/0xd10 [xhci_tegra] [ 8.752174] platform_drv_probe+0x60/0xb4 [ 8.752176] really_probe+0xf0/0x504 [ 8.752179] driver_probe_device+0x100/0x170 [ 8.752181] device_driver_attach+0xcc/0xd4 [ 8.752183] __driver_attach+0xb0/0x17c [ 8.752185] bus_for_each_dev+0x7c/0xd4 [ 8.752187] driver_attach+0x30/0x3c [ 8.752189] bus_add_driver+0x154/0x250 [ 8.752191] driver_register+0x84/0x140 [ 8.752193] __platform_driver_register+0x54/0x60 [ 8.752197] tegra_xusb_init+0x40/0x1000 [xhci_tegra] [ 8.752201] do_one_initcall+0x54/0x2d0 [ 8.752205] do_init_module+0x68/0x29c [ 8.752207] load_module+0x2178/0x26c0 [ 8.752209] __do_sys_finit_module+0xb0/0x120 [ 8.752211] __arm64_sys_finit_module+0x2c/0x40 [ 8.752215] el0_svc_common.constprop.0+0x80/0x240 [ 8.752218] do_el0_svc+0x30/0xa0 [ 8.752220] el0_svc+0x18/0x50 [ 8.752223] el0_sync_handler+0x90/0x318 [ 8.752225] el0_sync+0x158/0x180 [ 8.752230] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (3940f000) [ 8.752232] ---[ end trace 90f6c89d62d85ff5 ]--- Reset the pointer on probe failure fixes the issue. Fixes: 53d2a715c2403 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201013095820.311376-1-maz@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-10-13 10:58:20 +01:00