linux/tools/power/pm-graph/sleepgraph.py

7212 lines
234 KiB

pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph: sleepgraph: Avoid crashing on binary data in device names A regression has occurred in the hid-sensor code where a device name string has not been initialized to 0, and ends up without a NULL char and is printed with %s. This includes random binary data in the device name, which makes its way into the ftrace output and ends up crashing sleepgraph because it expects the ftrace output to be ASCII only. For example: "HID-SENSOR-INT-020b?.39.auto" ends up in ftrace instead of "HID-SENSOR-INT-020b.39.auto". It causes this crash in sleepgraph: File "/usr/bin/sleepgraph", line 5579, in executeSuspend for line in fp: File "/usr/lib/python3.10/codecs.py", line 322, in decode (result, consumed) = self._buffer_decode(data, self.errors, final) UnicodeDecodeError: 'utf-8' codec can't decode byte 0xff in position 1568: invalid start byte The issue is present in 6.3-rc1 and is described in full here: https://bugzilla.kernel.org/show_bug.cgi?id=217169 A separate fix has been submitted to have this issue repaired, but it has also exposed a larger bug in sleepgraph, since nothing should make sleepgraph crash. Sleepgraph needs to be able to handle binary data showing up in ftrace gracefully. Modify the ftrace processing code to treat it as potentially binary and to filter out binary data and leave just the ASCII. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217169 Fixes: 98c062e82451 ("HID: hid-sensor-custom: Allow more custom iio sensors") Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-13 15:26:52 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.7 - important s2idle fixes Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-20 18:02:49 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
pm-graph v5.5 Upgrade bootgraph/sleepgraph to be able to run on python2 and python3. Both now simply require python, the system can choose which to use. bootgraph python3 update: - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - open dmesg log and popen in binary, use decode(ascii, ignore) - sort all html data to allow diff between python versions - change exception handler to use python3 as instead of comma sleepgraph python3 update: - import configparser not ConfigParser (p2 needs python-configparser) - add floor function to handle integer arithmetic - change argument loop to use next() instead of args.next() - handle popen output in binary, use decode(ascii, ignore) - sort all html/output data to allow diff between python versions - force gzip open to use text mode, same for file open - ensure no binary data is written to logs (ascii convert devprops info) - use codecs library to handle zlib encoding for mcelog data - remove all uses of python3.7 keyword "async" as members or vars - assume all FPDT and DMI data is in binary string form sleepgraph: - turbostat will be used by default if it's found & the mode is freeze - a new option "-noturbostat" will disable its use - fix bug where two callgraphs with the same start time overwrite. - fix s2idle processing where two suspend/resume_machines occur back2back - update getexec function to use which first (assuming PATH exists) - new platforminfo data in log with: lspci, gpe counts, /proc/interrupts - new data is zipped, b64 encoded, and tacked on the end of ftrace Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-12 14:08:44 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
pm-graph v5.6 sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-08 10:58:19 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00
2018-10-08 15:56:31 -07:00