kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-15 19:56:03 +00:00
Code Issues Releases Packages Activity
linux/drivers/input/misc/Makefile

79 lines
3.7 KiB
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 15:20:36 -07:00
input: Support onkey in 88pm860x Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-02-03 15:40:59 -05:00
input: Add onkey support for 88PM80X PMIC Add onkey support for MARVELL 88PM80X PMIC. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-17 15:17:39 +08:00
Input: add support for PowerOn button on the AB8500 MFD Add the PowerOn (PonKey) button support to detect power on/off events. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-05 12:18:47 -07:00
Input: add Analog Devices AD714x captouch input driver AD7142 and AD7147 are integrated capacitance-to-digital converters (CDCs) with on-chip environmental calibration for use in systems requiring a novel user input method. The AD7142 and AD7147 can interface to external capacitance sensors implementing functions such as buttons, scrollwheels, sliders, touchpads and so on. The chips don't restrict the specific usage. Depending on the hardware connection, one special target board can include one or several these components. The platform_data for the device's "struct device" holds these information. The data-struct defined in head file descript the hardware feature of button/scrollwheel/slider/touchpad components on target boards, which need be filled in the arch/mach-/. As the result, the driver is independent of boards. It gets the components layout from the platform_data, registers related devices, fullfills the algorithms and state machines for these components and report related input events to up level. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-21 23:23:24 -07:00
Input: add driver for ADXL345/346 Digital Accelerometers This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-25 08:44:10 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input - arizona-haptics: Add driver haptics module on Arizona CODECs The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-26 21:17:21 +00:00
Input: move USB miscellaneous devices under drivers/input/misc This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-07 17:31:32 -04:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add Atmel Captouch Button driver Add I2C driver for Atmel Capacitive Touch Button device. Signed-off-by: Hung-yu Wu <hywu@google.com> Signed-off-by: Grant Grundler <grundler@chromium.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-18 14:55:12 -07:00
Input: add Blackfin rotary input driver This driver handles the Blackfin on-chip rotary peripheral. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-22 21:51:34 -07:00
Input: add driver for Bosch Sensortec's BMA150 accelerometer Signed-off-by: Albert Zhang <xu.zhang@bosch-sensortec.com> Signed-off-by: Eric Andersson <eric.andersson@unixphere.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-09 00:06:37 -07:00
Input: add driver for USB VoIP phones with CM109 chipset Signed-off-by: Alfred E. Heggestad <aeh@db.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08 11:49:08 -04:00
Input: add CMA3000 accelerometer driver Add support for CMA3000 Tri-axis accelerometer, which supports Motion detect, Measurement and Free fall modes. CMA3000 supports both I2C/SPI bus for communication, currently the driver supports I2C based communication. Signed-off-by: Hemanth V <hemanthv@ti.com> Reviewed-by: Jonathan Cameron <jic23@cam.ac.uk> Reviewed-by: Sergio Aguirre <saaguirre@ti.com> Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-11-30 23:03:54 -08:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add support for OnKey module for DA9052/53 PMIC On-key Driver for Dialog Semiconductor DA9052/53 PMICs. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-04 08:40:58 -08:00
Input: add DA9055 Onkey driver This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the DA9055 MFD core driver. This driver was functionally tested on SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:27:25 -07:00
Input: add OnKey driver for DA9063 MFD part This adds OnKey driver support for DA9063. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-08 16:26:20 -07:00
Input: add dm355evm_keys driver Simple input driver support for the events reported by the MSP430 firmware on the DM355 EVM. Verified using the RC5 remote included with the kit; docs weren't quite right. Some of the keycode selections might need improvement; they can be remapped, so there's at least a runtime workaround. (I also suspect Linux may someday merit more generic support for RC5 based remote controls.) These events don't distinguish key press vs release events, so this reports both and then skips the next event if it's identical. The RC5 remote codes include a "toggle" bit that can help detect autorepeated keys; but this driver doesn't bother with those nuances. This driver relies on the drivers/mfd/dm355evm_msp.c code for core features, including sharing I2C access to this firmware with GPIO, LED, and RTC support. [dtor@mail.ru: fix error unwindng path in probe()] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-23 19:25:29 -07:00
Input: add support for NI Ettus Research USRP E3x0 button Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-10 14:04:14 -08:00
Input: drv260x - add TI drv260x haptics driver Add the TI drv260x haptics/vibrator driver. This device uses the input force feedback to produce a wave form to driver an ERM or LRA actuator device. The initial driver supports the devices real time playback mode. But the device has additional wave patterns in ROM. This functionality will be added in future patchsets. Product data sheet is located here: http://www.ti.com/product/drv2605 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-17 09:24:26 -07:00
Input: add TI drv2665 haptics driver Add the TI drv2665 piezo haptic driver. This haptics IC requires the data to be streamed to the FIFO for continuous output. Datasheet can be found at: http://www.ti.com/product/drv2665 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-08 16:02:43 -07:00
Input: add support for the DRV2667 haptic driver Adding support for the DRV2667 haptic driver. This device has the ability to store vibration patterns in RAM and execute them once the GO bit is set. The initial driver sets a basic waveform in the first waveform sequence and will play the waveform when the GO bit is set and will continously play the waveform until the GO bit is unset. Data sheet is here: http://www.ti.com/product/drv2667 Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-08 16:10:49 -07:00
Input: add driver for Sharp gp2ap002a00f proximity sensor This driver adds support for Sharp's GP2AP002A00F proximity sensor. The proximity is measured as a binary switch, i.e. an object is either detected or not detected. Hence, this driver is implemented as a switch that reports SW_FRONT_PROXIMITY. Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-11 23:38:27 -08:00
Input: add a new driver for GPIO beeper This patch adds a new driver for the beeper controlled via GPIO pin. The driver does not depend on the architecture and is positioned as a replacement for the specific drivers that are used for this function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-11-25 19:17:09 -08:00
Input: add generic GPIO-tilt driver There exist tilt switches that simply report their tilt-state via some gpios. The number and orientation of their axes can vary depending on the switch used and the build of the device. Also two or more one-axis switches could be combined to provide multi-dimensional orientation. One example of a device using such a switch is the family of Qisda ebook readers, where the switch provides information about the landscape / portrait orientation of the device. The example in Documentation/input/gpio-tilt.txt documents exactly this one-axis device. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29 11:04:09 -08:00
Input: add powerkey driver for HISI 65xx SoC This driver provides a input driver for the power button on the HiSi 65xx SoC for boards like HiKey. This driver was originally by Zhiliang Xue <xuezhiliang@huawei.com> then basically rewritten by Jorge, but preserving the original module author credits. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> [jstultz: Reworked commit message, folded in other fixes/cleanups from Jorge, implemented some larger cleanups suggested by DmitryT] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-06-22 17:22:03 -07:00
Input: add driver for Sharp gp2ap002a00f proximity sensor This driver adds support for Sharp's GP2AP002A00F proximity sensor. The proximity is measured as a binary switch, i.e. an object is either detected or not detected. Hence, this driver is implemented as a switch that reports SW_FRONT_PROXIMITY. Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-11 23:38:27 -08:00
Input: add IMS Passenger Control Unit driver The PCU is a device installed in the armrest of a plane seat and is connected to IMS Rave Entertainment System. It has a set of control buttons (Volume Up/Down, Attendant, Lights, etc) on one side and gamepad-like controls on the other side. Originally the device was handled from userspace and because of that it presents itself on USB bus as a CDC-ACM modem device that however can not make calls. However the custom handling is not as convenient as using standard input subsystem facilities. If it was pure input device it would be possible to continue using userspace solution (moving it over to uinput), but the device also has backlighted keys which can not be supported via uinput. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-02-02 11:26:13 -08:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add support for Kionix KXTJ9 accelerometer Signed-off-by: Chris Hudson <chudson@kionix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-07-06 18:36:51 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add haptic driver on max77693 This driver to supports the haptic controller on MAX77693 Multifunction device with PMIC, CHARGER, LED, MUIC, HAPTIC. This driver supports external pwm and LRA (Linear Resonant Actuator) motor. User can control the haptic device via force feedback framework. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-11 23:15:01 -07:00
Input: enable onkey driver of max8925 When ONKEY is held for 3 seconds, KEY_POWER event is reported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-22 00:57:26 -07:00
Input: add driver support for MAX8997-haptic The MAX8997-haptic function can be used to control motor. User can control the haptic driver by using force feedback framework. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-16 12:28:22 -07:00
input: Add power button support for mc13783 This adds support for the power-on buttons of MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-09-18 18:10:53 +02:00
Input: add support for mma8450 accelerometer Signed-off-by: Sammy He <r62914@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-22 01:02:50 -07:00
Input: add a driver to support InvenSense mpu3050 gyroscope chip This driver is registered as an input device. An IRQ is required in this basic driver configuration. Signed-off-by: Joseph Lai <joseph_lai@wistron.com> [Cleaned up PM_RUNTIME defines] Signed-off-by: Alan Cox <alan@linux.intel.com> [dtor@mail.ru: consolidated PM methods, some code rearrangement] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-06-27 13:26:53 -07:00
Input: introduce palmas-pwrbutton Many palmas family of PMICs have support for interrupt based power button. This allows the device to notify the processor of external push button events over the shared palmas interrupt. However, this event is generated only during a "press" operation. Software is supposed to poll(sigh!) for detecting a release event. The PMIC also supports ability to power off independent of the software decisions when the button is pressed for a long duration if the PMIC is appropriately configured on the platform. Even though the function is similar to twl4030_pwrbutton, it is substantially different in operation to belong to a new driver of it's own. Based on original work done by Girish S Ghongdemath <girishsg@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26 15:57:47 -07:00
input: PCAP2 misc input driver This is a driver for misc input events for the PCAP2 PMIC, it handles the Power key and the Headphone button. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-08-10 20:27:48 +02:00
input: PCF50633 input driver Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 01:50:58 +01:00
Input: add PCF8574 I2C keypad input device driver Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-19 22:18:15 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add Qualcomm PM8941 power key driver Signed-off-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-20 21:45:59 -07:00
Input: add support for pm8xxx based vibrator driver Add support for pm8xx based vibrator to facilitate haptics. This module uses the ff-memless framework. Signed-off-by: Amy Maloche <amaloche@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-08-01 23:41:44 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: Add pwm beeper driver This patch adds a simple driver which allows to use pwm based beepers (for example piezo elements) as a pcspkr-like device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14 00:25:21 -07:00
Input: add driver for S1 button of rb532 Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-04 23:27:15 -08:00
Input: add regulator haptic driver This change adds support for haptic driver controlled by voltage of a regulator. Userspace can control the device via Force Feedback interface from input framework. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-17 10:31:08 -08:00
Input: add Retu power button driver. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:50:25 -08:00
Input: add driver for AXP20x Power Enable Key This change adds support for the Power Enable Key found on MFD AXP202 and AXP209. Besides the basic support for the button, the driver adds two entries in sysfs to configure the time delay for power on/off. Signed-off-by: Carlo Caione <carlo@caione.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [wens@csie.org: made axp20x_pek_remove() static; removed driver owner field; fixed path for sysfs entries] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-29 11:20:54 -08:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: sirfsoc_pwrc - add onkey input driver for CSR SiRFprimaII PWRC There is an embedded PWRC(power controller) in SiRFprimaII and SiRFatlasVI, we have an ONKEY button which can generate interrupt to IRQ controller. In a typical user scenarios, at the runtime, if users touch the key, we put system to s2ram status. Signed-off-by: Binghua Duan <Binghua.Duan@csr.com> Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-02 23:38:46 -07:00
Input: add driver for SOC button array This patch adds support for the GPIO buttons on some Intel Bay Trail tablets originally running Windows 8. The ACPI description of these buttons follows "Windows ACPI Design Guide for SoC Platforms". Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30 23:12:00 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add tps65218 power button driver With this driver, we can report KEY_POWER on AM437x SK. This patch has been tested with said board. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-27 20:37:37 -08:00
Input: add twl4030-pwrbutton driver This is part of the twl4030 multifunction device driver that supports reporting KEY_POWER events via the input layer. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-19 23:07:50 -07:00
Input: add driver for TWL4030 vibrator device TWL4030 Vibrator implemented via Force Feedback interface. This uses MFD TWL4030 codec and own dynamic workqueue. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-03-09 00:29:46 -08:00
input: Add initial support for TWL6040 vibrator Add twl6040_vibra as a child of MFD device twl6040_codec. This implementation covers the PCM-to-PWM mode of TWL6040 vibrator module. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Tejun Heo <tj@kernel.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2011-05-01 03:51:24 -05:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
input: Add support for the WM831x ON pin The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-15 12:07:12 +02:00
Input: xen-kbdfront - move to drivers/input/misc drivers/input is reserved for input core code and input handlers with drivers belonging to one of the sub-directories. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16 22:56:03 -07:00
Input: arrange drivers/input/misc/Makefile in alphabetical order Everyone adds their driver to the end of the list, hopefully if it is in alphabetical order new drivers will spread out a bit and I can merge them more easily. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-03-09 20:15:08 -07:00
Input: add driver for slidebar on Lenovo IdeaPad laptops This driver adds support for slidebars found on some Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop Navigator under Windows). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004 Registers 'IdeaPad Slidebar' input device and /sys/devices/platform/ideapad_slidebar/slidebar_mode for switching slidebar's modes. Now works on: IdeaPad Y550, Y550P. May work on (testing and adding new models is needed): Ideapad Y560, Y460, Y450, Y650, and, probably, some others. Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-25 22:51:15 -07:00