kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-24 18:16:04 +00:00
Code Issues Releases Packages Activity
linux/arch/powerpc/Kconfig.debug

257 lines
7.3 KiB
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
[POWERPC] Enable stack debug features on ppc32 Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 00:45:56 -06:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
[POWERPC] Enable stack debug features on ppc32 Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-30 00:45:56 -06:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
[POWERPC] DEBUG_PAGEALLOC for 32-bit Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 15:30:22 +10:00
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-29 23:24:36 +02:00
[POWERPC] DEBUG_PAGEALLOC for 32-bit Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 15:30:22 +10:00
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 16:23:12 -07:00
Fix trivial typos in Kconfig* files Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 07:12:20 +02:00
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-06 16:23:12 -07:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
[POWERPC] Allow xmon to build on legacy iSeries xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-30 11:44:09 +11:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
[POWERPC] print backtrace when entering xmon xmon does not print a backtrace per default. This is bad on systems with USB keyboard, the most needed info about the crash is lost. print a backtrace during the very first xmon entry. Booting with xmon=nobt disables the autobacktrace functionality. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-08 16:29:21 +02:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
[POWERPC] Make xmon disassembly optional While adding spu disassembly support it struck me that we're actually carrying quite a lot of code around, just to do disassembly in the case of a crash. While on large systems it's not an issue, on smaller ones it might be nice to have xmon - but without the weight of the disassembly support. For a Cell build this saves ~230KB (!), and for pSeries ~195KB. We still support the 'di' and 'sdi' commands, however they just dump the instruction in hex. Move the definitions into a header to clean xmon.c just a tiny bit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-11-23 00:46:45 +01:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
[POWERPC] Export virq mapping via debugfs This adds a debugfs file "powerpc/virq_mapping", which shows the virtual to real mapping of irq numbers. Enable it with CONFIG_VIRQ_DEBUG. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Chen Gong <G.Chen@freescale.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-28 18:47:57 +10:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
powerpc: Merge Kconfig.debug This merges in the ppc64 bits into arch/powerpc/Kconfig.debug Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:15:52 +10:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
[POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM BootX text code is only supported on systems with real OF at this point which is PPC_OF && PPC_MULTIPLATFORM. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-26 00:43:36 -05:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:03:51 +10:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:03:51 +10:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[PATCH] powerpc: Make early debugging options behave with oldconfig If you undefine all the early debugging options and then run make oldconfig, you don't get prompted to see if you want to enable any of them. This is annoying. AFAICT we can't do this just with a choice, because the choice is either optional, in which case we don't get prompted, or not in which case we _must_ select early debugging. So add a bool which controls whether we have early debugging at all, and then if that's enabled provide the choice. The extra bool will actually be useful in another patch I have lying around, so this is a win-win. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:03:51 +10:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 18:20:16 +10:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 18:20:16 +10:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-04 16:36:49 -06:00
[POWERPC] Celleb: basic support This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-02 16:47:17 +09:00
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 12:59:31 +10:00
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-16 11:43:43 -05:00
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 11:54:09 +11:00
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 12:59:31 +10:00
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-16 11:43:43 -05:00
[POWERPC] cpm: Describe multi-user ram in its own device node. The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28 14:06:16 -05:00
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-16 11:43:43 -05:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00