linux

mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-09-20 18:15:29 +00:00

74 lines

2 KiB

Raw Normal View History

[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-06-23 00:09:27 -07:00























[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> 2005-11-07 11:27:13 -08:00


[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-06-23 00:09:27 -07:00


[IA64] optimize pagefaults a little Get rid of the notifier list and call the kprobes code directly if compiled in. This mirrors the changes that recently went into powerpc, s390 and sparc64. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com> 2007-05-16 14:52:19 +02:00












[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-06-23 00:09:27 -07:00


[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> 2005-11-07 11:27:13 -08:00












[IA64] Pass more data to the MCA/INIT notify_die hooks The MCA/INIT handlers maintain important state in the SAL to OS (sos) area and in the monarch_cpu flag. Kernel debuggers (such as KDB) need this data, and may need to adjust the monarch_cpu field so make the data available to the notify_die hooks. Define two more events for calling the functions on the notify_die chain. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com> 2006-04-03 15:26:12 +10:00

[IA64] Extend notify_die() hooks for IA64 notify_die() added for MCA_{MONARCH,SLAVE,RENDEZVOUS}_{ENTER,PROCESS,LEAVE} and INIT_{MONARCH,SLAVE}_{ENTER,PROCESS,LEAVE}. We need multiple notification points for these events because they can take many seconds to run which has nasty effects on the behaviour of the rest of the system. DIE_SS replaced by a generic DIE_FAULT which checks the vector number, to allow interception of faults other than SS. DIE_MACHINE_{HALT,RESTART} added to allow last minute close down processing, especially when the halt/restart routines are called from error handlers. DIE_OOPS added. The check for kprobe's break numbers has been moved from traps.c to kprobes.c, allowing DIE_BREAK to be used for any additional break numbers, i.e. it is no longer kprobes specific. Hooks for kernel debuggers and kernel dumpers added, ENTER and LEAVE. Both of these disable the system for long periods which impact on watchdogs and heartbeat systems in general. More patches to come that use these events to reset watchdogs and heartbeats. unregister_die_notifier() added and both routines exported. Requested by Dean Nelson. Lock removed from {un,}register_die_notifier. notifier_chain_register() already takes a lock. Also the generic notifier chain locking is being reworked to distinguish between callbacks that can block and those that cannot, the lock in {un,}register_die_notifier would interfere with that change. http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 Leading white space removed from arch/ia64/kernel/kprobes.c. Typo in mca.c in original version of this patch found & fixed by Dean Nelson. Signed-off-by: Keith Owens <kaos@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Acked-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> 2005-11-07 11:27:13 -08:00









[PATCH] Kprobes/IA64: kdebug die notification mechanism As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Rusty Lynch <Rusty.lynch@intel.com> From: Rusty Lynch <rusty.lynch@intel.com> At the point in traps.c where we recieve a break with a zero value, we can not say if the break was a result of a kprobe or some other debug facility. This simple patch changes the informational string to a more correct "break 0" value, and applies to the 2.6.12-rc2-mm2 tree with all the kprobes patches that were just recently included for the next mm cut. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 2005-06-23 00:09:27 -07:00

74 lines 2 KiB Raw Normal View History

74 lines

2 KiB

Raw Normal View History