linux/drivers/video/fbdev/Kconfig

2242 lines
68 KiB

powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && CONFIG_PPC_PMAC && CONFIG_NVRAM This patch addresses inconsistencies in Mac framebuffer drivers and their use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM. The defined(CONFIG_NVRAM) condition is replaced with the weaker IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi. Macintosh framebuffer drivers use default settings for color mode and video mode that are found in NVRAM. On PCI Macs, MacOS stores display settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs, there is no NR partition and MacOS stores display mode settings in PRAM**. Early-model Macs are the ones most likely to benefit from these settings, since they are more likely to have a fixed-frequency monitor connected to the built-in framebuffer device. Moreover, a single NV_CMODE value and a single NV_VMODE value provide for only one display. The NV_CMODE and NV_VMODE constants are apparently offsets into the NR partition for Old World machines. This also suggests that these defaults are not useful on later models. The NR partition seems to be optional on New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present. It is safe to say that NVRAM support in PowerMac fbdev drivers is only applicable to CONFIG_PPC32 so make this condition explicit. This means matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available there. For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure, since PPC64 does not implement nvram_read_byte(). Also add a missing machine_is(powermac) check. Change the inconsistent dependency on CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC. For valkyriefb, to improve clarity and consistency with the other PowerMac fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a bogus comment regarding PRAM. * See GetPreferredConfiguration and SavePreferredConfiguration in "Designing PCI Cards and Drivers for Power Macintosh Computers". ** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers for the Macintosh Family". Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-15 15:18:56 +11:00
tgafb: clarify dependencies The TGA boards were based on the DECchip 21030 PCI graphics accelerator used mainly for alpha, and existed in a TURBOchannel (TC) version for the DECstation (MIPS) workstations. However, the config option for the TGA code is a bit confused, and says depends on FB && (ALPHA || TC) because people didn't really want to enable the option for random PCI environments, so the "ALPHA" stands in for that case (while the TC case is then the MIPS DECstation case). So that config dependency is kind of a mixture of architecture and bus choices. But it's incorrect, in that there were non-PCI-based alpha hardware, and then the driver just causes warnings: drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function] 1532 | static void tgafb_unregister(struct device *dev) | ^~~~~~~~~~~~~~~~ drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function] 1387 | static int tgafb_register(struct device *dev) | ^~~~~~~~~~~~~~ so let's make the config option dependencies a bit more explict: depends on FB depends on PCI || TC depends on ALPHA || TC where that first "FB" is the software configuration dependency, the second "PCI || TC" is the hardware bus dependency, while that final "ALPHA || TC" dependency is the "don't bother asking except for these situations. We could make that third case have "COMPILE_TEST" as an option, and mark the register/unregister functions as __maybe_unused, but I'm not sure it's really worth it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-18 11:15:01 -07:00
fbdev: simplefb: fix Kconfig dependencies Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Acked-by: Rob Herring <robh@kernel.org> # for drivers/of/ Link: https://lore.kernel.org/all/20210721151839.2484245-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support Cc: Maxime Ripard <maxime@cerno.tech> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Borislav Petkov <bp@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Peter Collingbourne <pcc@google.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210928145243.1098064-1-arnd@kernel.org Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-09-28 16:52:10 +02:00