linux/fs/xattr.c

1196 lines
29 KiB

2012-02-07 18:52:57 -08:00
vfs: Don't modify inodes with a uid or gid unknown to the vfs When a filesystem outside of init_user_ns is mounted it could have uids and gids stored in it that do not map to init_user_ns. The plan is to allow those filesystems to set i_uid to INVALID_UID and i_gid to INVALID_GID for unmapped uids and gids and then to handle that strange case in the vfs to ensure there is consistent robust handling of the weirdness. Upon a careful review of the vfs and filesystems about the only case where there is any possibility of confusion or trouble is when the inode is written back to disk. In that case filesystems typically read the inode->i_uid and inode->i_gid and write them to disk even when just an inode timestamp is being updated. Which leads to a rule that is very simple to implement and understand inodes whose i_uid or i_gid is not valid may not be written. In dealing with access times this means treat those inodes as if the inode flag S_NOATIME was set. Reads of the inodes appear safe and useful, but any write or modification is disallowed. The only inode write that is allowed is a chown that sets the uid and gid on the inode to valid values. After such a chown the inode is normal and may be treated as such. Denying all writes to inodes with uids or gids unknown to the vfs also prevents several oddball cases where corruption would have occurred because the vfs does not have complete information. One problem case that is prevented is attempting to use the gid of a directory for new inodes where the directories sgid bit is set but the directories gid is not mapped. Another problem case avoided is attempting to update the evm hash after setxattr, removexattr, and setattr. As the evm hash includeds the inode->i_uid or inode->i_gid not knowning the uid or gid prevents a correct evm hash from being computed. evm hash verification also fails when i_uid or i_gid is unknown but that is essentially harmless as it does not cause filesystem corruption. Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-29 14:54:46 -05:00
vfs: Don't modify inodes with a uid or gid unknown to the vfs When a filesystem outside of init_user_ns is mounted it could have uids and gids stored in it that do not map to init_user_ns. The plan is to allow those filesystems to set i_uid to INVALID_UID and i_gid to INVALID_GID for unmapped uids and gids and then to handle that strange case in the vfs to ensure there is consistent robust handling of the weirdness. Upon a careful review of the vfs and filesystems about the only case where there is any possibility of confusion or trouble is when the inode is written back to disk. In that case filesystems typically read the inode->i_uid and inode->i_gid and write them to disk even when just an inode timestamp is being updated. Which leads to a rule that is very simple to implement and understand inodes whose i_uid or i_gid is not valid may not be written. In dealing with access times this means treat those inodes as if the inode flag S_NOATIME was set. Reads of the inodes appear safe and useful, but any write or modification is disallowed. The only inode write that is allowed is a chown that sets the uid and gid on the inode to valid values. After such a chown the inode is normal and may be treated as such. Denying all writes to inodes with uids or gids unknown to the vfs also prevents several oddball cases where corruption would have occurred because the vfs does not have complete information. One problem case that is prevented is attempting to use the gid of a directory for new inodes where the directories sgid bit is set but the directories gid is not mapped. Another problem case avoided is attempting to update the evm hash after setxattr, removexattr, and setattr. As the evm hash includeds the inode->i_uid or inode->i_gid not knowning the uid or gid prevents a correct evm hash from being computed. evm hash verification also fails when i_uid or i_gid is unknown but that is essentially harmless as it does not cause filesystem corruption. Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-29 14:54:46 -05:00
acl: handle idmapped mounts The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:27 +01:00
Cache xattr security drop check for write v2 Some recent benchmarking on btrfs showed that a major scaling bottleneck on large systems on btrfs is currently the xattr lookup on every write. Why xattr lookup on every write I hear you ask? write wants to drop suid and security related xattrs that could set o capabilities for executables. To do that it currently looks up security.capability on EVERY write (even for non executables) to decide whether to drop it or not. In btrfs this causes an additional tree walk, hitting some per file system locks and quite bad scalability. In a simple read workload on a 8S system I saw over 90% CPU time in spinlocks related to that. Chris Mason tells me this is also a problem in ext4, where it hits the global mbcache lock. This patch adds a simple per inode to avoid this problem. We only do the lookup once per file and then if there is no xattr cache the decision. All xattr changes clear the flag. I also used the same flag to avoid the suid check, although that one is pretty cheap. A file system can also set this flag when it creates the inode, if it has a cheap way to do so. This is done for some common file systems in followon patches. With this patch a major part of the lock contention disappears for btrfs. Some testing on smaller systems didn't show significant performance changes, but at least it helps the larger systems and is generally more efficient. v2: Rename is_sgid. add file system helper. Cc: chris.mason@oracle.com Cc: josef@redhat.com Cc: viro@zeniv.linux.org.uk Cc: agruen@linbit.com Cc: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-28 08:25:51 -07:00
Cache xattr security drop check for write v2 Some recent benchmarking on btrfs showed that a major scaling bottleneck on large systems on btrfs is currently the xattr lookup on every write. Why xattr lookup on every write I hear you ask? write wants to drop suid and security related xattrs that could set o capabilities for executables. To do that it currently looks up security.capability on EVERY write (even for non executables) to decide whether to drop it or not. In btrfs this causes an additional tree walk, hitting some per file system locks and quite bad scalability. In a simple read workload on a 8S system I saw over 90% CPU time in spinlocks related to that. Chris Mason tells me this is also a problem in ext4, where it hits the global mbcache lock. This patch adds a simple per inode to avoid this problem. We only do the lookup once per file and then if there is no xattr cache the decision. All xattr changes clear the flag. I also used the same flag to avoid the suid check, although that one is pretty cheap. A file system can also set this flag when it creates the inode, if it has a cheap way to do so. This is done for some common file systems in followon patches. With this patch a major part of the lock contention disappears for btrfs. Some testing on smaller systems didn't show significant performance changes, but at least it helps the larger systems and is generally more efficient. v2: Rename is_sgid. add file system helper. Cc: chris.mason@oracle.com Cc: josef@redhat.com Cc: viro@zeniv.linux.org.uk Cc: agruen@linbit.com Cc: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-05-28 08:25:51 -07:00
fs/xattr.c: fix kernel-doc warnings for setxattr & removexattr Fix kernel-doc warnings in fs/xattr.c: ../fs/xattr.c:251: warning: Function parameter or member 'dentry' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'name' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'value' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'size' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'flags' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'delegated_inode' not described in '__vfs_setxattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'dentry' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'name' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'delegated_inode' not described in '__vfs_removexattr_locked' Fixes: 08b5d5014a27 ("xattr: break delegations in {set,remove}xattr") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Frank van der Linden <fllinden@amazon.com> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/7a3dd5a2-5787-adf3-d525-c203f9910ec4@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 16:48:27 -07:00
fs/xattr.c: fix kernel-doc warnings for setxattr & removexattr Fix kernel-doc warnings in fs/xattr.c: ../fs/xattr.c:251: warning: Function parameter or member 'dentry' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'name' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'value' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'size' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'flags' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'delegated_inode' not described in '__vfs_setxattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'dentry' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'name' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'delegated_inode' not described in '__vfs_removexattr_locked' Fixes: 08b5d5014a27 ("xattr: break delegations in {set,remove}xattr") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Frank van der Linden <fllinden@amazon.com> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/7a3dd5a2-5787-adf3-d525-c203f9910ec4@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 16:48:27 -07:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
fs/xattr.c: fix kernel-doc warnings for setxattr & removexattr Fix kernel-doc warnings in fs/xattr.c: ../fs/xattr.c:251: warning: Function parameter or member 'dentry' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'name' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'value' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'size' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'flags' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'delegated_inode' not described in '__vfs_setxattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'dentry' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'name' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'delegated_inode' not described in '__vfs_removexattr_locked' Fixes: 08b5d5014a27 ("xattr: break delegations in {set,remove}xattr") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Frank van der Linden <fllinden@amazon.com> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/7a3dd5a2-5787-adf3-d525-c203f9910ec4@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 16:48:27 -07:00
fs/xattr.c: fix kernel-doc warnings for setxattr & removexattr Fix kernel-doc warnings in fs/xattr.c: ../fs/xattr.c:251: warning: Function parameter or member 'dentry' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'name' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'value' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'size' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'flags' not described in '__vfs_setxattr_locked' ../fs/xattr.c:251: warning: Function parameter or member 'delegated_inode' not described in '__vfs_setxattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'dentry' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'name' not described in '__vfs_removexattr_locked' ../fs/xattr.c:458: warning: Function parameter or member 'delegated_inode' not described in '__vfs_removexattr_locked' Fixes: 08b5d5014a27 ("xattr: break delegations in {set,remove}xattr") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Frank van der Linden <fllinden@amazon.com> Cc: Chuck Lever <chuck.lever@oracle.com> Link: http://lkml.kernel.org/r/7a3dd5a2-5787-adf3-d525-c203f9910ec4@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13 16:48:27 -07:00
commoncap: handle idmapped mounts When interacting with user namespace and non-user namespace aware filesystem capabilities the vfs will perform various security checks to determine whether or not the filesystem capabilities can be used by the caller, whether they need to be removed and so on. The main infrastructure for this resides in the capability codepaths but they are called through the LSM security infrastructure even though they are not technically an LSM or optional. This extends the existing security hooks security_inode_removexattr(), security_inode_killpriv(), security_inode_getsecurity() to pass down the mount's user namespace and makes them aware of idmapped mounts. In order to actually get filesystem capabilities from disk the capability infrastructure exposes the get_vfs_caps_from_disk() helper. For user namespace aware filesystem capabilities a root uid is stored alongside the capabilities. In order to determine whether the caller can make use of the filesystem capability or whether it needs to be ignored it is translated according to the superblock's user namespace. If it can be translated to uid 0 according to that id mapping the caller can use the filesystem capabilities stored on disk. If we are accessing the inode that holds the filesystem capabilities through an idmapped mount we map the root uid according to the mount's user namespace. Afterwards the checks are identical to non-idmapped mounts: reading filesystem caps from disk enforces that the root uid associated with the filesystem capability must have a mapping in the superblock's user namespace and that the caller is either in the same user namespace or is a descendant of the superblock's user namespace. For filesystems that are mountable inside user namespace the caller can just mount the filesystem and won't usually need to idmap it. If they do want to idmap it they can create an idmapped mount and mark it with a user namespace they created and which is thus a descendant of s_user_ns. For filesystems that are not mountable inside user namespaces the descendant rule is trivially true because the s_user_ns will be the initial user namespace. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 14:19:29 +01:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 15:57:27 -07:00
2012-02-07 18:52:57 -08:00
acl: move idmapped mount fixup into vfs_{g,s}etxattr() This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-06 18:30:59 +02:00
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 15:57:27 -07:00