kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-31 05:15:34 +00:00
Code Issues Releases Packages Activity
linux/drivers/net/netdevsim/netdev.c

623 lines
14 KiB
Raw Normal View History

netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add switch_id attribute Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:19 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: make debug dirs' dentries static The root directories of netdevsim should only be used by the core to create per-device subdirectories, so limit their visibility to the core file. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26 14:25:26 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: declare struct device_type as static struct device_type nsim_dev_type created for SR-IOV support should be static. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19 12:10:42 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add switch_id attribute Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:19 -07:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add switch_id attribute Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:19 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: correctly check return value of debugfs_create_dir - Checking return value with IS_ERROR_OR_NULL - Added error handling where it was not handled Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20 12:18:57 +09:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add switch_id attribute Grouping netdevsim devices into "ASICs" will soon be supported. Add switch_id attribute to all netdevsims. For now each netdevsim will have its switch_id matching the device id. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:19 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: Change nsim_devlink_setup to return error to caller Change nsim_devlink_setup to return any error back to the caller and update nsim_init to handle it. Requested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 09:28:51 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: Change nsim_devlink_setup to return error to caller Change nsim_devlink_setup to return any error back to the caller and update nsim_init to handle it. Requested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30 09:28:51 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add ipsec offload testing Implement the IPsec/XFRM offload API for testing. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26 10:07:54 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add support for simultaneous driver and hw XDP Allow netdevsim to accept driver and offload attachment of XDP BPF programs at the same time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-11 20:36:42 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
net: sched: pass extack pointer to block binds and cb registration Pass the extact struct from a tc qdisc add to the block bind function and, in turn, to the setup_tc ndo of binding device via the tc_block_offload struct. Pass this back to any block callback registrations to allow netlink logging of fails in the bind process. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-25 14:30:04 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: correctly check return value of debugfs_create_dir - Checking return value with IS_ERROR_OR_NULL - Added error handling where it was not handled Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20 12:18:57 +09:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27 18:22:00 -07:00
netdevsim: add SR-IOV functionality dummy driver was extended with VF-related netdev APIs for testing SR-IOV-related software. netdevsim did not exist back then. Implement SR-IOV functionality in netdevsim. Notable difference is that since netdevsim has no module parameters, we will actually create a device with sriov_numvfs attribute for each netdev. The zero MAC address is accepted as some HW use it to mean any address is allowed. Link state is also now validated. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:09:01 -08:00
netdevsim: add shared netdevsim devices Factor out sharable netdevsim sub-object and use IFLA_LINK to link netdevsims together at creation time. Sharable object will have its own DebugFS directory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-17 10:53:20 -07:00
netdevsim: add bpf offload support Add support for loading programs for netdevsim devices and expose the related information via DebugFS. Both offload of XDP and cls_bpf programs is supported. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:59 -08:00
netdevsim: add software driver for testing offloads To be able to run selftests without any hardware required we need a software model. The model can also serve as an example implementation for those implementing actual HW offloads. The dummy driver have previously been extended to test SR-IOV, but the general consensus seems to be against adding further features to it. Add a new driver for purposes of software modelling only. eBPF and SR-IOV will be added here shortly, others are invited to further extend the driver with their offload models. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01 15:08:58 -08:00