linux/arch/arm/include/asm/pgtable-2level.h

247 lines
8.5 KiB

arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-11 17:52:58 +01:00
ARM: 7954/1: mm: remove remaining domain support from ARMv6 CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-07 19:12:27 +01:00
mm: consolidate pte_index() and pte_offset_*() definitions All architectures define pte_index() as (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1) and all architectures define pte_offset_kernel() as an entry in the array of PTEs indexed by the pte_index(). For the most architectures the pte_offset_kernel() implementation relies on the availability of pmd_page_vaddr() that converts a PMD entry value to the virtual address of the page containing PTEs array. Let's move x86 definitions of the PTE accessors to the generic place in <linux/pgtable.h> and then simply drop the respective definitions from the other architectures. The architectures that didn't provide pmd_page_vaddr() are updated to have that defined. The generic implementation of pte_offset_kernel() can be overridden by an architecture and alpha makes use of this because it has special ordering requirements for its version of pte_offset_kernel(). [rppt@linux.ibm.com: v2] Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org [rppt@linux.ibm.com: update] Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org [akpm@linux-foundation.org: fix x86 warning] [sfr@canb.auug.org.au: fix powerpc build] Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 21:33:10 -07:00
mm/arm: use macros to define pmd/pud helpers It's already confusing that ARM 2-level v.s. 3-level defines SECT bit differently on pmd/puds. Always use a macro which is much clearer. Link: https://lkml.kernel.org/r/20240318200404.448346-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Salter <msalter@redhat.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-18 16:03:56 -04:00
ARM: 7858/1: mm: make UACCESS_WITH_MEMCPY huge page aware The memory pinning code in uaccess_with_memcpy.c does not check for HugeTLB or THP pmds, and will enter an infinite loop should a __copy_to_user or __clear_user occur against a huge page. This patch adds detection code for huge pages to pin_page_for_write. As this code can be executed in a fast path it refers to the actual pmds rather than the vma. If a HugeTLB or THP is found (they have the same pmd representation on ARM), the page table spinlock is taken to prevent modification whilst the page is pinned. On ARM, huge pages are only represented as pmds, thus no huge pud checks are performed. (For huge puds one would lock the page table in a similar manner as in the pmd case). Two helper functions are introduced; pmd_thp_or_huge will check whether or not a page is huge or transparent huge (which have the same pmd layout on ARM), and pmd_hugewillfault will detect whether or not a page fault will occur on write to the page. Running the following test (with the chunking from read_zero removed): $ dd if=/dev/zero of=/dev/null bs=10M count=1024 Gave: 2.3 GB/s backed by normal pages, 2.9 GB/s backed by huge pages, 5.1 GB/s backed by huge pages, with page mask=HPAGE_MASK. After some discussion, it was decided not to adopt the HPAGE_MASK, as this would have a significant detrimental effect on the overall system latency due to page_table_lock being held for too long. This could be revisited if split huge page locks are adopted. Signed-off-by: Steve Capper <steve.capper@linaro.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-14 09:49:10 +01:00