linux/arch/arm64/include/asm/sysreg.h

1271 lines
48 KiB

arm64: kasan: mte: use a constant kernel GCR_EL1 value When KASAN_HW_TAGS is selected, KASAN is enabled at boot time, and the hardware supports MTE, we'll initialize `kernel_gcr_excl` with a value dependent on KASAN_TAG_MAX. While the resulting value is a constant which depends on KASAN_TAG_MAX, we have to perform some runtime work to generate the value, and have to read the value from memory during the exception entry path. It would be better if we could generate this as a constant at compile-time, and use it as such directly. Early in boot within __cpu_setup(), we initialize GCR_EL1 to a safe value, and later override this with the value required by KASAN. If CONFIG_KASAN_HW_TAGS is not selected, or if KASAN is disabeld at boot time, the kernel will not use IRG instructions, and so the initial value of GCR_EL1 is does not matter to the kernel. Thus, we can instead have __cpu_setup() initialize GCR_EL1 to a value consistent with KASAN_TAG_MAX, and avoid the need to re-initialize it during hotplug and resume form suspend. This patch makes arem64 use a compile-time constant KERNEL_GCR_EL1 value, which is compatible with KASAN_HW_TAGS when this is selected. This removes the need to re-initialize GCR_EL1 dynamically, and acts as an optimization to the entry assembly, which no longer needs to load this value from memory. The redundant initialization hooks are removed. In order to do this, KASAN_TAG_MAX needs to be visible outside of the core KASAN code. To do this, I've moved the KASAN_TAG_* values into <linux/kasan-tags.h>. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20210714143843.56537-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-07-14 15:38:42 +01:00
arm64: Delete the space separator in __emit_inst In assembly, many instances of __emit_inst(x) expand to a directive. In a few places __emit_inst(x) is used as an assembler macro argument. For example, in arch/arm64/kvm/hyp/entry.S ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) expands to the following by the C preprocessor: alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 Both comma and space are separators, with an exception that content inside a pair of parentheses/quotes is not split, so the clang integrated assembler splits the arguments to: nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1 GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend (along with many other non-x86 backends) sees: alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # .inst(...) is parsed as one argument while its x86 backend sees: alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1 # The extra space before '(' makes the whole .inst (...) parsed as two arguments The non-x86 backend's behavior is considered unintentional (https://sourceware.org/bugzilla/show_bug.cgi?id=25750). So drop the space separator inside `.inst (...)` to make the clang integrated assembler work. Suggested-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/939 Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-14 09:32:55 -07:00
arm64: Enable data independent timing (DIT) in the kernel The ARM architecture revision v8.4 introduces a data independent timing control (DIT) which can be set at any exception level, and instructs the CPU to avoid optimizations that may result in a correlation between the execution time of certain instructions and the value of the data they operate on. The DIT bit is part of PSTATE, and is therefore context switched as usual, given that it becomes part of the saved program state (SPSR) when taking an exception. We have also defined a hwcap for DIT, and so user space can discover already whether or nor DIT is available. This means that, as far as user space is concerned, DIT is wired up and fully functional. In the kernel, however, we never bothered with DIT: we disable at it boot (i.e., INIT_PSTATE_EL1 has DIT cleared) and ignore the fact that we might run with DIT enabled if user space happened to set it. Currently, we have no idea whether or not running privileged code with DIT disabled on a CPU that implements support for it may result in a side channel that exposes privileged data to unprivileged user space processes, so let's be cautious and just enable DIT while running in the kernel if supported by all CPUs. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Kees Cook <keescook@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Adam Langley <agl@google.com> Link: https://lore.kernel.org/all/YwgCrqutxmX0W72r@gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20221107172400.1851434-1-ardb@kernel.org [will: Removed cpu_has_dit() as per Mark's suggestion on the list] Signed-off-by: Will Deacon <will@kernel.org>
2022-11-07 18:24:00 +01:00
arm64: Enable data independent timing (DIT) in the kernel The ARM architecture revision v8.4 introduces a data independent timing control (DIT) which can be set at any exception level, and instructs the CPU to avoid optimizations that may result in a correlation between the execution time of certain instructions and the value of the data they operate on. The DIT bit is part of PSTATE, and is therefore context switched as usual, given that it becomes part of the saved program state (SPSR) when taking an exception. We have also defined a hwcap for DIT, and so user space can discover already whether or nor DIT is available. This means that, as far as user space is concerned, DIT is wired up and fully functional. In the kernel, however, we never bothered with DIT: we disable at it boot (i.e., INIT_PSTATE_EL1 has DIT cleared) and ignore the fact that we might run with DIT enabled if user space happened to set it. Currently, we have no idea whether or not running privileged code with DIT disabled on a CPU that implements support for it may result in a side channel that exposes privileged data to unprivileged user space processes, so let's be cautious and just enable DIT while running in the kernel if supported by all CPUs. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Kees Cook <keescook@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Adam Langley <agl@google.com> Link: https://lore.kernel.org/all/YwgCrqutxmX0W72r@gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20221107172400.1851434-1-ardb@kernel.org [will: Removed cpu_has_dit() as per Mark's suggestion on the list] Signed-off-by: Will Deacon <will@kernel.org>
2022-11-07 18:24:00 +01:00
arm64: Enable data independent timing (DIT) in the kernel The ARM architecture revision v8.4 introduces a data independent timing control (DIT) which can be set at any exception level, and instructs the CPU to avoid optimizations that may result in a correlation between the execution time of certain instructions and the value of the data they operate on. The DIT bit is part of PSTATE, and is therefore context switched as usual, given that it becomes part of the saved program state (SPSR) when taking an exception. We have also defined a hwcap for DIT, and so user space can discover already whether or nor DIT is available. This means that, as far as user space is concerned, DIT is wired up and fully functional. In the kernel, however, we never bothered with DIT: we disable at it boot (i.e., INIT_PSTATE_EL1 has DIT cleared) and ignore the fact that we might run with DIT enabled if user space happened to set it. Currently, we have no idea whether or not running privileged code with DIT disabled on a CPU that implements support for it may result in a side channel that exposes privileged data to unprivileged user space processes, so let's be cautious and just enable DIT while running in the kernel if supported by all CPUs. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Kees Cook <keescook@chromium.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Adam Langley <agl@google.com> Link: https://lore.kernel.org/all/YwgCrqutxmX0W72r@gmail.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20221107172400.1851434-1-ardb@kernel.org [will: Removed cpu_has_dit() as per Mark's suggestion on the list] Signed-off-by: Will Deacon <will@kernel.org>
2022-11-07 18:24:00 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64/sve: System register context switch and access support This patch adds the necessary support for context switching ZCR_EL1 for each vcpu. ZCR_EL1 is trapped alongside the FPSIMD/SVE registers, so it makes sense for it to be handled as part of the guest FPSIMD/SVE context for context switch purposes instead of handling it as a general system register. This means that it can be switched in lazily at the appropriate time. No effort is made to track host context for this register, since SVE requires VHE: thus the hosts's value for this register lives permanently in ZCR_EL2 and does not alias the guest's value at any time. The Hyp switch and fpsimd context handling code is extended appropriately. Accessors are added in sys_regs.c to expose the SVE system registers and ID register fields. Because these need to be conditionally visible based on the guest configuration, they are implemented separately for now rather than by use of the generic system register helpers. This may be abstracted better later on when/if there are more features requiring this model. ID_AA64ZFR0_EL1 is RO-RAZ for MRS/MSR when SVE is disabled for the guest, but for compatibility with non-SVE aware KVM implementations the register should not be enumerated at all for KVM_GET_REG_LIST in this case. For consistency we also reject ioctl access to the register. This ensures that a non-SVE-enabled guest looks the same to userspace, irrespective of whether the kernel KVM implementation supports SVE. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-28 14:39:16 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s Currently, the {read,write}_sysreg_el*() accessors for accessing particular ELs' sysregs in the presence of VHE rely on some local hacks and define their system register encodings in a way that is inconsistent with the core definitions in <asm/sysreg.h>. As a result, it is necessary to add duplicate definitions for any system register that already needs a definition in sysreg.h for other reasons. This is a bit of a maintenance headache, and the reasons for the _el*() accessors working the way they do is a bit historical. This patch gets rid of the shadow sysreg definitions in <asm/kvm_hyp.h>, converts the _el*() accessors to use the core __msr_s/__mrs_s interface, and converts all call sites to use the standard sysreg #define names (i.e., upper case, with SYS_ prefix). This patch will conflict heavily anyway, so the opportunity to clean up some bad whitespace in the context of the changes is taken. The change exposes a few system registers that have no sysreg.h definition, due to msr_s/mrs_s being used in place of msr/mrs: additions are made in order to fill in the gaps. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://www.spinics.net/lists/kvm-arm/msg31717.html [Rebased to v4.21-rc1] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [Rebased to v5.2-rc5, changelog updates] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-06 11:29:40 +01:00
KVM: arm64/sve: System register context switch and access support This patch adds the necessary support for context switching ZCR_EL1 for each vcpu. ZCR_EL1 is trapped alongside the FPSIMD/SVE registers, so it makes sense for it to be handled as part of the guest FPSIMD/SVE context for context switch purposes instead of handling it as a general system register. This means that it can be switched in lazily at the appropriate time. No effort is made to track host context for this register, since SVE requires VHE: thus the hosts's value for this register lives permanently in ZCR_EL2 and does not alias the guest's value at any time. The Hyp switch and fpsimd context handling code is extended appropriately. Accessors are added in sys_regs.c to expose the SVE system registers and ID register fields. Because these need to be conditionally visible based on the guest configuration, they are implemented separately for now rather than by use of the generic system register helpers. This may be abstracted better later on when/if there are more features requiring this model. ID_AA64ZFR0_EL1 is RO-RAZ for MRS/MSR when SVE is disabled for the guest, but for compatibility with non-SVE aware KVM implementations the register should not be enumerated at all for KVM_GET_REG_LIST in this case. For consistency we also reject ioctl access to the register. This ensures that a non-SVE-enabled guest looks the same to userspace, irrespective of whether the kernel KVM implementation supports SVE. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-28 14:39:16 +01:00
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) This change introduces a prctl that allows the user program to control which PAC keys are enabled in a particular task. The main reason why this is useful is to enable a userspace ABI that uses PAC to sign and authenticate function pointers and other pointers exposed outside of the function, while still allowing binaries conforming to the ABI to interoperate with legacy binaries that do not sign or authenticate pointers. The idea is that a dynamic loader or early startup code would issue this prctl very early after establishing that a process may load legacy binaries, but before executing any PAC instructions. This change adds a small amount of overhead to kernel entry and exit due to additional required instruction sequences. On a DragonBoard 845c (Cortex-A75) with the powersave governor, the overhead of similar instruction sequences was measured as 4.9ns when simulating the common case where IA is left enabled, or 43.7ns when simulating the uncommon case where IA is disabled. These numbers can be seen as the worst case scenario, since in more realistic scenarios a better performing governor would be used and a newer chip would be used that would support PAC unlike Cortex-A75 and would be expected to be faster than Cortex-A75. On an Apple M1 under a hypervisor, the overhead of the entry/exit instruction sequences introduced by this patch was measured as 0.3ns in the case where IA is left enabled, and 33.0ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5 Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-18 20:10:53 -07:00
KVM: arm64: Make EL2 exception entry and exit context-synchronization events SCTLR_EL2.EIS and SCTLR_EL2.EOS control whether exception entry and exit at EL2 are Context Synchronisation Events (CSEs). Per ARM DDI 0487 M.b D24.2.175 (p. D24-9754): - !FEAT_ExS: the bit is RES1, so the entry/exit is unconditionally a CSE. - FEAT_ExS: the reset value is architecturally UNKNOWN; software must set the bit to make the entry/exit a CSE. INIT_SCTLR_EL2_MMU_ON in arch/arm64/include/asm/sysreg.h sets neither bit. KVM/arm64 hot paths rely on ERET from EL2 being a CSE, and on synchronous EL1->EL2 entry being a CSE, to elide explicit ISBs after MSRs to context-switching system registers (HCR_EL2, ZCR_EL2, ptrauth keys, etc.). On FEAT_ExS hardware those reliances are not architecturally backed unless EOS=1 (and, for entry, EIS=1). Until commit 0a35bd285f43 ("arm64: Convert SCTLR_EL2 to sysreg infrastructure"), SCTLR_EL2_RES1 was a hand-rolled mask that included BIT(11) (EOS) and BIT(22) (EIS), so INIT_SCTLR_EL2_MMU_ON was setting both unconditionally. The conversion made SCTLR_EL2_RES1 auto-generated; because the sysreg tooling only models unconditionally-RES1 fields and EIS/EOS are RES1 only when FEAT_ExS is absent, the auto-generated mask is UL(0). The seven other bits dropped from the old mask (positions 4, 5, 16, 18, 23, 28, 29) are unconditionally RES1 in the E2H=0 SCTLR_EL2 layout per DDI 0487 M.b D24.2.175, so dropping them is harmless. EIS and EOS are the only bits whose semantics changed for FEAT_ExS hardware and where the kernel relies on the value being 1. Make the guarantee explicit: include SCTLR_ELx_EIS | SCTLR_ELx_EOS in INIT_SCTLR_EL2_MMU_ON so that EL2 exception entry and exit are unconditionally CSEs regardless of whether FEAT_ExS is implemented. This matches the pairing in arch/arm64/kvm/config.c which treats EIS and EOS together as RES1 under !FEAT_ExS. Fixes: 0a35bd285f43 ("arm64: Convert SCTLR_EL2 to sysreg infrastructure") Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com> Assisted-by: Gemini:gemini-3.1-pro review-prompts Signed-off-by: Fuad Tabba <tabba@google.com> Link: https://patch.msgid.link/20260501112149.2824881-2-tabba@google.com Signed-off-by: Marc Zyngier <maz@kernel.org>
2026-05-01 12:21:44 +01:00
arm64: kasan: mte: use a constant kernel GCR_EL1 value When KASAN_HW_TAGS is selected, KASAN is enabled at boot time, and the hardware supports MTE, we'll initialize `kernel_gcr_excl` with a value dependent on KASAN_TAG_MAX. While the resulting value is a constant which depends on KASAN_TAG_MAX, we have to perform some runtime work to generate the value, and have to read the value from memory during the exception entry path. It would be better if we could generate this as a constant at compile-time, and use it as such directly. Early in boot within __cpu_setup(), we initialize GCR_EL1 to a safe value, and later override this with the value required by KASAN. If CONFIG_KASAN_HW_TAGS is not selected, or if KASAN is disabeld at boot time, the kernel will not use IRG instructions, and so the initial value of GCR_EL1 is does not matter to the kernel. Thus, we can instead have __cpu_setup() initialize GCR_EL1 to a value consistent with KASAN_TAG_MAX, and avoid the need to re-initialize it during hotplug and resume form suspend. This patch makes arem64 use a compile-time constant KERNEL_GCR_EL1 value, which is compatible with KASAN_HW_TAGS when this is selected. This removes the need to re-initialize GCR_EL1 dynamically, and acts as an optimization to the entry assembly, which no longer needs to load this value from memory. The redundant initialization hooks are removed. In order to do this, KASAN_TAG_MAX needs to be visible outside of the core KASAN code. To do this, I've moved the KASAN_TAG_* values into <linux/kasan-tags.h>. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20210714143843.56537-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-07-14 15:38:42 +01:00
2025-07-03 12:25:10 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
2025-07-03 12:25:10 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
irqchip/gic-v5: Add GICv5 LPI/IPI support An IRS supports Logical Peripheral Interrupts (LPIs) and implement Linux IPIs on top of it. LPIs are used for interrupt signals that are translated by a GICv5 ITS (Interrupt Translation Service) but also for software generated IRQs - namely interrupts that are not driven by a HW signal, ie IPIs. LPIs rely on memory storage for interrupt routing and state. LPIs state and routing information is kept in the Interrupt State Table (IST). IRSes provide support for 1- or 2-level IST tables configured to support a maximum number of interrupts that depend on the OS configuration and the HW capabilities. On systems that provide 2-level IST support, always allow the maximum number of LPIs; On systems with only 1-level support, limit the number of LPIs to 2^12 to prevent wasting memory (presumably a system that supports a 1-level only IST is not expecting a large number of interrupts). On a 2-level IST system, L2 entries are allocated on demand. The IST table memory is allocated using the kmalloc() interface; the allocation required may be smaller than a page and must be made up of contiguous physical pages if larger than a page. On systems where the IRS is not cache-coherent with the CPUs, cache mainteinance operations are executed to clean and invalidate the allocated memory to the point of coherency making it visible to the IRS components. On GICv5 systems, IPIs are implemented using LPIs. Add an LPI IRQ domain and implement an IPI-specific IRQ domain created as a child/subdomain of the LPI domain to allocate the required number of LPIs needed to implement the IPIs. IPIs are backed by LPIs, add LPIs allocation/de-allocation functions. The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs. Associate an IPI irqchip with IPI IRQ descriptors to provide core code with the irqchip.ipi_send_single() method required to raise an IPI. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:12 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
2025-07-03 12:25:10 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
2025-07-03 12:25:10 +02:00
2025-07-03 12:25:10 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
2025-07-03 12:25:10 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
irqchip/gic-v5: Add GICv5 LPI/IPI support An IRS supports Logical Peripheral Interrupts (LPIs) and implement Linux IPIs on top of it. LPIs are used for interrupt signals that are translated by a GICv5 ITS (Interrupt Translation Service) but also for software generated IRQs - namely interrupts that are not driven by a HW signal, ie IPIs. LPIs rely on memory storage for interrupt routing and state. LPIs state and routing information is kept in the Interrupt State Table (IST). IRSes provide support for 1- or 2-level IST tables configured to support a maximum number of interrupts that depend on the OS configuration and the HW capabilities. On systems that provide 2-level IST support, always allow the maximum number of LPIs; On systems with only 1-level support, limit the number of LPIs to 2^12 to prevent wasting memory (presumably a system that supports a 1-level only IST is not expecting a large number of interrupts). On a 2-level IST system, L2 entries are allocated on demand. The IST table memory is allocated using the kmalloc() interface; the allocation required may be smaller than a page and must be made up of contiguous physical pages if larger than a page. On systems where the IRS is not cache-coherent with the CPUs, cache mainteinance operations are executed to clean and invalidate the allocated memory to the point of coherency making it visible to the IRS components. On GICv5 systems, IPIs are implemented using LPIs. Add an LPI IRQ domain and implement an IPI-specific IRQ domain created as a child/subdomain of the LPI domain to allocate the required number of LPIs needed to implement the IPIs. IPIs are backed by LPIs, add LPIs allocation/de-allocation functions. The LPI INTID namespace is managed using an IDA to alloc/free LPI INTIDs. Associate an IPI irqchip with IPI IRQ descriptors to provide core code with the irqchip.ipi_send_single() method required to raise an IPI. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-22-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:12 +02:00
irqchip/gic-v5: Add GICv5 IRS/SPI support The GICv5 Interrupt Routing Service (IRS) component implements interrupt management and routing in the GICv5 architecture. A GICv5 system comprises one or more IRSes, that together handle the interrupt routing and state for the system. An IRS supports Shared Peripheral Interrupts (SPIs), that are interrupt sources directly connected to the IRS; they do not rely on memory for storage. The number of supported SPIs is fixed for a given implementation and can be probed through IRS IDR registers. SPI interrupt state and routing are managed through GICv5 instructions. Each core (PE in GICv5 terms) in a GICv5 system is identified with an Interrupt AFFinity ID (IAFFID). An IRS manages a set of cores that are connected to it. Firmware provides a topology description that the driver uses to detect to which IRS a CPU (ie an IAFFID) is associated with. Use probeable information and firmware description to initialize the IRSes and implement GICv5 IRS SPIs support through an SPI-specific IRQ domain. The GICv5 IRS driver: - Probes IRSes in the system to detect SPI ranges - Associates an IRS with a set of cores connected to it - Adds an IRQchip structure for SPI handling SPIs priority is set to a value corresponding to the lowest permissible priority in the system (taking into account the implemented priority bits of the IRS and CPU interface). Since all IRQs are set to the same priority value, the value itself does not matter as long as it is a valid one. Co-developed-by: Sascha Bischoff <sascha.bischoff@arm.com> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com> Co-developed-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Marc Zyngier <maz@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20250703-gicv5-host-v7-21-12e71f1b3528@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-07-03 12:25:11 +02:00
2025-07-03 12:25:10 +02:00
2025-07-03 12:25:10 +02:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64: sysreg: Make mrs_s and msr_s macros work with Clang and LTO Clang's integrated assembler does not allow assembly macros defined in one inline asm block using the .macro directive to be used across separate asm blocks. LLVM developers consider this a feature and not a bug, recommending code refactoring: https://bugs.llvm.org/show_bug.cgi?id=19749 As binutils doesn't allow macros to be redefined, this change uses UNDEFINE_MRS_S and UNDEFINE_MSR_S to define corresponding macros in-place and workaround gcc and clang limitations on redefining macros across different assembler blocks. Specifically, the current state after preprocessing looks like this: asm volatile(".macro mXX_s ... .endm"); void f() { asm volatile("mXX_s a, b"); } With GCC, it gives macro redefinition error because sysreg.h is included in multiple source files, and assembler code for all of them is later combined for LTO (I've seen an intermediate file with hundreds of identical definitions). With clang, it gives macro undefined error because clang doesn't allow sharing macros between inline asm statements. I also seem to remember catching another sort of undefined error with GCC due to reordering of macro definition asm statement and generated asm code for function that uses the macro. The solution with defining and undefining for each use, while certainly not elegant, satisfies both GCC and clang, LTO and non-LTO. Co-developed-by: Alex Matveev <alxmtvv@gmail.com> Co-developed-by: Yury Norov <ynorov@caviumnetworks.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-24 09:55:37 -07:00
arm64/sysreg: Fix GIC CDEOI instruction encoding The GIC CDEOI system instruction requires the Rt field to be set to 0b11111 otherwise the instruction behaviour becomes CONSTRAINED UNPREDICTABLE. Currenly, its usage is encoded as a system register write, with a constant 0 value: write_sysreg_s(0, GICV5_OP_GIC_CDEOI) While compiling with GCC, the 0 constant value, through these asm constraints and modifiers ('x' modifier and 'Z' constraint combo): asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); forces the compiler to issue the XZR register for the MSR operation (ie that corresponds to Rt == 0b11111) issuing the right instruction encoding. Unfortunately LLVM does not yet understand that modifier/constraint combo so it ends up issuing a different register from XZR for the MSR source, which in turns means that it encodes the GIC CDEOI instruction wrongly and the instruction behaviour becomes CONSTRAINED UNPREDICTABLE that we must prevent. Add a conditional to write_sysreg_s() macro that detects whether it is passed a constant 0 value and issues an MSR write with XZR as source register - explicitly doing what the asm modifier/constraint is meant to achieve through constraints/modifiers, fixing the LLVM compilation issue. Fixes: 7ec80fb3f025 ("irqchip/gic-v5: Add GICv5 PPI support") Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Sascha Bischoff <sascha.bischoff@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-10-07 12:26:00 +02:00
arm64/sysreg: Fix GIC CDEOI instruction encoding The GIC CDEOI system instruction requires the Rt field to be set to 0b11111 otherwise the instruction behaviour becomes CONSTRAINED UNPREDICTABLE. Currenly, its usage is encoded as a system register write, with a constant 0 value: write_sysreg_s(0, GICV5_OP_GIC_CDEOI) While compiling with GCC, the 0 constant value, through these asm constraints and modifiers ('x' modifier and 'Z' constraint combo): asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); forces the compiler to issue the XZR register for the MSR operation (ie that corresponds to Rt == 0b11111) issuing the right instruction encoding. Unfortunately LLVM does not yet understand that modifier/constraint combo so it ends up issuing a different register from XZR for the MSR source, which in turns means that it encodes the GIC CDEOI instruction wrongly and the instruction behaviour becomes CONSTRAINED UNPREDICTABLE that we must prevent. Add a conditional to write_sysreg_s() macro that detects whether it is passed a constant 0 value and issues an MSR write with XZR as source register - explicitly doing what the asm modifier/constraint is meant to achieve through constraints/modifiers, fixing the LLVM compilation issue. Fixes: 7ec80fb3f025 ("irqchip/gic-v5: Add GICv5 PPI support") Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Cc: Sascha Bischoff <sascha.bischoff@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2025-10-07 12:26:00 +02:00