linux/arch/s390/Kconfig

1037 lines
28 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
s390: Add stackprotector support Stackprotector support was previously unavailable on s390 because by default compilers generate code which is not suitable for the kernel: the canary value is accessed via thread local storage, where the address of thread local storage is within access registers 0 and 1. Using those registers also for the kernel would come with a significant performance impact and more complicated kernel entry/exit code, since access registers contents would have to be exchanged on every kernel entry and exit. With the upcoming gcc 16 release new compiler options will become available which allow to generate code suitable for the kernel. [1] Compiler option -mstack-protector-guard=global instructs gcc to generate stackprotector code that refers to a global stackprotector canary value via symbol __stack_chk_guard. Access to this value is guaranteed to occur via larl and lgrl instructions. Furthermore, compiler option -mstack-protector-guard-record generates a section containing all code addresses that reference the canary value. To allow for per task canary values the instructions which load the address of __stack_chk_guard are patched so they access a lowcore field instead: a per task canary value is available within the task_struct of each task, and is written to the per-cpu lowcore location on each context switch. Also add sanity checks and debugging option to be consistent with other kernel code patching mechanisms. Full debugging output can be enabled with the following kernel command line options: debug_stackprotector bootdebug ignore_loglevel earlyprintk dyndbg="file stackprotector.c +p" Example debug output: stackprot: 0000021e402d4eda: c010005a9ae3 -> c01f00070240 where "<insn address>: <old insn> -> <new insn>". [1] gcc commit 0cd1f03939d5 ("s390: Support global stack protector") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-11-17 15:09:53 +01:00
2022-02-15 17:55:04 +01:00
mm: generalize ARCH_ENABLE_MEMORY_[HOTPLUG|HOTREMOVE] ARCH_ENABLE_MEMORY_[HOTPLUG|HOTREMOVE] configs have duplicate definitions on platforms that subscribe them. Instead, just make them generic options which can be selected on applicable platforms. Link: https://lkml.kernel.org/r/1617259448-22529-4-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Heiko Carstens <hca@linux.ibm.com> [s390] Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-04 18:38:17 -07:00
s390/mm: Enable THP_SWAP and THP_MIGRATION After hugetlbfs PTE_MARKER support for s390 introduced region-third and segment table swap entries, it is now possible to also enable THP_SWAP and THP_MIGRATION for s390. s390 has different layout for PTE and region / segment table entries (RSTE). This is also true for swap entries, and their swap type and offset encoding. For hugetlbfs PTE_MARKER support, s390 has internal __swp_type_rste() and __swp_offset_rste() helpers to correctly handle RSTE swap entries. But common swap code does not know about this difference, and only uses __swp_type(), __swp_offset() and __swp_entry() helpers for conversion between arch-dependent and arch-independent representation of swp_entry_t for all pagetable levels. On s390, those helpers only work for PTE swap entries. Therefore, implement __pmd_to_swp_entry() to build a fake PTE swap entry and return the arch-dependent representation of that. Correspondingly, implement __swp_entry_to_pmd() to convert that into a proper PMD swap entry again. With this, the arch-dependent swp_entry_t representation will always look like a PTE swap entry in common code. This is somewhat similar to fake PTEs in hugetlbfs code for s390, but only requires conversion of the swap type and offset, and not all the possible PTE bits. For PMD swap entry SOFT_DIRTY handling, use the same helpers as for normal PMDs. Similar to PTEs, the SOFT_DIRTY bit location is the same for swap and normal entries. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-07-29 13:16:19 +02:00
usercopy: Check valid lifetime via stack depth One of the things that CONFIG_HARDENED_USERCOPY sanity-checks is whether an object that is about to be copied to/from userspace is overlapping the stack at all. If it is, it performs a number of inexpensive bounds checks. One of the finer-grained checks is whether an object crosses stack frames within the stack region. Doing this on x86 with CONFIG_FRAME_POINTER was cheap/easy. Doing it with ORC was deemed too heavy, and was left out (a while ago), leaving the courser whole-stack check. The LKDTM tests USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM try to exercise these cross-frame cases to validate the defense is working. They have been failing ever since ORC was added (which was expected). While Muhammad was investigating various LKDTM failures[1], he asked me for additional details on them, and I realized that when exact stack frame boundary checking is not available (i.e. everything except x86 with FRAME_POINTER), it could check if a stack object is at least "current depth valid", in the sense that any object within the stack region but not between start-of-stack and current_stack_pointer should be considered unavailable (i.e. its lifetime is from a call no longer present on the stack). Introduce ARCH_HAS_CURRENT_STACK_POINTER to track which architectures have actually implemented the common global register alias. Additionally report usercopy bounds checking failures with an offset from current_stack_pointer, which may assist with diagnosing failures. The LKDTM USERCOPY_STACK_FRAME_TO and USERCOPY_STACK_FRAME_FROM tests (once slightly adjusted in a separate patch) pass again with this fixed. [1] https://github.com/kernelci/kernelci-project/issues/84 Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Kees Cook <keescook@chromium.org> --- v1: https://lore.kernel.org/lkml/20220216201449.2087956-1-keescook@chromium.org v2: https://lore.kernel.org/lkml/20220224060342.1855457-1-keescook@chromium.org v3: https://lore.kernel.org/lkml/20220225173345.3358109-1-keescook@chromium.org v4: - improve commit log (akpm)
2022-02-16 12:05:28 -08:00
mm/debug: add tests validating architecture page table helpers This adds tests which will validate architecture page table helpers and other accessors in their compliance with expected generic MM semantics. This will help various architectures in validating changes to existing page table helpers or addition of new ones. This test covers basic page table entry transformations including but not limited to old, young, dirty, clean, write, write protect etc at various level along with populating intermediate entries with next page table page and validating them. Test page table pages are allocated from system memory with required size and alignments. The mapped pfns at page table levels are derived from a real pfn representing a valid kernel text symbol. This test gets called via late_initcall(). This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected. Any architecture, which is willing to subscribe this test will need to select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64, x86, s390 and powerpc platforms where the test is known to build and run successfully Going forward, other architectures too can subscribe the test after fixing any build or runtime problems with their page table helpers. Folks interested in making sure that a given platform's page table helpers conform to expected generic MM semantics should enable the above config which will just trigger this test during boot. Any non conformity here will be reported as an warning which would need to be fixed. This test will help catch any changes to the agreed upon semantics expected from generic MM and enable platforms to accommodate it thereafter. [anshuman.khandual@arm.com: v17] Link: http://lkml.kernel.org/r/1587436495-22033-3-git-send-email-anshuman.khandual@arm.com [anshuman.khandual@arm.com: v18] Link: http://lkml.kernel.org/r/1588564865-31160-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> [ppc32] Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/1583919272-24178-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 16:47:15 -07:00
mm: expose arch_mmap_rnd when available When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 15:48:00 -07:00
mm: introduce ARCH_HAS_PTE_SPECIAL Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07 17:06:08 -07:00
2019-01-16 14:15:22 +01:00
arch, mm: restore dependency of __kernel_map_pages() on DEBUG_PAGEALLOC The design of DEBUG_PAGEALLOC presumes that __kernel_map_pages() must never fail. With this assumption is wouldn't be safe to allow general usage of this function. Moreover, some architectures that implement __kernel_map_pages() have this function guarded by #ifdef DEBUG_PAGEALLOC and some refuse to map/unmap pages when page allocation debugging is disabled at runtime. As all the users of __kernel_map_pages() were converted to use debug_pagealloc_map_pages() it is safe to make it available only when DEBUG_PAGEALLOC is set. Link: https://lkml.kernel.org/r/20201109192128.960-4-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Len Brown <len.brown@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-14 19:10:30 -08:00
s390/pgtable: Add s390 support for page table check Add page table check hooks into routines that modify user page tables. Unlike other architectures s390 does not have means to distinguish between kernel and user page table entries. Rely on the fact the page table check infrastructure itself operates on non-init_mm memory spaces only. Use the provided mm_struct to verify that the memory space is not init_mm (aka not the kernel memory space) indeed. That check is supposed to be succeeded already (on some code paths even twice). If the passed memory space by contrast is init_mm that would be an unexpected semantical change in generic code, so do VM_BUG_ON() in such case. Unset _SEGMENT_ENTRY_READ bit to indicate that pmdp_invalidate() was applied against a huge PMD and is going to be updated by set_pmd_at() shortly. The hook pmd_user_accessible_page() should skip such entries until that, otherwise the page table accounting falls apart and BUG_ON() gets hit as result. The invalidated huge PMD entry should not be confused with a PROT_NONE entry as reported by pmd_protnone(), though the entry characteristics exactly match: _SEGMENT_ENTRY_LARGE is set while _SEGMENT_ENTRY_READ is unset. Since pmd_protnone() implementation depends on NUMA_BALANCING configuration option, it should not be used in pmd_user_accessible_page() check, which is expected to be CONFIG_NUMA_BALANCING-agnostic. Nevertheless, an invalidated huge PMD is technically still pmd_protnone() entry and it should not break other code paths once _SEGMENT_ENTRY_READ is unset. As of now, all pmd_protnone() checks are done under page table locks or exercise GUP-fast and HMM code paths, which are expected to be safe against concurrent page table updates. Alternative approach would be using the last remaining unused PMD entry bit 0x800 to indicate that pmdp_invalidate() was called on a PMD. That would allow avoiding collisions with pmd_protnone() handling code paths, but saving the bit is more preferable way to go. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Co-developed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/4db8a681205bd555298d62441cdcfca43317a35a.1772812343.git.agordeev@linux.ibm.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2026-03-06 17:16:32 +01:00
mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma() The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(), create a new arch config HAS_HUGE_PAGE that can be used to tell if pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the compiler would not be able to find pmd_mkwrite_novma(). No functional change. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/ Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
2023-06-12 17:10:27 -07:00
s390/mm: Enable THP_SWAP and THP_MIGRATION After hugetlbfs PTE_MARKER support for s390 introduced region-third and segment table swap entries, it is now possible to also enable THP_SWAP and THP_MIGRATION for s390. s390 has different layout for PTE and region / segment table entries (RSTE). This is also true for swap entries, and their swap type and offset encoding. For hugetlbfs PTE_MARKER support, s390 has internal __swp_type_rste() and __swp_offset_rste() helpers to correctly handle RSTE swap entries. But common swap code does not know about this difference, and only uses __swp_type(), __swp_offset() and __swp_entry() helpers for conversion between arch-dependent and arch-independent representation of swp_entry_t for all pagetable levels. On s390, those helpers only work for PTE swap entries. Therefore, implement __pmd_to_swp_entry() to build a fake PTE swap entry and return the arch-dependent representation of that. Correspondingly, implement __swp_entry_to_pmd() to convert that into a proper PMD swap entry again. With this, the arch-dependent swp_entry_t representation will always look like a PTE swap entry in common code. This is somewhat similar to fake PTEs in hugetlbfs code for s390, but only requires conversion of the swap type and offset, and not all the possible PTE bits. For PMD swap entry SOFT_DIRTY handling, use the same helpers as for normal PMDs. Similar to PTEs, the SOFT_DIRTY bit location is the same for swap and normal entries. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-07-29 13:16:19 +02:00
s390: convert to generic entry This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-21 11:14:56 +01:00
s390: mm: convert to GENERIC_IOREMAP By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(), generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and iounmap() are all visible and available to arch. Arch needs to provide wrapper functions to override the generic versions if there's arch specific handling in its ioremap_prot(), ioremap() or iounmap(). This change will simplify implementation by removing duplicated code with generic_ioremap_prot() and generic_iounmap(), and has the equivalent functioality as before. Here, add wrapper functions ioremap_prot() and iounmap() for s390's special operation when ioremap() and iounmap(). And also replace including <asm-generic/io.h> with <asm/io.h> in arch/s390/kernel/perf_cpum_sf.c, otherwise building error will be seen because macro defined in <asm/io.h> can't be seen in perf_cpum_sf.c. Link: https://lkml.kernel.org/r/20230706154520.11257-11-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Rich Felker <dalias@libc.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-06 23:45:11 +08:00
s390/kasan: add initialization code and enable it Kasan needs 1/8 of kernel virtual address space to be reserved as the shadow area. And eventually it requires the shadow memory offset to be known at compile time (passed to the compiler when full instrumentation is enabled). Any value picked as the shadow area offset for 3-level paging would eat up identity mapping on 4-level paging (with 1PB shadow area size). So, the kernel sticks to 3-level paging when kasan is enabled. 3TB border is picked as the shadow offset. The memory layout is adjusted so, that physical memory border does not exceed KASAN_SHADOW_START and vmemmap does not go below KASAN_SHADOW_END. Due to the fact that on s390 paging is set up very late and to cover more code with kasan instrumentation, temporary identity mapping and final shadow memory are set up early. The shadow memory mapping is later carried over to init_mm.pgd during paging_init. For the needs of paging structures allocation and shadow memory population a primitive allocator is used, which simply chops off memory blocks from the end of the physical memory. Kasan currenty doesn't track vmemmap and vmalloc areas. Current memory layout (for 3-level paging, 2GB physical memory). ---[ Identity Mapping ]--- 0x0000000000000000-0x0000000000100000 ---[ Kernel Image Start ]--- 0x0000000000100000-0x0000000002b00000 ---[ Kernel Image End ]--- 0x0000000002b00000-0x0000000080000000 2G <- physical memory border 0x0000000080000000-0x0000030000000000 3070G PUD I ---[ Kasan Shadow Start ]--- 0x0000030000000000-0x0000030010000000 256M PMD RW X <- shadow for 2G memory 0x0000030010000000-0x0000037ff0000000 523776M PTE RO NX <- kasan zero ro page 0x0000037ff0000000-0x0000038000000000 256M PMD RW X <- shadow for 2G modules ---[ Kasan Shadow End ]--- 0x0000038000000000-0x000003d100000000 324G PUD I ---[ vmemmap Area ]--- 0x000003d100000000-0x000003e080000000 ---[ vmalloc Area ]--- 0x000003e080000000-0x000003ff80000000 ---[ Modules Area ]--- 0x000003ff80000000-0x0000040000000000 2G Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-17 14:29:13 +01:00
fprobe: Use ftrace_regs in fprobe exit handler Change the fprobe exit handler to use ftrace_regs structure instead of pt_regs. This also introduce HAVE_FTRACE_REGS_HAVING_PT_REGS which means the ftrace_regs is including the pt_regs so that ftrace_regs can provide pt_regs without memory allocation. Fprobe introduces a new dependency with that. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: bpf <bpf@vger.kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Song Liu <song@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: KP Singh <kpsingh@kernel.org> Cc: Matt Bobrowski <mattbobrowski@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: Yonghong Song <yonghong.song@linux.dev> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Stanislav Fomichev <sdf@fomichev.me> Cc: Hao Luo <haoluo@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/173518995092.391279.6765116450352977627.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-26 14:12:31 +09:00
fgraph: Replace fgraph_ret_regs with ftrace_regs Use ftrace_regs instead of fgraph_ret_regs for tracing return value on function_graph tracer because of simplifying the callback interface. The CONFIG_HAVE_FUNCTION_GRAPH_RETVAL is also replaced by CONFIG_HAVE_FUNCTION_GRAPH_FREGS. Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Will Deacon <will@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Florent Revest <revest@chromium.org> Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: bpf <bpf@vger.kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/173518991508.391279.16635322774382197642.stgit@devnote2 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-12-26 14:11:55 +09:00
2012-09-28 14:31:03 +09:30
s390/livepatch: Implement reliable stack tracing for the consistency model The livepatch consistency model requires reliable stack tracing architecture support in order to work properly. In order to achieve this, two main issues have to be solved. First, reliable and consistent call chain backtracing has to be ensured. Second, the unwinder needs to be able to detect stack corruptions and return errors. The "zSeries ELF Application Binary Interface Supplement" says: "The stack pointer points to the first word of the lowest allocated stack frame. If the "back chain" is implemented this word will point to the previously allocated stack frame (towards higher addresses), except for the first stack frame, which shall have a back chain of zero (NULL). The stack shall grow downwards, in other words towards lower addresses." "back chain" is optional. GCC option -mbackchain enables it. Quoting Martin Schwidefsky [1]: "The compiler is called with the -mbackchain option, all normal C function will store the backchain in the function prologue. All functions written in assembler code should do the same, if you find one that does not we should fix that. The end result is that a task that *voluntarily* called schedule() should have a proper backchain at all times. Dependent on the use case this may or may not be enough. Asynchronous interrupts may stop the CPU at the beginning of a function, if kernel preemption is enabled we can end up with a broken backchain. The production kernels for IBM Z are all compiled *without* kernel preemption. So yes, we might get away without the objtool support. On a side-note, we do have a line item to implement the ORC unwinder for the kernel, that includes the objtool support. Once we have that we can drop the -mbackchain option for the kernel build. That gives us a nice little performance benefit. I hope that the change from backchain to the ORC unwinder will not be too hard to implement in the livepatch tools." Since -mbackchain is enabled by default when the kernel is compiled, the call chain backtracing should be currently ensured and objtool should not be necessary for livepatch purposes. Regarding the second issue, stack corruptions and non-reliable states have to be recognized by the unwinder. Mainly it means to detect preemption or page faults, the end of the task stack must be reached, return addresses must be valid text addresses and hacks like function graph tracing and kretprobes must be properly detected. Unwinding a running task's stack is not a problem, because there is a livepatch requirement that every checked task is blocked, except for the current task. Due to that, the implementation can be much simpler compared to the existing non-reliable infrastructure. We can consider a task's kernel/thread stack only and skip the other stacks. [1] 20180912121106.31ffa97c@mschwideX1 [not archived on lore.kernel.org] Link: https://lkml.kernel.org/r/20191106095601.29986-5-mbenes@suse.cz Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-06 10:56:01 +01:00
s390: Add stackprotector support Stackprotector support was previously unavailable on s390 because by default compilers generate code which is not suitable for the kernel: the canary value is accessed via thread local storage, where the address of thread local storage is within access registers 0 and 1. Using those registers also for the kernel would come with a significant performance impact and more complicated kernel entry/exit code, since access registers contents would have to be exchanged on every kernel entry and exit. With the upcoming gcc 16 release new compiler options will become available which allow to generate code suitable for the kernel. [1] Compiler option -mstack-protector-guard=global instructs gcc to generate stackprotector code that refers to a global stackprotector canary value via symbol __stack_chk_guard. Access to this value is guaranteed to occur via larl and lgrl instructions. Furthermore, compiler option -mstack-protector-guard-record generates a section containing all code addresses that reference the canary value. To allow for per task canary values the instructions which load the address of __stack_chk_guard are patched so they access a lowcore field instead: a per task canary value is available within the task_struct of each task, and is written to the per-cpu lowcore location on each context switch. Also add sanity checks and debugging option to be consistent with other kernel code patching mechanisms. Full debugging output can be enabled with the following kernel command line options: debug_stackprotector bootdebug ignore_loglevel earlyprintk dyndbg="file stackprotector.c +p" Example debug output: stackprot: 0000021e402d4eda: c010005a9ae3 -> c01f00070240 where "<insn address>: <old insn> -> <new insn>". [1] gcc commit 0cd1f03939d5 ("s390: Support global stack protector") Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-11-17 15:09:53 +01:00
s390/pci: Migrate s390 IRQ logic to IRQ domain API s390 is one of the last architectures using the legacy API for setup and teardown of PCI MSI IRQs. Migrate the s390 IRQ allocation and teardown to the MSI parent domain API. For details, see: https://lore.kernel.org/lkml/20221111120501.026511281@linutronix.de In detail, create an MSI parent domain for each PCI domain. When a PCI device sets up MSI or MSI-X IRQs, the library creates a per-device IRQ domain for this device, which is used by the device for allocating and freeing IRQs. The per-device domain delegates this allocation and freeing to the parent-domain. In the end, the corresponding callbacks of the parent domain are responsible for allocating and freeing the IRQs. The allocation is split into two parts: - zpci_msi_prepare() is called once for each device and allocates the required resources. On s390, each PCI function has its own airq vector and a summary bit, which must be configured once per function. This is done in prepare(). - zpci_msi_alloc() can be called multiple times for allocating one or more MSI/MSI-X IRQs. This creates a mapping between the virtual IRQ number in the kernel and the hardware IRQ number. Freeing is split into two counterparts: - zpci_msi_free() reverts the effects of zpci_msi_alloc() and - zpci_msi_teardown() reverts the effects of zpci_msi_prepare(). This is called once when all IRQs are freed before a device is removed. Since the parent domain in the end allocates the IRQs, the hwirq encoding must be unambiguous for all IRQs of all devices. This is achieved by encoding the hwirq using the devfn and the MSI index. Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Tobias Schumacher <ts@linux.ibm.com> Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2025-12-04 06:05:02 +01:00
2012-09-28 14:31:03 +09:30
s390/pci: Support mmap() of PCI resources except for ISM devices So far s390 does not allow mmap() of PCI resources to user-space via the usual mechanisms, though it does use it for RDMA. For the PCI sysfs resource files and /proc/bus/pci it defines neither HAVE_PCI_MMAP nor ARCH_GENERIC_PCI_MMAP_RESOURCE. For vfio-pci s390 previously relied on disabled VFIO_PCI_MMAP and now relies on setting pdev->non_mappable_bars for all devices. This is partly because access to mapped PCI resources from user-space requires special PCI load/store memory-I/O (MIO) instructions, or the special MMIO syscalls when these are not available. Still, such access is possible and useful not just for RDMA, in fact not being able to mmap() PCI resources has previously caused extra work when testing devices. One thing that doesn't work with PCI resources mapped to user-space though is the s390 specific virtual ISM device. Not only because the BAR size of 256 TiB prevents mapping the whole BAR but also because access requires use of the legacy PCI instructions which are not accessible to user-space on systems with the newer MIO PCI instructions. Now with the pdev->non_mappable_bars flag ISM can be excluded from mapping its resources while making this functionality available for all other PCI devices. To this end introduce a minimal implementation of PCI_QUIRKS and use that to set pdev->non_mappable_bars for ISM devices only. Then also set ARCH_GENERIC_PCI_MMAP_RESOURCE to take advantage of the generic implementation of pci_mmap_resource_range() enabling only the newer sysfs mmap() interface. This follows the recommendation in Documentation/PCI/sysfs-pci.rst. Link: https://lore.kernel.org/r/20250226-vfio_pci_mmap-v7-3-c5c0f1d26efd@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-02-26 13:07:47 +01:00
kexec: fix KEXEC_FILE dependencies The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call"). [arnd@arndb.de: fix riscv build] Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-23 13:01:54 +02:00
kexec: fix KEXEC_FILE dependencies The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the 'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which causes a link failure when all the crypto support is in a loadable module and kexec_file support is built-in: x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load': (.text+0x32e30a): undefined reference to `crypto_alloc_shash' x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update' x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final' Both s390 and x86 have this problem, while ppc64 and riscv have the correct dependency already. On riscv, the dependency is only used for the purgatory, not for the kexec_file code itself, which may be a bit surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable KEXEC_FILE but then the purgatory code is silently left out. Move this into the common Kconfig.kexec file in a way that is correct everywhere, using the dependency on CRYPTO_SHA256=y only when the purgatory code is available. This requires reversing the dependency between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect remains the same, other than making riscv behave like the other ones. On s390, there is an additional dependency on CRYPTO_SHA256_S390, which should technically not be required but gives better performance. Remove this dependency here, noting that it was not present in the initial Kconfig code but was brought in without an explanation in commit 71406883fd357 ("s390/kexec_file: Add kexec_file_load system call"). [arnd@arndb.de: fix riscv build] Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org Fixes: 6af5138083005 ("x86/kexec: refactor for kernel/Kconfig.kexec") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com> Tested-by: Eric DeVolder <eric_devolder@yahoo.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Conor Dooley <conor@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-23 13:01:54 +02:00
- An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options"). - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h"). - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands"). - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions"). - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug"). - Many singleton patches to various parts of the tree -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy QHy7lL0Syha38kKLMXTM+bN6YQHi9AU= =WJQa -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ...
2023-08-29 14:53:51 -07:00
- An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options"). - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h"). - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands"). - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions"). - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug"). - Many singleton patches to various parts of the tree -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy QHy7lL0Syha38kKLMXTM+bN6YQHi9AU= =WJQa -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - An extensive rework of kexec and crash Kconfig from Eric DeVolder ("refactor Kconfig to consolidate KEXEC and CRASH options") - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a couple of macros to args.h") - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper commands") - vsprintf inclusion rationalization from Andy Shevchenko ("lib/vsprintf: Rework header inclusions") - Switch the handling of kdump from a udev scheme to in-kernel handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory hot un/plug") - Many singleton patches to various parts of the tree * tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits) document while_each_thread(), change first_tid() to use for_each_thread() drivers/char/mem.c: shrink character device's devlist[] array x86/crash: optimize CPU changes crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() crash: hotplug support for kexec_load() x86/crash: add x86 crash hotplug support crash: memory and CPU hotplug sysfs attributes kexec: exclude elfcorehdr from the segment digest crash: add generic infrastructure for crash hotplug support crash: move a few code bits to setup support of crash hotplug kstrtox: consistently use _tolower() kill do_each_thread() nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse scripts/bloat-o-meter: count weak symbol sizes treewide: drop CONFIG_EMBEDDED lockdep: fix static memory detection even more lib/vsprintf: declare no_hash_pointers in sprintf.h lib/vsprintf: split out sprintf() and friends kernel/fork: stop playing lockless games for exe_file replacement adfs: delete unused "union adfs_dirtail" definition ...
2023-08-29 14:53:51 -07:00
s390: add support for user-defined certificates Enable receiving the user-defined certificates from the s390x hypervisor via new diagnose 0x320 calls, and make them available to the Linux root user as 'cert_store_key' type keys in a so-called 'cert_store' keyring. New user-space interfaces: /sys/firmware/cert_store/refresh Writing to this attribute re-fetches certificates via DIAG 0x320 /sys/firmware/cert_store/cs_status Reading from this attribute returns either of: "uninitialized" If no certificate has been retrieved yet "ok" If certificates have been successfully retrieved "failed (<number>)" If certificate retrieval failed with reason code <number> New debug trace areas: /sys/kernel/debug/s390dbf/cert_store_msg /sys/kernel/debug/s390dbf/cert_store_hexdump Usage example: To initiate request for certificates available to the system as root: $ echo 1 > /sys/firmware/cert_store/refresh Upon success the '/sys/firmware/cert_store/cs_status' contains the value 'ok'. $ cat /sys/firmware/cert_store/cs_status ok Get the ID of the keyring 'cert_store': $ keyctl search @us keyring cert_store OR $ keyctl link @us @s; keyctl request keyring cert_store Obtain list of IDs of certificates: $ keyctl rlist <cert_store keyring ID> Display certificate content as hex-dump: $ keyctl read <certificate ID> Read certificate contents as binary data: $ keyctl pipe <certificate ID> >cert_data Display certificate description: $ keyctl describe <certificate ID> The certificate description has the following format: <64 bytes certificate name in EBCDIC> ':' <certificate index as obtained from hypervisor> ':' <certificate store token obtained from hypervisor> The certificate description in /proc/keys has certificate name represented in ASCII. Users can read but cannot update the content of the certificate. Signed-off-by: Anastasia Eskova <anastasia.eskova@ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-04-28 06:42:42 -04:00
s390: add support for user-defined certificates Enable receiving the user-defined certificates from the s390x hypervisor via new diagnose 0x320 calls, and make them available to the Linux root user as 'cert_store_key' type keys in a so-called 'cert_store' keyring. New user-space interfaces: /sys/firmware/cert_store/refresh Writing to this attribute re-fetches certificates via DIAG 0x320 /sys/firmware/cert_store/cs_status Reading from this attribute returns either of: "uninitialized" If no certificate has been retrieved yet "ok" If certificates have been successfully retrieved "failed (<number>)" If certificate retrieval failed with reason code <number> New debug trace areas: /sys/kernel/debug/s390dbf/cert_store_msg /sys/kernel/debug/s390dbf/cert_store_hexdump Usage example: To initiate request for certificates available to the system as root: $ echo 1 > /sys/firmware/cert_store/refresh Upon success the '/sys/firmware/cert_store/cs_status' contains the value 'ok'. $ cat /sys/firmware/cert_store/cs_status ok Get the ID of the keyring 'cert_store': $ keyctl search @us keyring cert_store OR $ keyctl link @us @s; keyctl request keyring cert_store Obtain list of IDs of certificates: $ keyctl rlist <cert_store keyring ID> Display certificate content as hex-dump: $ keyctl read <certificate ID> Read certificate contents as binary data: $ keyctl pipe <certificate ID> >cert_data Display certificate description: $ keyctl describe <certificate ID> The certificate description has the following format: <64 bytes certificate name in EBCDIC> ':' <certificate index as obtained from hypervisor> ':' <certificate store token obtained from hypervisor> The certificate description in /proc/keys has certificate name represented in ASCII. Users can read but cannot update the content of the certificate. Signed-off-by: Anastasia Eskova <anastasia.eskova@ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-04-28 06:42:42 -04:00
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:19 -04:00
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:19 -04:00
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:19 -04:00
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-25 19:16:19 -04:00
[PATCH] s390_hypfs filesystem On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:05:06 -07:00
[PATCH] s390_hypfs filesystem On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:05:06 -07:00
[PATCH] s390_hypfs filesystem On zSeries machines there exists an interface which allows the operating system to retrieve LPAR hypervisor accounting data. For example, it is possible to get usage data for physical and virtual cpus. In order to provide this information to user space programs, I implemented a new virtual Linux file system named 's390_hypfs' using the Linux 2.6 libfs framework. The name 's390_hypfs' stands for 'S390 Hypervisor Filesystem'. All the accounting information is put into different virtual files which can be accessed from user space. All data is represented as ASCII strings. When the file system is mounted the accounting information is retrieved and a file system tree is created with the attribute files containing the cpu information. The content of the files remains unchanged until a new update is made. An update can be triggered from user space through writing 'something' into a special purpose update file. We create the following directory structure: <mount-point>/ update cpus/ <cpu-id> type mgmtime <cpu-id> ... hyp/ type systems/ <lpar-name> cpus/ <cpu-id> type mgmtime cputime onlinetime <cpu-id> ... <lpar-name> cpus/ ... - update: File to trigger update - cpus/: Directory for all physical cpus - cpus/<cpu-id>/: Directory for one physical cpu. - cpus/<cpu-id>/type: Type name of physical zSeries cpu. - cpus/<cpu-id>/mgmtime: Physical-LPAR-management time in microseconds. - hyp/: Directory for hypervisor information - hyp/type: Typ of hypervisor (currently only 'LPAR Hypervisor') - systems/: Directory for all LPARs - systems/<lpar-name>/: Directory for one LPAR. - systems/<lpar-name>/cpus/<cpu-id>/: Directory for the virtual cpus - systems/<lpar-name>/cpus/<cpu-id>/type: Typ of cpu. - systems/<lpar-name>/cpus/<cpu-id>/mgmtime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the hypervisor and was not provided to the LPAR (LPAR overhead). - systems/<lpar-name>/cpus/<cpu-id>/cputime: Accumulated number of microseconds during which a physical CPU was assigned to the logical cpu and the cpu time was consumed by the LPAR. - systems/<lpar-name>/cpus/<cpu-id>/onlinetime: Accumulated number of microseconds during which the logical CPU has been online. As mount point for the filesystem /sys/hypervisor/s390 is created. The update process is triggered when writing 'something' into the 'update' file at the top level hypfs directory. You can do this e.g. with 'echo 1 > update'. During the update the whole directory structure is deleted and built up again. Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ingo Oeser <ioe-lkml@rameria.de> Cc: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 02:05:06 -07:00