linux/arch/x86/include/asm/pgtable.h

1738 lines
42 KiB

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
x86/mm: Provide general kernel support for memory encryption Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:07 -05:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
x86/mm: Insure that boot memory areas are mapped properly The boot data and command line data are present in memory in a decrypted state and are copied early in the boot process. The early page fault support will map these areas as encrypted, so before attempting to copy them, add decrypted mappings so the data is accessed properly when copied. For the initrd, encrypt this data in place. Since the future mapping of the initrd area will be mapped as encrypted the data will be accessed properly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/bb0d430b41efefd45ee515aaf0979dcfda8b6a44.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:11 -05:00
x86/mm: Insure that boot memory areas are mapped properly The boot data and command line data are present in memory in a decrypted state and are copied early in the boot process. The early page fault support will map these areas as encrypted, so before attempting to copy them, add decrypted mappings so the data is accessed properly when copied. For the initrd, encrypt this data in place. Since the future mapping of the initrd area will be mapped as encrypted the data will be accessed properly. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/bb0d430b41efefd45ee515aaf0979dcfda8b6a44.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:11 -05:00
x86: mm+efi: convert ptdump_walk_pgd_level() to take a mm_struct To enable x86 to use the generic walk_page_range() function, the callers of ptdump_walk_pgd_level() need to pass an mm_struct rather than the raw pgd_t pointer. Luckily since commit 7e904a91bf60 ("efi: Use efi_mm in x86 as well as ARM") we now have an mm_struct for EFI on x86. Link: http://lkml.kernel.org/r/20191218162402.45610-18-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03 17:36:11 -08:00
x86: mm: convert ptdump_walk_pgd_level_debugfs() to take an mm_struct To enable x86 to use the generic walk_page_range() function, the callers of ptdump_walk_pgd_level_debugfs() need to pass in the mm_struct. This means that ptdump_walk_pgd_level_core() is now always passed a valid pgd, so drop the support for pgd==NULL. Link: http://lkml.kernel.org/r/20191218162402.45610-19-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03 17:36:16 -08:00
mm: ptdump: have ptdump_check_wx() return bool Have ptdump_check_wx() return true when the check is successful or false otherwise. [akpm@linux-foundation.org: fix a couple of build issues (x86_64 allmodconfig)] Link: https://lkml.kernel.org/r/7943149fe955458cb7b57cd483bf41a3aad94684.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-30 11:34:35 +01:00
arm64, powerpc, riscv, s390, x86: ptdump: refactor CONFIG_DEBUG_WX All architectures using the core ptdump functionality also implement CONFIG_DEBUG_WX, and they all do it more or less the same way, with a function called debug_checkwx() that is called by mark_rodata_ro(), which is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a no-op otherwise. Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call debug_checkwx() immediately after calling mark_rodata_ro() instead of calling it at the end of every mark_rodata_ro(). On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX before calling debug_checkwx(). Now the check is inside the callee ptdump_walk_pgd_level_checkwx(). On powerpc_64, mark_rodata_ro() bails out early before calling ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check is now also done in ptdump_check_wx() as it is called outside mark_rodata_ro(). Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Phong Tran <tranmanphong@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Steven Price <steven.price@arm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-30 11:34:33 +01:00
x86/mm/pti: Move user W+X check into pti_finalize() The user page-table gets the updated kernel mappings in pti_finalize(), which runs after the RO+X permissions got applied to the kernel page-table in mark_readonly(). But with CONFIG_DEBUG_WX enabled, the user page-table is already checked in mark_readonly() for insecure mappings. This causes false-positive warnings, because the user page-table did not get the updated mappings yet. Move the W+X check for the user page-table into pti_finalize() after it updated all required mappings. [ tglx: Folded !NX supported fix ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1533727000-9172-1-git-send-email-joro@8bytes.org
2018-08-08 13:16:40 +02:00
x86/mm: Warn on W^X mappings Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-05 12:55:20 -04:00
x86/mm: Warn on W^X mappings Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-05 12:55:20 -04:00
x86/mm/pti: Move user W+X check into pti_finalize() The user page-table gets the updated kernel mappings in pti_finalize(), which runs after the RO+X permissions got applied to the kernel page-table in mark_readonly(). But with CONFIG_DEBUG_WX enabled, the user page-table is already checked in mark_readonly() for insecure mappings. This causes false-positive warnings, because the user page-table did not get the updated mappings yet. Move the W+X check for the user page-table into pti_finalize() after it updated all required mappings. [ tglx: Folded !NX supported fix ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1533727000-9172-1-git-send-email-joro@8bytes.org
2018-08-08 13:16:40 +02:00
x86/mm: Warn on W^X mappings Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-05 12:55:20 -04:00
x86/mm/pti: Move user W+X check into pti_finalize() The user page-table gets the updated kernel mappings in pti_finalize(), which runs after the RO+X permissions got applied to the kernel page-table in mark_readonly(). But with CONFIG_DEBUG_WX enabled, the user page-table is already checked in mark_readonly() for insecure mappings. This causes false-positive warnings, because the user page-table did not get the updated mappings yet. Move the W+X check for the user page-table into pti_finalize() after it updated all required mappings. [ tglx: Folded !NX supported fix ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: linux-mm@kvack.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Waiman Long <llong@redhat.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca> Cc: joro@8bytes.org Link: https://lkml.kernel.org/r/1533727000-9172-1-git-send-email-joro@8bytes.org
2018-08-08 13:16:40 +02:00
x86/mm: Warn on W^X mappings Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-05 12:55:20 -04:00
x86/mm: Provide general kernel support for memory encryption Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-17 16:10:07 -05:00
mm: introduce generic lazy_mmu helpers The implementation of the lazy MMU mode is currently entirely arch-specific; core code directly calls arch helpers: arch_{enter,leave}_lazy_mmu_mode(). We are about to introduce support for nested lazy MMU sections. As things stand we'd have to duplicate that logic in every arch implementing lazy_mmu - adding to a fair amount of logic already duplicated across lazy_mmu implementations. This patch therefore introduces a new generic layer that calls the existing arch_* helpers. Two pair of calls are introduced: * lazy_mmu_mode_enable() ... lazy_mmu_mode_disable() This is the standard case where the mode is enabled for a given block of code by surrounding it with enable() and disable() calls. * lazy_mmu_mode_pause() ... lazy_mmu_mode_resume() This is for situations where the mode is temporarily disabled by first calling pause() and then resume() (e.g. to prevent any batching from occurring in a critical section). The documentation in <linux/pgtable.h> will be updated in a subsequent patch. No functional change should be introduced at this stage. The implementation of enable()/resume() and disable()/pause() is currently identical, but nesting support will change that. Most of the call sites have been updated using the following Coccinelle script: @@ @@ { ... - arch_enter_lazy_mmu_mode(); + lazy_mmu_mode_enable(); ... - arch_leave_lazy_mmu_mode(); + lazy_mmu_mode_disable(); ... } @@ @@ { ... - arch_leave_lazy_mmu_mode(); + lazy_mmu_mode_pause(); ... - arch_enter_lazy_mmu_mode(); + lazy_mmu_mode_resume(); ... } A couple of notes regarding x86: * Xen is currently the only case where explicit handling is required for lazy MMU when context-switching. This is purely an implementation detail and using the generic lazy_mmu_mode_* functions would cause trouble when nesting support is introduced, because the generic functions must be called from the current task. For that reason we still use arch_leave() and arch_enter() there. * x86 calls arch_flush_lazy_mmu_mode() unconditionally in a few places, but only defines it if PARAVIRT_XXL is selected, and we are removing the fallback in <linux/pgtable.h>. Add a new fallback definition to <asm/pgtable.h> to keep things building. Link: https://lkml.kernel.org/r/20251215150323.2218608-8-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Borislav Betkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand (Red Hat) <david@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Juegren Gross <jgross@suse.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-15 15:03:16 +00:00
mm/x86: support large pfn mappings Helpers to install and detect special pmd/pud entries. In short, bit 9 on x86 is not used for pmd/pud, so we can directly define them the same as the pte level. One note is that it's also used in _PAGE_BIT_CPA_TEST but that is only used in the debug test, and shouldn't conflict in this case. One note is that pxx_set|clear_flags() for pmd/pud will need to be moved upper so that they can be referenced by the new special bit helpers. There's no change in the code that was moved. Link: https://lkml.kernel.org/r/20240826204353.2228736-18-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-26 16:43:51 -04:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/x86: implement arch_check_zapped_pud() Introduce arch_check_zapped_pud() to sanity check shadow stack on PUD zaps. It has the same logic as the PMD helper. One thing to mention is, it might be a good idea to use page_table_check in the future for trapping wrong setups of shadow stack pgtable entries [1]. That is left for the future as a separate effort. [1] https://lore.kernel.org/all/59d518698f664e07c036a5098833d7b56b953305.camel@intel.com Link: https://lkml.kernel.org/r/20240812181225.1360970-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:23 -04:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:13:00 -07:00
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:13:00 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
mm/arch: provide pud_pfn() fallback The comment in the code explains the reasons. We took a different approach comparing to pmd_pfn() by providing a fallback function. Another option is to provide some lower level config options (compare to HUGETLB_PAGE or THP) to identify which layer an arch can support for such huge mappings. However that can be an overkill. [peterx@redhat.com: fix loongson defconfig] Link: https://lkml.kernel.org/r/20240403013249.1418299-4-peterx@redhat.com Link: https://lkml.kernel.org/r/20240327152332.950956-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-27 11:23:24 -04:00
x86/mm: Check if PUD is large when validating a kernel address A user reported the following oops when a backup process reads /proc/kcore: BUG: unable to handle kernel paging request at ffffbb00ff33b000 IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110 [...] Call Trace: [<ffffffff811b8aaa>] read_kcore+0x17a/0x370 [<ffffffff811ad847>] proc_reg_read+0x77/0xc0 [<ffffffff81151687>] vfs_read+0xc7/0x130 [<ffffffff811517f3>] sys_read+0x53/0xa0 [<ffffffff81449692>] system_call_fastpath+0x16/0x1b Investigation determined that the bug triggered when reading system RAM at the 4G mark. On this system, that was the first address using 1G pages for the virt->phys direct mapping so the PUD is pointing to a physical address, not a PMD page. The problem is that the page table walker in kern_addr_valid() is not checking pud_large() and treats the physical address as if it was a PMD. If it happens to look like pmd_none then it'll silently fail, probably returning zeros instead of real data. If the data happens to look like a present PMD though, it will be walked resulting in the oops above. This patch adds the necessary pud_large() check. Unfortunately the problem was not readily reproducible and now they are running the backup program without accessing /proc/kcore so the patch has not been validated but I think it makes sense. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.coM> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-11 14:52:36 +00:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/mm: Check if PUD is large when validating a kernel address A user reported the following oops when a backup process reads /proc/kcore: BUG: unable to handle kernel paging request at ffffbb00ff33b000 IP: [<ffffffff8103157e>] kern_addr_valid+0xbe/0x110 [...] Call Trace: [<ffffffff811b8aaa>] read_kcore+0x17a/0x370 [<ffffffff811ad847>] proc_reg_read+0x77/0xc0 [<ffffffff81151687>] vfs_read+0xc7/0x130 [<ffffffff811517f3>] sys_read+0x53/0xa0 [<ffffffff81449692>] system_call_fastpath+0x16/0x1b Investigation determined that the bug triggered when reading system RAM at the 4G mark. On this system, that was the first address using 1G pages for the virt->phys direct mapping so the PUD is pointing to a physical address, not a PMD page. The problem is that the page table walker in kern_addr_valid() is not checking pud_large() and treats the physical address as if it was a PMD. If it happens to look like pmd_none then it'll silently fail, probably returning zeros instead of real data. If the data happens to look like a present PMD though, it will be walked resulting in the oops above. This patch adds the necessary pud_large() check. Unfortunately the problem was not readily reproducible and now they are running the backup program without accessing /proc/kcore so the patch has not been validated but I think it makes sense. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.coM> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20130211145236.GX21389@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-11 14:52:36 +00:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
arch: fix has_transparent_hugepage() I've just discovered that the useful-sounding has_transparent_hugepage() is actually an architecture-dependent minefield: on some arches it only builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when not, but on some of those (arm and arm64) it then gives the wrong answer; and on mips alone it's marked __init, which would crash if called later (but so far it has not been called later). Straighten this out: make it available to all configs, with a sensible default in asm-generic/pgtable.h, removing its definitions from those arches (arc, arm, arm64, sparc, tile) which are served by the default, adding #define has_transparent_hugepage has_transparent_hugepage to those (mips, powerpc, s390, x86) which need to override the default at runtime, and removing the __init from mips (but maybe that kind of code should be avoided after init: set a static variable the first time it's called). Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Yang Shi <yang.shi@linaro.org> Cc: Ning Qu <quning@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [arch/s390] Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19 17:13:00 -07:00
mm/x86: support large pfn mappings Helpers to install and detect special pmd/pud entries. In short, bit 9 on x86 is not used for pmd/pud, so we can directly define them the same as the pte level. One note is that it's also used in _PAGE_BIT_CPA_TEST but that is only used in the debug test, and shouldn't conflict in this case. One note is that pxx_set|clear_flags() for pmd/pud will need to be moved upper so that they can be referenced by the new special bit helpers. There's no change in the code that was moved. Link: https://lkml.kernel.org/r/20240826204353.2228736-18-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Niklas Schnelle <schnelle@linux.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-26 16:43:51 -04:00
x86/mm: Introduce _PAGE_SAVED_DIRTY Some OSes have a greater dependence on software available bits in PTEs than Linux. That left the hardware architects looking for a way to represent a new memory type (shadow stack) within the existing bits. They chose to repurpose a lightly-used state: Write=0,Dirty=1. So in order to support shadow stack memory, Linux should avoid creating memory with this PTE bit combination unless it intends for it to be shadow stack. The reason it's lightly used is that Dirty=1 is normally set by HW _before_ a write. A write with a Write=0 PTE would typically only generate a fault, not set Dirty=1. Hardware can (rarely) both set Dirty=1 *and* generate the fault, resulting in a Write=0,Dirty=1 PTE. Hardware which supports shadow stacks will no longer exhibit this oddity. So that leaves Write=0,Dirty=1 PTEs created in software. To avoid inadvertently created shadow stack memory, in places where Linux normally creates Write=0,Dirty=1, it can use the software-defined _PAGE_SAVED_DIRTY in place of the hardware _PAGE_DIRTY. In other words, whenever Linux needs to create Write=0,Dirty=1, it instead creates Write=0,SavedDirty=1 except for shadow stack, which is Write=0,Dirty=1. There are six bits left available to software in the 64-bit PTE after consuming a bit for _PAGE_SAVED_DIRTY. For 32 bit, the same bit as _PAGE_BIT_UFFD_WP is used, since user fault fd is not supported on 32 bit. This leaves one unused software bit on 32 bit (_PAGE_BIT_SOFT_DIRTY, as this is also not supported on 32 bit). Implement only the infrastructure for _PAGE_SAVED_DIRTY. Changes to actually begin creating _PAGE_SAVED_DIRTY PTEs will follow once other pieces are in place. Since this SavedDirty shifting is done for all x86 CPUs, this leaves the possibility for the hardware oddity to still create Write=0,Dirty=1 PTEs in rare cases. Since these CPUs also don't support shadow stack, this will be harmless as it was before the introduction of SavedDirty. Implement the shifting logic to be branchless. Embed the logic of whether to do the shifting (including checking the Write bits) so that it can be called by future callers that would otherwise need additional branching logic. This efficiency allows the logic of when to do the shifting to be centralized, making the code easier to reason about. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-11-rick.p.edgecombe%40intel.com
2023-06-12 17:10:36 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
mm/page_table_check: support userfault wr-protect entries Allow page_table_check hooks to check over userfaultfd wr-protect criteria upon pgtable updates. The rule is no co-existance allowed for any writable flag against userfault wr-protect flag. This should be better than c2da319c2e, where we used to only sanitize such issues during a pgtable walk, but when hitting such issue we don't have a good chance to know where does that writable bit came from [1], so that even the pgtable walk exposes a kernel bug (which is still helpful on triaging) but not easy to track and debug. Now we switch to track the source. It's much easier too with the recent introduction of page table check. There are some limitations with using the page table check here for userfaultfd wr-protect purpose: - It is only enabled with explicit enablement of page table check configs and/or boot parameters, but should be good enough to track at least syzbot issues, as syzbot should enable PAGE_TABLE_CHECK[_ENFORCED] for x86 [1]. We used to have DEBUG_VM but it's now off for most distros, while distros also normally not enable PAGE_TABLE_CHECK[_ENFORCED], which is similar. - It conditionally works with the ptep_modify_prot API. It will be bypassed when e.g. XEN PV is enabled, however still work for most of the rest scenarios, which should be the common cases so should be good enough. - Hugetlb check is a bit hairy, as the page table check cannot identify hugetlb pte or normal pte via trapping at set_pte_at(), because of the current design where hugetlb maps every layers to pte_t... For example, the default set_huge_pte_at() can invoke set_pte_at() directly and lose the hugetlb context, treating it the same as a normal pte_t. So far it's fine because we have huge_pte_uffd_wp() always equals to pte_uffd_wp() as long as supported (x86 only). It'll be a bigger problem when we'll define _PAGE_UFFD_WP differently at various pgtable levels, because then one huge_pte_uffd_wp() per-arch will stop making sense first.. as of now we can leave this for later too. This patch also removes commit c2da319c2e altogether, as we have something better now. [1] https://lore.kernel.org/all/000000000000dce0530615c89210@google.com/ Link: https://lkml.kernel.org/r/20240417212549.2766883-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-17 17:25:49 -04:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma() The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(), create a new arch config HAS_HUGE_PAGE that can be used to tell if pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the compiler would not be able to find pmd_mkwrite_novma(). No functional change. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/ Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
2023-06-12 17:10:27 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:13:00 -07:00
mm: introduce pte_special pte bit s390 for one, cannot implement VM_MIXEDMAP with pfn_valid, due to their memory model (which is more dynamic than most). Instead, they had proposed to implement it with an additional path through vm_normal_page(), using a bit in the pte to determine whether or not the page should be refcounted: vm_normal_page() { ... if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) { if (vma->vm_flags & VM_MIXEDMAP) { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; #else if (!pfn_valid(pfn)) return NULL; #endif goto out; } ... } This is fine, however if we are allowed to use a bit in the pte to determine refcountedness, we can use that to _completely_ replace all the vma based schemes. So instead of adding more cases to the already complex vma-based scheme, we can have a clearly seperate and simple pte-based scheme (and get slightly better code generation in the process): vm_normal_page() { #ifdef s390 if (!mixedmap_refcount_pte(pte)) return NULL; return pte_page(pte); #else ... #endif } And finally, we may rather make this concept usable by any architecture rather than making it s390 only, so implement a new type of pte state for this. Unfortunately the old vma based code must stay, because some architectures may not be able to spare pte bits. This makes vm_normal_page a little bit more ugly than we would like, but the 2 cases are clearly seperate. So introduce a pte_special pte state, and use it in mm/memory.c. It is currently a noop for all architectures, so this doesn't actually result in any compiled code changes to mm/memory.o. BTW: I haven't put vm_normal_page() into arch code as-per an earlier suggestion. The reason is that, regardless of where vm_normal_page is actually implemented, the *abstraction* is still exactly the same. Also, while it depends on whether the architecture has pte_special or not, that is the only two possible cases, and it really isn't an arch specific function -- the role of the arch code should be to provide primitive functions and accessors with which to build the core code; pte_special does that. We do not want architectures to know or care about vm_normal_page itself, and we definitely don't want them being able to invent something new there out of sight of mm/ code. If we made vm_normal_page an arch function, then we have to make vm_insert_mixed (next patch) an arch function too. So I don't think moving it to arch code fundamentally improves any abstractions, while it does practically make the code more difficult to follow, for both mm and arch developers, and easier to misuse. [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Carsten Otte <cotte@de.ibm.com> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 02:13:00 -07:00
x86/mm: Introduce _PAGE_SAVED_DIRTY Some OSes have a greater dependence on software available bits in PTEs than Linux. That left the hardware architects looking for a way to represent a new memory type (shadow stack) within the existing bits. They chose to repurpose a lightly-used state: Write=0,Dirty=1. So in order to support shadow stack memory, Linux should avoid creating memory with this PTE bit combination unless it intends for it to be shadow stack. The reason it's lightly used is that Dirty=1 is normally set by HW _before_ a write. A write with a Write=0 PTE would typically only generate a fault, not set Dirty=1. Hardware can (rarely) both set Dirty=1 *and* generate the fault, resulting in a Write=0,Dirty=1 PTE. Hardware which supports shadow stacks will no longer exhibit this oddity. So that leaves Write=0,Dirty=1 PTEs created in software. To avoid inadvertently created shadow stack memory, in places where Linux normally creates Write=0,Dirty=1, it can use the software-defined _PAGE_SAVED_DIRTY in place of the hardware _PAGE_DIRTY. In other words, whenever Linux needs to create Write=0,Dirty=1, it instead creates Write=0,SavedDirty=1 except for shadow stack, which is Write=0,Dirty=1. There are six bits left available to software in the 64-bit PTE after consuming a bit for _PAGE_SAVED_DIRTY. For 32 bit, the same bit as _PAGE_BIT_UFFD_WP is used, since user fault fd is not supported on 32 bit. This leaves one unused software bit on 32 bit (_PAGE_BIT_SOFT_DIRTY, as this is also not supported on 32 bit). Implement only the infrastructure for _PAGE_SAVED_DIRTY. Changes to actually begin creating _PAGE_SAVED_DIRTY PTEs will follow once other pieces are in place. Since this SavedDirty shifting is done for all x86 CPUs, this leaves the possibility for the hardware oddity to still create Write=0,Dirty=1 PTEs in rare cases. Since these CPUs also don't support shadow stack, this will be harmless as it was before the introduction of SavedDirty. Implement the shifting logic to be branchless. Embed the logic of whether to do the shifting (including checking the Write bits) so that it can be called by future callers that would otherwise need additional branching logic. This efficiency allows the logic of when to do the shifting to be centralized, making the code easier to reason about. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-11-rick.p.edgecombe%40intel.com
2023-06-12 17:10:36 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
mm/uffd: always wr-protect pte in pte|pmd_mkuffd_wp() This patch is a cleanup to always wr-protect pte/pmd in mkuffd_wp paths. The reasons I still think this patch is worthwhile, are: (1) It is a cleanup already; diffstat tells. (2) It just feels natural after I thought about this, if the pte is uffd protected, let's remove the write bit no matter what it was. (2) Since x86 is the only arch that supports uffd-wp, it also redefines pte|pmd_mkuffd_wp() in that it should always contain removals of write bits. It means any future arch that want to implement uffd-wp should naturally follow this rule too. It's good to make it a default, even if with vm_page_prot changes on VM_UFFD_WP. (3) It covers more than vm_page_prot. So no chance of any potential future "accident" (like pte_mkdirty() sparc64 or loongarch, even though it just got its pte_mkdirty fixed <1 month ago). It'll be fairly clear when reading the code too that we don't worry anything before a pte_mkuffd_wp() on uncertainty of the write bit. We may call pte_wrprotect() one more time in some paths (e.g. thp split), but that should be fully local bitop instruction so the overhead should be negligible. Although this patch should logically also fix all the known issues on uffd-wp too recently on page migration (not for numa hint recovery - that may need another explcit pte_wrprotect), but this is not the plan for that fix. So no fixes, and stable doesn't need this. Link: https://lkml.kernel.org/r/20221214201533.1774616-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ives van Hoorne <ives@codesandbox.io> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-14 15:15:33 -05:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
arch/x86/include/asm/pgtable.h: add pmd_[dirty|mkclean] for THP MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite of the contents since MADV_FREE syscall is called for THP page. This patch adds pmd_dirty and pmd_mkclean for THP page MADV_FREE support. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rik van Riel <riel@redhat.com> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 16:55:20 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
arch/x86/include/asm/pgtable.h: add pmd_[dirty|mkclean] for THP MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite of the contents since MADV_FREE syscall is called for THP page. This patch adds pmd_dirty and pmd_mkclean for THP page MADV_FREE support. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rik van Riel <riel@redhat.com> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 16:55:20 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma() The x86 Shadow stack feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One of these unusual properties is that shadow stack memory is writable, but only in limited ways. These limits are applied via a specific PTE bit combination. Nevertheless, the memory is writable, and core mm code will need to apply the writable permissions in the typical paths that call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so that the x86 implementation of it can know whether to create regular writable or shadow stack mappings. But there are a couple of challenges to this. Modifying the signatures of each arch pte_mkwrite() implementation would be error prone because some are generated with macros and would need to be re-implemented. Also, some pte_mkwrite() callers operate on kernel memory without a VMA. So this can be done in a three step process. First pte_mkwrite() can be renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite() added that just calls pte_mkwrite_novma(). Next callers without a VMA can be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers can be changed to take/pass a VMA. Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(), create a new arch config HAS_HUGE_PAGE that can be used to tell if pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the compiler would not be able to find pmd_mkwrite_novma(). No functional change. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/ Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
2023-06-12 17:10:27 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Introduce _PAGE_SAVED_DIRTY Some OSes have a greater dependence on software available bits in PTEs than Linux. That left the hardware architects looking for a way to represent a new memory type (shadow stack) within the existing bits. They chose to repurpose a lightly-used state: Write=0,Dirty=1. So in order to support shadow stack memory, Linux should avoid creating memory with this PTE bit combination unless it intends for it to be shadow stack. The reason it's lightly used is that Dirty=1 is normally set by HW _before_ a write. A write with a Write=0 PTE would typically only generate a fault, not set Dirty=1. Hardware can (rarely) both set Dirty=1 *and* generate the fault, resulting in a Write=0,Dirty=1 PTE. Hardware which supports shadow stacks will no longer exhibit this oddity. So that leaves Write=0,Dirty=1 PTEs created in software. To avoid inadvertently created shadow stack memory, in places where Linux normally creates Write=0,Dirty=1, it can use the software-defined _PAGE_SAVED_DIRTY in place of the hardware _PAGE_DIRTY. In other words, whenever Linux needs to create Write=0,Dirty=1, it instead creates Write=0,SavedDirty=1 except for shadow stack, which is Write=0,Dirty=1. There are six bits left available to software in the 64-bit PTE after consuming a bit for _PAGE_SAVED_DIRTY. For 32 bit, the same bit as _PAGE_BIT_UFFD_WP is used, since user fault fd is not supported on 32 bit. This leaves one unused software bit on 32 bit (_PAGE_BIT_SOFT_DIRTY, as this is also not supported on 32 bit). Implement only the infrastructure for _PAGE_SAVED_DIRTY. Changes to actually begin creating _PAGE_SAVED_DIRTY PTEs will follow once other pieces are in place. Since this SavedDirty shifting is done for all x86 CPUs, this leaves the possibility for the hardware oddity to still create Write=0,Dirty=1 PTEs in rare cases. Since these CPUs also don't support shadow stack, this will be harmless as it was before the introduction of SavedDirty. Implement the shifting logic to be branchless. Embed the logic of whether to do the shifting (including checking the Write bits) so that it can be called by future callers that would otherwise need additional branching logic. This efficiency allows the logic of when to do the shifting to be centralized, making the code easier to reason about. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-11-rick.p.edgecombe%40intel.com
2023-06-12 17:10:36 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm: soft-dirty bits for user memory changes tracking The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 15:01:20 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm: soft-dirty bits for user memory changes tracking The soft-dirty is a bit on a PTE which helps to track which pages a task writes to. In order to do this tracking one should 1. Clear soft-dirty bits from PTEs ("echo 4 > /proc/PID/clear_refs) 2. Wait some time. 3. Read soft-dirty bits (55'th in /proc/PID/pagemap2 entries) To do this tracking, the writable bit is cleared from PTEs when the soft-dirty bit is. Thus, after this, when the task tries to modify a page at some virtual address the #PF occurs and the kernel sets the soft-dirty bit on the respective PTE. Note, that although all the task's address space is marked as r/o after the soft-dirty bits clear, the #PF-s that occur after that are processed fast. This is so, since the pages are still mapped to physical memory, and thus all the kernel does is finds this fact out and puts back writable, dirty and soft-dirty bits on the PTE. Another thing to note, is that when mremap moves PTEs they are marked with soft-dirty as well, since from the user perspective mremap modifies the virtual memory at mremap's new address. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 15:01:20 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Do not auto-massage page protections A PTE is constructed from a physical address and a pgprotval_t. __PAGE_KERNEL, for instance, is a pgprot_t and must be converted into a pgprotval_t before it can be used to create a PTE. This is done implicitly within functions like pfn_pte() by massage_pgprot(). However, this makes it very challenging to set bits (and keep them set) if your bit is being filtered out by massage_pgprot(). This moves the bit filtering out of pfn_pte() and friends. For users of PAGE_KERNEL*, filtering will be done automatically inside those macros but for users of __PAGE_KERNEL*, they need to do their own filtering now. Note that we also just move pfn_pte/pmd/pud() over to check_pgprot() instead of massage_pgprot(). This way, we still *look* for unsupported bits and properly warn about them if we find them. This might happen if an unfiltered __PAGE_KERNEL* value was passed in, for instance. - printk format warning fix from: Arnd Bergmann <arnd@arndb.de> - boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com> - crash bisected by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de> Fixed-by: Tom Lendacky <thomas.lendacky@amd.com> Bisected-by: Mike Galbraith <efault@gmx.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-06 13:55:09 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() pmd_present() is expected to test positive after pmdp_mknotpresent() as the PMD entry still points to a valid huge page in memory. pmdp_mknotpresent() implies that given PMD entry is just invalidated from MMU perspective while still holding on to pmd_page() referred valid huge page thus also clearing pmd_present() test. This creates the following situation which is counter intuitive. [pmd_present(pmd_mknotpresent(pmd)) = true] This renames pmd_mknotpresent() as pmd_mkinvalid() reflecting the helper's functionality more accurately while changing the above mentioned situation as follows. This does not create any functional change. [pmd_present(pmd_mkinvalid(pmd)) = true] This is not applicable for platforms that define own pmdp_invalidate() via __HAVE_ARCH_PMDP_INVALIDATE. Suggestion for renaming came during a previous discussion here. https://patchwork.kernel.org/patch/11019637/ [anshuman.khandual@arm.com: change pmd_mknotvalid() to pmd_mkinvalid() per Will] Link: http://lkml.kernel.org/r/1587520326-10099-3-git-send-email-anshuman.khandual@arm.com Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Will Deacon <will@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1584680057-13753-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 16:03:45 -07:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Do not auto-massage page protections A PTE is constructed from a physical address and a pgprotval_t. __PAGE_KERNEL, for instance, is a pgprot_t and must be converted into a pgprotval_t before it can be used to create a PTE. This is done implicitly within functions like pfn_pte() by massage_pgprot(). However, this makes it very challenging to set bits (and keep them set) if your bit is being filtered out by massage_pgprot(). This moves the bit filtering out of pfn_pte() and friends. For users of PAGE_KERNEL*, filtering will be done automatically inside those macros but for users of __PAGE_KERNEL*, they need to do their own filtering now. Note that we also just move pfn_pte/pmd/pud() over to check_pgprot() instead of massage_pgprot(). This way, we still *look* for unsupported bits and properly warn about them if we find them. This might happen if an unfiltered __PAGE_KERNEL* value was passed in, for instance. - printk format warning fix from: Arnd Bergmann <arnd@arndb.de> - boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com> - crash bisected by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de> Fixed-by: Tom Lendacky <thomas.lendacky@amd.com> Bisected-by: Mike Galbraith <efault@gmx.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-06 13:55:09 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
x86/mm: Do not auto-massage page protections A PTE is constructed from a physical address and a pgprotval_t. __PAGE_KERNEL, for instance, is a pgprot_t and must be converted into a pgprotval_t before it can be used to create a PTE. This is done implicitly within functions like pfn_pte() by massage_pgprot(). However, this makes it very challenging to set bits (and keep them set) if your bit is being filtered out by massage_pgprot(). This moves the bit filtering out of pfn_pte() and friends. For users of PAGE_KERNEL*, filtering will be done automatically inside those macros but for users of __PAGE_KERNEL*, they need to do their own filtering now. Note that we also just move pfn_pte/pmd/pud() over to check_pgprot() instead of massage_pgprot(). This way, we still *look* for unsupported bits and properly warn about them if we find them. This might happen if an unfiltered __PAGE_KERNEL* value was passed in, for instance. - printk format warning fix from: Arnd Bergmann <arnd@arndb.de> - boot crash fix from: Tom Lendacky <thomas.lendacky@amd.com> - crash bisected by: Mike Galbraith <efault@gmx.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reported-and-fixed-by: Arnd Bergmann <arnd@arndb.de> Fixed-by: Tom Lendacky <thomas.lendacky@amd.com> Bisected-by: Mike Galbraith <efault@gmx.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205509.77E1D7F6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-06 13:55:09 -07:00
x86/speculation/l1tf: Protect PROT_NONE PTEs against speculation When PTEs are set to PROT_NONE the kernel just clears the Present bit and preserves the PFN, which creates attack surface for L1TF speculation speculation attacks. This is important inside guests, because L1TF speculation bypasses physical page remapping. While the host has its own migitations preventing leaking data from other VMs into the guest, this would still risk leaking the wrong page inside the current guest. This uses the same technique as Linus' swap entry patch: while an entry is is in PROTNONE state invert the complete PFN part part of it. This ensures that the the highest bit will point to non existing memory. The invert is done by pte/pmd_modify and pfn/pmd/pud_pte for PROTNONE and pte/pmd/pud_pfn undo it. This assume that no code path touches the PFN part of a PTE directly without using these primitives. This doesn't handle the case that MMIO is on the top of the CPU physical memory. If such an MMIO region was exposed by an unpriviledged driver for mmap it would be possible to attack some real memory. However this situation is all rather unlikely. For 32bit non PAE the inversion is not done because there are really not enough bits to protect anything. Q: Why does the guest need to be protected when the HyperVisor already has L1TF mitigations? A: Here's an example: Physical pages 1 2 get mapped into a guest as GPA 1 -> PA 2 GPA 2 -> PA 1 through EPT. The L1TF speculation ignores the EPT remapping. Now the guest kernel maps GPA 1 to process A and GPA 2 to process B, and they belong to different users and should be isolated. A sets the GPA 1 PA 2 PTE to PROT_NONE to bypass the EPT remapping and gets read access to the underlying physical page. Which in this case points to PA 2, so it can read process B's data, if it happened to be in L1, so isolation inside the guest is broken. There's nothing the hypervisor can do about this. This mitigation has to be done in the guest itself. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:24 -07:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
x86/mm: Start actually marking _PAGE_SAVED_DIRTY The recently introduced _PAGE_SAVED_DIRTY should be used instead of the HW Dirty bit whenever a PTE is Write=0, in order to not inadvertently create shadow stack PTEs. Update pte_mk*() helpers to do this, and apply the same changes to pmd and pud. Since there is no x86 version of pte_mkwrite() to hold this arch specific logic, create one. Add it to x86/mm/pgtable.c instead of x86/asm/include/pgtable.h as future patches will require it to live in pgtable.c and it will make the diff easier for reviewers. Since CPUs without shadow stack support could create Write=0,Dirty=1 PTEs, only return true for pte_shstk() if the CPU also supports shadow stack. This will prevent these HW creates PTEs as showing as true for pte_write(). For pte_modify() this is a bit trickier. It takes a "raw" pgprot_t which was not necessarily created with any of the existing PTE bit helpers. That means that it can return a pte_t with Write=0,Dirty=1, a shadow stack PTE, when it did not intend to create one. Modify it to also move _PAGE_DIRTY to _PAGE_SAVED_DIRTY. To avoid creating Write=0,Dirty=1 PTEs, pte_modify() needs to avoid: 1. Marking Write=0 PTEs Dirty=1 2. Marking Dirty=1 PTEs Write=0 The first case cannot happen as the existing behavior of pte_modify() is to filter out any Dirty bit passed in newprot. Handle the second case by shifting _PAGE_DIRTY=1 to _PAGE_SAVED_DIRTY=1 if the PTE was write protected by the pte_modify() call. Apply the same changes to pmd_modify(). Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-13-rick.p.edgecombe%40intel.com
2023-06-12 17:10:38 -07:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels _PAGE_NUMA is currently an alias of _PROT_PROTNONE to trap NUMA hinting faults on x86. Care is taken such that _PAGE_NUMA is used only in situations where the VMA flags distinguish between NUMA hinting faults and prot_none faults. This decision was x86-specific and conceptually it is difficult requiring special casing to distinguish between PROTNONE and NUMA ptes based on context. Fundamentally, we only need the _PAGE_NUMA bit to tell the difference between an entry that is really unmapped and a page that is protected for NUMA hinting faults as if the PTE is not present then a fault will be trapped. Swap PTEs on x86-64 use the bits after _PAGE_GLOBAL for the offset. This patch shrinks the maximum possible swap size and uses the bit to uniquely distinguish between NUMA hinting ptes and swap ptes. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:06:30 -07:00
mm: fix TLB flush race between migration, and change_protection_range There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18 17:08:44 -08:00
mm: fix TLB flush race between migration, and change_protection_range There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18 17:08:44 -08:00
mm: remove remaining references to NUMA hinting bits and helpers This patch removes the NUMA PTE bits and associated helpers. As a side-effect it increases the maximum possible swap space on x86-64. One potential source of problems is races between the marking of PTEs PROT_NONE, NUMA hinting faults and migration. It must be guaranteed that a PTE being protected is not faulted in parallel, seen as a pte_none and corrupting memory. The base case is safe but transhuge has problems in the past due to an different migration mechanism and a dependance on page lock to serialise migrations and warrants a closer look. task_work hinting update parallel fault ------------------------ -------------- change_pmd_range change_huge_pmd __pmd_trans_huge_lock pmdp_get_and_clear __handle_mm_fault pmd_none do_huge_pmd_anonymous_page read? pmd_lock blocks until hinting complete, fail !pmd_none test write? __do_huge_pmd_anonymous_page acquires pmd_lock, checks pmd_none pmd_modify set_pmd_at task_work hinting update parallel migration ------------------------ ------------------ change_pmd_range change_huge_pmd __pmd_trans_huge_lock pmdp_get_and_clear __handle_mm_fault do_huge_pmd_numa_page migrate_misplaced_transhuge_page pmd_lock waits for updates to complete, recheck pmd_same pmd_modify set_pmd_at Both of those are safe and the case where a transhuge page is inserted during a protection update is unchanged. The case where two processes try migrating at the same time is unchanged by this series so should still be ok. I could not find a case where we are accidentally depending on the PTE not being cleared and flushed. If one is missed, it'll manifest as corruption problems that start triggering shortly after this series is merged and only happen when NUMA balancing is enabled. Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jones <davej@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:32 -08:00
mm: fix TLB flush race between migration, and change_protection_range There are a few subtle races, between change_protection_range (used by mprotect and change_prot_numa) on one side, and NUMA page migration and compaction on the other side. The basic race is that there is a time window between when the PTE gets made non-present (PROT_NONE or NUMA), and the TLB is flushed. During that time, a CPU may continue writing to the page. This is fine most of the time, however compaction or the NUMA migration code may come in, and migrate the page away. When that happens, the CPU may continue writing, through the cached translation, to what is no longer the current memory location of the process. This only affects x86, which has a somewhat optimistic pte_accessible. All other architectures appear to be safe, and will either always flush, or flush whenever there is a valid mapping, even with no permissions (SPARC). The basic race looks like this: CPU A CPU B CPU C load TLB entry make entry PTE/PMD_NUMA fault on entry read/write old page start migrating page change PTE/PMD to new page read/write old page [*] flush TLB reload TLB from new entry read/write new page lose data [*] the old page may belong to a new user at this point! The obvious fix is to flush remote TLB entries, by making sure that pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may still be accessible if there is a TLB flush pending for the mm. This should fix both NUMA migration and compaction. [mgorman@suse.de: fix build] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Alex Thorlton <athorlton@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-18 17:08:44 -08:00
mm: remove remaining references to NUMA hinting bits and helpers This patch removes the NUMA PTE bits and associated helpers. As a side-effect it increases the maximum possible swap space on x86-64. One potential source of problems is races between the marking of PTEs PROT_NONE, NUMA hinting faults and migration. It must be guaranteed that a PTE being protected is not faulted in parallel, seen as a pte_none and corrupting memory. The base case is safe but transhuge has problems in the past due to an different migration mechanism and a dependance on page lock to serialise migrations and warrants a closer look. task_work hinting update parallel fault ------------------------ -------------- change_pmd_range change_huge_pmd __pmd_trans_huge_lock pmdp_get_and_clear __handle_mm_fault pmd_none do_huge_pmd_anonymous_page read? pmd_lock blocks until hinting complete, fail !pmd_none test write? __do_huge_pmd_anonymous_page acquires pmd_lock, checks pmd_none pmd_modify set_pmd_at task_work hinting update parallel migration ------------------------ ------------------ change_pmd_range change_huge_pmd __pmd_trans_huge_lock pmdp_get_and_clear __handle_mm_fault do_huge_pmd_numa_page migrate_misplaced_transhuge_page pmd_lock waits for updates to complete, recheck pmd_same pmd_modify set_pmd_at Both of those are safe and the case where a transhuge page is inserted during a protection update is unchanged. The case where two processes try migrating at the same time is unchanged by this series so should still be ok. I could not find a case where we are accidentally depending on the PTE not being cleared and flushed. If one is missed, it'll manifest as corruption problems that start triggering shortly after this series is merged and only happen when NUMA balancing is enabled. Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jones <davej@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 14:58:32 -08:00
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 21:32:38 -07:00
mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG Some architectures support the accessed bit in non-leaf PMD entries, e.g., x86 sets the accessed bit in a non-leaf PMD entry when using it as part of linear address translation [1]. Page table walkers that clear the accessed bit may use this capability to reduce their search space. Note that: 1. Although an inline function is preferable, this capability is added as a configuration option for consistency with the existing macros. 2. Due to the little interest in other varieties, this capability was only tested on Intel and AMD CPUs. Thanks to the following developers for their efforts [2][3]. Randy Dunlap <rdunlap@infradead.org> Stephen Rothwell <sfr@canb.auug.org.au> [1]: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3 (June 2021), section 4.8 [2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/ [3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/ Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 01:59:59 -06:00
mm/x86: make pud_leaf() only care about PSE bit When working on mprotect() on 1G dax entries, I hit an zap bad pud error when zapping a huge pud that is with PROT_NONE permission. Here the problem is x86's pud_leaf() requires both PRESENT and PSE bits set to report a pud entry as a leaf, but that doesn't look right, as it's not following the pXd_leaf() definition that we stick with so far, where PROT_NONE entries should be reported as leaves. To fix it, change x86's pud_leaf() implementation to only check against PSE bit to report a leaf, irrelevant of whether PRESENT bit is set. Link: https://lkml.kernel.org/r/20240812181225.1360970-5-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:22 -04:00
x86/mm: simplify init_trampoline() and surrounding logic There are three cases for the trampoline initialization: * 32-bit does nothing * 64-bit with kaslr disabled simply copies a PGD entry from the direct map to the trampoline PGD * 64-bit with kaslr enabled maps the real mode trampoline at PUD level These cases are currently differentiated by a bunch of ifdefs inside asm/include/pgtable.h and the case of 64-bits with kaslr on uses pgd_index() helper. Replacing the ifdefs with a static function in arch/x86/mm/init.c gives clearer code and allows moving pgd_index() to the generic implementation in include/linux/pgtable.h [rppt@linux.ibm.com: take CONFIG_RANDOMIZE_MEMORY into account in kaslr_enabled()] Link: http://lkml.kernel.org/r/20200525104045.GB13212@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-8-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08 21:33:01 -07:00
x86/mm: Separate variable for trampoline PGD Use a separate global variable to define the trampoline PGD used to start other processors. This change will allow KALSR memory randomization to change the trampoline PGD to be correctly aligned with physical memory. Signed-off-by: Thomas Garnier <thgarnie@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: kernel-hardening@lists.openwall.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/1466556426-32664-5-git-send-email-keescook@chromium.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-21 17:47:01 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pmd[s]_set() This reverts commit a3b837130b58 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pmd_set"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. Apply this to __page_table_check_pmds_set(), page_table_check_pmd_set(), and the page_table_check_pmd_set() wrapper macro. [ajd@linux.ibm.com: rebase on arm64 + riscv changes, update commit message] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-4-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:36 +11:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pud[s]_set() This reverts commit 6d144436d954 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pud_set"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. Apply this to __page_table_check_puds_set(), page_table_check_puds_set() and the page_table_check_pud_set() wrapper macro. [ajd@linux.ibm.com: rebase on riscv + arm64 changes, update commit message] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-3-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:35 +11:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pte_clear() This reverts commit aa232204c468 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pte_clear"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. [ajd@linux.ibm.com: rebase, fix additional occurrence and loop handling] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-8-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:40 +11:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pte_clear() This reverts commit aa232204c468 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pte_clear"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. [ajd@linux.ibm.com: rebase, fix additional occurrence and loop handling] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-8-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:40 +11:00
x86/mm: Update ptep/pmdp_set_wrprotect() for _PAGE_SAVED_DIRTY When shadow stack is in use, Write=0,Dirty=1 PTE are preserved for shadow stack. Copy-on-write PTEs then have Write=0,SavedDirty=1. When a PTE goes from Write=1,Dirty=1 to Write=0,SavedDirty=1, it could become a transient shadow stack PTE in two cases: 1. Some processors can start a write but end up seeing a Write=0 PTE by the time they get to the Dirty bit, creating a transient shadow stack PTE. However, this will not occur on processors supporting shadow stack, and a TLB flush is not necessary. 2. When _PAGE_DIRTY is replaced with _PAGE_SAVED_DIRTY non-atomically, a transient shadow stack PTE can be created as a result. Prevent the second case when doing a write protection and Dirty->SavedDirty shift at the same time with a CMPXCHG loop. The first case Note, in the PAE case CMPXCHG will need to operate on 8 byte, but try_cmpxchg() will not use CMPXCHG8B, so it cannot operate on a full PAE PTE. However the exiting logic is not operating on a full 8 byte region either, and relies on the fact that the Write bit is in the first 4 bytes when doing the clear_bit(). Since both the Dirty, SavedDirty and Write bits are in the first 4 bytes, casting to a long will be similar to the existing behavior which also casts to a long. Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided many insights to the issue. Jann Horn provided the CMPXCHG solution. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-12-rick.p.edgecombe%40intel.com
2023-06-12 17:10:37 -07:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pmd_clear() This reverts commit 1831414cd729 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pmd_clear"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. [ajd@linux.ibm.com: rebase on arm64 changes] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-7-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:39 +11:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pud_clear() This reverts commit 931c38e16499 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pud_clear"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. [ajd@linux.ibm.com: rebase on arm64 changes] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-6-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:38 +11:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/mm: Update ptep/pmdp_set_wrprotect() for _PAGE_SAVED_DIRTY When shadow stack is in use, Write=0,Dirty=1 PTE are preserved for shadow stack. Copy-on-write PTEs then have Write=0,SavedDirty=1. When a PTE goes from Write=1,Dirty=1 to Write=0,SavedDirty=1, it could become a transient shadow stack PTE in two cases: 1. Some processors can start a write but end up seeing a Write=0 PTE by the time they get to the Dirty bit, creating a transient shadow stack PTE. However, this will not occur on processors supporting shadow stack, and a TLB flush is not necessary. 2. When _PAGE_DIRTY is replaced with _PAGE_SAVED_DIRTY non-atomically, a transient shadow stack PTE can be created as a result. Prevent the second case when doing a write protection and Dirty->SavedDirty shift at the same time with a CMPXCHG loop. The first case Note, in the PAE case CMPXCHG will need to operate on 8 byte, but try_cmpxchg() will not use CMPXCHG8B, so it cannot operate on a full PAE PTE. However the exiting logic is not operating on a full 8 byte region either, and relies on the fact that the Write bit is in the first 4 bytes when doing the clear_bit(). Since both the Dirty, SavedDirty and Write bits are in the first 4 bytes, casting to a long will be similar to the existing behavior which also casts to a long. Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided many insights to the issue. Jann Horn provided the CMPXCHG solution. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-12-rick.p.edgecombe%40intel.com
2023-06-12 17:10:37 -07:00
x86/mm: Update ptep/pmdp_set_wrprotect() for _PAGE_SAVED_DIRTY When shadow stack is in use, Write=0,Dirty=1 PTE are preserved for shadow stack. Copy-on-write PTEs then have Write=0,SavedDirty=1. When a PTE goes from Write=1,Dirty=1 to Write=0,SavedDirty=1, it could become a transient shadow stack PTE in two cases: 1. Some processors can start a write but end up seeing a Write=0 PTE by the time they get to the Dirty bit, creating a transient shadow stack PTE. However, this will not occur on processors supporting shadow stack, and a TLB flush is not necessary. 2. When _PAGE_DIRTY is replaced with _PAGE_SAVED_DIRTY non-atomically, a transient shadow stack PTE can be created as a result. Prevent the second case when doing a write protection and Dirty->SavedDirty shift at the same time with a CMPXCHG loop. The first case Note, in the PAE case CMPXCHG will need to operate on 8 byte, but try_cmpxchg() will not use CMPXCHG8B, so it cannot operate on a full PAE PTE. However the exiting logic is not operating on a full 8 byte region either, and relies on the fact that the Write bit is in the first 4 bytes when doing the clear_bit(). Since both the Dirty, SavedDirty and Write bits are in the first 4 bytes, casting to a long will be similar to the existing behavior which also casts to a long. Dave Hansen, Jann Horn, Andy Lutomirski, and Peter Zijlstra provided many insights to the issue. Jann Horn provided the CMPXCHG solution. Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-12-rick.p.edgecombe%40intel.com
2023-06-12 17:10:37 -07:00
mm: fix device-dax pud write-faults triggered by get_user_pages() Currently only get_user_pages_fast() can safely handle the writable gup case due to its use of pud_access_permitted() to check whether the pud entry is writable. In the gup slow path pud_write() is used instead of pud_access_permitted() and to date it has been unimplemented, just calls BUG_ON(). kernel BUG at ./include/linux/hugetlb.h:244! [..] RIP: 0010:follow_devmap_pud+0x482/0x490 [..] Call Trace: follow_page_mask+0x28c/0x6e0 __get_user_pages+0xe4/0x6c0 get_user_pages_unlocked+0x130/0x1b0 get_user_pages_fast+0x89/0xb0 iov_iter_get_pages_alloc+0x114/0x4a0 nfs_direct_read_schedule_iovec+0xd2/0x350 ? nfs_start_io_direct+0x63/0x70 nfs_file_direct_read+0x1e0/0x250 nfs_file_read+0x90/0xc0 For now this just implements a simple check for the _PAGE_RW bit similar to pmd_write. However, this implies that the gup-slow-path check is missing the extra checks that the gup-fast-path performs with pud_access_permitted. Later patches will align all checks to use the 'access_permitted' helper if the architecture provides it. Note that the generic 'access_permitted' helper fallback is the simple _PAGE_RW check on architectures that do not define the 'access_permitted' helper(s). [dan.j.williams@intel.com: fix powerpc compile error] Link: http://lkml.kernel.org/r/151129126165.37405.16031785266675461397.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/151043109938.2842.14834662818213616199.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Thomas Gleixner <tglx@linutronix.de> [x86] Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29 16:10:06 -08:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pmd[s]_set() This reverts commit a3b837130b58 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pmd_set"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. Apply this to __page_table_check_pmds_set(), page_table_check_pmd_set(), and the page_table_check_pmd_set() wrapper macro. [ajd@linux.ibm.com: rebase on arm64 + riscv changes, update commit message] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-4-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:36 +11:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
mm/page_table_check: reinstate address parameter in [__]page_table_check_pud[s]_set() This reverts commit 6d144436d954 ("mm/page_table_check: remove unused parameter in [__]page_table_check_pud_set"). Reinstate previously unused parameters for the purpose of supporting powerpc platforms, as many do not encode user/kernel ownership of the page in the pte, but instead in the address of the access. Apply this to __page_table_check_puds_set(), page_table_check_puds_set() and the page_table_check_pud_set() wrapper macro. [ajd@linux.ibm.com: rebase on riscv + arm64 changes, update commit message] Link: https://lkml.kernel.org/r/20251219-pgtable_check_v18rebase-v18-3-755bc151a50b@linux.ibm.com Signed-off-by: Rohan McLure <rmclure@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Acked-by: Ingo Molnar <mingo@kernel.org> # x86 Acked-by: Alexandre Ghiti <alexghiti@rivosinc.com> # riscv Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: "Christophe Leroy (CS GROUP)" <chleroy@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: Guo Weikang <guoweikang.kernel@gmail.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Magnus Lindholm <linmag7@gmail.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Miehlbradt <nicholas@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Cc: Thomas Huth <thuth@redhat.com> Cc: "Vishal Moola (Oracle)" <vishal.moola@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-12-19 04:09:35 +11:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
mm/x86: add missing pud helpers Some new helpers will be needed for pud entry updates soon. Introduce these helpers by referencing the pmd ones. Namely: - pudp_invalidate(): this helper invalidates a huge pud before a split happens, so that the invalidated pud entry will make sure no race will happen (either with software, like a concurrent zap, or hardware, like a/d bit lost). - pud_modify(): this helper applies a new pgprot to an existing huge pud mapping. For more information on why we need these two helpers, please refer to the corresponding pmd helpers in the mprotect() code path. When at it, simplify the pud_modify()/pmd_modify() comments on shadow stack pgtable entries to reference pte_modify() to avoid duplicating the whole paragraph three times. Link: https://lkml.kernel.org/r/20240812181225.1360970-7-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:24 -04:00
mm, x86: add support for PUD-sized transparent hugepages The current transparent hugepage code only supports PMDs. This patch adds support for transparent use of PUDs with DAX. It does not include support for anonymous pages. x86 support code also added. Most of this patch simply parallels the work that was done for huge PMDs. The only major difference is how the new ->pud_entry method in mm_walk works. The ->pmd_entry method replaces the ->pte_entry method, whereas the ->pud_entry method works along with either ->pmd_entry or ->pte_entry. The pagewalk code takes care of locking the PUD before calling ->pud_walk, so handlers do not need to worry whether the PUD is stable. [dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()] Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com [dave.jiang@intel.com: native_pud_clear missing on i386 build] Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 14:57:02 -08:00
x86/pgtable: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE Let's use bit 3 to remember PG_anon_exclusive in swap ptes. [david@redhat.com: fix 32-bit swap layout] Link: https://lkml.kernel.org/r/d875c292-46b3-f281-65ae-71d0b0c6f592@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:20:46 -07:00
x86/pgtable: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE Let's use bit 3 to remember PG_anon_exclusive in swap ptes. [david@redhat.com: fix 32-bit swap layout] Link: https://lkml.kernel.org/r/d875c292-46b3-f281-65ae-71d0b0c6f592@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-09 18:20:46 -07:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
userfaultfd: wp: add WP pagetable tracking to x86 Accurate userfaultfd WP tracking is possible by tracking exactly which virtual memory ranges were writeprotected by userland. We can't relay only on the RW bit of the mapped pagetable because that information is destroyed by fork() or KSM or swap. If we were to relay on that, we'd need to stay on the safe side and generate false positive wp faults for every swapped out page. [peterx@redhat.com: append _PAGE_UFD_WP to _PAGE_CHG_MASK] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-4-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-06 20:05:33 -07:00
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys Today, for normal faults and page table walks, we check the VMA and/or PTE to ensure that it is compatible with the action. For instance, if we get a write fault on a non-writeable VMA, we SIGSEGV. We try to do the same thing for protection keys. Basically, we try to make sure that if a user does this: mprotect(ptr, size, PROT_NONE); *ptr = foo; they see the same effects with protection keys when they do this: mprotect(ptr, size, PROT_READ|PROT_WRITE); set_pkey(ptr, size, 4); wrpkru(0xffffff3f); // access disable pkey 4 *ptr = foo; The state to do that checking is in the VMA, but we also sometimes have to do it on the page tables only, like when doing a get_user_pages_fast() where we have no VMA. We add two functions and expose them to generic code: arch_pte_access_permitted(pte_flags, write) arch_vma_access_permitted(vma, write) These are, of course, backed up in x86 arch code with checks against the PTE or VMA's protection key. But, there are also cases where we do not want to respect protection keys. When we ptrace(), for instance, we do not want to apply the tracer's PKRU permissions to the PTEs from the process being traced. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave@sr71.net> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20160212210219.14D5D715@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-12 13:02:19 -08:00
mm: Don't allow write GUPs to shadow stack memory The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. In userspace, shadow stack memory is writable only in very specific, controlled ways. However, since userspace can, even in the limited ways, modify shadow stack contents, the kernel treats it as writable memory. As a result, without additional work there would remain many ways for userspace to trigger the kernel to write arbitrary data to shadow stacks via get_user_pages(, FOLL_WRITE) based operations. To help userspace protect their shadow stacks, make this a little less exposed by blocking writable get_user_pages() operations for shadow stack VMAs. Still allow FOLL_FORCE to write through shadow stack protections, as it does for read-only protections. This is required for debugging use cases. [ dhansen: fix rebase goof, readd writable_file_mapping_allowed() hunk ] Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-23-rick.p.edgecombe%40intel.com
2023-06-12 17:10:48 -07:00
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 15:48:27 -07:00
mm: Warn on shadow stack memory in wrong vma The x86 Control-flow Enforcement Technology (CET) feature includes a new type of memory called shadow stack. This shadow stack memory has some unusual properties, which requires some core mm changes to function properly. One sharp edge is that PTEs that are both Write=0 and Dirty=1 are treated as shadow by the CPU, but this combination used to be created by the kernel on x86. Previous patches have changed the kernel to now avoid creating these PTEs unless they are for shadow stack memory. In case any missed corners of the kernel are still creating PTEs like this for non-shadow stack memory, and to catch any re-introductions of the logic, warn if any shadow stack PTEs (Write=0, Dirty=1) are found in non-shadow stack VMAs when they are being zapped. This won't catch transient cases but should have decent coverage. In order to check if a PTE is shadow stack in core mm code, add two arch breakouts arch_check_zapped_pte/pmd(). This will allow shadow stack specific code to be kept in arch/x86. Only do the check if shadow stack is supported by the CPU and configured because in rare cases older CPUs may write Dirty=1 to a Write=0 CPU on older CPUs. This check is handled in pte_shstk()/pmd_shstk(). Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: John Allen <john.allen@amd.com> Tested-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/all/20230613001108.3040476-18-rick.p.edgecombe%40intel.com
2023-06-12 17:10:43 -07:00
mm/x86: implement arch_check_zapped_pud() Introduce arch_check_zapped_pud() to sanity check shadow stack on PUD zaps. It has the same logic as the PMD helper. One thing to mention is, it might be a good idea to use page_table_check in the future for trapping wrong setups of shadow stack pgtable entries [1]. That is left for the future as a separate effort. [1] https://lore.kernel.org/all/59d518698f664e07c036a5098833d7b56b953305.camel@intel.com Link: https://lkml.kernel.org/r/20240812181225.1360970-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: "Edgecombe, Rick P" <rick.p.edgecombe@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-08-12 14:12:23 -04:00