linux/drivers/devfreq/governor_passive.c

475 lines
12 KiB

PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add cpu based scaling support to passive governor Many CPU architectures have caches that can scale independent of the CPUs. Frequency scaling of the caches is necessary to make sure that the cache is not a performance bottleneck that leads to poor performance and power. The same idea applies for RAM/DDR. To achieve this, this patch adds support for cpu based scaling to the passive governor. This is accomplished by taking the current frequency of each CPU frequency domain and then adjust the frequency of the cache (or any devfreq device) based on the frequency of the CPUs. It listens to CPU frequency transition notifiers to keep itself up to date on the current CPU frequency. To decide the frequency of the device, the governor does one of the following: * Derives the optimal devfreq device opp from required-opps property of the parent cpu opp_table. * Scales the device frequency in proportion to the CPU frequency. So, if the CPUs are running at their max frequency, the device runs at its max frequency. If the CPUs are running at their min frequency, the device runs at its min frequency. It is interpolated for frequencies in between. Tested-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Johnson Wang <johnson.wang@mediatek.com> Signed-off-by: Saravana Kannan <skannan@codeaurora.org> [Sibi: Integrated cpu-freqmap governor into passive_governor] Signed-off-by: Sibi Sankar <sibis@codeaurora.org> [Chanwoo: Fix conflict with latest code and cleanup code] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-03-02 15:58:21 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00
PM / devfreq: Add new passive governor This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-22 13:44:03 +09:00