linux/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c

1000 lines
25 KiB

drm/amdgpu: Reject impossible entities early Currently there are two different behaviour modes when userspace tries to operate on not present HW IP blocks. On a machine without UVD, VCE and VPE blocks, this can be observed for example like this: $ sudo ./amd_fuzzing --r cs-wait-fuzzing ... amd_cs_wait_fuzzing DRM_IOCTL_AMDGPU_CTX r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_GFX r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_COMPUTE r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_DMA r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_UVD r -1 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_VCE r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_UVD_ENC r -1 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_VCN_DEC r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_VCN_ENC r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_VCN_JPEG r 0 amd_cs_wait_fuzzing AMDGPU_WAIT_CS AMD_IP_VPE r 0 We can see that UVD returns an errno (-EINVAL) from the CS_WAIT ioctl, while VCE and VPE return unexpected successes. The difference stems from the fact the UVD is a load balancing engine which retains the context, so with a workaround implemented in amdgpu_ctx_init_entity(), but which does not account for the fact hardware block may not be present. This causes a single NULL scheduler to be passed to drm_sched_entity_init(), which immediately rejects this with -EINVAL. The not present VCE and VPE cases on the other hand pass zero schedulers to drm_sched_entity_init(), which is explicitly allowed and results in unusable entities. As the UVD case however shows, call paths can handle the errors, so we can consolidate this into a single path which will always return -EINVAL if the HW IP block is not present. We do this by rejecting it early and not calling drm_sched_entity_init() when there is no backing hardware. This also removes the need for the drm_sched_entity_init() to handle the zero schedulers and NULL scheduler cases, which means that we can follow up by removing the special casing from the DRM scheduler. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> References: f34e8bb7d6c6 ("drm/sched: fix null-ptr-deref in init entity") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-07 12:43:49 +00:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
dma-buf: Rename struct fence to dma_fence I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
2016-10-25 13:00:45 +01:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00
drm/gpu-sched: fix force APP kill hang(v4) issue: there are VMC page fault occurred if force APP kill during 3dmark test, the cause is in entity_fini we manually signal all those jobs in entity's queue which confuse the sync/dep mechanism: 1)page fault occurred in sdma's clear job which operate on shadow buffer, and shadow buffer's Gart table is cleaned by ttm_bo_release since the fence in its reservation was fake signaled by entity_fini() under the case of SIGKILL received. 2)page fault occurred in gfx' job because during the lifetime of gfx job we manually fake signal all jobs from its entity in entity_fini(), thus the unmapping/clear PTE job depend on those result fence is satisfied and sdma start clearing the PTE and lead to GFX page fault. fix: 1)should at least wait all jobs already scheduled complete in entity_fini() if SIGKILL is the case. 2)if a fence signaled and try to clear some entity's dependency, should set this entity guilty to prevent its job really run since the dependency is fake signaled. v2: splitting drm_sched_entity_fini() into two functions: 1)The first one is does the waiting, removes the entity from the runqueue and returns an error when the process was killed. 2)The second one then goes over the entity, install it as completion signal for the remaining jobs and signals all jobs with an error code. v3: 1)Replace the fini1 and fini2 with better name 2)Call the first part before the VM teardown in amdgpu_driver_postclose_kms() and the second part after the VM teardown 3)Keep the original function drm_sched_entity_fini to refine the code. v4: 1)Rename entity->finished to entity->last_scheduled; 2)Rename drm_sched_entity_fini_job_cb() to drm_sched_entity_kill_jobs_cb(); 3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT; 4)Replace the type of entity->fini_status with "int"; 5)Remove the check about entity->finished. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-04-16 10:07:02 +08:00