kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/input/mouse/psmouse-smbus.c

320 lines
7.8 KiB
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 10:11:33 +02:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - allow to control psmouse_deactivate This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-22 17:30:31 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - avoid flush_scheduled_work() usage Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16 21:04:59 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - fix cleaning up SMBus companions When trying to destroy platform data after destruction of SMbus companion, we need to make sure that we are actually dealing with an SMB companion device, and not some random I2C client device. Fixes: 8eb92e5c9133 ("Input: psmouse - add support for SMBus companions") Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 11:33:11 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - fix cleaning up SMBus companions When trying to destroy platform data after destruction of SMbus companion, we need to make sure that we are actually dealing with an SMB companion device, and not some random I2C client device. Fixes: 8eb92e5c9133 ("Input: psmouse - add support for SMBus companions") Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 11:33:11 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - set up dependency between PS/2 and SMBus companions When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we create SMBus companion devices that are attached to I2C/SMBus controllers. However, when suspending and resuming, we also need to make sure that we take into account the PS/2 device they are associated with, so that PS/2 device is suspended after the companion and resumed before it, otherwise companions will not work properly. Before I2C devices were marked for asynchronous suspend/resume, this ordering happened naturally, but now we need to enforce it by establishing device links, with PS/2 devices being suppliers and SMBus companions being consumers. Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices") Reported-and-tested-by: Hugh Dickins <hughd@google.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15 13:32:26 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - fix cleaning up SMBus companions When trying to destroy platform data after destruction of SMbus companion, we need to make sure that we are actually dealing with an SMB companion device, and not some random I2C client device. Fixes: 8eb92e5c9133 ("Input: psmouse - add support for SMBus companions") Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 11:33:11 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - use i2c_client_type to locate i2c clients Now that i2c_client_type structure is exported, we can use it, instead of i2c_adapter_type, when looking for devices that are i2c clients. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-25 10:45:13 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Revert "Input: psmouse - add delay when deactivating for SMBus mode" This reverts commit 92e24e0e57f72e06c2df87116557331fd2d4dda2. While the patch itself is correct, it uncovered an issue with fallback to PS/2 mode, where we were leaving psmouse->fast_reconnect handler set to psmouse_smbus_reconnect(), which caused crashes. While discussing various approaches to fix the issue it was noted that this patch ass undesired delay in the "fast" resume path of PS/2 device, and it would be better to actually use "reset_delay" option defined in struct rmi_device_platform_data and have RMI code handle it for SMBus transport as well. So this patch is being reverted to deal with crashes and a better solution will be merged shortly. Reported-by: Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/all/ca0109fa-c64b-43c1-a651-75b294d750a1@leemhuis.info/ Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-10-12 15:54:21 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - avoid flush_scheduled_work() usage Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16 21:04:59 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - fix cleaning up SMBus companions When trying to destroy platform data after destruction of SMbus companion, we need to make sure that we are actually dealing with an SMB companion device, and not some random I2C client device. Fixes: 8eb92e5c9133 ("Input: psmouse - add support for SMBus companions") Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-04-01 11:33:11 -07:00
Input: psmouse - set up dependency between PS/2 and SMBus companions When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we create SMBus companion devices that are attached to I2C/SMBus controllers. However, when suspending and resuming, we also need to make sure that we take into account the PS/2 device they are associated with, so that PS/2 device is suspended after the companion and resumed before it, otherwise companions will not work properly. Before I2C devices were marked for asynchronous suspend/resume, this ordering happened naturally, but now we need to enforce it by establishing device links, with PS/2 devices being suppliers and SMBus companions being consumers. Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices") Reported-and-tested-by: Hugh Dickins <hughd@google.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15 13:32:26 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - switch to using i2c_new_scanned_device() Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200210165902.5250-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-10 09:57:23 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - switch to using i2c_new_scanned_device() Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200210165902.5250-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-10 09:57:23 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - switch to using i2c_new_scanned_device() Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200210165902.5250-1-wsa+renesas@sang-engineering.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-10 09:57:23 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - allow to control psmouse_deactivate This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-22 17:30:31 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - allow to control psmouse_deactivate This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-22 17:30:31 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: elantech - add support for SMBus devices Many of the Elantech devices are connected through PS/2 and a different bus (SMBus or plain I2C). To not break any existing device, we only enable SMBus based on a module parameter. If some laptops require the quirk to be set, we will have to rely on a list of PNPIds or MDI matching to individually expose those hardware over SMBus. the parameter mentioned above is elantech_smbus from the psmouse module. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-22 17:28:23 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Revert "Input: psmouse - add delay when deactivating for SMBus mode" This reverts commit 92e24e0e57f72e06c2df87116557331fd2d4dda2. While the patch itself is correct, it uncovered an issue with fallback to PS/2 mode, where we were leaving psmouse->fast_reconnect handler set to psmouse_smbus_reconnect(), which caused crashes. While discussing various approaches to fix the issue it was noted that this patch ass undesired delay in the "fast" resume path of PS/2 device, and it would be better to actually use "reset_delay" option defined in struct rmi_device_platform_data and have RMI code handle it for SMBus transport as well. So this patch is being reverted to deal with crashes and a better solution will be merged shortly. Reported-by: Thorsten Leemhuis <linux@leemhuis.info> Closes: https://lore.kernel.org/all/ca0109fa-c64b-43c1-a651-75b294d750a1@leemhuis.info/ Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-10-12 15:54:21 -07:00
Input: psmouse-smbus - allow to control psmouse_deactivate This seems to be Synaptics specific, as some Elan touchpads are not correctly switching to SMBus if we call deactivate before switching to SMBus on cold boot and on resume. Tested with the T480s Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-22 17:30:31 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse - set up dependency between PS/2 and SMBus companions When we switch from emulated PS/2 to native (RMI4 or Elan) protocols, we create SMBus companion devices that are attached to I2C/SMBus controllers. However, when suspending and resuming, we also need to make sure that we take into account the PS/2 device they are associated with, so that PS/2 device is suspended after the companion and resumed before it, otherwise companions will not work properly. Before I2C devices were marked for asynchronous suspend/resume, this ordering happened naturally, but now we need to enforce it by establishing device links, with PS/2 devices being suppliers and SMBus companions being consumers. Fixes: 172d931910e1 ("i2c: enable async suspend/resume on i2c client devices") Reported-and-tested-by: Hugh Dickins <hughd@google.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/89456fcd-a113-4c82-4b10-a9bcaefac68f@google.com Link: https://lore.kernel.org/r/YgwQN8ynO88CPMju@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-02-15 13:32:26 -08:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - use guard notation when acquiring mutex This makes the code more compact and error handling more robust by ensuring that mutexes are released in all code paths when control leaves critical section. Link: https://lore.kernel.org/r/ZsrAa9XcDvHeIs9T@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-08-24 22:26:03 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - add WQ_UNBOUND to alloc_workqueue user Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. alloc_workqueue() treats all queues as per-CPU by default, while unbound workqueues must opt-in via WQ_UNBOUND. This default is suboptimal: most workloads benefit from unbound queues, allowing the scheduler to place worker threads where they’re needed and reducing noise when CPUs are isolated. This patch continues the effort to refactor worqueue APIs, which has begun with the change introducing new workqueues and a new alloc_workqueue flag: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") This specific workload do not benefit from a per-cpu workqueue, so use WQ_UNBOUND on the custom workqueue instead. With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND), any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND must now use WQ_PERCPU. Once migration is complete, WQ_UNBOUND can be removed and unbound will become the implicit default. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Link: https://patch.msgid.link/20251106141955.218911-5-marco.crivellari@suse.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-11-06 15:19:55 +01:00
Input: psmouse-smbus - avoid flush_scheduled_work() usage Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16 21:04:59 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - avoid flush_scheduled_work() usage Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16 21:04:59 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00
Input: psmouse-smbus - avoid flush_scheduled_work() usage Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local psmouse_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/25e2b787-cb2c-fb0d-d62c-6577ad1cd9df@I-love.SAKURA.ne.jp Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-05-16 21:04:59 -07:00
Input: psmouse - add support for SMBus companions This provides glue between PS/2 devices that enumerate the RMI4 devices and Elan touchpads to the RMI4 (or Elan) SMBus driver. The SMBus devices keep their PS/2 connection alive. If the initialization process goes too far (psmouse_activate called), the device disconnects from the I2C bus and stays on the PS/2 bus, that is why we explicitly disable PS/2 device reporting (by calling psmouse_deactivate) before trying to register SMBus companion device. The HID over I2C devices are enumerated through the ACPI DSDT, and their PS/2 device also exports the InterTouch bit in the extended capability 0x0C. However, the firmware keeps its I2C connection open even after going further in the PS/2 initialization. We don't need to take extra precautions with those device, especially because they block their PS/2 communication when HID over I2C is used. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-03-02 10:48:23 -08:00