linux/drivers/soc/qcom/Kconfig

306 lines
9.9 KiB

soc: qcom: fix QCOM_AOSS_QMP dependency and build errors Fix Kconfig warning and subsequent build errors that are caused when PM_GENERIC_DOMAINS=y but CONFIG_PM is not set/enabled. WARNING: unmet direct dependencies detected for PM_GENERIC_DOMAINS Depends on [n]: PM [=n] Selected by [m]: - QCOM_AOSS_QMP [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && MAILBOX [=y] && COMMON_CLK [=y] Fixes these build errors: ../drivers/base/power/domain.c: In function ‘genpd_queue_power_off_work’: ../drivers/base/power/domain.c:485:13: error: ‘pm_wq’ undeclared (first use in this function) queue_work(pm_wq, &genpd->power_off_work); ../drivers/base/power/domain.c:485:13: note: each undeclared identifier is reported only once for each function it appears in ../drivers/base/power/domain.c: In function ‘genpd_dev_pm_qos_notifier’: ../drivers/base/power/domain.c:675:25: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’ if (!dev || dev->power.ignore_children) ../drivers/base/power/domain.c: In function ‘rtpm_status_str’: ../drivers/base/power/domain.c:2754:16: error: ‘struct dev_pm_info’ has no member named ‘runtime_error’ if (dev->power.runtime_error) ../drivers/base/power/domain.c:2756:21: error: ‘struct dev_pm_info’ has no member named ‘disable_depth’ else if (dev->power.disable_depth) ../drivers/base/power/domain.c:2758:21: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’ else if (dev->power.runtime_status < ARRAY_SIZE(status_lookup)) ../drivers/base/power/domain.c:2759:31: error: ‘struct dev_pm_info’ has no member named ‘runtime_status’ p = status_lookup[dev->power.runtime_status]; ../drivers/base/power/domain_governor.c: In function ‘default_suspend_ok’: ../drivers/base/power/domain_governor.c:82:17: error: ‘struct dev_pm_info’ has no member named ‘ignore_children’ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-06-14 14:47:48 -07:00
qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-05-25 18:08:24 +02:00
drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Add controller driver for QCOM SoCs that have hardware based shared resource management. The hardware IP known as RSC (Resource State Coordinator) houses multiple Direct Resource Voter (DRV) for different execution levels. A DRV is a unique voter on the state of a shared resource. A Trigger Control Set (TCS) is a bunch of slots that can house multiple resource state requests, that when triggered will issue those requests through an internal bus to the Resource Power Manager Hardened (RPMH) blocks. These hardware blocks are capable of adjusting clocks, voltages, etc. The resource state request from a DRV are aggregated along with state requests from other processors in the SoC and the aggregate value is applied on the resource. Some important aspects of the RPMH communication - - Requests are <addr, value> with some header information - Multiple requests (upto 16) may be sent through a TCS, at a time - Requests in a TCS are sent in sequence - Requests may be fire-n-forget or completion (response expected) - Multiple TCS from the same DRV may be triggered simultaneously - Cannot send a request if another request for the same addr is in progress from the same DRV - When all the requests from a TCS are complete, an IRQ is raised - The IRQ handler needs to clear the TCS before it is available for reuse - TCS configuration is specific to a DRV - Platform drivers may use DRV from different RSCs to make requests Resource state requests made when CPUs are active are called 'active' state requests. Requests made when all the CPUs are powered down (idle state) are called 'sleep' state requests. They are matched by a corresponding 'wake' state requests which puts the resources back in to previously requested active state before resuming any CPU. TCSes are dedicated for each type of requests. Active mode TCSes (AMC) are used to send requests immediately to the resource, while control TCS are used to provide specific information to the controller. Sleep and Wake TCS send sleep and wake requests, after and before the system halt respectively. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-20 18:56:58 +05:30
drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Add controller driver for QCOM SoCs that have hardware based shared resource management. The hardware IP known as RSC (Resource State Coordinator) houses multiple Direct Resource Voter (DRV) for different execution levels. A DRV is a unique voter on the state of a shared resource. A Trigger Control Set (TCS) is a bunch of slots that can house multiple resource state requests, that when triggered will issue those requests through an internal bus to the Resource Power Manager Hardened (RPMH) blocks. These hardware blocks are capable of adjusting clocks, voltages, etc. The resource state request from a DRV are aggregated along with state requests from other processors in the SoC and the aggregate value is applied on the resource. Some important aspects of the RPMH communication - - Requests are <addr, value> with some header information - Multiple requests (upto 16) may be sent through a TCS, at a time - Requests in a TCS are sent in sequence - Requests may be fire-n-forget or completion (response expected) - Multiple TCS from the same DRV may be triggered simultaneously - Cannot send a request if another request for the same addr is in progress from the same DRV - When all the requests from a TCS are complete, an IRQ is raised - The IRQ handler needs to clear the TCS before it is available for reuse - TCS configuration is specific to a DRV - Platform drivers may use DRV from different RSCs to make requests Resource state requests made when CPUs are active are called 'active' state requests. Requests made when all the CPUs are powered down (idle state) are called 'sleep' state requests. They are matched by a corresponding 'wake' state requests which puts the resources back in to previously requested active state before resuming any CPU. TCSes are dedicated for each type of requests. Active mode TCSes (AMC) are used to send requests immediately to the resource, while control TCS are used to provide specific information to the controller. Sleep and Wake TCS send sleep and wake requests, after and before the system halt respectively. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-20 18:56:58 +05:30
cpuidle: qcom_spm: Detach state machine from main SPM handling In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") the SPM driver has been converted to a generic CPUidle driver: that was mainly made to simplify the driver and that was a great accomplishment; Though, at that time, this driver was only applicable to ARM 32-bit SoCs, lacking logic about the handling of newer generation SAW. In preparation for the enablement of SPM features on AArch64/ARM64, split the cpuidle-qcom-spm driver in two: the CPUIdle related state machine (currently used only on ARM SoCs) stays there, while the SPM communication handling lands back in soc/qcom/spm.c and also making sure to not discard the simplifications that were introduced in the aforementioned commit. Since now the "two drivers" are split, the SCM dependency in the main SPM handling is gone and for this reason it was also possible to move the SPM initialization early: this will also make sure that whenever the SAW CPUIdle driver is getting initialized, the SPM driver will be ready to do the job. Please note that the anticipation of the SPM initialization was also done to optimize the boot times on platforms that have their CPU/L2 idle states managed by other means (such as PSCI), while needing SAW initialization for other purposes, like AVS control. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2021-07-29 17:56:05 +02:00
cpuidle: qcom_spm: Detach state machine from main SPM handling In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver") the SPM driver has been converted to a generic CPUidle driver: that was mainly made to simplify the driver and that was a great accomplishment; Though, at that time, this driver was only applicable to ARM 32-bit SoCs, lacking logic about the handling of newer generation SAW. In preparation for the enablement of SPM features on AArch64/ARM64, split the cpuidle-qcom-spm driver in two: the CPUIdle related state machine (currently used only on ARM SoCs) stays there, while the SPM communication handling lands back in soc/qcom/spm.c and also making sure to not discard the simplifications that were introduced in the aforementioned commit. Since now the "two drivers" are split, the SCM dependency in the main SPM handling is gone and for this reason it was also possible to move the SPM initialization early: this will also make sure that whenever the SAW CPUIdle driver is getting initialized, the SPM driver will be ready to do the job. Please note that the anticipation of the SPM initialization was also done to optimize the boot times on platforms that have their CPU/L2 idle states managed by other means (such as PSCI), while needing SAW initialization for other purposes, like AVS control. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210729155609.608159-2-angelogioacchino.delregno@somainline.org
2021-07-29 17:56:05 +02:00