linux/drivers/spi/spi.c

5169 lines
139 KiB

[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Fix per-cpu stats access on 32 bit systems On 32 bit systems, the following kernel BUG is hit: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x18/0x24 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc1-00001-g6ae0aec8a366 #181 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: dump_backtrace from show_stack+0x20/0x24 r7:81024ffd r6:00000000 r5:81024ffd r4:60000013 show_stack from dump_stack_lvl+0x60/0x78 dump_stack_lvl from dump_stack+0x14/0x1c r7:81024ffd r6:80f652de r5:80bec180 r4:819a2500 dump_stack from check_preemption_disabled+0xc8/0xf0 check_preemption_disabled from debug_smp_processor_id+0x18/0x24 r8:8119b7e0 r7:81205534 r6:819f5c00 r5:819f4c00 r4:c083d724 debug_smp_processor_id from __spi_sync+0x78/0x220 __spi_sync from spi_sync+0x34/0x4c r10:bb7bf4e0 r9:c083d724 r8:00000007 r7:81a068c0 r6:822a83c0 r5:c083d724 r4:819f4c00 spi_sync from spi_mem_exec_op+0x338/0x370 r5:000000b4 r4:c083d910 spi_mem_exec_op from spi_nor_read_id+0x98/0xdc r10:bb7bf4e0 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:82358040 r4:819f7c40 spi_nor_read_id from spi_nor_detect+0x38/0x114 r7:82358040 r6:00000000 r5:819f7c40 r4:819f7c40 spi_nor_detect from spi_nor_scan+0x11c/0xbec r10:bb7bf4e0 r9:00000000 r8:00000000 r7:c083da4c r6:00000000 r5:00010101 r4:819f7c40 spi_nor_scan from spi_nor_probe+0x10c/0x2d0 r10:bb7bf4e0 r9:bb7bf4d0 r8:00000000 r7:819f4c00 r6:00000000 r5:00000000 r4:819f7c40 per-cpu access needs to be guarded against preemption. Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David Jander <david@protonic.nl> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220609121334.2984808-1-david@protonic.nl Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-09 14:13:34 +02:00
spi: Fix per-cpu stats access on 32 bit systems On 32 bit systems, the following kernel BUG is hit: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x18/0x24 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc1-00001-g6ae0aec8a366 #181 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: dump_backtrace from show_stack+0x20/0x24 r7:81024ffd r6:00000000 r5:81024ffd r4:60000013 show_stack from dump_stack_lvl+0x60/0x78 dump_stack_lvl from dump_stack+0x14/0x1c r7:81024ffd r6:80f652de r5:80bec180 r4:819a2500 dump_stack from check_preemption_disabled+0xc8/0xf0 check_preemption_disabled from debug_smp_processor_id+0x18/0x24 r8:8119b7e0 r7:81205534 r6:819f5c00 r5:819f4c00 r4:c083d724 debug_smp_processor_id from __spi_sync+0x78/0x220 __spi_sync from spi_sync+0x34/0x4c r10:bb7bf4e0 r9:c083d724 r8:00000007 r7:81a068c0 r6:822a83c0 r5:c083d724 r4:819f4c00 spi_sync from spi_mem_exec_op+0x338/0x370 r5:000000b4 r4:c083d910 spi_mem_exec_op from spi_nor_read_id+0x98/0xdc r10:bb7bf4e0 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:82358040 r4:819f7c40 spi_nor_read_id from spi_nor_detect+0x38/0x114 r7:82358040 r6:00000000 r5:819f7c40 r4:819f7c40 spi_nor_detect from spi_nor_scan+0x11c/0xbec r10:bb7bf4e0 r9:00000000 r8:00000000 r7:c083da4c r6:00000000 r5:00010101 r4:819f7c40 spi_nor_scan from spi_nor_probe+0x10c/0x2d0 r10:bb7bf4e0 r9:bb7bf4d0 r8:00000000 r7:819f4c00 r6:00000000 r5:00000000 r4:819f7c40 per-cpu access needs to be guarded against preemption. Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David Jander <david@protonic.nl> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220609121334.2984808-1-david@protonic.nl Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-09 14:13:34 +02:00
spi: Fix per-cpu stats access on 32 bit systems On 32 bit systems, the following kernel BUG is hit: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id+0x18/0x24 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc1-00001-g6ae0aec8a366 #181 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: dump_backtrace from show_stack+0x20/0x24 r7:81024ffd r6:00000000 r5:81024ffd r4:60000013 show_stack from dump_stack_lvl+0x60/0x78 dump_stack_lvl from dump_stack+0x14/0x1c r7:81024ffd r6:80f652de r5:80bec180 r4:819a2500 dump_stack from check_preemption_disabled+0xc8/0xf0 check_preemption_disabled from debug_smp_processor_id+0x18/0x24 r8:8119b7e0 r7:81205534 r6:819f5c00 r5:819f4c00 r4:c083d724 debug_smp_processor_id from __spi_sync+0x78/0x220 __spi_sync from spi_sync+0x34/0x4c r10:bb7bf4e0 r9:c083d724 r8:00000007 r7:81a068c0 r6:822a83c0 r5:c083d724 r4:819f4c00 spi_sync from spi_mem_exec_op+0x338/0x370 r5:000000b4 r4:c083d910 spi_mem_exec_op from spi_nor_read_id+0x98/0xdc r10:bb7bf4e0 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:82358040 r4:819f7c40 spi_nor_read_id from spi_nor_detect+0x38/0x114 r7:82358040 r6:00000000 r5:819f7c40 r4:819f7c40 spi_nor_detect from spi_nor_scan+0x11c/0xbec r10:bb7bf4e0 r9:00000000 r8:00000000 r7:c083da4c r6:00000000 r5:00010101 r4:819f7c40 spi_nor_scan from spi_nor_probe+0x10c/0x2d0 r10:bb7bf4e0 r9:bb7bf4d0 r8:00000000 r7:819f4c00 r6:00000000 r5:00000000 r4:819f7c40 per-cpu access needs to be guarded against preemption. Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David Jander <david@protonic.nl> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220609121334.2984808-1-david@protonic.nl Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-09 14:13:34 +02:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-13 21:35:22 +02:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: make spi_board_info.modalias a char array Currently, 'modalias' in the spi_device structure is a 'const char *'. The spi_new_device() function fills in the modalias value from a passed in spi_board_info data block. Since it is a pointer copy, the new spi_device remains dependent on the spi_board_info structure after the new spi_device is registered (no other fields in spi_device directly depend on the spi_board_info structure; all of the other data is copied). This causes a problem when dynamically propulating the list of attached SPI devices. For example, in arch/powerpc, the list of SPI devices can be populated from data in the device tree. With the current code, the device tree adapter must kmalloc() a new spi_board_info structure for each new SPI device it finds in the device tree, and there is no simple mechanism in place for keeping track of these allocations. This patch changes modalias from a 'const char *' to a fixed char array. By copying the modalias string instead of referencing it, the dependency on the spi_board_info structure is eliminated and an outside caller does not need to maintain a separate spi_board_info allocation for each device. If searched through the code to the best of my ability for any references to modalias which may be affected by this change and haven't found anything. It has been tested with the lite5200b platform in arch/powerpc. [dbrownell@users.sourceforge.net: cope with linux-next changes: KOBJ_NAME_LEN obliterated, etc] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:55 -07:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Make core DMA mapping functions generate scatterlists We cannot unconditionally use dma_map_single() to map data for use with SPI since transfers may exceed a page and virtual addresses may not be provided with physically contiguous pages. Further, addresses allocated using vmalloc() need to be mapped differently to other addresses. Currently only the MXS driver handles all this, a few drivers do handle the possibility that buffers may not be physically contiguous which is the main potential problem but many don't even do that. Factoring this out into the core will make it easier for drivers to do a good job so if the driver is using the core DMA code then generate a scatterlist instead of mapping to a single address so do that. This code is mainly based on a combination of the existing code in the MXS and PXA2xx drivers. In future we should be able to extend it to allow the core to concatenate adjacent transfers if they are compatible, improving performance. Currently for simplicity clients are not allowed to use the scatterlist when they do DMA mapping, in the future the existing single address mappings will be replaced with use of the scatterlist most likely as part of pre-verifying transfers. This change makes it mandatory to use scatterlists when using the core DMA mapping so update the s3c64xx driver to do this when used with dmaengine. Doing so makes the code more ugly but it is expected that the old s3c-dma code can be removed very soon. Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-02 13:47:47 +00:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
This tree adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree. When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c, which can be resolved via: sched_set_fifo(ctlr->kworker_task); Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8pPQIRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1j0Jw/+LlSyX6gD2ATy3cizGL7DFPZogD5MVKTb IXbhXH/ACpuPQlBe1+haRLbJj6XfXqbOlAleVKt7eh+jZ1jYjC972RCSTO4566mJ 0v8Iy9kkEeb2TDbYx1H3bnk78lf85t0CB+sCzyKUYFuTrXU04eRj7MtN3vAQyRQU xJg83x/sT5DGdDTP50sL7lpbwk3INWkD0aDCJEaO/a9yHElMsTZiZBKoXxN/s30o FsfzW56jqtng771H2bo8ERN7+abwJg10crQU5mIaLhacNMETuz0NZ/f8fY/fydCL Ju8HAdNKNXyphWkAOmixQuyYtWKe2/GfbHg8hld0jmpwxkOSTgZjY+pFcv7/w306 g2l1TPOt8e1n5jbfnY3eig+9Kr8y0qHkXPfLfgRqKwMMaOqTTYixEzj+NdxEIRX9 Kr7oFAv6VEFfXGSpb5L1qyjIGVgQ5/JE/p3OC3GHEsw5VKiy5yjhNLoSmSGzdS61 1YurVvypSEUAn3DqTXgeGX76f0HH365fIKqmbFrUWxliF+YyflMhtrj2JFtejGzH Md3RgAzxusE9S6k3gw1ev4byh167bPBbY8jz0w3Gd7IBRKy9vo92h6ZRYIl6xeoC BU2To1IhCAydIr6hNsIiCSDTgiLbsYQzPuVVovUxNh+l1ZvKV2X+csEHhs8oW4pr 4BRU7dKL2NE= =/7JH -----END PGP SIGNATURE----- Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-06 11:55:43 -07:00
spi: add defer_optimize_message controller flag Adding spi_optimize_message() broke the spi-mux driver because it calls spi_async() from it's transfer_one_message() callback. This resulted in passing an incorrectly optimized message to the controller. For example, if the underlying controller has an optimize_message() callback, this would have not been called and can cause a crash when the underlying controller driver tries to transfer the message. Also, since the spi-mux driver swaps out the controller pointer by replacing msg->spi, __spi_unoptimize_message() was being called with a different controller than the one used in __spi_optimize_message(). This could cause a crash when attempting to free the message resources when __spi_unoptimize_message() is called in spi_finalize_current_message() since it is being called with a controller that did not allocate the resources. This is fixed by adding a defer_optimize_message flag for controllers. This flag causes all of the spi_[maybe_][un]optimize_message() calls to be a no-op (other than attaching a pointer to the spi device to the message). This allows the spi-mux driver to pass an unmodified message to spi_async() in spi_mux_transfer_one_message() after the spi device has been swapped out. This causes __spi_optimize_message() and __spi_unoptimize_message() to be called only once per message and with the correct/same controller in each case. Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/ Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/ Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-08 20:05:29 -05:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
kthread: kthread worker API cleanup A good practice is to prefix the names of functions by the name of the subsystem. The kthread worker API is a mix of classic kthreads and workqueues. Each worker has a dedicated kthread. It runs a generic function that process queued works. It is implemented as part of the kthread subsystem. This patch renames the existing kthread worker API to use the corresponding name from the workqueues API prefixed by kthread_: __init_kthread_worker() -> __kthread_init_worker() init_kthread_worker() -> kthread_init_worker() init_kthread_work() -> kthread_init_work() insert_kthread_work() -> kthread_insert_work() queue_kthread_work() -> kthread_queue_work() flush_kthread_work() -> kthread_flush_work() flush_kthread_worker() -> kthread_flush_worker() Note that the names of DEFINE_KTHREAD_WORK*() macros stay as they are. It is common that the "DEFINE_" prefix has precedence over the subsystem names. Note that INIT() macros and init() functions use different naming scheme. There is no good solution. There are several reasons for this solution: + "init" in the function names stands for the verb "initialize" aka "initialize worker". While "INIT" in the macro names stands for the noun "INITIALIZER" aka "worker initializer". + INIT() macros are used only in DEFINE() macros + init() functions are used close to the other kthread() functions. It looks much better if all the functions use the same scheme. + There will be also kthread_destroy_worker() that will be used close to kthread_cancel_work(). It is related to the init() function. Again it looks better if all functions use the same naming scheme. + there are several precedents for such init() function names, e.g. amd_iommu_init_device(), free_area_init_node(), jump_label_init_type(), regmap_init_mmio_clk(), + It is not an argument but it was inconsistent even before. [arnd@arndb.de: fix linux-next merge conflict] Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 13:55:20 -07:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-11-11 22:41:56 +01:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
spi/acpi: enumerate all SPI slaves in the namespace Currently, the ACPI enumeration that takes place when registering a SPI master only considers immediate child devices in the ACPI namespace, rather than checking the ResourceSource field in the SpiSerialBus() resource descriptor. This is incorrect: SPI slaves could reside anywhere in the ACPI namespace, and so we should enumerate the entire namespace and look for any device that refers to the newly registered SPI master in its resource descriptor. So refactor the existing code and use a lookup structure so that allocating the SPI device structure is deferred until we have identified the device as an actual child of the controller. This approach is loosely based on the way the I2C subsystem handles ACPI enumeration. Note that Apple x86 hardware does not rely on SpiSerialBus() resources in _CRS but uses nested devices below the controller's device node in the ACPI namespace, with a special set of device properties. This means we have to take care to only parse those properties for device nodes that are direct children of the controller node. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: linux-spi@vger.kernel.org Cc: broonie@kernel.org Cc: andy.shevchenko@gmail.com Cc: masahisa.kojima@linaro.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Cc: linux-acpi@vger.kernel.org Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30 13:16:34 +02:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
spi: Optionally use GPIO descriptors for CS GPIOs This augments the SPI core to optionally use GPIO descriptors for chip select on a per-master-driver opt-in basis. Drivers using this will rely on the SPI core to look up GPIO descriptors associated with the device, such as when using device tree or board files with GPIO descriptor tables. When getting descriptors from the device tree, this will in turn activate the code in gpiolib that was added in commit 6953c57ab172 ("gpio: of: Handle SPI chipselect legacy bindings") which means that these descriptors are aware of the active low semantics that is the default for SPI CS GPIO lines and we can assume that all of these are "active high" and thus assign SPI_CS_HIGH to all CS lines on the DT path. The previously used gpio_set_value() would call down into gpiod_set_raw_value() and ignore the polarity inversion semantics. It seems like many drivers go to great lengths to set up the CS GPIO line as non-asserted, respecting SPI_CS_HIGH. We pull this out of the SPI drivers and into the core, and by simply requesting the line as GPIOD_OUT_LOW when retrieveing it from the device and relying on the gpiolib to handle any inversion semantics. This way a lot of code can be simplified and removed in each converted driver. The end goal after dealing with each driver in turn, is to delete the non-descriptor path (of_spi_register_master() for example) and let the core deal with only descriptors. The different SPI drivers have complex interactions with the core so we cannot simply change them all over, we need to use a stepwise, bisectable approach so that each driver can be converted and fixed in isolation. This patch has the intended side effect of adding support for ACPI GPIOs as it starts relying on gpiod_get_*() to get the GPIO handle associated with the device. Cc: Linuxarm <linuxarm@huawei.com> Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Fangjian (Turing) <f.fangjian@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-07 16:51:50 +01:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Add multi-cs memories support in SPI core AMD-Xilinx GQSPI controller has two advanced mode that allows the controller to consider two flashes as one single device. One of these two mode is the parallel mode in which each byte of data is stored in both devices, the even bits in the lower flash & the odd bits in the upper flash. The byte split is automatically handled by the QSPI controller. The other mode is the stacked mode in which both the flashes share the same SPI bus but each of the device contain half of the data. In this mode, the controller does not follow CS requests but instead internally wires the two CS levels with the value of the most significant address bit. For supporting both these modes SPI core need to be updated for providing multiple CS for a single SPI device. For adding multi CS support the SPI device need to be aware of all the CS values. So, the "chip_select" member in the spi_device structure is now an array that holds all the CS values. spi_device structure now has a "cs_index_mask" member. This acts as an index to the chip_select array. If nth bit of spi->cs_index_mask is set then the driver would assert spi->chip_select[n]. In parallel mode all the chip selects are asserted/de-asserted simultaneously and each byte of data is stored in both devices, the even bits in one, the odd bits in the other. The split is automatically handled by the GQSPI controller. The GQSPI controller supports a maximum of two flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is added in the spi controller flags, through ctlr->flags the spi core will make sure that the controller is capable of handling multiple chip selects at once. For supporting multiple CS via GPIO the cs_gpiod member of the spi_device structure is now an array that holds the gpio descriptor for each chipselect. CS GPIO is not tested on our hardware, but it has been tested by @Stefan https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Tested-by: Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-11-25 14:51:30 +05:30
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Introduce device-managed SPI controller allocation SPI driver probing currently comprises two steps, whereas removal comprises only one step: spi_alloc_master() spi_register_controller() spi_unregister_controller() That's because spi_unregister_controller() calls device_unregister() instead of device_del(), thereby releasing the reference on the spi_controller which was obtained by spi_alloc_master(). An SPI driver's private data is contained in the same memory allocation as the spi_controller struct. Thus, once spi_unregister_controller() has been called, the private data is inaccessible. But some drivers need to access it after spi_unregister_controller() to perform further teardown steps. Introduce devm_spi_alloc_master() and devm_spi_alloc_slave(), which release a reference on the spi_controller struct only after the driver has unbound, thereby keeping the memory allocation accessible. Change spi_unregister_controller() to not release a reference if the spi_controller was allocated by one of these new devm functions. The present commit is small enough to be backportable to stable. It allows fixing drivers which use the private data in their ->remove() hook after it's been freed. It also allows fixing drivers which neglect to release a reference on the spi_controller in the probe error path. Long-term, most SPI drivers shall be moved over to the devm functions introduced herein. The few that can't shall be changed in a treewide commit to explicitly release the last reference on the controller. That commit shall amend spi_unregister_controller() to no longer release a reference, thereby completing the migration. As a result, the behaviour will be less surprising and more consistent with subsystems such as IIO, which also includes the private data in the allocation of the generic iio_dev struct, but calls device_del() in iio_device_unregister(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/272bae2ef08abd21388c98e23729886663d19192.1605121038.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11 20:07:10 +01:00
spi: Fix unregistration of controller with fixed SPI bus number Commit 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) ceased to unregister SPI buses with fixed bus numbers. Moreover this is visible only if CONFIG_SPI_DEBUG=y is set or when trying to re-register the same SPI controller. rmmod spi_pxa2xx_platform (with CONFIG_SPI_DEBUG=y): [ 26.788362] spi_master spi1: attempting to delete unregistered controller [spi1] modprobe spi_pxa2xx_platform: [ 37.883137] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:19.0/pxa2xx-spi.12/spi_master/spi1' [ 37.894984] CPU: 1 PID: 1467 Comm: modprobe Not tainted 4.16.0-rc4+ #21 [ 37.902384] Call Trace: ... [ 38.122680] kobject_add_internal failed for spi1 with -EEXIST, don't try to register things with the same name in the same directory. [ 38.136154] WARNING: CPU: 1 PID: 1467 at lib/kobject.c:238 kobject_add_internal+0x2a5/0x2f0 ... [ 38.513817] pxa2xx-spi pxa2xx-spi.12: problem registering spi master [ 38.521036] pxa2xx-spi: probe of pxa2xx-spi.12 failed with error -17 Fix this by not returning immediately from spi_unregister_controller() if idr_find() doesn't find controller with given ID/bus number. It finds only those controllers that were registered with dynamic SPI bus numbers. Only conditional cleanup between dynamic and fixed bus numbers is to remove allocated IDR. Fixes: 9b61e302210e (spi: Pick spi bus number from Linux idr or spi alias) Cc: stable@vger.kernel.org Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-20 10:27:50 +02:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Reintroduce spi_set_cs_timing() commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), removed the method as noboby used it. Nobody used it probably because some SPI controllers use some default large cs-setup time that covers the usual cs-setup time required by the spi devices. There are though SPI controllers that have a smaller granularity for the cs-setup time and their default value can't fulfill the spi device requirements. That's the case for the at91 QSPI IPs where the default cs-setup time is half of the QSPI clock period. This was observed when using an sst26vf064b SPI NOR flash which needs a spi-cs-setup-ns = <7>; in order to be operated close to its maximum 104 MHz frequency. Call spi_set_cs_timing() in spi_setup() just before calling spi_set_cs(), as the latter needs the CS timings already set. If spi->controller->set_cs_timing is not set, the method will return 0. There's no functional impact expected for the existing drivers. Even if the spi-mt65xx.c and spi-tegra114.c drivers set the set_cs_timing method, there's no user for them as of now. The only tested user of this support will be a SPI NOR flash that comunicates with the Atmel QSPI controller for which the support follows in the next patches. One will notice that this support is a bit different from the one that was removed in commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), because this patch adapts to the changes done after the removal: the move of the cs delays to the spi device, the retirement of the lelgacy GPIO handling. The mutex handling was removed from spi_set_cs_timing() because we now always call spi_set_cs_timing() in spi_setup(), which already handles the spi->controller->io_mutex, so use the mutex handling from spi_setup(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20221117105249.115649-4-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-17 12:52:44 +02:00
spi: Reintroduce spi_set_cs_timing() commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), removed the method as noboby used it. Nobody used it probably because some SPI controllers use some default large cs-setup time that covers the usual cs-setup time required by the spi devices. There are though SPI controllers that have a smaller granularity for the cs-setup time and their default value can't fulfill the spi device requirements. That's the case for the at91 QSPI IPs where the default cs-setup time is half of the QSPI clock period. This was observed when using an sst26vf064b SPI NOR flash which needs a spi-cs-setup-ns = <7>; in order to be operated close to its maximum 104 MHz frequency. Call spi_set_cs_timing() in spi_setup() just before calling spi_set_cs(), as the latter needs the CS timings already set. If spi->controller->set_cs_timing is not set, the method will return 0. There's no functional impact expected for the existing drivers. Even if the spi-mt65xx.c and spi-tegra114.c drivers set the set_cs_timing method, there's no user for them as of now. The only tested user of this support will be a SPI NOR flash that comunicates with the Atmel QSPI controller for which the support follows in the next patches. One will notice that this support is a bit different from the one that was removed in commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), because this patch adapts to the changes done after the removal: the move of the cs delays to the spi device, the retirement of the lelgacy GPIO handling. The mutex handling was removed from spi_set_cs_timing() because we now always call spi_set_cs_timing() in spi_setup(), which already handles the spi->controller->io_mutex, so use the mutex handling from spi_setup(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20221117105249.115649-4-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-17 12:52:44 +02:00
spi: Enable controllers to extend the SPI protocol with MOSI idle configuration The behavior of an SPI controller data output line (SDO or MOSI or COPI (Controller Output Peripheral Input) for disambiguation) is usually not specified when the controller is not clocking out data on SCLK edges. However, there do exist SPI peripherals that require specific MOSI line state when data is not being clocked out of the controller. Conventional SPI controllers may set the MOSI line on SCLK edges then bring it low when no data is going out or leave the line the state of the last transfer bit. More elaborated controllers are capable to set the MOSI idle state according to different configurable levels and thus are more suitable for interfacing with demanding peripherals. Add SPI mode bits to allow peripherals to request explicit MOSI idle state when needed. When supporting a particular MOSI idle configuration, the data output line state is expected to remain at the configured level when the controller is not clocking out data. When a device that needs a specific MOSI idle state is identified, its driver should request the MOSI idle configuration by setting the proper SPI mode bit. Acked-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Tested-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Link: https://patch.msgid.link/9802160b5e5baed7f83ee43ac819cb757a19be55.1720810545.git.marcelo.schmitt@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-12 16:20:36 -03:00
spi: Take the SPI IO-mutex in the spi_setup() method I've discovered that due to the recent commit 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") a concurrent usage of the spidev devices with different chip-selects causes the "SPI transfer timed out" error. The root cause of the problem has turned to be in a race condition of the SPI-transfer execution procedure and the spi_setup() method being called at the same time. In particular in calling the spi_set_cs(false) while there is an SPI-transfer being executed. In my case due to the commit cited above all CSs get to be switched off by calling the spi_setup() for /dev/spidev0.1 while there is an concurrent SPI-transfer execution performed on /dev/spidev0.0. Of course a situation of the spi_setup() being called while there is an SPI-transfer being executed for two different SPI peripheral devices of the same controller may happen not only for the spidev driver, but for instance for MMC SPI + some another device, or spi_setup() being called from an SPI-peripheral probe method while some other device has already been probed and is being used by a corresponding driver... Of course I could have provided a fix affecting the DW APB SSI driver only, for instance, by creating a mutual exclusive access to the set_cs callback and setting/clearing only the bit responsible for the corresponding chip-select. But after a short research I've discovered that the problem most likely affects a lot of the other drivers: - drivers/spi/spi-sun4i.c - RMW the chip-select register; - drivers/spi/spi-rockchip.c - RMW the chip-select register; - drivers/spi/spi-qup.c - RMW a generic force-CS flag in a CSR. - drivers/spi/spi-sifive.c - set a generic CS-mode flag in a CSR. - drivers/spi/spi-bcm63xx-hsspi.c - uses an internal mutex to serialize the bus config changes, but still isn't protected from the race condition described above; - drivers/spi/spi-geni-qcom.c - RMW a chip-select internal flag and set the CS state in HW; - drivers/spi/spi-orion.c - RMW a chip-select register; - drivers/spi/spi-cadence.c - RMW a chip-select register; - drivers/spi/spi-armada-3700.c - RMW a chip-select register; - drivers/spi/spi-lantiq-ssc.c - overwrites the chip-select register; - drivers/spi/spi-sun6i.c - RMW a chip-select register; - drivers/spi/spi-synquacer.c - RMW a chip-select register; - drivers/spi/spi-altera.c - directly sets the chip-select state; - drivers/spi/spi-omap2-mcspi.c - RMW an internally cached CS state and writes it to HW; - drivers/spi/spi-mt65xx.c - RMW some CSR; - drivers/spi/spi-jcore.c - directly sets the chip-selects state; - drivers/spi/spi-mt7621.c - RMW a chip-select register; I could have missed some drivers, but a scale of the problem is obvious. As you can see most of the drivers perform an unprotected Read-modify-write chip-select register modification in the set_cs callback. Seeing the spi_setup() function is calling the spi_set_cs() and it can be executed concurrently with SPI-transfers exec procedure, which also calls spi_set_cs() in the SPI core spi_transfer_one_message() method, the race condition of the register modification turns to be obvious. To sum up the problem denoted above affects each driver for a controller having more than one chip-select lane and which: 1) performs the RMW to some CS-related register with no serialization; 2) directly disables any CS on spi_set_cs(dev, false). * the later is the case of the DW APB SSI driver. The controllers which equipped with a single CS theoretically can also experience the problem, but in practice will not since normally the spi_setup() isn't called concurrently with the SPI-transfers executed on the same SPI peripheral device. In order to generically fix the denoted bug I'd suggest to serialize an access to the controller IO by taking the IO mutex in the spi_setup() callback. The mutex is held while there is an SPI communication going on on the SPI-bus of the corresponding SPI-controller. So calling the spi_setup() method and disabling/updating the CS state within it would be safe while there is no any SPI-transfers being executed. Also note I suppose it would be safer to protect the spi_controller->setup() callback invocation too, seeing some of the SPI-controller drivers update a HW state in there. Fixes: 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201117094517.5654-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17 12:45:17 +03:00
spi: Reintroduce spi_set_cs_timing() commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), removed the method as noboby used it. Nobody used it probably because some SPI controllers use some default large cs-setup time that covers the usual cs-setup time required by the spi devices. There are though SPI controllers that have a smaller granularity for the cs-setup time and their default value can't fulfill the spi device requirements. That's the case for the at91 QSPI IPs where the default cs-setup time is half of the QSPI clock period. This was observed when using an sst26vf064b SPI NOR flash which needs a spi-cs-setup-ns = <7>; in order to be operated close to its maximum 104 MHz frequency. Call spi_set_cs_timing() in spi_setup() just before calling spi_set_cs(), as the latter needs the CS timings already set. If spi->controller->set_cs_timing is not set, the method will return 0. There's no functional impact expected for the existing drivers. Even if the spi-mt65xx.c and spi-tegra114.c drivers set the set_cs_timing method, there's no user for them as of now. The only tested user of this support will be a SPI NOR flash that comunicates with the Atmel QSPI controller for which the support follows in the next patches. One will notice that this support is a bit different from the one that was removed in commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), because this patch adapts to the changes done after the removal: the move of the cs delays to the spi device, the retirement of the lelgacy GPIO handling. The mutex handling was removed from spi_set_cs_timing() because we now always call spi_set_cs_timing() in spi_setup(), which already handles the spi->controller->io_mutex, so use the mutex handling from spi_setup(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20221117105249.115649-4-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-17 12:52:44 +02:00
spi: Reintroduce spi_set_cs_timing() commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), removed the method as noboby used it. Nobody used it probably because some SPI controllers use some default large cs-setup time that covers the usual cs-setup time required by the spi devices. There are though SPI controllers that have a smaller granularity for the cs-setup time and their default value can't fulfill the spi device requirements. That's the case for the at91 QSPI IPs where the default cs-setup time is half of the QSPI clock period. This was observed when using an sst26vf064b SPI NOR flash which needs a spi-cs-setup-ns = <7>; in order to be operated close to its maximum 104 MHz frequency. Call spi_set_cs_timing() in spi_setup() just before calling spi_set_cs(), as the latter needs the CS timings already set. If spi->controller->set_cs_timing is not set, the method will return 0. There's no functional impact expected for the existing drivers. Even if the spi-mt65xx.c and spi-tegra114.c drivers set the set_cs_timing method, there's no user for them as of now. The only tested user of this support will be a SPI NOR flash that comunicates with the Atmel QSPI controller for which the support follows in the next patches. One will notice that this support is a bit different from the one that was removed in commit 4ccf359849ce ("spi: remove spi_set_cs_timing()"), because this patch adapts to the changes done after the removal: the move of the cs delays to the spi device, the retirement of the lelgacy GPIO handling. The mutex handling was removed from spi_set_cs_timing() because we now always call spi_set_cs_timing() in spi_setup(), which already handles the spi->controller->io_mutex, so use the mutex handling from spi_setup(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20221117105249.115649-4-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-17 12:52:44 +02:00
spi: Take the SPI IO-mutex in the spi_setup() method I've discovered that due to the recent commit 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") a concurrent usage of the spidev devices with different chip-selects causes the "SPI transfer timed out" error. The root cause of the problem has turned to be in a race condition of the SPI-transfer execution procedure and the spi_setup() method being called at the same time. In particular in calling the spi_set_cs(false) while there is an SPI-transfer being executed. In my case due to the commit cited above all CSs get to be switched off by calling the spi_setup() for /dev/spidev0.1 while there is an concurrent SPI-transfer execution performed on /dev/spidev0.0. Of course a situation of the spi_setup() being called while there is an SPI-transfer being executed for two different SPI peripheral devices of the same controller may happen not only for the spidev driver, but for instance for MMC SPI + some another device, or spi_setup() being called from an SPI-peripheral probe method while some other device has already been probed and is being used by a corresponding driver... Of course I could have provided a fix affecting the DW APB SSI driver only, for instance, by creating a mutual exclusive access to the set_cs callback and setting/clearing only the bit responsible for the corresponding chip-select. But after a short research I've discovered that the problem most likely affects a lot of the other drivers: - drivers/spi/spi-sun4i.c - RMW the chip-select register; - drivers/spi/spi-rockchip.c - RMW the chip-select register; - drivers/spi/spi-qup.c - RMW a generic force-CS flag in a CSR. - drivers/spi/spi-sifive.c - set a generic CS-mode flag in a CSR. - drivers/spi/spi-bcm63xx-hsspi.c - uses an internal mutex to serialize the bus config changes, but still isn't protected from the race condition described above; - drivers/spi/spi-geni-qcom.c - RMW a chip-select internal flag and set the CS state in HW; - drivers/spi/spi-orion.c - RMW a chip-select register; - drivers/spi/spi-cadence.c - RMW a chip-select register; - drivers/spi/spi-armada-3700.c - RMW a chip-select register; - drivers/spi/spi-lantiq-ssc.c - overwrites the chip-select register; - drivers/spi/spi-sun6i.c - RMW a chip-select register; - drivers/spi/spi-synquacer.c - RMW a chip-select register; - drivers/spi/spi-altera.c - directly sets the chip-select state; - drivers/spi/spi-omap2-mcspi.c - RMW an internally cached CS state and writes it to HW; - drivers/spi/spi-mt65xx.c - RMW some CSR; - drivers/spi/spi-jcore.c - directly sets the chip-selects state; - drivers/spi/spi-mt7621.c - RMW a chip-select register; I could have missed some drivers, but a scale of the problem is obvious. As you can see most of the drivers perform an unprotected Read-modify-write chip-select register modification in the set_cs callback. Seeing the spi_setup() function is calling the spi_set_cs() and it can be executed concurrently with SPI-transfers exec procedure, which also calls spi_set_cs() in the SPI core spi_transfer_one_message() method, the race condition of the register modification turns to be obvious. To sum up the problem denoted above affects each driver for a controller having more than one chip-select lane and which: 1) performs the RMW to some CS-related register with no serialization; 2) directly disables any CS on spi_set_cs(dev, false). * the later is the case of the DW APB SSI driver. The controllers which equipped with a single CS theoretically can also experience the problem, but in practice will not since normally the spi_setup() isn't called concurrently with the SPI-transfers executed on the same SPI peripheral device. In order to generically fix the denoted bug I'd suggest to serialize an access to the controller IO by taking the IO mutex in the spi_setup() callback. The mutex is held while there is an SPI communication going on on the SPI-bus of the corresponding SPI-controller. So calling the spi_setup() method and disabling/updating the CS state within it would be safe while there is no any SPI-transfers being executed. Also note I suppose it would be safer to protect the spi_controller->setup() callback invocation too, seeing some of the SPI-controller drivers update a HW state in there. Fixes: 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201117094517.5654-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17 12:45:17 +03:00
spi: Take the SPI IO-mutex in the spi_setup() method I've discovered that due to the recent commit 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") a concurrent usage of the spidev devices with different chip-selects causes the "SPI transfer timed out" error. The root cause of the problem has turned to be in a race condition of the SPI-transfer execution procedure and the spi_setup() method being called at the same time. In particular in calling the spi_set_cs(false) while there is an SPI-transfer being executed. In my case due to the commit cited above all CSs get to be switched off by calling the spi_setup() for /dev/spidev0.1 while there is an concurrent SPI-transfer execution performed on /dev/spidev0.0. Of course a situation of the spi_setup() being called while there is an SPI-transfer being executed for two different SPI peripheral devices of the same controller may happen not only for the spidev driver, but for instance for MMC SPI + some another device, or spi_setup() being called from an SPI-peripheral probe method while some other device has already been probed and is being used by a corresponding driver... Of course I could have provided a fix affecting the DW APB SSI driver only, for instance, by creating a mutual exclusive access to the set_cs callback and setting/clearing only the bit responsible for the corresponding chip-select. But after a short research I've discovered that the problem most likely affects a lot of the other drivers: - drivers/spi/spi-sun4i.c - RMW the chip-select register; - drivers/spi/spi-rockchip.c - RMW the chip-select register; - drivers/spi/spi-qup.c - RMW a generic force-CS flag in a CSR. - drivers/spi/spi-sifive.c - set a generic CS-mode flag in a CSR. - drivers/spi/spi-bcm63xx-hsspi.c - uses an internal mutex to serialize the bus config changes, but still isn't protected from the race condition described above; - drivers/spi/spi-geni-qcom.c - RMW a chip-select internal flag and set the CS state in HW; - drivers/spi/spi-orion.c - RMW a chip-select register; - drivers/spi/spi-cadence.c - RMW a chip-select register; - drivers/spi/spi-armada-3700.c - RMW a chip-select register; - drivers/spi/spi-lantiq-ssc.c - overwrites the chip-select register; - drivers/spi/spi-sun6i.c - RMW a chip-select register; - drivers/spi/spi-synquacer.c - RMW a chip-select register; - drivers/spi/spi-altera.c - directly sets the chip-select state; - drivers/spi/spi-omap2-mcspi.c - RMW an internally cached CS state and writes it to HW; - drivers/spi/spi-mt65xx.c - RMW some CSR; - drivers/spi/spi-jcore.c - directly sets the chip-selects state; - drivers/spi/spi-mt7621.c - RMW a chip-select register; I could have missed some drivers, but a scale of the problem is obvious. As you can see most of the drivers perform an unprotected Read-modify-write chip-select register modification in the set_cs callback. Seeing the spi_setup() function is calling the spi_set_cs() and it can be executed concurrently with SPI-transfers exec procedure, which also calls spi_set_cs() in the SPI core spi_transfer_one_message() method, the race condition of the register modification turns to be obvious. To sum up the problem denoted above affects each driver for a controller having more than one chip-select lane and which: 1) performs the RMW to some CS-related register with no serialization; 2) directly disables any CS on spi_set_cs(dev, false). * the later is the case of the DW APB SSI driver. The controllers which equipped with a single CS theoretically can also experience the problem, but in practice will not since normally the spi_setup() isn't called concurrently with the SPI-transfers executed on the same SPI peripheral device. In order to generically fix the denoted bug I'd suggest to serialize an access to the controller IO by taking the IO mutex in the spi_setup() callback. The mutex is held while there is an SPI communication going on on the SPI-bus of the corresponding SPI-controller. So calling the spi_setup() method and disabling/updating the CS state within it would be safe while there is no any SPI-transfers being executed. Also note I suppose it would be safer to protect the spi_controller->setup() callback invocation too, seeing some of the SPI-controller drivers update a HW state in there. Fixes: 49d7d695ca4b ("spi: dw: Explicitly de-assert CS on SPI transfer completion") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201117094517.5654-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17 12:45:17 +03:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi: support inter-word delay requirement for devices Some devices are slow and cannot keep up with the SPI bus and therefore require a short delay between words of the SPI transfer. The example of this that I'm looking at is a SAMA5D2 with a minimum SPI clock of 400kHz talking to an AVR-based SPI slave. The AVR cannot put bytes on the bus fast enough to keep up with the SoC's SPI controller even at the lowest bus speed. This patch introduces the ability to specify a required inter-word delay for SPI devices. It is up to the controller driver to configure itself accordingly in order to introduce the requested delay. Note that, for spi_transfer, there is already a field word_delay that provides similar functionality. This field, however, is specified in clock cycles (and worse, SPI controller cycles, not SCK cycles); that makes this value dependent on the master clock instead of the device clock for which the delay is intended to provide some relief. This patch leaves this old word_delay in place and provides a time-based word_delay_us alongside it; the new field fits in the struct padding so struct size is constant. There is only one in-kernel user of the word_delay field and presumably that driver could be reworked to use the time-based value instead. The time-based delay is limited to 8 bits as these delays are intended to be short. The SAMA5D2 that I've tested this on limits delays to a maximum of ~100us, which is already many word-transfer periods even at the minimum transfer speed supported by the controller. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Mark Brown <broonie@kernel.org> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: linux-spi@vger.kernel.org CC: devicetree@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-30 09:40:04 +01:00
spi: Add support for Double Transfer Rate (DTR) mode Introduce support for protocol drivers to specify whether a transfer should use single or dual transfer mode. Currently, the SPI controller cannot determine this information from the user, leading to potential limitations in transfer capabilities. Add a new field `dtr_mode` in the `spi_transfer` structure. The `dtr_mode` field allows protocol drivers to indicate if Double Transfer Rate (DTR) mode is supported for a given transfer. When `dtr_mode` is set to true, the SPI controller will use DTR mode; otherwise, it will default to single transfer mode. Introduce another field `dtr_caps` to indicate if the QSPI controller is capable of supporting DTR mode (SDR and DDR). By default, both `dtr_caps` and `dtr_mode` will be false. These flags manage the QSPI controller's DTR mode capabilities within the SPI framework. The QSPI controller driver uses these flags to configure single or double transfer rates using the controller register. The existing spi-mem driver helps configure the DTR mode but is limited to memory devices. There is no support available to set DTR mode for non-memory devices, e.g., touch or any generic SPI sensor. This change is backward compatible and doesn't break existing SPI or QSPI drivers. Changes include: - Addition of `dtr_mode` and `dtr_caps` fields in the `spi_transfer` structure. - Documentation updates to reflect the new `dtr_mode` and `dtr_caps` fields. Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Link: https://patch.msgid.link/20250404135427.313825-1-quic_msavaliy@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-04-04 19:24:27 +05:30
spi: support inter-word delay requirement for devices Some devices are slow and cannot keep up with the SPI bus and therefore require a short delay between words of the SPI transfer. The example of this that I'm looking at is a SAMA5D2 with a minimum SPI clock of 400kHz talking to an AVR-based SPI slave. The AVR cannot put bytes on the bus fast enough to keep up with the SoC's SPI controller even at the lowest bus speed. This patch introduces the ability to specify a required inter-word delay for SPI devices. It is up to the controller driver to configure itself accordingly in order to introduce the requested delay. Note that, for spi_transfer, there is already a field word_delay that provides similar functionality. This field, however, is specified in clock cycles (and worse, SPI controller cycles, not SCK cycles); that makes this value dependent on the master clock instead of the device clock for which the delay is intended to provide some relief. This patch leaves this old word_delay in place and provides a time-based word_delay_us alongside it; the new field fits in the struct padding so struct size is constant. There is only one in-kernel user of the word_delay field and presumably that driver could be reworked to use the time-based value instead. The time-based delay is limited to 8 bits as these delays are intended to be short. The SAMA5D2 that I've tested this on limits delays to a maximum of ~100us, which is already many word-transfer periods even at the minimum transfer speed supported by the controller. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> CC: Mark Brown <broonie@kernel.org> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: linux-spi@vger.kernel.org CC: devicetree@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-30 09:40:04 +01:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi: add defer_optimize_message controller flag Adding spi_optimize_message() broke the spi-mux driver because it calls spi_async() from it's transfer_one_message() callback. This resulted in passing an incorrectly optimized message to the controller. For example, if the underlying controller has an optimize_message() callback, this would have not been called and can cause a crash when the underlying controller driver tries to transfer the message. Also, since the spi-mux driver swaps out the controller pointer by replacing msg->spi, __spi_unoptimize_message() was being called with a different controller than the one used in __spi_optimize_message(). This could cause a crash when attempting to free the message resources when __spi_unoptimize_message() is called in spi_finalize_current_message() since it is being called with a controller that did not allocate the resources. This is fixed by adding a defer_optimize_message flag for controllers. This flag causes all of the spi_[maybe_][un]optimize_message() calls to be a no-op (other than attaching a pointer to the spi device to the message). This allows the spi-mux driver to pass an unmodified message to spi_async() in spi_mux_transfer_one_message() after the spi device has been swapped out. This causes __spi_optimize_message() and __spi_unoptimize_message() to be called only once per message and with the correct/same controller in each case. Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/ Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/ Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-08 20:05:29 -05:00
spi: add defer_optimize_message controller flag Adding spi_optimize_message() broke the spi-mux driver because it calls spi_async() from it's transfer_one_message() callback. This resulted in passing an incorrectly optimized message to the controller. For example, if the underlying controller has an optimize_message() callback, this would have not been called and can cause a crash when the underlying controller driver tries to transfer the message. Also, since the spi-mux driver swaps out the controller pointer by replacing msg->spi, __spi_unoptimize_message() was being called with a different controller than the one used in __spi_optimize_message(). This could cause a crash when attempting to free the message resources when __spi_unoptimize_message() is called in spi_finalize_current_message() since it is being called with a controller that did not allocate the resources. This is fixed by adding a defer_optimize_message flag for controllers. This flag causes all of the spi_[maybe_][un]optimize_message() calls to be a no-op (other than attaching a pointer to the spi device to the message). This allows the spi-mux driver to pass an unmodified message to spi_async() in spi_mux_transfer_one_message() after the spi device has been swapped out. This causes __spi_optimize_message() and __spi_unoptimize_message() to be called only once per message and with the correct/same controller in each case. Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/ Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/ Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-08 20:05:29 -05:00
spi: add defer_optimize_message controller flag Adding spi_optimize_message() broke the spi-mux driver because it calls spi_async() from it's transfer_one_message() callback. This resulted in passing an incorrectly optimized message to the controller. For example, if the underlying controller has an optimize_message() callback, this would have not been called and can cause a crash when the underlying controller driver tries to transfer the message. Also, since the spi-mux driver swaps out the controller pointer by replacing msg->spi, __spi_unoptimize_message() was being called with a different controller than the one used in __spi_optimize_message(). This could cause a crash when attempting to free the message resources when __spi_unoptimize_message() is called in spi_finalize_current_message() since it is being called with a controller that did not allocate the resources. This is fixed by adding a defer_optimize_message flag for controllers. This flag causes all of the spi_[maybe_][un]optimize_message() calls to be a no-op (other than attaching a pointer to the spi device to the message). This allows the spi-mux driver to pass an unmodified message to spi_async() in spi_mux_transfer_one_message() after the spi device has been swapped out. This causes __spi_optimize_message() and __spi_unoptimize_message() to be called only once per message and with the correct/same controller in each case. Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/ Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/ Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-07-08 20:05:29 -05:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi: Add a PTP system timestamp to the transfer structure SPI is one of the interfaces used to access devices which have a POSIX clock driver (real time clocks, 1588 timers etc). The fact that the SPI bus is slow is not what the main problem is, but rather the fact that drivers don't take a constant amount of time in transferring data over SPI. When there is a high delay in the readout of time, there will be uncertainty in the value that has been read out of the peripheral. When that delay is constant, the uncertainty can at least be approximated with a certain accuracy which is fine more often than not. Timing jitter occurs all over in the kernel code, and is mainly caused by having to let go of the CPU for various reasons such as preemption, servicing interrupts, going to sleep, etc. Another major reason is CPU dynamic frequency scaling. It turns out that the problem of retrieving time from a SPI peripheral with high accuracy can be solved by the use of "PTP system timestamping" - a mechanism to correlate the time when the device has snapshotted its internal time counter with the Linux system time at that same moment. This is sufficient for having a precise time measurement - it is not necessary for the whole SPI transfer to be transmitted "as fast as possible", or "as low-jitter as possible". The system has to be low-jitter for a very short amount of time to be effective. This patch introduces a PTP system timestamping mechanism in struct spi_transfer. This is to be used by SPI device drivers when they need to know the exact time at which the underlying device's time was snapshotted. More often than not, SPI peripherals have a very exact timing for when their SPI-to-interconnect bridge issues a transaction for snapshotting and reading the time register, and that will be dependent on when the SPI-to-interconnect bridge figures out that this is what it should do, aka as soon as it sees byte N of the SPI transfer. Since spi_device drivers are the ones who'd know best how the peripheral behaves in this regard, expose a mechanism in spi_transfer which allows them to specify which word (or word range) from the transfer should be timestamped. Add a default implementation of the PTP system timestamping in the SPI core. This is not going to be satisfactory performance-wise, but should at least increase the likelihood that SPI device drivers will use PTP system timestamping in the future. There are 3 entry points from the core towards the SPI controller drivers: - transfer_one: The driver is passed individual spi_transfers to execute. This is the easiest to timestamp. - transfer_one_message: The core passes the driver an entire spi_message (a potential batch of spi_transfers). The core puts the same pre and post timestamp to all transfers within a message. This is not ideal, but nothing better can be done by default anyway, since the core has no insight into how the driver batches the transfers. - transfer: Like transfer_one_message, but for unqueued drivers (i.e. the driver implements its own queue scheduling). Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20190905010114.26718-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-09-05 04:01:12 +03:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi: mux: Fix mux interaction with fast path optimisations The spi-mux driver is rather too clever and attempts to resubmit any message that is submitted to it to the parent controller with some adjusted callbacks. This does not play at all nicely with the fast path which now sets flags on the message indicating that it's being handled through the fast path, we see async messages flagged as being on the fast path. Ideally the spi-mux code would duplicate the message but that's rather invasive and a bit fragile in that it relies on the mux knowing which fields in the message to copy. Instead teach the core that there are controllers which can't cope with the fast path and have the mux flag itself as being such a controller, ensuring that messages going via the mux don't get partially handled via the fast path. This will reduce the performance of any spi-mux connected device since we'll now always use the thread for both the actual controller and the mux controller instead of just the actual controller but given that we were always hitting the slow path anyway it's hopefully not too much of an additional cost and it allows us to keep the fast path. Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Reported-by: Casper Andersson <casper.casan@gmail.com> Tested-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220901120732.49245-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-01 13:07:32 +01:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi: fix null pointer dereference within spi_sync If spi_sync() is called with the non-empty queue and the same spi_message is then reused, the complete callback for the message remains set while the context is cleared, leading to a null pointer dereference when the callback is invoked from spi_finalize_current_message(). With function inlining disabled, the call stack might look like this: _raw_spin_lock_irqsave from complete_with_flags+0x18/0x58 complete_with_flags from spi_complete+0x8/0xc spi_complete from spi_finalize_current_message+0xec/0x184 spi_finalize_current_message from spi_transfer_one_message+0x2a8/0x474 spi_transfer_one_message from __spi_pump_transfer_message+0x104/0x230 __spi_pump_transfer_message from __spi_transfer_message_noqueue+0x30/0xc4 __spi_transfer_message_noqueue from __spi_sync+0x204/0x248 __spi_sync from spi_sync+0x24/0x3c spi_sync from mcp251xfd_regmap_crc_read+0x124/0x28c [mcp251xfd] mcp251xfd_regmap_crc_read [mcp251xfd] from _regmap_raw_read+0xf8/0x154 _regmap_raw_read from _regmap_bus_read+0x44/0x70 _regmap_bus_read from _regmap_read+0x60/0xd8 _regmap_read from regmap_read+0x3c/0x5c regmap_read from mcp251xfd_alloc_can_err_skb+0x1c/0x54 [mcp251xfd] mcp251xfd_alloc_can_err_skb [mcp251xfd] from mcp251xfd_irq+0x194/0xe70 [mcp251xfd] mcp251xfd_irq [mcp251xfd] from irq_thread_fn+0x1c/0x78 irq_thread_fn from irq_thread+0x118/0x1f4 irq_thread from kthread+0xd8/0xf4 kthread from ret_from_fork+0x14/0x28 Fix this by also setting message->complete to NULL when the transfer is complete. Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20240430182705.13019-1-mans@mansr.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-30 19:27:05 +01:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
spi/mmc_spi: SPI bus locking API, using mutex SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-28 17:49:29 -07:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
treewide: Fix probing of devices in DT overlays When loading a DT overlay that creates a device, the device is not probed, unless the DT overlay is unloaded and reloaded again. After the recent refactoring to improve fw_devlink, it no longer depends on the "compatible" property to identify which device tree nodes will become struct devices. fw_devlink now picks up dangling consumers (consumers pointing to descendent device tree nodes of a device that aren't converted to child devices) when a device is successfully bound to a driver. See __fw_devlink_pickup_dangling_consumers(). However, during DT overlay, a device's device tree node can have sub-nodes added/removed without unbinding/rebinding the driver. This difference in behavior between the normal device instantiation and probing flow vs. the DT overlay flow has a bunch of implications that are pointed out elsewhere[1]. One of them is that the fw_devlink logic to pick up dangling consumers is never exercised. This patch solves the fw_devlink issue by marking all DT nodes added by DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become device), and by clearing the flag when a struct device is actually created for the DT node. This way, fw_devlink knows not to have consumers waiting on these newly added DT nodes, and to propagate the dependency to an ancestor DT node that has the corresponding struct device. Based on a patch by Saravana Kannan, which covered only platform and spi devices. [1] https://lore.kernel.org/r/CAGETcx_bkuFaLCiPrAWCPQz+w79ccDp6=9e881qmK=vx3hBMyg@mail.gmail.com Fixes: 4a032827daa89350 ("of: property: Simplify of_link_to_phandle()") Link: https://lore.kernel.org/r/CAGETcx_+rhHvaC_HJXGrr5_WAd2+k5f=rWYnkCZ6z5bGX-wj4w@mail.gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Saravana Kannan <saravanak@google.com> Tested-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Link: https://lore.kernel.org/r/e1fa546682ea4c8474ff997ab6244c5e11b6f8bc.1680182615.git.geert+renesas@glider.be Signed-off-by: Rob Herring <robh@kernel.org>
2023-03-30 15:26:13 +02:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y Since commit ce79d54ae447d651173 ("spi/of: Add OF notifier handler") the following warning is seen on a imx53 system that has CONFIG_OF_DYNAMIC=n: [ 0.048119] ------------[ cut here ]------------ [ 0.048146] WARNING: CPU: 0 PID: 1 at drivers/spi/spi.c:2419 spi_init+0x60/0xa8() [ 0.048158] Modules linked in: [ 0.048183] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc6-next-20141126-00003-g9388e85 #2080 [ 0.048193] Hardware name: Freescale i.MX53 (Device Tree Support) [ 0.048203] Backtrace: [ 0.048235] [<80011f74>] (dump_backtrace) from [<80012110>] (show_stack+0x18/0x1c) [ 0.048246] r6:00000973 r5:00000000 r4:00000000 r3:00000000 [ 0.048284] [<800120f8>] (show_stack) from [<806b3ad8>] (dump_stack+0x88/0xa4) [ 0.048312] [<806b3a50>] (dump_stack) from [<8002a55c>] (warn_slowpath_common+0x80/0xbc) [ 0.048320] r5:8096cfcc r4:00000000 [ 0.048343] [<8002a4dc>] (warn_slowpath_common) from [<8002a5bc>] (warn_slowpath_null+0x24/0x2c) [ 0.048354] r8:8096cf6c r7:809355ec r6:ddcd7c00 r5:812029e4 r4:00000000 [ 0.048389] [<8002a598>] (warn_slowpath_null) from [<8096cfcc>] (spi_init+0x60/0xa8) [ 0.048405] [<8096cf6c>] (spi_init) from [<80008a7c>] (do_one_initcall+0x88/0x1e0) [ 0.048415] r5:8099e018 r4:8099e018 [ 0.048438] [<800089f4>] (do_one_initcall) from [<80935e38>] (kernel_init_freeable+0x110/0x1e0) [ 0.048448] r10:80980700 r9:809806e4 r8:000000cc r7:809355ec r6:809f8940 r5:00000002 [ 0.048478] r4:8098d744 [ 0.048508] [<80935d28>] (kernel_init_freeable) from [<806ae574>] (kernel_init+0x10/0xf4) [ 0.048517] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:806ae564 [ 0.048547] r4:00000000 [ 0.048565] [<806ae564>] (kernel_init) from [<8000ed68>] (ret_from_fork+0x14/0x2c) [ 0.048574] r4:00000000 r3:00000000 [ 0.048616] ---[ end trace 405a65d177dae4fd ]--- Only check of_reconfig_notifier_register() in the CONFIG_OF_DYNAMIC=y case, as intended by commit ce79d54ae447d65. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-26 20:13:57 -02:00
spi / ACPI: add support for ACPI reconfigure notifications This patch adds supports for SPI device enumeration and removal via ACPI reconfiguration notifications that are send as a result of an ACPI table load or unload operation. The code is very similar with the device tree reconfiguration code with only small differences in the way we test and set the enumerated state of the device: * the equivalent of device tree's OF_POPULATED flag is the flags.visited field in the ACPI device and the following wrappers are used to manipulate it: acpi_device_enumerated(), acpi_device_set_enumerated() and acpi_device_clear_enumerated() * the device tree code checks of status of the OF_POPULATED flag to avoid trying to create duplicate Linux devices in two places: once when the controller is probed, and once when the reconfigure event is received; in the ACPI code the check is performed only once when the ACPI namespace is searched because this code path is invoked in both of the two mentioned cases The rest of the enumeration handling is similar with device tree: when the Linux device is unregistered the ACPI device is marked as not enumerated; also, when a device remove notification is received we check that the device is in the enumerated state before continuing with the removal of the Linux device. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 19:13:11 +03:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00
[PATCH] spi: simple SPI framework This is the core of a small SPI framework, implementing the model of a queue of messages which complete asynchronously (with thin synchronous wrappers on top). - It's still less than 2KB of ".text" (ARM). If there's got to be a mid-layer for something so simple, that's the right size budget. :) - The guts use board-specific SPI device tables to build the driver model tree. (Hardware probing is rarely an option.) - This version of Kconfig includes no drivers. At this writing there are two known master controller drivers (PXA/SSP, OMAP MicroWire) and three protocol drivers (CS8415a, ADS7846, DataFlash) with LKML mentions of other drivers in development. - No userspace API. There are several implementations to compare. Implement them like any other driver, and bind them with sysfs. The changes from last version posted to LKML (on 11-Nov-2005) are minor, and include: - One bugfix (removes a FIXME), with the visible effect of making device names be "spiB.C" where B is the bus number and C is the chipselect. - The "caller provides DMA mappings" mechanism now has kerneldoc, for DMA drivers that want to be fancy. - Hey, the framework init can be subsys_init. Even though board init logic fires earlier, at arch_init ... since the framework init is for driver support, and the board init support uses static init. - Various additional spec/doc clarifications based on discussions with other folk. It adds a brief "thank you" at the end, for folk who've helped nudge this framework into existence. As I've said before, I think that "protocol tweaking" is the main support that this driver framework will need to evolve. From: Mark Underwood <basicmark@yahoo.com> Update the SPI framework to remove a potential priority inversion case by reverting to kmalloc if the pre-allocated DMA-safe buffer isn't available. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-08 13:34:19 -08:00