linux/drivers/video/console/vgacon.c

1226 lines
36 KiB

[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
vgacon: Propagate console boot parameters before calling `vc_resize' Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26 00:26:22 +02:00
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
vgacon: Propagate console boot parameters before calling `vc_resize' Fix a division by zero in `vgacon_resize' with a backtrace like: vgacon_resize vc_do_resize vgacon_init do_bind_con_driver do_unbind_con_driver fbcon_fb_unbind do_unregister_framebuffer do_register_framebuffer register_framebuffer __drm_fb_helper_initial_config_and_unlock drm_helper_hpd_irq_event dw_hdmi_irq irq_thread kthread caused by `c->vc_cell_height' not having been initialized. This has only started to trigger with commit 860dafa90259 ("vt: Fix character height handling with VT_RESIZEX"), however the ultimate offender is commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console"). Said commit has added a call to `vc_resize' whenever `vgacon_init' is called with the `init' argument set to 0, which did not happen before. And the call is made before a key vgacon boot parameter retrieved in `vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to use to the console structure being worked on. Previously the parameter was `c->vc_font.height' and now it is `c->vc_cell_height'. In this particular scenario the registration of fbcon has failed and vt resorts to vgacon. Now fbcon does have initialized `c->vc_font.height' somehow, unlike `c->vc_cell_height', which is why this code did not crash before, but either way the boot parameters should have been copied to the console structure ahead of the call to `vc_resize' rather than afterwards, so that first the call has a chance to use them and second they do not change the console structure to something possibly different from what was used by `vc_resize'. Move the propagation of the vgacon boot parameters ahead of the call to `vc_resize' then. Adjust the comment accordingly. Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console") Cc: stable@vger.kernel.org # v2.6.18+ Reported-by: Wim Osterholt <wim@djo.tudelft.nl> Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-26 00:26:22 +02:00
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console One of the limitations of the framebuffer console system is its inablity to unload or detach itself from the console layer. And once it loads, it also locks in framebuffer drivers preventing their unload. Although the con2fbmap utility does provide a means to unload individual drivers, it requires that at least one framebuffer driver is loaded for use by fbcon. With this change, it is possible to detach fbcon from the console layer. If it is detached, it will reattach the boot console driver (which is permanently loaded) back to the console layer so the system can continue to work. As a consequence, fbcon will also decrement its reference count of individual framebuffer drivers, allowing all of these drivers to be unloaded even if fbcon is still loaded. Unless you use drivers that restores the display to text mode (rivafb and i810fb, for example), detaching fbcon does require assistance from userspace tools (ie, vbetools) for text mode to be restored completely. Without the help of these tools, fbcon will leave the VGA console corrupted. The methods that can be used will be described in Documentation/fb/fbcon.txt. Because the vt layer also increments the module reference count for each console driver, fbcon cannot be directly unloaded. It must be detached first prior to unload. Similarly, fbcon can be reattached to the console layer without having to reload the module. A nice feature if fbcon is compiled statically. Attaching and detaching fbcon is done via sysfs attributes. A class device entry for fbcon is created in /sys/class/graphics. The two attributes that controls this feature are detach and attach. Two other attributes that are piggybacked under /sys/class/graphics/fb[n] that are fbcon-specific, 'con_rotate' and 'con_rotate_all' are moved to fbcon. They are renamed as 'rotate' and 'rotate_all' respectively. Overall, this feature is a great help for developers working in the framebuffer or console layer. There is not need to continually reboot the kernel for every small change. It is also useful for regular users who wants to choose between a graphical console or a text console without having to reboot. Example usage for x86: /* start in text mode */ modprobe xxxfb modprobe fbcon /* graphical mode with fbcon using xxxfb */ echo 1 > /sys/class/graphics/fbcon/detach /* back to text mode, will produce corrupt display unless vbetool is used */ rmmod xxxfb modprobe yyyfb /* back to graphical mode with fbcon using yyyfb */ Before trying out this feature, please read Documentation/fb/fbcon.txt. This patch: In order for fbcon to detach itself from the console layer, vgacon, which is a boot console driver, must be fixed so it can retake the console multiple times, not just during init. The following needs to be done: - remove __init from the vgacon_startup, this is called again by take_over_console(). - vc->rows and vc->cols are set manually by vgacon during init. After init, vc_resize() can be used - make sure the scrollback_buffer is not reallocated Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 00:27:02 -07:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vgacon: Fix a UAF in vgacon_invert_region When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangxiaoxu5@huawei.com
2020-03-04 10:24:29 +08:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00
vt: Fix character height handling with VT_RESIZEX Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git> as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-13 11:51:50 +02:00