kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/fs/fuse/dev_uring.c

1371 lines
33 KiB
Raw Normal View History

fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: capture the unique id of fuse commands being sent The fuse_request_{send,end} tracepoints capture the value of req->in.h.unique in the trace output. It would be really nice if we could use this to match a request to its response for debugging and latency analysis, but the call to trace_fuse_request_send occurs before the unique id has been set: fuse_request_send: connection 8388608 req 0 opcode 1 (FUSE_LOOKUP) len 107 fuse_request_end: connection 8388608 req 6 len 16 error -2 (Notice that req moves from 0 to 6) Move the callsites to trace_fuse_request_send to after the unique id has been set by introducing a helper to do that for standard fuse_req requests. FUSE_FORGET requests are not covered by this because they appear to be synthesized into the event stream without a fuse_req object and are never replied to. Requests that are aborted without ever having been submitted to the fuse server retain the behavior that only the fuse_request_end tracepoint shows up in the trace record, and with req==0. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-09-15 17:24:48 -07:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: fix io-uring list corruption for terminated non-committed requests When a request is terminated before it has been committed, the request is not removed from the queue's list. This leaves a dangling list entry that leads to list corruption and use-after-free issues. Remove the request from the queue's list for terminated non-committed requests. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: stable@vger.kernel.org Reviewed-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-11-25 10:13:47 -08:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: add kernel-enforced timeout option for requests There are situations where fuse servers can become unresponsive or stuck, for example if the server is deadlocked. Currently, there's no good way to detect if a server is stuck and needs to be killed manually. This commit adds an option for enforcing a timeout (in seconds) for requests where if the timeout elapses without the server responding to the request, the connection will be automatically aborted. Please note that these timeouts are not 100% precise. For example, the request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the requested timeout due to internal implementation, in order to mitigate overhead. [SzM: Bump the API version number] Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-22 13:55:27 -08:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: add kernel-enforced timeout option for requests There are situations where fuse servers can become unresponsive or stuck, for example if the server is deadlocked. Currently, there's no good way to detect if a server is stuck and needs to be killed manually. This commit adds an option for enforcing a timeout (in seconds) for requests where if the timeout elapses without the server responding to the request, the connection will be automatically aborted. Please note that these timeouts are not 100% precise. For example, the request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the requested timeout due to internal implementation, in order to mitigate overhead. [SzM: Bump the API version number] Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-22 13:55:27 -08:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: fix uring race condition for null dereference of fc There is a race condition leading to a kernel crash from a null dereference when attemping to access fc->lock in fuse_uring_create_queue(). fc may be NULL in the case where another thread is creating the uring in fuse_uring_create() and has set fc->ring but has not yet set ring->fc when fuse_uring_create_queue() reads ring->fc. There is another race condition as well where in fuse_uring_register(), ring->nr_queues may still be 0 and not yet set to the new value when we compare qid against it. This fix sets fc->ring only after ring->fc and ring->nr_queues have been set, which guarantees now that ring->fc is a proper pointer when any queues are created and ring->nr_queues reflects the right number of queues if ring is not NULL. We must use smp_store_release() and smp_load_acquire() semantics to ensure the ordering will remain correct where fc->ring is assigned only after ring->fc and ring->nr_queues have been assigned. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Fixes: 24fe962c86f5 ("fuse: {io-uring} Handle SQEs - register commands") Reviewed-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-17 17:30:28 -07:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 16:37:42 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
io_uring/cmd: drop unused res2 param from io_uring_cmd_done() Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split out a separate io_uring_cmd_done32() helper for ->uring_cmd() implementations that return 32-byte CQEs. The res2 value passed to io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores it when is_cqe32 is passed as false. So drop the parameter from io_uring_cmd_done() to simplify the callers and clarify that it's not possible to return an extra value beyond the 32-bit CQE result. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-22 11:02:31 -06:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: refactor duplicate queue teardown operation Extract common queue iteration and teardown logic into fuse_uring_teardown_all_queues() helper function to eliminate code duplication between fuse_uring_async_stop_queues() and fuse_uring_stop_queues(). This is a pure refactoring with no functional changes, intended to improve maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2026-02-23 14:03:33 +00:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: refactor duplicate queue teardown operation Extract common queue iteration and teardown logic into fuse_uring_teardown_all_queues() helper function to eliminate code duplication between fuse_uring_async_stop_queues() and fuse_uring_stop_queues(). This is a pure refactoring with no functional changes, intended to improve maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2026-02-23 14:03:33 +00:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: refactor duplicate queue teardown operation Extract common queue iteration and teardown logic into fuse_uring_teardown_all_queues() helper function to eliminate code duplication between fuse_uring_async_stop_queues() and fuse_uring_stop_queues(). This is a pure refactoring with no functional changes, intended to improve maintainability. Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2026-02-23 14:03:33 +00:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
io_uring/cmd: drop unused res2 param from io_uring_cmd_done() Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split out a separate io_uring_cmd_done32() helper for ->uring_cmd() implementations that return 32-byte CQEs. The res2 value passed to io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores it when is_cqe32 is passed as false. So drop the parameter from io_uring_cmd_done() to simplify the callers and clarify that it's not possible to return an extra value beyond the 32-bit CQE result. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-22 11:02:31 -06:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: use boolean bit-fields in struct fuse_copy_state Refactor struct fuse_copy_state to use boolean bit-fields to improve clarity/readability and be consistent with other fuse structs that use bit-fields for boolean state (eg fuse_fs_context, fuse_args). No functional changes. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-20 12:16:59 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: missing copy_finish in fuse-over-io-uring argument copies Fix a possible reference count leak of payload pages during fuse argument copies. [Joanne: simplified error cleanup] Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: stable@vger.kernel.org # v6.14 Signed-off-by: Cheng Ding <cding@ddn.com> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-10-21 22:46:42 +02:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: Fix whitespace for fuse_uring_args_to_ring() comment The function comment accidentally got wrong indentation. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-10-21 22:46:43 +02:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: use boolean bit-fields in struct fuse_copy_state Refactor struct fuse_copy_state to use boolean bit-fields to improve clarity/readability and be consistent with other fuse structs that use bit-fields for boolean state (eg fuse_fs_context, fuse_args). No functional changes. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-20 12:16:59 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: missing copy_finish in fuse-over-io-uring argument copies Fix a possible reference count leak of payload pages during fuse argument copies. [Joanne: simplified error cleanup] Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: stable@vger.kernel.org # v6.14 Signed-off-by: Cheng Ding <cding@ddn.com> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-10-21 22:46:42 +02:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
io_uring/cmd: drop unused res2 param from io_uring_cmd_done() Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split out a separate io_uring_cmd_done32() helper for ->uring_cmd() implementations that return 32-byte CQEs. The res2 value passed to io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores it when is_cqe32 is passed as false. So drop the parameter from io_uring_cmd_done() to simplify the callers and clarify that it's not possible to return an extra value beyond the 32-bit CQE result. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-22 11:02:31 -06:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
io_uring: Add size check for sqe->cmd For SQE128, sqe->cmd provides 80 bytes for uring_cmd. Add macro to check if size of user struct does not exceed 80 bytes at compile time. User doesn't have to track this manually during development. Replace io_uring_sqe_cmd() inline func with macro and add io_uring_sqe128_cmd() which checks struct size for 16 bytes cmd and 80 bytes cmd respectively. Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-18 20:59:30 -08:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: block request allocation until io-uring init is complete Avoid races and block request allocation until io-uring queues are ready. This is a especially important for background requests, as bg request completion might cause lock order inversion of the typical queue->lock and then fc->bg_lock fuse_request_end spin_lock(&fc->bg_lock); flush_bg_queue fuse_send_one fuse_uring_queue_fuse_req spin_lock(&queue->lock); Signed-off-by: Bernd Schubert <bernd@bsbernd.com> Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:09 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
treewide: Replace kmalloc with kmalloc_obj for non-scalar types This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org>
2026-02-20 23:49:23 -08:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Handle teardown of ring entries On teardown struct file_operations::uring_cmd requests need to be completed by calling io_uring_cmd_done(). Not completing all ring entries would result in busy io-uring tasks giving warning messages in intervals and unreleased struct file. Additionally the fuse connection and with that the ring can only get released when all io-uring commands are completed. Completion is done with ring entries that are a) in waiting state for new fuse requests - io_uring_cmd_done is needed b) already in userspace - io_uring_cmd_done through teardown is not needed, the request can just get released. If fuse server is still active and commits such a ring entry, fuse_uring_cmd() already checks if the connection is active and then complete the io-uring itself with -ENOTCONN. I.e. special handling is not needed. This scheme is basically represented by the ring entry state FRRS_WAIT and FRRS_USERSPACE. Entries in state: - FRRS_INIT: No action needed, do not contribute to ring->queue_refs yet - All other states: Are currently processed by other tasks, async teardown is needed and it has to wait for the two states above. It could be also solved without an async teardown task, but would require additional if conditions in hot code paths. Also in my personal opinion the code looks cleaner with async teardown. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:04 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
io_uring: Add size check for sqe->cmd For SQE128, sqe->cmd provides 80 bytes for uring_cmd. Add macro to check if size of user struct does not exceed 80 bytes at compile time. User doesn't have to track this manually during development. Replace io_uring_sqe_cmd() inline func with macro and add io_uring_sqe128_cmd() which checks struct size for 16 bytes cmd and 80 bytes cmd respectively. Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com> Reviewed-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2026-02-18 20:59:30 -08:00
fuse: fix uring race condition for null dereference of fc There is a race condition leading to a kernel crash from a null dereference when attemping to access fc->lock in fuse_uring_create_queue(). fc may be NULL in the case where another thread is creating the uring in fuse_uring_create() and has set fc->ring but has not yet set ring->fc when fuse_uring_create_queue() reads ring->fc. There is another race condition as well where in fuse_uring_register(), ring->nr_queues may still be 0 and not yet set to the new value when we compare qid against it. This fix sets fc->ring only after ring->fc and ring->nr_queues have been set, which guarantees now that ring->fc is a proper pointer when any queues are created and ring->nr_queues reflects the right number of queues if ring is not NULL. We must use smp_store_release() and smp_load_acquire() semantics to ensure the ordering will remain correct where fc->ring is assigned only after ring->fc and ring->nr_queues have been assigned. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Fixes: 24fe962c86f5 ("fuse: {io-uring} Handle SQEs - register commands") Reviewed-by: Bernd Schubert <bschubert@ddn.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-17 17:30:28 -07:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: enable fuse-over-io-uring All required parts are handled now, fuse-io-uring can be enabled. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:10 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: {io-uring} Prevent mount point hang on fuse-server termination When the fuse-server terminates while the fuse-client or kernel still has queued URING_CMDs, these commands retain references to the struct file used by the fuse connection. This prevents fuse_dev_release() from being invoked, resulting in a hung mount point. This patch addresses the issue by making queued URING_CMDs cancelable, allowing fuse_dev_release() to proceed as expected and preventing the mount point from hanging. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:08 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: allow synchronous FUSE_INIT FUSE_INIT has always been asynchronous with mount. That means that the server processed this request after the mount syscall returned. This means that FUSE_INIT can't supply the root inode's ID, hence it currently has a hardcoded value. There are other limitations such as not being able to perform getxattr during mount, which is needed by selinux. To remove these limitations allow server to process FUSE_INIT while initializing the in-core super block for the fuse filesystem. This can only be done if the server is prepared to handle this, so add FUSE_DEV_IOC_SYNC_INIT ioctl, which a) lets the server know whether this feature is supported, returning ENOTTY othewrwise. b) lets the kernel know to perform a synchronous initialization The implementation is slightly tricky, since fuse_dev/fuse_conn are set up only during super block creation. This is solved by setting the private data of the fuse device file to a special value ((struct fuse_dev *) 1) and waiting for this to be turned into a proper fuse_dev before commecing with operations on the device file. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-08-22 13:10:44 +02:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: allow synchronous FUSE_INIT FUSE_INIT has always been asynchronous with mount. That means that the server processed this request after the mount syscall returned. This means that FUSE_INIT can't supply the root inode's ID, hence it currently has a hardcoded value. There are other limitations such as not being able to perform getxattr during mount, which is needed by selinux. To remove these limitations allow server to process FUSE_INIT while initializing the in-core super block for the fuse filesystem. This can only be done if the server is prepared to handle this, so add FUSE_DEV_IOC_SYNC_INIT ioctl, which a) lets the server know whether this feature is supported, returning ENOTTY othewrwise. b) lets the kernel know to perform a synchronous initialization The implementation is slightly tricky, since fuse_dev/fuse_conn are set up only during super block creation. This is solved by setting the private data of the fuse device file to a special value ((struct fuse_dev *) 1) and waiting for this to be turned into a proper fuse_dev before commecing with operations on the device file. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-08-22 13:10:44 +02:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: prevent disabling io-uring on active connections The enable_uring module parameter allows administrators to enable/disable io-uring support for FUSE at runtime. However, disabling io-uring while connections already have it enabled can lead to an inconsistent state. Fix this by keeping io-uring enabled on connections that were already using it, even if the module parameter is later disabled. This ensures active FUSE mounts continue to function correctly. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-23 17:55:32 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: block request allocation until io-uring init is complete Avoid races and block request allocation until io-uring queues are ready. This is a especially important for background requests, as bg request completion might cause lock order inversion of the typical queue->lock and then fc->bg_lock fuse_request_end spin_lock(&fc->bg_lock); flush_bg_queue fuse_send_one fuse_uring_queue_fuse_req spin_lock(&queue->lock); Signed-off-by: Bernd Schubert <bernd@bsbernd.com> Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:09 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Add io-uring sqe commit and fetch support This adds support for fuse request completion through ring SQEs (FUSE_URING_CMD_COMMIT_AND_FETCH handling). After committing the ring entry it becomes available for new fuse requests. Handling of requests through the ring (SQE/CQE handling) is complete now. Fuse request data are copied through the mmaped ring buffer, there is no support for any zero copy yet. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:03 +01:00
fuse: {io-uring} Handle SQEs - register commands This adds basic support for ring SQEs (with opcode=IORING_OP_URING_CMD). For now only FUSE_IO_URING_CMD_REGISTER is handled to register queue entries. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:28:59 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: optimize over-io-uring request expiration check Currently, when checking whether a request has timed out, we check fpq processing, but fuse-over-io-uring has one fpq per core and 256 entries in the processing table. For systems where there are a large number of cores, this may be too much overhead. Instead of checking the fpq processing list, check ent_w_req_queue and ent_in_userspace. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Bernd Schubert <bernd@bsbernd.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-02-03 11:30:22 -08:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
io_uring/cmd: drop unused res2 param from io_uring_cmd_done() Commit 79525b51acc1 ("io_uring: fix nvme's 32b cqes on mixed cq") split out a separate io_uring_cmd_done32() helper for ->uring_cmd() implementations that return 32-byte CQEs. The res2 value passed to io_uring_cmd_done() is now unused because __io_uring_cmd_done() ignores it when is_cqe32 is passed as false. So drop the parameter from io_uring_cmd_done() to simplify the callers and clarify that it's not possible to return an extra value beyond the 32-bit CQE result. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-09-22 11:02:31 -06:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
io_uring/uring_cmd: avoid double indirect call in task work dispatch io_uring task work dispatch makes an indirect call to struct io_kiocb's io_task_work.func field to allow running arbitrary task work functions. In the uring_cmd case, this calls io_uring_cmd_work(), which immediately makes another indirect call to struct io_uring_cmd's task_work_cb field. Change the uring_cmd task work callbacks to functions whose signatures match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert from the task work's struct io_tw_req argument to struct io_uring_cmd *. Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid manufacturing issue_flags in the uring_cmd task work callbacks. Now uring_cmd task work dispatch makes a single indirect call to the uring_cmd implementation's callback. This also allows removing the task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for future storage. Since fuse_uring_send_in_task() now has access to the io_tw_token_t, check its cancel field directly instead of relying on the IO_URING_F_TASK_DEAD issue flag. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-10-31 14:34:30 -06:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
io_uring/uring_cmd: avoid double indirect call in task work dispatch io_uring task work dispatch makes an indirect call to struct io_kiocb's io_task_work.func field to allow running arbitrary task work functions. In the uring_cmd case, this calls io_uring_cmd_work(), which immediately makes another indirect call to struct io_uring_cmd's task_work_cb field. Change the uring_cmd task work callbacks to functions whose signatures match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert from the task work's struct io_tw_req argument to struct io_uring_cmd *. Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid manufacturing issue_flags in the uring_cmd task work callbacks. Now uring_cmd task work dispatch makes a single indirect call to the uring_cmd implementation's callback. This also allows removing the task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for future storage. Since fuse_uring_send_in_task() now has access to the io_tw_token_t, check its cancel field directly instead of relying on the IO_URING_F_TASK_DEAD issue flag. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-10-31 14:34:30 -06:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
io_uring/uring_cmd: avoid double indirect call in task work dispatch io_uring task work dispatch makes an indirect call to struct io_kiocb's io_task_work.func field to allow running arbitrary task work functions. In the uring_cmd case, this calls io_uring_cmd_work(), which immediately makes another indirect call to struct io_uring_cmd's task_work_cb field. Change the uring_cmd task work callbacks to functions whose signatures match io_req_tw_func_t. Add a function io_uring_cmd_from_tw() to convert from the task work's struct io_tw_req argument to struct io_uring_cmd *. Define a constant IO_URING_CMD_TASK_WORK_ISSUE_FLAGS to avoid manufacturing issue_flags in the uring_cmd task work callbacks. Now uring_cmd task work dispatch makes a single indirect call to the uring_cmd implementation's callback. This also allows removing the task_work_cb field from struct io_uring_cmd, freeing up 8 bytes for future storage. Since fuse_uring_send_in_task() now has access to the io_tw_token_t, check its cancel field directly instead of relying on the IO_URING_F_TASK_DEAD issue flag. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-10-31 14:34:30 -06:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: capture the unique id of fuse commands being sent The fuse_request_{send,end} tracepoints capture the value of req->in.h.unique in the trace output. It would be really nice if we could use this to match a request to its response for debugging and latency analysis, but the call to trace_fuse_request_send occurs before the unique id has been set: fuse_request_send: connection 8388608 req 0 opcode 1 (FUSE_LOOKUP) len 107 fuse_request_end: connection 8388608 req 6 len 16 error -2 (Notice that req moves from 0 to 6) Move the callsites to trace_fuse_request_send to after the unique id has been set by introducing a helper to do that for standard fuse_req requests. FUSE_FORGET requests are not covered by this because they appear to be synthesized into the event stream without a fuse_req object and are never replied to. Requests that are aborted without ever having been submitted to the fuse server retain the behavior that only the fuse_request_end tracepoint shows up in the trace record, and with req==0. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-09-15 17:24:48 -07:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: {io-uring} Fix a possible req cancellation race task-A (application) might be in request_wait_answer and try to remove the request when it has FR_PENDING set. task-B (a fuse-server io-uring task) might handle this request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when fetching the next request and accessed the req from the pending list in fuse_uring_ent_assign_req(). That code path was not protected by fiq->lock and so might race with task-A. For scaling reasons we better don't use fiq->lock, but add a handler to remove canceled requests from the queue. This also removes usage of fiq->lock from fuse_uring_add_req_to_ring_ent() altogether, as it was there just to protect against this race and incomplete. Also added is a comment why FR_PENDING is not cleared. Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: <stable@vger.kernel.org> # v6.14 Reported-by: Joanne Koong <joannelkoong@gmail.com> Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/ Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-25 18:29:31 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: {io-uring} Fix a possible req cancellation race task-A (application) might be in request_wait_answer and try to remove the request when it has FR_PENDING set. task-B (a fuse-server io-uring task) might handle this request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when fetching the next request and accessed the req from the pending list in fuse_uring_ent_assign_req(). That code path was not protected by fiq->lock and so might race with task-A. For scaling reasons we better don't use fiq->lock, but add a handler to remove canceled requests from the queue. This also removes usage of fiq->lock from fuse_uring_add_req_to_ring_ent() altogether, as it was there just to protect against this race and incomplete. Also added is a comment why FR_PENDING is not cleared. Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: <stable@vger.kernel.org> # v6.14 Reported-by: Joanne Koong <joannelkoong@gmail.com> Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/ Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-25 18:29:31 +01:00
fuse: Allow to queue bg requests through io-uring This prepares queueing and sending background requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:07 +01:00
fuse: {io-uring} Fix a possible req cancellation race task-A (application) might be in request_wait_answer and try to remove the request when it has FR_PENDING set. task-B (a fuse-server io-uring task) might handle this request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when fetching the next request and accessed the req from the pending list in fuse_uring_ent_assign_req(). That code path was not protected by fiq->lock and so might race with task-A. For scaling reasons we better don't use fiq->lock, but add a handler to remove canceled requests from the queue. This also removes usage of fiq->lock from fuse_uring_add_req_to_ring_ent() altogether, as it was there just to protect against this race and incomplete. Also added is a comment why FR_PENDING is not cleared. Fixes: c090c8abae4b ("fuse: Add io-uring sqe commit and fetch support") Cc: <stable@vger.kernel.org> # v6.14 Reported-by: Joanne Koong <joannelkoong@gmail.com> Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/ Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-03-25 18:29:31 +01:00
fuse: Allow to queue fg requests through io-uring This prepares queueing and sending foreground requests through io-uring. Signed-off-by: Bernd Schubert <bschubert@ddn.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring Reviewed-by: Luis Henriques <luis@igalia.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2025-01-20 02:29:06 +01:00