kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-10 20:48:12 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/include/debug/tegra.S

218 lines
6.3 KiB
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282 Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29 07:17:56 -07:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: fix DEBUG_LL combined with LPAE The DEBUG_LL UART address is mapped as an MMU section, hence, the virtual address must be section-aligned. Sections are 1MB without LPAE and 2MB with LPAE. Tegra's virtual address was only aligned to 1MB, and hence the mapping was set up incorrectly with LPAE enabled, thus causing a hang early during boot. Fix this by picking a different virtual address that is aligned to 2MB. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-10-28 16:56:14 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: fix DEBUG_LL combined with LPAE The DEBUG_LL UART address is mapped as an MMU section, hence, the virtual address must be section-aligned. Sections are 1MB without LPAE and 2MB with LPAE. Tegra's virtual address was only aligned to 1MB, and hence the mapping was set up incorrectly with LPAE enabled, thus causing a hang early during boot. Fix this by picking a different virtual address that is aligned to 2MB. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-10-28 16:56:14 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor The tegra_uart_config of the DEBUG_LL code is now placed right at the start of the .text section after commit which enabled debug output in the decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled since tegra_uart_config data is executes as a code. Fix the misplaced tegra_uart_config storage by embedding it into the code. Cc: stable@vger.kernel.org Fixes: 2596a72d3384 ("ARM: 9009/1: uncompress: Enable debug in head.S") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-15 16:16:44 +01:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor The tegra_uart_config of the DEBUG_LL code is now placed right at the start of the .text section after commit which enabled debug output in the decompressor. Tegra devices are not booting anymore if DEBUG_LL is enabled since tegra_uart_config data is executes as a code. Fix the misplaced tegra_uart_config storage by embedding it into the code. Cc: stable@vger.kernel.org Fixes: 2596a72d3384 ("ARM: 9009/1: uncompress: Enable debug in head.S") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-15 16:16:44 +01:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: 8844/1: use unified assembler in assembly files Use unified assembler syntax (UAL) in assembly files. Divided syntax is considered deprecated. This will also allow to build the kernel using LLVM's integrated assembler. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-02-18 00:57:38 +01:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: don't hard-code DEBUG_LL baud rate Stop writing to the UART clock divider registers in the Tegra DEBUG_LL code. This allows the DEBUG_LL output to use whatever baud rate was set up by the bootloader. Some users are using higher rates than 115200. This removes the only usage of tegra_uart_config[3], so reduce the size allocated for that array. Finally, fix busyuart() so that it only waits for THRE and not TEMT. For some reason, TEMT doesn't get asserted (at least on Tegra30 Beaver) at 9600 baud, even though it does at 115200 baud. This sounds like a HW bug, but I haven't investigated. For reference, U-Boot's serial code has always only checked THRE, and not checked TEMT. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-11-05 14:10:53 -07:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: 9004/1: debug: Split waituart to CTS and TXRDY This patch was triggered by a remark from Russell that introducing a call to the waituart (needed to fix debug prints on the Qualcomm platforms) was dangerous because in some cases this will involve waiting for a modem CTS (clear to send) signal, and debug messages would maybe not work on platforms with no modem connected to the UART port: they will just hang waiting for the modem to assert CTS and this might never happen. Looking through all UART debug drivers implementing the waituart macro I discovered that all users except two actually use this macro to check if the UART is ready for TX, let's call this TXRDY. Only two debug UART drivers actually check for CTS: - arch/arm/include/debug/8250.S - arch/arm/include/debug/tegra.S The former is very significant since the 8250 is possibly the most common UART on the planet. We have the following problem: the semantics of waituart are ambiguous making it dangerous to introduce the macro to debug code fixing debug prints for Qualcomm. To start to pry this problem apart, this patch does the following: - Convert all debug UART drivers to define two macros: - waituartcts with the clear semantic to wait for CTS to be asserted - waituarttxrdy with the clear semantic to wait for the TX capability of the UART to be ready - When doing this take care to assign the right function to each drivers macro, so they now do exactly the above. - Update the three sites in the kernel invoking the waituart macro to call waituartcts/waituarttxrdy in sequence, so that the functional impact on the kernel should be zero. After this we can start to change the code sites using this code to do the right thing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-08-27 23:25:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra DEBUG_UNCOMPRESS was previously disallowed for Tegra due to tegra.S's use of global data that was not linked into the decompressor. Solve this by declaring this symbol in tegra.S when it is being built into the decompressor. For the kernel proper, leave the declaration in mach-tegra/common.c as explained in the comment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-02 20:53:37 +01:00
ARM: 9004/1: debug: Split waituart to CTS and TXRDY This patch was triggered by a remark from Russell that introducing a call to the waituart (needed to fix debug prints on the Qualcomm platforms) was dangerous because in some cases this will involve waiting for a modem CTS (clear to send) signal, and debug messages would maybe not work on platforms with no modem connected to the UART port: they will just hang waiting for the modem to assert CTS and this might never happen. Looking through all UART debug drivers implementing the waituart macro I discovered that all users except two actually use this macro to check if the UART is ready for TX, let's call this TXRDY. Only two debug UART drivers actually check for CTS: - arch/arm/include/debug/8250.S - arch/arm/include/debug/tegra.S The former is very significant since the 8250 is possibly the most common UART on the planet. We have the following problem: the semantics of waituart are ambiguous making it dangerous to introduce the macro to debug code fixing debug prints for Qualcomm. To start to pry this problem apart, this patch does the following: - Convert all debug UART drivers to define two macros: - waituartcts with the clear semantic to wait for CTS to be asserted - waituarttxrdy with the clear semantic to wait for the TX capability of the UART to be ready - When doing this take care to assign the right function to each drivers macro, so they now do exactly the above. - Update the three sites in the kernel invoking the waituart macro to call waituartcts/waituarttxrdy in sequence, so that the functional impact on the kernel should be zero. After this we can start to change the code sites using this code to do the right thing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-08-27 23:25:37 +01:00