linux/arch/arm64/include/asm/processor.h

449 lines
13 KiB

arm64/mte: Add userspace interface for enabling asymmetric mode The architecture provides an asymmetric mode for MTE where tag mismatches are checked asynchronously for stores but synchronously for loads. Allow userspace processes to select this and make it available as a default mode via the existing per-CPU sysfs interface. Since there PR_MTE_TCF_ values are a bitmask (allowing the kernel to choose between the multiple modes) and there are no free bits adjacent to the existing PR_MTE_TCF_ bits the set of bits used to specify the mode becomes disjoint. Programs using the new interface should be aware of this and programs that do not use it will not see any change in behaviour. When userspace requests two possible modes but the system default for the CPU is the third mode (eg, default is synchronous but userspace requests either asynchronous or asymmetric) the preference order is: ASYMM > ASYNC > SYNC This situation is not currently possible since there are only two modes and it is mandatory to have a system default so there could be no ambiguity and there is no ABI change. The chosen order is basically arbitrary as we do not have a clear metric for what is better here. If userspace requests specifically asymmetric mode via the prctl() and the system does not support it then we will return an error, this mirrors how we handle the case where userspace enables MTE on a system that does not support MTE at all and the behaviour that will be seen if running on an older kernel that does not support userspace use of asymmetric mode. Attempts to set asymmetric mode as the default mode will result in an error if the system does not support it. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com> Tested-by: Branislav Rankov <branislav.rankov@arm.com> Link: https://lore.kernel.org/r/20220216173224.2342152-5-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-02-16 17:32:24 +00:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: signal: Report signal frame size to userspace via auxv Stateful CPU architecture extensions may require the signal frame to grow to a size that exceeds the arch's MINSIGSTKSZ #define. However, changing this #define is an ABI break. To allow userspace the option of determining the signal frame size in a more forwards-compatible way, this patch adds a new auxv entry tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame size that the process can observe during its lifetime. If AT_MINSIGSTKSZ is absent from the aux vector, the caller can assume that the MINSIGSTKSZ #define is sufficient. This allows for a consistent interface with older kernels that do not provide AT_MINSIGSTKSZ. The idea is that libc could expose this via sysconf() or some similar mechanism. There is deliberately no AT_SIGSTKSZ. The kernel knows nothing about userspace's own stack overheads and should not pretend to know. For arm64: The primary motivation for this interface is the Scalable Vector Extension, which can require at least 4KB or so of extra space in the signal frame for the largest hardware implementations. To determine the correct value, a "Christmas tree" mode (via the add_all argument) is added to setup_sigframe_layout(), to simulate addition of all possible records to the signal frame at maximum possible size. If this procedure goes wrong somehow, resulting in a stupidly large frame layout and hence failure of sigframe_alloc() to allocate a record to the frame, then this is indicative of a kernel bug. In this case, we WARN() and no attempt is made to populate AT_MINSIGSTKSZ for userspace. For arm64 SVE: The SVE context block in the signal frame needs to be considered too when computing the maximum possible signal frame size. Because the size of this block depends on the vector length, this patch computes the size based not on the thread's current vector length but instead on the maximum possible vector length: this determines the maximum size of SVE context block that can be observed in any signal frame for the lifetime of the process. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-01 11:10:14 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
2018-03-26 15:12:28 +01:00
arm64: uaccess: remove set_fs() Now that the uaccess primitives dont take addr_limit into account, we have no need to manipulate this via set_fs() and get_fs(). Remove support for these, along with some infrastructure this renders redundant. We no longer need to flip UAO to access kernel memory under KERNEL_DS, and head.S unconditionally clears UAO for all kernel configurations via an ERET in init_kernel_el. Thus, we don't need to dynamically flip UAO, nor do we need to context-switch it. However, we still need to adjust PAN during SDEI entry. Masking of __user pointers no longer needs to use the dynamic value of addr_limit, and can use a constant derived from the maximum possible userspace task size. A new TASK_SIZE_MAX constant is introduced for this, which is also used by core code. In configurations supporting 52-bit VAs, this may include a region of unusable VA space above a 48-bit TTBR0 limit, but never includes any portion of TTBR1. Note that TASK_SIZE_MAX is an exclusive limit, while USER_DS and KERNEL_DS were inclusive limits, and is converted to a mask by subtracting one. As the SDEI entry code repurposes the otherwise unnecessary pt_regs::orig_addr_limit field to store the TTBR1 of the interrupted context, for now we rename that to pt_regs::sdei_ttbr1. In future we can consider factoring that out. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: James Morse <james.morse@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20201202131558.39270-10-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-12-02 13:15:55 +00:00
arm64/fpsimd: Have KVM explicitly say which FP registers to save In order to avoid needlessly saving and restoring the guest registers KVM relies on the host FPSMID code to save the guest registers when we context switch away from the guest. This is done by binding the KVM guest state to the CPU on top of the task state that was originally there, then carefully managing the TIF_SVE flag for the task to cause the host to save the full SVE state when needed regardless of the needs of the host task. This works well enough but isn't terribly direct about what is going on and makes it much more complicated to try to optimise what we're doing with the SVE register state. Let's instead have KVM pass in the register state it wants saving when it binds to the CPU. We introduce a new FP_STATE_CURRENT for use during normal task binding to indicate that we should base our decisions on the current task. This should not be used when actually saving. Ideally we might want to use a separate enum for the type to save but this enum and the enum values would then need to be named which has problems with clarity and ambiguity. In order to ease any future debugging that might be required this patch does not actually update any of the decision making about what to save, it merely starts tracking the new information and warns if the requested state is not what we would otherwise have decided to save. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20221115094640.112848-4-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2022-11-15 09:46:35 +00:00
arm64: fpsimd: Use opaque type for SVE state As the SVE state size can vary at runtime, we don't have a concrete type for the in-memory SVE state, and pass this around using a pointer to void. The functions which save/restore the SVE state have a very unusual calling convention, expecting a pointer to the FFR *in the middle of* the in-memory SVE state, which is also passed as a pointer to void. Passing a pointer to the FFR also requires that callers find the live VL and perform some arithmetic, which callers implement differently. Using pointer to void means that it's very easy to introduce errors that cannot be caught by the compiler (e.g. as 'void **' can be assigned to 'void *'). In general this is unnecessarily confusing and fragile. Improve this by adding an opaque 'struct arm64_sve_state', and consistently passing a pointer to this, performing the necessary offsetting *within* the save/restore functions. For the moment, the offsetting is performed in a new '_sve_pffr' assembly macro, using the ADDVL and ADDPL instructions. These add a multiple of the live vector length and predicate length respectively. The ADDVL immediate range cannot encode 32, so this is split into two increments of 16. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2026-06-03 12:06:25 +01:00
arm64: fpsimd: Use opaque type for SVE state As the SVE state size can vary at runtime, we don't have a concrete type for the in-memory SVE state, and pass this around using a pointer to void. The functions which save/restore the SVE state have a very unusual calling convention, expecting a pointer to the FFR *in the middle of* the in-memory SVE state, which is also passed as a pointer to void. Passing a pointer to the FFR also requires that callers find the live VL and perform some arithmetic, which callers implement differently. Using pointer to void means that it's very easy to introduce errors that cannot be caught by the compiler (e.g. as 'void **' can be assigned to 'void *'). In general this is unnecessarily confusing and fragile. Improve this by adding an opaque 'struct arm64_sve_state', and consistently passing a pointer to this, performing the necessary offsetting *within* the save/restore functions. For the moment, the offsetting is performed in a new '_sve_pffr' assembly macro, using the ADDVL and ADDPL instructions. These add a multiple of the live vector length and predicate length respectively. The ADDVL immediate range cannot encode 32, so this is split into two increments of 16. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2026-06-03 12:06:25 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: fpsimd: Use opaque type for SVE state As the SVE state size can vary at runtime, we don't have a concrete type for the in-memory SVE state, and pass this around using a pointer to void. The functions which save/restore the SVE state have a very unusual calling convention, expecting a pointer to the FFR *in the middle of* the in-memory SVE state, which is also passed as a pointer to void. Passing a pointer to the FFR also requires that callers find the live VL and perform some arithmetic, which callers implement differently. Using pointer to void means that it's very easy to introduce errors that cannot be caught by the compiler (e.g. as 'void **' can be assigned to 'void *'). In general this is unnecessarily confusing and fragile. Improve this by adding an opaque 'struct arm64_sve_state', and consistently passing a pointer to this, performing the necessary offsetting *within* the save/restore functions. For the moment, the offsetting is performed in a new '_sve_pffr' assembly macro, using the ADDVL and ADDPL instructions. These add a multiple of the live vector length and predicate length respectively. The ADDVL immediate range cannot encode 32, so this is split into two increments of 16. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fuad Tabba <tabba@google.com> Cc: James Morse <james.morse@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oupton@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2026-06-03 12:06:25 +01:00
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch Currently, the FPSIMD register file is not preserved and restored along with the general registers on exception entry/exit or context switch. For this reason, we disable preemption when enabling FPSIMD for kernel mode use in task context, and suspend the processing of softirqs so that there are no concurrent uses in the kernel. (Kernel mode FPSIMD may not be used at all in other contexts). Disabling preemption while doing CPU intensive work on inputs of potentially unbounded size is bad for real-time performance, which is why we try and ensure that SIMD crypto code does not operate on more than ~4k at a time, which is an arbitrary limit and requires assembler code to implement efficiently. We can avoid the need for disabling preemption if we can ensure that any in-kernel users of the NEON will not lose the FPSIMD register state across a context switch. And given that disabling softirqs implicitly disables preemption as well, we will also have to ensure that a softirq that runs code using FPSIMD can safely interrupt an in-kernel user. So introduce a thread_info flag TIF_KERNEL_FPSTATE, and modify the context switch hook for FPSIMD to preserve and restore the kernel mode FPSIMD to/from struct thread_struct when it is set. This avoids any scheduling blackouts due to prolonged use of FPSIMD in kernel mode, without the need for manual yielding. In order to support softirq processing while FPSIMD is being used in kernel task context, use the same flag to decide whether the kernel mode FPSIMD state needs to be preserved and restored before allowing FPSIMD to be used in softirq context. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20231208113218.3001940-8-ardb@google.com Signed-off-by: Will Deacon <will@kernel.org>
2023-12-08 12:32:21 +01:00
arm64/gcs: Implement shadow stack prctl() interface Implement the architecture neutral prctl() interface for setting the shadow stack status, this supports setting and reading the current GCS configuration for the current thread. Userspace can enable basic GCS functionality and additionally also support for GCS pushes and arbitrary GCS stores. It is expected that this prctl() will be called very early in application startup, for example by the dynamic linker, and not subsequently adjusted during normal operation. Users should carefully note that after enabling GCS for a thread GCS will become active with no call stack so it is not normally possible to return from the function that invoked the prctl(). State is stored per thread, enabling GCS for a thread causes a GCS to be allocated for that thread. Userspace may lock the current GCS configuration by specifying PR_SHADOW_STACK_ENABLE_LOCK, this prevents any further changes to the GCS configuration via any means. If GCS is not being enabled then all flags other than _LOCK are ignored, it is not possible to enable stores or pops without enabling GCS. When disabling the GCS we do not free the allocated stack, this allows for inspection of the GCS after disabling as part of fault reporting. Since it is not an expected use case and since it presents some complications in determining what to do with previously initialsed data on the GCS attempts to reenable GCS after this are rejected. This can be revisted if a use case arises. Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-23-222b78d87eee@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-01 23:59:02 +01:00
arm64/sve: Use accessor functions for vector lengths in thread_struct In a system with SME there are parallel vector length controls for SVE and SME vectors which function in much the same way so it is desirable to share the code for handling them as much as possible. In order to prepare for doing this add a layer of accessor functions for the various VL related operations on tasks. Since almost all current interactions are actually via task->thread rather than directly with the thread_info the accessors use that. Accessors are provided for both generic and SVE specific usage, the generic accessors should be used for cases where register state is being manipulated since the registers are shared between streaming and regular SVE so we know that when SME support is implemented we will always have to be in the appropriate mode already and hence can generalise now. Since we are using task_struct and we don't want to cause widespread inclusion of sched.h the acessors are all out of line, it is hoped that none of the uses are in a sufficiently critical path for this to be an issue. Those that are most likely to present an issue are in the same translation unit so hopefully the compiler may be able to inline anyway. This is purely adding the layer of abstraction, additional work will be needed to support tasks using SME. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211019172247.3045838-7-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-19 18:22:11 +01:00
arm64/sve: Use accessor functions for vector lengths in thread_struct In a system with SME there are parallel vector length controls for SVE and SME vectors which function in much the same way so it is desirable to share the code for handling them as much as possible. In order to prepare for doing this add a layer of accessor functions for the various VL related operations on tasks. Since almost all current interactions are actually via task->thread rather than directly with the thread_info the accessors use that. Accessors are provided for both generic and SVE specific usage, the generic accessors should be used for cases where register state is being manipulated since the registers are shared between streaming and regular SVE so we know that when SME support is implemented we will always have to be in the appropriate mode already and hence can generalise now. Since we are using task_struct and we don't want to cause widespread inclusion of sched.h the acessors are all out of line, it is hoped that none of the uses are in a sufficiently critical path for this to be an issue. Those that are most likely to present an issue are in the same translation unit so hopefully the compiler may be able to inline anyway. This is purely adding the layer of abstraction, additional work will be needed to support tasks using SME. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211019172247.3045838-7-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-19 18:22:11 +01:00
arm64/sme: Implement streaming SVE signal handling When in streaming mode we have the same set of SVE registers as we do in regular SVE mode with the exception of FFR and the use of the SME vector length. Provide signal handling for these registers by taking one of the reserved words in the SVE signal context as a flags field and defining a flag which is set for streaming mode. When the flag is set the vector length is set to the streaming mode vector length and we save and restore streaming mode data. We support entering or leaving streaming mode based on the value of the flag but do not support changing the vector length, this is not currently supported SVE signal handling. We could instead allocate a separate record in the signal frame for the streaming mode SVE context but this inflates the size of the maximal signal frame required and adds complication when validating signal frames from userspace, especially given the current structure of the code. Any implementation of support for streaming mode vectors in signals will have some potential for causing issues for applications that attempt to handle SVE vectors in signals, use streaming mode but do not understand streaming mode in their signal handling code, it is hard to identify a case that is clearly better than any other - they all have cases where they could cause unexpected register corruption or faults. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220419112247.711548-19-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 12:22:26 +01:00
arm64/sme: Implement streaming SVE signal handling When in streaming mode we have the same set of SVE registers as we do in regular SVE mode with the exception of FFR and the use of the SME vector length. Provide signal handling for these registers by taking one of the reserved words in the SVE signal context as a flags field and defining a flag which is set for streaming mode. When the flag is set the vector length is set to the streaming mode vector length and we save and restore streaming mode data. We support entering or leaving streaming mode based on the value of the flag but do not support changing the vector length, this is not currently supported SVE signal handling. We could instead allocate a separate record in the signal frame for the streaming mode SVE context but this inflates the size of the maximal signal frame required and adds complication when validating signal frames from userspace, especially given the current structure of the code. Any implementation of support for streaming mode vectors in signals will have some potential for causing issues for applications that attempt to handle SVE vectors in signals, use streaming mode but do not understand streaming mode in their signal handling code, it is hard to identify a case that is clearly better than any other - they all have cases where they could cause unexpected register corruption or faults. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220419112247.711548-19-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-04-19 12:22:26 +01:00
arm64/sve: Use accessor functions for vector lengths in thread_struct In a system with SME there are parallel vector length controls for SVE and SME vectors which function in much the same way so it is desirable to share the code for handling them as much as possible. In order to prepare for doing this add a layer of accessor functions for the various VL related operations on tasks. Since almost all current interactions are actually via task->thread rather than directly with the thread_info the accessors use that. Accessors are provided for both generic and SVE specific usage, the generic accessors should be used for cases where register state is being manipulated since the registers are shared between streaming and regular SVE so we know that when SME support is implemented we will always have to be in the appropriate mode already and hence can generalise now. Since we are using task_struct and we don't want to cause widespread inclusion of sched.h the acessors are all out of line, it is hoped that none of the uses are in a sufficiently critical path for this to be an issue. Those that are most likely to present an issue are in the same translation unit so hopefully the compiler may be able to inline anyway. This is purely adding the layer of abstraction, additional work will be needed to support tasks using SME. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211019172247.3045838-7-broonie@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2021-10-19 18:22:11 +01:00
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) This change introduces a prctl that allows the user program to control which PAC keys are enabled in a particular task. The main reason why this is useful is to enable a userspace ABI that uses PAC to sign and authenticate function pointers and other pointers exposed outside of the function, while still allowing binaries conforming to the ABI to interoperate with legacy binaries that do not sign or authenticate pointers. The idea is that a dynamic loader or early startup code would issue this prctl very early after establishing that a process may load legacy binaries, but before executing any PAC instructions. This change adds a small amount of overhead to kernel entry and exit due to additional required instruction sequences. On a DragonBoard 845c (Cortex-A75) with the powersave governor, the overhead of similar instruction sequences was measured as 4.9ns when simulating the common case where IA is left enabled, or 43.7ns when simulating the uncommon case where IA is disabled. These numbers can be seen as the worst case scenario, since in more realistic scenarios a better performing governor would be used and a newer chip would be used that would support PAC unlike Cortex-A75 and would be expected to be faster than Cortex-A75. On an Apple M1 under a hypervisor, the overhead of the entry/exit instruction sequences introduced by this patch was measured as 0.3ns in the case where IA is left enabled, and 33.0ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5 Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-18 20:10:53 -07:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: uaccess: Fix omissions from usercopy whitelist When the hardend usercopy support was added for arm64, it was concluded that all cases of usercopy into and out of thread_struct were statically sized and so didn't require explicit whitelisting of the appropriate fields in thread_struct. Testing with usercopy hardening enabled has revealed that this is not the case for certain ptrace regset manipulation calls on arm64. This occurs because the sizes of usercopies associated with the regset API are dynamic by construction, and because arm64 does not always stage such copies via the stack: indeed the regset API is designed to avoid the need for that by adding some bounds checking. This is currently believed to affect only the fpsimd and TLS registers. Because the whitelisted fields in thread_struct must be contiguous, this patch groups them together in a nested struct. It is also necessary to be able to determine the location and size of that struct, so rather than making the struct anonymous (which would save on edits elsewhere) or adding an anonymous union containing named and unnamed instances of the same struct (gross), this patch gives the struct a name and makes the necessary edits to code that references it (noisy but simple). Care is needed to ensure that the new struct does not contain padding (which the usercopy hardening would fail to protect). For this reason, the presence of tp2_value is made unconditional, since a padding field would be needed there in any case. This pads up to the 16-byte alignment required by struct user_fpsimd_state. Acked-by: Kees Cook <keescook@chromium.org> Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9e8084d3f761 ("arm64: Implement thread_struct whitelist for hardened usercopy") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-28 10:50:49 +01:00
arm64: fpsimd: Eliminate task->mm checks Currently the FPSIMD handling code uses the condition task->mm == NULL as a hint that task has no FPSIMD register context. The ->mm check is only there to filter out tasks that cannot possibly have FPSIMD context loaded, for optimisation purposes. Also, TIF_FOREIGN_FPSTATE must always be checked anyway before saving FPSIMD context back to memory. For these reasons, the ->mm checks are not useful, providing that TIF_FOREIGN_FPSTATE is maintained in a consistent way for all threads. The context switch logic is already deliberately optimised to defer reloads of the regs until ret_to_user (or sigreturn as a special case), and save them only if they have been previously loaded. These paths are the only places where the wrong_task and wrong_cpu conditions can be made false, by calling fpsimd_bind_task_to_cpu(). Kernel threads by definition never reach these paths. As a result, the wrong_task and wrong_cpu tests in fpsimd_thread_switch() will always yield true for kernel threads. This patch removes the redundant checks and special-case code, ensuring that TIF_FOREIGN_FPSTATE is set whenever a kernel thread is scheduled in, and ensures that this flag is set for the init task. The fpsimd_flush_task_state() call already present in copy_thread() ensures the same for any new task. With TIF_FOREIGN_FPSTATE always set for kernel threads, this patch ensures that no extra context save work is added for kernel threads, and eliminates the redundant context saving that may currently occur for kernel threads that have acquired an mm via use_mm(). Signed-off-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-21 19:08:15 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: preserve pt_regs::stackframe during exec*() When performing an exec*(), there's a transient period before the return to userspace where any stacktrace will result in a warning triggered by kunwind_next_frame_record_meta() encountering a struct frame_record_meta with an unknown type. This can be seen fairly reliably by enabling KASAN or KFENCE, e.g. | WARNING: CPU: 3 PID: 143 at arch/arm64/kernel/stacktrace.c:223 arch_stack_walk+0x264/0x3b0 | Modules linked in: | CPU: 3 UID: 0 PID: 143 Comm: login Not tainted 6.12.0-rc2-00010-g0f0b9a3f6a50 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : arch_stack_walk+0x264/0x3b0 | lr : arch_stack_walk+0x1ec/0x3b0 | sp : ffff80008060b970 | x29: ffff80008060ba10 x28: fff00000051133c0 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: fff000007fe84000 | x23: ffff9d1b3c940af0 x22: 0000000000000000 x21: fff00000051133c0 | x20: ffff80008060ba50 x19: ffff9d1b3c9408e0 x18: 0000000000000014 | x17: 000000006d50da47 x16: 000000008e3f265e x15: fff0000004e8bf40 | x14: 0000ffffc5e50e48 x13: 000000000000000f x12: 0000ffffc5e50fed | x11: 000000000000001f x10: 000018007f8bffff x9 : 0000000000000000 | x8 : ffff80008060b9c0 x7 : ffff80008060bfd8 x6 : ffff80008060ba80 | x5 : ffff80008060ba00 x4 : ffff80008060c000 x3 : ffff80008060bff0 | x2 : 0000000000000018 x1 : ffff80008060bfd8 x0 : 0000000000000000 | Call trace: | arch_stack_walk+0x264/0x3b0 (P) | arch_stack_walk+0x1ec/0x3b0 (L) | stack_trace_save+0x50/0x80 | metadata_update_state+0x98/0xa0 | kfence_guarded_free+0xec/0x2c4 | __kfence_free+0x50/0x100 | kmem_cache_free+0x1a4/0x37c | putname+0x9c/0xc0 | do_execveat_common.isra.0+0xf0/0x1e4 | __arm64_sys_execve+0x40/0x60 | invoke_syscall+0x48/0x104 | el0_svc_common.constprop.0+0x40/0xe0 | do_el0_svc+0x1c/0x28 | el0_svc+0x34/0xe0 | el0t_64_sync_handler+0x120/0x12c | el0t_64_sync+0x198/0x19c This happens because start_thread_common() zeroes the entirety of current_pt_regs(), including pt_regs::stackframe::type, changing this from FRAME_META_TYPE_FINAL to 0 and making the final record invalid. The stacktrace code will reject this until the next return to userspace, where a subsequent exception entry will reinitialize the type to FRAME_META_TYPE_FINAL. This zeroing wasn't a problem prior to commit: c2c6b27b5aa14fa2 ("arm64: stacktrace: unwind exception boundaries") ... as before that commit the stacktrace code only expected the final pt_regs::stackframe to contain zeroes, which was unchanged by start_thread_common(). A stacktrace could occur at any time, either due to instrumentation or an exception, and so start_thread_common() must ensure that pt_regs::stackframe is always valid. Fix this by changing the way start_thread_common() zeroes and reinitializes the pt_regs fields: * The '{regs,pc,pstate}' fields are initialized in one go via a struct assignment to the user_regs, with start_thread() and compat_start_thread() modified to pass 'pstate' into start_thread_common(). * The 'sp' and 'compat_sp' fields are zeroed by the struct assignment in start_thread_common(), and subsequently overwritten in start_thread() and compat_start_thread respectively, matching existing behaviour. * The 'syscallno' field is implicitly preserved while the 'orig_x0' field is explicitly zeroed, maintaining existing ABI. * The 'pmr' field is explicitly initialized, as necessary for an exec*() from a kernel thread, matching existing behaviour. * The 'stackframe' field is implicitly preserved, with a new comment and some assertions to ensure we don't accidentally break this in future. * All other fields are implicitly preserved, and should have no functional impact: - 'sdei_ttbr1' is only used for SDEI exception entry/exit, and we never exec*() inside an SDEI handler. - 'lockdep_hardirqs' and 'exit_rcu' are only used for EL1 exception entry/exit, and we never exec*() inside an EL1 exception handler. While updating compat_start_thread() to pass 'pstate' into start_thread_common(), I've also updated the logic to remove the ifdeffery, replacing: | #ifdef __AARCH64EB__ | regs->pstate |= PSR_AA32_E_BIT; | #endif ... with: | if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) | pstate |= PSR_AA32_E_BIT; ... which should be functionally equivalent, and matches our preferred code style. Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Puranjay Mohan <puranjay12@gmail.com> Cc: Will Deacon <will@kernel.org> Fixes: c2c6b27b5aa1 ("arm64: stacktrace: unwind exception boundaries") Tested-by: Puranjay Mohan <puranjay12@gmail.com> Reviewed-by: Puranjay Mohan <puranjay12@gmail.com> Link: https://lore.kernel.org/r/20241021164456.2275285-1-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-10-21 17:44:56 +01:00
arm64: kernel: remove {THREAD,IRQ_STACK}_START_SP For historical reasons, we leave the top 16 bytes of our task and IRQ stacks unused, a practice used to ensure that the SP can always be masked to find the base of the current stack (historically, where thread_info could be found). However, this is not necessary, as: * When an exception is taken from a task stack, we decrement the SP by S_FRAME_SIZE and stash the exception registers before we compare the SP against the task stack. In such cases, the SP must be at least S_FRAME_SIZE below the limit, and can be safely masked to determine whether the task stack is in use. * When transitioning to an IRQ stack, we'll place a dummy frame onto the IRQ stack before enabling asynchronous exceptions, or executing code we expect to trigger faults. Thus, if an exception is taken from the IRQ stack, the SP must be at least 16 bytes below the limit. * We no longer mask the SP to find the thread_info, which is now found via sp_el0. Note that historically, the offset was critical to ensure that cpu_switch_to() found the correct stack for new threads that hadn't yet executed ret_from_fork(). Given that, this initial offset serves no purpose, and can be removed. This brings us in-line with other architectures (e.g. x86) which do not rely on this masking. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [Mark: rebase, kill THREAD_START_SP, commit msg additions] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com>
2017-07-20 17:15:45 +01:00
arm64: signal: Report signal frame size to userspace via auxv Stateful CPU architecture extensions may require the signal frame to grow to a size that exceeds the arch's MINSIGSTKSZ #define. However, changing this #define is an ABI break. To allow userspace the option of determining the signal frame size in a more forwards-compatible way, this patch adds a new auxv entry tagged with AT_MINSIGSTKSZ, which provides the maximum signal frame size that the process can observe during its lifetime. If AT_MINSIGSTKSZ is absent from the aux vector, the caller can assume that the MINSIGSTKSZ #define is sufficient. This allows for a consistent interface with older kernels that do not provide AT_MINSIGSTKSZ. The idea is that libc could expose this via sysconf() or some similar mechanism. There is deliberately no AT_SIGSTKSZ. The kernel knows nothing about userspace's own stack overheads and should not pretend to know. For arm64: The primary motivation for this interface is the Scalable Vector Extension, which can require at least 4KB or so of extra space in the signal frame for the largest hardware implementations. To determine the correct value, a "Christmas tree" mode (via the add_all argument) is added to setup_sigframe_layout(), to simulate addition of all possible records to the signal frame at maximum possible size. If this procedure goes wrong somehow, resulting in a stupidly large frame layout and hence failure of sigframe_alloc() to allocate a record to the frame, then this is indicative of a kernel bug. In this case, we WARN() and no attempt is made to populate AT_MINSIGSTKSZ for userspace. For arm64 SVE: The SVE context block in the signal frame needs to be considered too when computing the maximum possible signal frame size. Because the size of this block depends on the vector length, this patch computes the size based not on the thread's current vector length but instead on the maximum possible vector length: this determines the maximum size of SVE context block that can be observed in any signal frame for the lifetime of the process. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-01 11:10:14 +01:00
arm64: Introduce prctl(PR_PAC_{SET,GET}_ENABLED_KEYS) This change introduces a prctl that allows the user program to control which PAC keys are enabled in a particular task. The main reason why this is useful is to enable a userspace ABI that uses PAC to sign and authenticate function pointers and other pointers exposed outside of the function, while still allowing binaries conforming to the ABI to interoperate with legacy binaries that do not sign or authenticate pointers. The idea is that a dynamic loader or early startup code would issue this prctl very early after establishing that a process may load legacy binaries, but before executing any PAC instructions. This change adds a small amount of overhead to kernel entry and exit due to additional required instruction sequences. On a DragonBoard 845c (Cortex-A75) with the powersave governor, the overhead of similar instruction sequences was measured as 4.9ns when simulating the common case where IA is left enabled, or 43.7ns when simulating the uncommon case where IA is disabled. These numbers can be seen as the worst case scenario, since in more realistic scenarios a better performing governor would be used and a newer chip would be used that would support PAC unlike Cortex-A75 and would be expected to be faster than Cortex-A75. On an Apple M1 under a hypervisor, the overhead of the entry/exit instruction sequences introduced by this patch was measured as 0.3ns in the case where IA is left enabled, and 33.0ns in the case where IA is disabled. Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5 Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-03-18 20:10:53 -07:00
arm64: Implement prctl(PR_{G,S}ET_TSC) On arm64, this prctl controls access to CNTVCT_EL0, CNTVCTSS_EL0 and CNTFRQ_EL0 via CNTKCTL_EL1.EL0VCTEN. Since this bit is also used to implement various erratum workarounds, check whether the CPU needs a workaround whenever we potentially need to change it. This is needed for a correct implementation of non-instrumenting record-replay debugging on arm64 (i.e. rr; https://rr-project.org/). rr must trap and record any sources of non-determinism from the userspace program's perspective so it can be replayed later. This includes the results of syscalls as well as the results of access to architected timers exposed directly to the program. This prctl was originally added for x86 by commit 8fb402bccf20 ("generic, x86: add prctl commands PR_GET_TSC and PR_SET_TSC"), and rr uses it to trap RDTSC on x86 for the same reason. We also considered exposing this as a PTRACE_EVENT. However, prctl seems like a better choice for these reasons: 1) In general an in-process control seems more useful than an out-of-process control, since anything that you would be able to do with ptrace could also be done with prctl (tracer can inject a call to the prctl and handle signal-delivery-stops), and it avoids needing an additional process (which will complicate debugging of the ptraced process since it cannot have more than one tracer, and will be incompatible with ptrace_scope=3) in cases where that is not otherwise necessary. 2) Consistency with x86_64. Note that on x86_64, RDTSC has been there since the start, so it's the same situation as on arm64. Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I233a1867d1ccebe2933a347552e7eae862344421 Link: https://lore.kernel.org/r/20240824015415.488474-1-pcc@google.com Signed-off-by: Will Deacon <will@kernel.org>
2024-08-23 18:54:13 -07:00