linux/drivers/acpi/acpi_dbg.c

785 lines
18 KiB

remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
ACPI: debug: fix signedness issues in read/write helpers In the ACPI debugger interface, the helper functions for read and write operations use "int" as the length parameter data type. When a large "size_t count" is passed from the file operations, this cast to "int" results in truncation and a negative value due to signed integer representation. Logically, this negative number propagates to the min() calculation, where it is selected over the positive buffer space value, leading to unexpected behavior. Subsequently, when this negative value is used in copy_to_user() or copy_from_user(), it is interpreted as a large positive value due to the unsigned nature of the size parameter in these functions, causing the copy operations to attempt handling sizes far beyond the intended buffer limits. Address the issue by: - Changing the length parameters in acpi_aml_read_user() and acpi_aml_write_user() from "int" to "size_t", aligning with the expected unsigned size semantics. - Updating return types and local variables in acpi_aml_read() and acpi_aml_write() to "ssize_t" for consistency with kernel file operation conventions. - Using "size_t" for the "n" variable to ensure calculations remain unsigned. - Using min_t() for circ_count_to_end() and circ_space_to_end() to ensure type-safe comparisons and prevent integer overflow. Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com> Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com [ rjw: Changelog tweaks, local variable definitions ordering adjustments ] Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Cc: 4.5+ <stable@vger.kernel.org> # 4.5+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-09-23 05:01:13 +03:30
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
remove lots of IS_ERR_VALUE abuses Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-27 23:23:25 +02:00
ACPI: debug: don't allow debugging when ACPI is disabled If ACPI is disabled then loading the acpi_dbg module will result in the following splat when lock debugging is enabled. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:938 __mutex_lock+0xa10/0x1290 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc8+ #103 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x4d8 show_stack+0x34/0x48 dump_stack+0x174/0x1f8 panic+0x360/0x7a0 __warn+0x244/0x2ec report_bug+0x240/0x398 bug_handler+0x50/0xc0 call_break_hook+0x160/0x1d8 brk_handler+0x30/0xc0 do_debug_exception+0x184/0x340 el1_dbg+0x48/0xb0 el1_sync_handler+0x170/0x1c8 el1_sync+0x80/0x100 __mutex_lock+0xa10/0x1290 mutex_lock_nested+0x6c/0xc0 acpi_register_debugger+0x40/0x88 acpi_aml_init+0xc4/0x114 do_one_initcall+0x24c/0xb10 kernel_init_freeable+0x690/0x728 kernel_init+0x20/0x1e8 ret_from_fork+0x10/0x18 This is because acpi_debugger.lock has not been initialized as acpi_debugger_init() is not called when ACPI is disabled. Fail module loading to avoid this and any subsequent problems that might arise by trying to debug AML when ACPI is disabled. Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities") Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-12 14:04:46 +01:00