linux/drivers/gpu/drm/mcde/mcde_drv.c

521 lines
14 KiB

drm/fb: rename FB CMA helpers to FB DMA helpers Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-08-02 02:04:02 +02:00
drm/mcde: Fix display pipeline restart To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-09 00:31:21 +02:00
drm/fb: rename FB CMA helpers to FB DMA helpers Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-08-02 02:04:02 +02:00
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
drm/<drivers>: Constify struct drm_driver Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: kernel test robot <lkp@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
2020-11-04 11:04:24 +01:00
drm/prime: Actually remove DRIVER_PRIME everywhere Split out to make the functional changes stick out more. All places where DRIVER_PRIME was used have been removed in previous patches already. v2: amdgpu gained DRIVER_SYNCOBJ_TIMELINE. v3: amdgpu lost DRIVER_SYNCOBJ_TIMELINE. v4: Don't add a space in i915_drv.c (Sam) v5: Add note that previous patches removed all the DRIVER_PRIME users already (Emil). v6: Fixupe ingenic (new driver) while applying. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: amd-gfx@lists.freedesktop.org Cc: etnaviv@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: lima@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-aspeed@lists.ozlabs.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Cc: spice-devel@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: xen-devel@lists.xenproject.org Link: https://patchwork.freedesktop.org/patch/msgid/20190617153924.414-1-daniel.vetter@ffwll.ch
2019-06-17 17:39:24 +02:00
drm/gem: rename GEM CMA helpers to GEM DMA helpers Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-02 02:04:03 +02:00
drm/mcde: Fix display pipeline restart To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-09 00:31:21 +02:00
drm/mcde: Fix display pipeline restart To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-09 00:31:21 +02:00
drm/mcde: Fix display pipeline restart To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-09 00:31:21 +02:00
drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers Based on grepping through the source code these drivers appear to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. All of the drivers in this patch were fairly straightforward to fix since they already had a call to drm_atomic_helper_shutdown() at remove/unbind time but were just lacking one at system shutdown. The only hitch is that some of these drivers use the component model to register/unregister their DRM devices. The shutdown callback is part of the original device. The typical solution here, based on how other DRM drivers do this, is to keep track of whether the device is bound based on drvdata. In most cases the drvdata is the drm_device, so we can just make sure it is NULL when the device is not bound. In some drivers, this required minor code changes. To make things simpler, drm_atomic_helper_shutdown() has been modified to consider a NULL drm_device as a noop in the patch ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"). Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
2023-09-01 16:39:53 -07:00
drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers Based on grepping through the source code these drivers appear to be missing a call to drm_atomic_helper_shutdown() at system shutdown time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart comes straight out of the kernel doc "driver instance overview" in drm_drv.c. All of the drivers in this patch were fairly straightforward to fix since they already had a call to drm_atomic_helper_shutdown() at remove/unbind time but were just lacking one at system shutdown. The only hitch is that some of these drivers use the component model to register/unregister their DRM devices. The shutdown callback is part of the original device. The typical solution here, based on how other DRM drivers do this, is to keep track of whether the device is bound based on drvdata. In most cases the drvdata is the drm_device, so we can just make sure it is NULL when the device is not bound. In some drivers, this required minor code changes. To make things simpler, drm_atomic_helper_shutdown() has been modified to consider a NULL drm_device as a noop in the patch ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"). Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Tested-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.2.I9115e5d094a43e687978b0699cc1fe9f2a3452ea@changeid
2023-09-01 16:39:53 -07:00