linux/drivers/hv/mshv_root_main.c

2417 lines
61 KiB

Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add debugfs to view hypervisor statistics Introduce a debugfs interface to expose root and child partition stats when running with mshv_root. Create a debugfs directory "mshv" containing 'stats' files organized by type and id. A stats file contains a number of counters depending on its type. e.g. an excerpt from a VP stats file: TotalRunTime : 1997602722 HypervisorRunTime : 649671371 RemoteNodeRunTime : 0 NormalizedRunTime : 1997602721 IdealCpu : 0 HypercallsCount : 1708169 HypercallsTime : 111914774 PageInvalidationsCount : 0 PageInvalidationsTime : 0 On a root partition with some active child partitions, the entire directory structure may look like: mshv/ stats # hypervisor stats lp/ # logical processors 0/ # LP id stats # LP 0 stats 1/ 2/ 3/ partition/ # partition stats 1/ # root partition id stats # root partition stats vp/ # root virtual processors 0/ # root VP id stats # root VP 0 stats 1/ 2/ 3/ 42/ # child partition id stats # child partition stats vp/ # child VPs 0/ # child VP id stats # child VP 0 stats 1/ 43/ 55/ On L1VH, some stats are not present as it does not own the hardware like the root partition does: - The hypervisor and lp stats are not present - L1VH's partition directory is named "self" because it can't get its own id - Some of L1VH's partition and VP stats fields are not populated, because it can't map its own HV_STATS_AREA_PARENT page. Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Acked-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-01-28 10:11:46 -08:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00
mshv: Add support for integrated scheduler Query the hypervisor for integrated scheduler support and use it if configured. Microsoft Hypervisor originally provided two schedulers: root and core. The root scheduler allows the root partition to schedule guest vCPUs across physical cores, supporting both time slicing and CPU affinity (e.g., via cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core scheduling entirely to the hypervisor. Direct virtualization introduces a new privileged guest partition type - L1 Virtual Host (L1VH) — which can create child partitions from its own resources. These child partitions are effectively siblings, scheduled by the hypervisor's core scheduler. This prevents the L1VH parent from setting affinity or time slicing for its own processes or guest VPs. While cgroups, CFS, and cpuset controllers can still be used, their effectiveness is unpredictable, as the core scheduler swaps vCPUs according to its own logic (typically round-robin across all allocated physical CPUs). As a result, the system may appear to "steal" time from the L1VH and its children. To address this, Microsoft Hypervisor introduces the integrated scheduler. This allows an L1VH partition to schedule its own vCPUs and those of its guests across its "physical" cores, effectively emulating root scheduler behavior within the L1VH, while retaining core scheduler behavior for the rest of the system. The integrated scheduler is controlled by the root partition and gated by the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor supports the integrated scheduler. The L1VH partition must then check if it is enabled by querying the corresponding extended partition property. If this property is true, the L1VH partition must use the root scheduler logic; otherwise, it must use the core scheduler. This requirement makes reading VMM capabilities in L1VH partition a requirement too. Signed-off-by: Andreea Pintilie <anpintil@microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2026-02-18 19:11:40 +00:00
Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs Provide a set of IOCTLs for creating and managing child partitions when running as root partition on Hyper-V. The new driver is enabled via CONFIG_MSHV_ROOT. A brief overview of the interface: MSHV_CREATE_PARTITION is the entry point, returning a file descriptor representing a child partition. IOCTLs on this fd can be used to map memory, create VPs, etc. Creating a VP returns another file descriptor representing that VP which in turn has another set of corresponding IOCTLs for running the VP, getting/setting state, etc. MSHV_ROOT_HVCALL is a generic "passthrough" hypercall IOCTL which can be used for a number of partition or VP hypercalls. This is for hypercalls that do not affect any state in the kernel driver, such as getting and setting VP registers and partition properties, translating addresses, etc. It is "passthrough" because the binary input and output for the hypercall is only interpreted by the VMM - the kernel driver does nothing but insert the VP and partition id where necessary (which are always in the same place), and execute the hypercall. Co-developed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com> Co-developed-by: Jinank Jain <jinankjain@microsoft.com> Signed-off-by: Jinank Jain <jinankjain@microsoft.com> Co-developed-by: Mukesh Rathor <mrathor@linux.microsoft.com> Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com> Co-developed-by: Muminul Islam <muislam@microsoft.com> Signed-off-by: Muminul Islam <muislam@microsoft.com> Co-developed-by: Praveen K Paladugu <prapal@linux.microsoft.com> Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Co-developed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com> Co-developed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com> Reviewed-by: Roman Kisel <romank@linux.microsoft.com> Link: https://lore.kernel.org/r/1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1741980536-3865-11-git-send-email-nunodasneves@linux.microsoft.com>
2025-03-14 12:28:56 -07:00