kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-15 19:56:03 +00:00
Code Issues Releases Packages Activity
linux/drivers/input/touchscreen/wm831x-ts.c

398 lines
11 KiB
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 08:55:01 +02:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x-ts - move BTN_TOUCH reporting to data transfer Don't report BTN_TOUCH until we've got data as some less robust applications can be confused by getting a touch event by itself and it doesn't seem unreasonable for them to expect coordinates along with a touch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:09:26 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - ensure the controller is in a known state on open Explicitly set all the enable bits when opening the device just in case something left the device in an unexpected state. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-14 21:39:09 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
workqueue: deprecate flush[_delayed]_work_sync() flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-20 14:51:24 -07:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-23 21:38:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - allow IRQ flags to be specified This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:51 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - remove use of ternary operator While being applied the driver was modified to add use of the ternary operator. Write the conditionals out longhand as I find it terribly unhelpful for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-31 21:09:25 -08:00
Input: wm831x-ts - convert to devm_kzalloc() Saves a little code and eliminates the possibility of introducing some leaks. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-11 00:42:34 -07:00
Input: wm831x-ts - convert to devm_input_allocate_device() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24 09:44:43 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - fix races with IRQ management If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:34 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
mfd: Convert wm831x to irq_domain The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-14 23:14:24 +02:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
mfd: Convert wm831x to irq_domain The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-14 23:14:24 +02:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - default pressure measurements on tslib expects pressure measurements so enable them by default for better compatibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-12 20:48:34 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
treewide: Use fallthrough pseudo-keyword Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - allow IRQ flags to be specified This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:51 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: move to use request_irq by IRQF_NO_AUTOEN flag disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25 14:43:18 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - allow IRQ flags to be specified This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:51 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - allow IRQ flags to be specified This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27 23:08:51 -07:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: wm831x-ts - convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230920125829.1478827-52-u.kleine-koenig@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2023-09-20 14:58:28 +02:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: switch back to struct platform_driver::remove() After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/input/ to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. While touching these files, make indention of the struct initializer consistent in a few drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20241008090009.462836-2-u.kleine-koenig@baylibre.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-10-08 11:00:10 +02:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00
Input: touchscreen - use macro module_platform_driver() Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-29 11:14:13 -08:00
Input: wm831x - add driver for Wolfson WM831x PMIC touchscreen controllers Some of the WM831x series of PMICs from Wolfson Microelectronics include a resistive touchscreen controller. Implement support for these controllers within the input API. Platform data is supported to allow configuration of system parameters such as selection between four and five wire touchscreens and for specification of optional direct to CPU IRQs for sample availability and for pen down. Use of this feature for at least the data IRQ is strongly recommended. Thanks to Julien Boibessot for extensive testing and detailed feedback. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-01-30 12:31:30 -08:00