linux/drivers/iommu/intel/pasid.h

326 lines
8.4 KiB

iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set. Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Dmytro Maluka <dmaluka@chromium.org> Reviewed-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260120061816.2132558-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2026-01-22 09:48:54 +08:00
iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set. Fixes: 0bbeb01a4faf ("iommu/vt-d: Manage scalalble mode PASID tables") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Dmytro Maluka <dmaluka@chromium.org> Reviewed-by: Samiullah Khawaja <skhawaja@google.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20260120061816.2132558-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2026-01-22 09:48:54 +08:00
iommu/vt-d: Access/Dirty bit support for SS domains IOMMU advertises Access/Dirty bits for second-stage page table if the extended capability DMAR register reports it (ECAP, mnemonic ECAP.SSADS). The first stage table is compatible with CPU page table thus A/D bits are implicitly supported. Relevant Intel IOMMU SDM ref for first stage table "3.6.2 Accessed, Extended Accessed, and Dirty Flags" and second stage table "3.7.2 Accessed and Dirty Flags". First stage page table is enabled by default so it's allowed to set dirty tracking and no control bits needed, it just returns 0. To use SSADS, set bit 9 (SSADE) in the scalable-mode PASID table entry and flush the IOTLB via pasid_flush_caches() following the manual. Relevant SDM refs: "3.7.2 Accessed and Dirty Flags" "6.5.3.3 Guidance to Software for Invalidations, Table 23. Guidance to Software for Invalidations" PTE dirty bit is located in bit 9 and it's cached in the IOTLB so flush IOTLB to make sure IOMMU attempts to set the dirty bit again. Note that iommu_dirty_bitmap_record() will add the IOVA to iotlb_gather and thus the caller of the iommu op will flush the IOTLB. Relevant manuals over the hardware translation is chapter 6 with some special mention to: "6.2.3.1 Scalable-Mode PASID-Table Entry Programming Considerations" "6.2.4 IOTLB" Select IOMMUFD_DRIVER only if IOMMUFD is enabled, given that IOMMU dirty tracking requires IOMMUFD. Link: https://lore.kernel.org/r/20231024135109.73787-13-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-10-24 14:51:03 +01:00