linux/drivers/mmc/host/cavium.c

1076 lines
28 KiB

mmc: cavium: Add the missing dma unmap when the dma has finished. This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled. DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800] WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270 Modules linked in: CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO) pc : debug_dma_assert_idle+0x1f8/0x270 lr : debug_dma_assert_idle+0x1f8/0x270 sp : ffff0000113cfc10 x29: ffff0000113cfc10 x28: 0000ffff8c880000 x27: ffff800bc72a0000 x26: ffff000010ff8000 x25: ffff000010ff8940 x24: ffff000010ff8968 x23: 0000000000000000 x22: ffff000010e83700 x21: ffff000010ea2000 x20: ffff000010e835c8 x19: ffff800bc2c73300 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6d20616d64206576 x13: 69746361206e6120 x12: 676e696863756f74 x11: 20757063203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 3230303030303030 x7 : 00000000000002fd x6 : ffff000010fd57d0 x5 : 0000000000000000 x4 : ffff0000106c5210 x3 : 00000000ffffffff x2 : 0000800bee9c0000 x1 : 57d5843f4aa62800 x0 : 0000000000000000 Call trace: debug_dma_assert_idle+0x1f8/0x270 wp_page_copy+0xb0/0x688 do_wp_page+0xa8/0x5b8 __handle_mm_fault+0x600/0xd00 handle_mm_fault+0x118/0x1e8 do_page_fault+0x200/0x500 do_mem_abort+0x50/0xb0 el0_da+0x20/0x24 ---[ end trace a005534bd23e109f ]--- DMA-API: Mapped at: debug_dma_map_sg+0x94/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 Signed-off-by: Kevin Hao <haokexin@gmail.com> Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-26 10:30:49 +08:00
mmc: core: Delete bounce buffer Kconfig option This option is activated by all multiplatform configs and what not so we almost always have it turned on, and the memory it saves is negligible, even more so moving forward. The actual bounce buffer only gets allocated only when used, the only thing the ifdefs are saving is a little bit of code. It is highly improper to have this as a Kconfig option that get turned on by Kconfig, make this a pure runtime-thing and let the host decide whether we use bounce buffers. We add a new property "disable_bounce" to the host struct. Notice that mmc_queue_calc_bouncesz() already disables the bounce buffers if host->max_segs != 1, so any arch that has a maximum number of segments higher than 1 will have bounce buffers disabled. The option CONFIG_MMC_BLOCK_BOUNCE is default y so the majority of platforms in the kernel already have it on, and it then gets turned off at runtime since most of these have a host->max_segs > 1. The few exceptions that have host->max_segs == 1 and still turn off the bounce buffering are those that disable it in their defconfig. Those are the following: arch/arm/configs/colibri_pxa300_defconfig arch/arm/configs/zeus_defconfig - Uses MMC_PXA, drivers/mmc/host/pxamci.c - Sets host->max_segs = NR_SG, which is 1 - This needs its bounce buffer deactivated so we set host->disable_bounce to true in the host driver arch/arm/configs/davinci_all_defconfig - Uses MMC_DAVINCI, drivers/mmc/host/davinci_mmc.c - This driver sets host->max_segs to MAX_NR_SG, which is 16 - That means this driver anyways disabled bounce buffers - No special action needed for this platform arch/arm/configs/lpc32xx_defconfig arch/arm/configs/nhk8815_defconfig arch/arm/configs/u300_defconfig - Uses MMC_ARMMMCI, drivers/mmc/host/mmci.[c|h] - This driver by default sets host->max_segs to NR_SG, which is 128, unless a DMA engine is used, and in that case the number of segments are also > 1 - That means this driver already disables bounce buffers - No special action needed for these platforms arch/arm/configs/sama5_defconfig - Uses MMC_SDHCI, MMC_SDHCI_PLTFM, MMC_SDHCI_OF_AT91, MMC_ATMELMCI - Uses drivers/mmc/host/sdhci.c - Normally sets host->max_segs to SDHCI_MAX_SEGS which is 128 and thus disables bounce buffers - Sets host->max_segs to 1 if SDHCI_USE_SDMA is set - SDHCI_USE_SDMA is only set by SDHCI on PCI adapers - That means that for this platform bounce buffers are already disabled at runtime - No special action needed for this platform arch/blackfin/configs/CM-BF533_defconfig arch/blackfin/configs/CM-BF537E_defconfig - Uses MMC_SPI (a simple MMC card connected on SPI pins) - Uses drivers/mmc/host/mmc_spi.c - Sets host->max_segs to MMC_SPI_BLOCKSATONCE which is 128 - That means this platform already disables bounce buffers at runtime - No special action needed for these platforms arch/mips/configs/cavium_octeon_defconfig - Uses MMC_CAVIUM_OCTEON, drivers/mmc/host/cavium.c - Sets host->max_segs to 16 or 1 - Setting host->disable_bounce to be sure for the 1 case arch/mips/configs/qi_lb60_defconfig - Uses MMC_JZ4740, drivers/mmc/host/jz4740_mmc.c - This sets host->max_segs to 128 so bounce buffers are already runtime disabled - No action needed for this platform It would be interesting to come up with a list of the platforms that actually end up using bounce buffers. I have not been able to infer such a list, but it occurs when host->max_segs == 1 and the bounce buffering is not explicitly disabled. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-05-18 11:29:31 +02:00
mmc: cavium: Set the correct dma max segment size for mmc_host We have set the mmc_host.max_seg_size to 8M, but the dma max segment size of PCI device is set to 64K by default in function pci_device_add(). The mmc_host.max_seg_size is used to set the max segment size of the blk queue. Then this mismatch will trigger a calltrace like below when a bigger than 64K segment request arrives at mmc dev. So we should consider the limitation of the cvm_mmc_host when setting the mmc_host.max_seg_size. DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536] WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350 Modules linked in: CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62 Hardware name: Marvell OcteonTX CN96XX board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : debug_dma_map_sg+0x2b8/0x350 lr : debug_dma_map_sg+0x2b8/0x350 sp : ffff00001770f9e0 x29: ffff00001770f9e0 x28: ffffffff00000000 x27: 00000000ffffffff x26: ffff800bc2c73180 x25: ffff000010e83700 x24: 0000000000000002 x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 x20: ffff800bc48ba0b0 x19: ffff800bc97e8c00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6874207265676e6f x13: 6c20746e656d6765 x12: 7320677320676e69 x11: 7070616d203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 35363d78616d5b20 x7 : 00000000000002fd x6 : ffff000010fd57dc x5 : 0000000000000000 x4 : ffff0000106c61f0 x3 : 00000000ffffffff x2 : 0000800bee060000 x1 : 7010678df3041a00 x0 : 0000000000000000 Call trace: debug_dma_map_sg+0x2b8/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 mmc_mq_queue_rq+0x11c/0x278 blk_mq_dispatch_rq_list+0xb0/0x568 blk_mq_do_dispatch_sched+0x6c/0x108 blk_mq_sched_dispatch_requests+0x110/0x1b8 __blk_mq_run_hw_queue+0xb0/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x210/0x490 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Signed-off-by: Kevin Hao <haokexin@gmail.com> Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-26 10:30:48 +08:00