linux/drivers/nvme/host/hwmon.c

281 lines
6.3 KiB

nvme: hwmon: switch to use <linux/units.h> helpers This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30 22:15:53 -08:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: switch to use <linux/units.h> helpers This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30 22:15:53 -08:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: switch to use <linux/units.h> helpers This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30 22:15:53 -08:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: switch to use <linux/units.h> helpers This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30 22:15:53 -08:00
nvme: hwmon: switch to use <linux/units.h> helpers This switches the nvme driver to use kelvin_to_millicelsius() and millicelsius_to_kelvin() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30 22:15:53 -08:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme: hwmon: provide temperature min and max values for each sensor According to the NVMe specification, the over temperature threshold and under temperature threshold features shall be implemented for Composite Temperature if a non-zero WCTEMP field value is reported in the Identify Controller data structure. The features are also implemented for all implemented temperature sensors (i.e., all Temperature Sensor fields that report a non-zero value). This provides the over temperature threshold and under temperature threshold for each sensor as temperature min and max values of hwmon sysfs attributes. The WCTEMP is already provided as a temperature max value for Composite Temperature, but this change isn't incompatible. Because the default value of the over temperature threshold for Composite Temperature is the WCTEMP. Now the alarm attribute for Composite Temperature indicates one of the temperature is outside of a temperature threshold. Because there is only a single bit in Critical Warning field that indicates a temperature is outside of a threshold. Example output from the "sensors" command: nvme-pci-0100 Adapter: PCI adapter Composite: +33.9°C (low = -273.1°C, high = +69.8°C) (crit = +79.8°C) Sensor 1: +34.9°C (low = -273.1°C, high = +65261.8°C) Sensor 2: +31.9°C (low = -273.1°C, high = +65261.8°C) Sensor 5: +47.9°C (low = -273.1°C, high = +65261.8°C) This also adds helper macros for kelvin from/to milli Celsius conversion, and replaces the repeated code in hwmon.c. Cc: Keith Busch <kbusch@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jean Delvare <jdelvare@suse.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
2019-11-15 00:40:00 +09:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00
nvme-hwmon: kmalloc the NVME SMART log buffer Recent commit 52fde2c07da6 ("nvme: set dma alignment to dword") has caused a regression on our platform. It turned out that the nvme_get_log() method invocation caused the nvme_hwmon_data structure instance corruption. In particular the nvme_hwmon_data.ctrl pointer was overwritten either with zeros or with garbage. After some research we discovered that the problem happened even before the actual NVME DMA execution, but during the buffer mapping. Since our platform is DMA-noncoherent, the mapping implied the cache-line invalidations or write-backs depending on the DMA-direction parameter. In case of the NVME SMART log getting the DMA was performed from-device-to-memory, thus the cache-invalidation was activated during the buffer mapping. Since the log-buffer isn't cache-line aligned, the cache-invalidation caused the neighbour data to be discarded. The neighbouring data turned to be the data surrounding the buffer in the framework of the nvme_hwmon_data structure. In order to fix that we need to make sure that the whole log-buffer is defined within the cache-line-aligned memory region so the cache-invalidation procedure wouldn't involve the adjacent data. One of the option to guarantee that is to kmalloc the DMA-buffer [1]. Seeing the rest of the NVME core driver prefer that method it has been chosen to fix this problem too. Note after a deeper researches we found out that the denoted commit wasn't a root cause of the problem. It just revealed the invalidity by activating the DMA-based NVME SMART log getting performed in the framework of the NVME hwmon driver. The problem was here since the initial commit of the driver. [1] Documentation/core-api/dma-api-howto.rst Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-18 17:33:52 +02:00