linux/fs/afs/vl_probe.c

310 lines
8 KiB

rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 14:54:34 +01:00
rxrpc, afs: Allow afs to pin rxrpc_peer objects Change rxrpc's API such that: (1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an rxrpc_peer record for a remote address and a corresponding function, rxrpc_kernel_put_peer(), is provided to dispose of it again. (2) When setting up a call, the rxrpc_peer object used during a call is now passed in rather than being set up by rxrpc_connect_call(). For afs, this meenat passing it to rxrpc_kernel_begin_call() rather than the full address (the service ID then has to be passed in as a separate parameter). (3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can get a pointer to the transport address for display purposed, and another, rxrpc_kernel_remote_srx(), to gain a pointer to the full rxrpc address. (4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(), is then altered to take a peer. This now returns the RTT or -1 if there are insufficient samples. (5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer(). (6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a peer the caller already has. This allows the afs filesystem to pin the rxrpc_peer records that it is using, allowing faster lookups and pointer comparisons rather than comparing sockaddr_rxrpc contents. It also makes it easier to get hold of the RTT. The following changes are made to afs: (1) The addr_list struct's addrs[] elements now hold a peer struct pointer and a service ID rather than a sockaddr_rxrpc. (2) When displaying the transport address, rxrpc_kernel_remote_addr() is used. (3) The port arg is removed from afs_alloc_addrlist() since it's always overridden. (4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may now return an error that must be handled. (5) afs_find_server() now takes a peer pointer to specify the address. (6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{} now do peer pointer comparison rather than address comparison. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-10-19 12:55:11 +01:00
rxrpc: Fix the excessive initial retransmission timeout rxrpc currently uses a fixed 4s retransmission timeout until the RTT is sufficiently sampled. This can cause problems with some fileservers with calls to the cache manager in the afs filesystem being dropped from the fileserver because a packet goes missing and the retransmission timeout is greater than the call expiry timeout. Fix this by: (1) Copying the RTT/RTO calculation code from Linux's TCP implementation and altering it to fit rxrpc. (2) Altering the various users of the RTT to make use of the new SRTT value. (3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO value instead (which is needed in jiffies), along with a backoff. Notes: (1) rxrpc provides RTT samples by matching the serial numbers on outgoing DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets against the reference serial number in incoming REQUESTED ACK and PING-RESPONSE ACK packets. (2) Each packet that is transmitted on an rxrpc connection gets a new per-connection serial number, even for retransmissions, so an ACK can be cross-referenced to a specific trigger packet. This allows RTT information to be drawn from retransmitted DATA packets also. (3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than on an rxrpc_call because many RPC calls won't live long enough to generate more than one sample. (4) The calculated SRTT value is in units of 8ths of a microsecond rather than nanoseconds. The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers. Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com>
2020-05-11 14:54:34 +01:00
rxrpc, afs: Allow afs to pin rxrpc_peer objects Change rxrpc's API such that: (1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an rxrpc_peer record for a remote address and a corresponding function, rxrpc_kernel_put_peer(), is provided to dispose of it again. (2) When setting up a call, the rxrpc_peer object used during a call is now passed in rather than being set up by rxrpc_connect_call(). For afs, this meenat passing it to rxrpc_kernel_begin_call() rather than the full address (the service ID then has to be passed in as a separate parameter). (3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can get a pointer to the transport address for display purposed, and another, rxrpc_kernel_remote_srx(), to gain a pointer to the full rxrpc address. (4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(), is then altered to take a peer. This now returns the RTT or -1 if there are insufficient samples. (5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer(). (6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a peer the caller already has. This allows the afs filesystem to pin the rxrpc_peer records that it is using, allowing faster lookups and pointer comparisons rather than comparing sockaddr_rxrpc contents. It also makes it easier to get hold of the RTT. The following changes are made to afs: (1) The addr_list struct's addrs[] elements now hold a peer struct pointer and a service ID rather than a sockaddr_rxrpc. (2) When displaying the transport address, rxrpc_kernel_remote_addr() is used. (3) The port arg is removed from afs_alloc_addrlist() since it's always overridden. (4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may now return an error that must be handled. (5) afs_find_server() now takes a peer pointer to specify the address. (6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{} now do peer pointer comparison rather than address comparison. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-10-19 12:55:11 +01:00