linux/fs/netfs/write_issue.c

901 lines
25 KiB

netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them. Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero. This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed: CIFS: VFS: Send error in write = -28 followed by: BUG: kernel NULL pointer dereference, address: 0000000000000008 with: RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0 or: RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755) Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk cc: Paulo Alcantara <pc@manguebit.org> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <sprasad@microsoft.com> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-08-14 22:45:50 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them. Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero. This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed: CIFS: VFS: Send error in write = -28 followed by: BUG: kernel NULL pointer dereference, address: 0000000000000008 with: RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0 or: RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755) Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk cc: Paulo Alcantara <pc@manguebit.org> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <sprasad@microsoft.com> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-08-14 22:45:50 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix writeback that needs to go to both server and cache When netfslib is performing writeback (ie. ->writepages), it maintains two parallel streams of writes, one to the server and one to the cache, but it doesn't mark either stream of writes as active until it gets some data that needs to be written to that stream. This is done because some folios will only be written to the cache (e.g. copying to the cache on read is done by marking the folios and letting writeback do the actual work) and sometimes we'll only be writing to the server (e.g. if there's no cache). Now, since we don't actually dispatch uploads and cache writes in parallel, but rather flip between the streams, depending on which has the lowest so-far-issued offset, and don't wait for the subreqs to finish before flipping, we can end up in a situation where, say, we issue a write to the server and this completes before we start the write to the cache. But because we only activate a stream when we first add a subreq to it, the result collection code may run before we manage to activate the stream - resulting in the folio being cleaned and having the writeback-in-progress mark removed. At this point, the folio no longer belongs to us. This is only really a problem for folios that need to be written to both streams - and in that case, the upload to the server is started first, followed by the write to the cache - and the cache write may see a bad folio. Fix this by activating the cache stream up front if there's a cache available. If there's a cache, then all data is going to be written to it. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/1599053.1721398818@warthog.procyon.org.uk cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-19 15:20:18 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: fix reference leak Commit 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") modified netfs_alloc_request() to initialize the reference counter to 2 instead of 1. The rationale was that the requet's "work" would release the second reference after completion (via netfs_{read,write}_collection_worker()). That works most of the time if all goes well. However, it leaks this additional reference if the request is released before the I/O operation has been submitted: the error code path only decrements the reference counter once and the work item will never be queued because there will never be a completion. This has caused outages of our whole server cluster today because tasks were blocked in netfs_wait_for_outstanding_io(), leading to deadlocks in Ceph (another bug that I will address soon in another patch). This was caused by a netfs_pgpriv2_begin_copy_to_cache() call which failed in fscache_begin_write_operation(). The leaked netfs_io_request was never completed, leaving `netfs_inode.io_count` with a positive value forever. All of this is super-fragile code. Finding out which code paths will lead to an eventual completion and which do not is hard to see: - Some functions like netfs_create_write_req() allocate a request, but will never submit any I/O. - netfs_unbuffered_read_iter_locked() calls netfs_unbuffered_read() and then netfs_put_request(); however, netfs_unbuffered_read() can also fail early before submitting the I/O request, therefore another netfs_put_request() call must be added there. A rule of thumb is that functions that return a `netfs_io_request` do not submit I/O, and all of their callers must be checked. For my taste, the whole netfs code needs an overhaul to make reference counting easier to understand and less fragile & obscure. But to fix this bug here and now and produce a patch that is adequate for a stable backport, I tried a minimal approach that quickly frees the request object upon early failure. I decided against adding a second netfs_put_request() each time because that would cause code duplication which obscures the code further. Instead, I added the function netfs_put_failed_request() which frees such a failed request synchronously under the assumption that the reference count is exactly 2 (as initially set by netfs_alloc_request() and never touched), verified by a WARN_ON_ONCE(). It then deinitializes the request object (without going through the "cleanup_work" indirection) and frees the allocation (with RCU protection to protect against concurrent access by netfs_requests_seq_start()). All code paths that fail early have been changed to call netfs_put_failed_request() instead of netfs_put_request(). Additionally, I have added a netfs_put_request() call to netfs_unbuffered_read() as explained above because the netfs_put_failed_request() approach does not work there. Fixes: 20d72b00ca81 ("netfs: Fix the request's work item to not require a ref") Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-09-25 14:08:20 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence Fix netfslib such that when it's making an unbuffered or DIO write, to make sure that it sends each subrequest strictly sequentially, waiting till the previous one is 'committed' before sending the next so that we don't have pieces landing out of order and potentially leaving a hole if an error occurs (ENOSPC for example). This is done by copying in just those bits of issuing, collecting and retrying subrequests that are necessary to do one subrequest at a time. Retrying, in particular, is simpler because if the current subrequest needs retrying, the source iterator can just be copied again and the subrequest prepped and issued again without needing to be concerned about whether it needs merging with the previous or next in the sequence. Note that the issuing loop waits for a subrequest to complete right after issuing it, but this wait could be moved elsewhere allowing preparatory steps to be performed whilst the subrequest is in progress. In particular, once content encryption is available in netfslib, that could be done whilst waiting, as could cleanup of buffers that have been completed. Fixes: 153a9961b551 ("netfs: Implement unbuffered/DIO write support") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk Tested-by: Steve French <sfrench@samba.org> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-02-26 13:32:33 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs) In netfslib, a buffered writeback operation has a 'write queue' of folios that are being written, held in a linear sequence of folio_queue structs. The 'issuer' adds new folio_queues on the leading edge of the queue and populates each one progressively; the 'collector' pops them off the trailing edge and discards them and the folios they point to as they are consumed. The queue is required to always retain at least one folio_queue structure. This allows the queue to be accessed without locking and with just a bit of barriering. When a new subrequest is prepared, its ->io_iter iterator is pointed at the current end of the write queue and then the iterator is extended as more data is added to the queue until the subrequest is committed. Now, the problem is that the folio_queue at the leading edge of the write queue when a subrequest is prepared might have been entirely consumed - but not yet removed from the queue as it is the only remaining one and is preventing the queue from collapsing. So, what happens is that subreq->io_iter is pointed at the spent folio_queue, then a new folio_queue is added, and, at that point, the collector is at entirely at liberty to immediately delete the spent folio_queue. This leaves the subreq->io_iter pointing at a freed object. If the system is lucky, iterate_folioq() sees ->io_iter, sees the as-yet uncorrupted freed object and advances to the next folio_queue in the queue. In the case seen, however, the freed object gets recycled and put back onto the queue at the tail and filled to the end. This confuses iterate_folioq() and it tries to step ->next, which may be NULL - resulting in an oops. Fix this by the following means: (1) When preparing a write subrequest, make sure there's a folio_queue struct with space in it at the leading edge of the queue. A function to make space is split out of the function to append a folio so that it can be called for this purpose. (2) If the request struct iterator is pointing to a completely spent folio_queue when we make space, then advance the iterator to the newly allocated folio_queue. The subrequest's iterator will then be set from this. The oops could be triggered using the generic/346 xfstest with a filesystem on9P over TCP with cache=loose. The oops looked something like: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:_copy_from_iter+0x2db/0x530 ... Call Trace: <TASK> ... p9pdu_vwritef+0x3d8/0x5d0 p9_client_prepare_req+0xa8/0x140 p9_client_rpc+0x81/0x280 p9_client_write+0xcf/0x1c0 v9fs_issue_write+0x87/0xc0 netfs_advance_write+0xa0/0xb0 netfs_write_folio.isra.0+0x42d/0x500 netfs_writepages+0x15a/0x1f0 do_writepages+0xd1/0x220 filemap_fdatawrite_wbc+0x5c/0x80 v9fs_mmap_vm_close+0x7d/0xb0 remove_vma+0x35/0x70 vms_complete_munmap_vmas+0x11a/0x170 do_vmi_align_munmap+0x17d/0x1c0 do_vmi_munmap+0x13e/0x150 __vm_munmap+0x92/0xd0 __x64_sys_munmap+0x17/0x20 do_syscall_64+0x80/0xe0 entry_SYSCALL_64_after_hwframe+0x71/0x79 This also fixed a similar-looking issue with cifs and generic/074. Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202409180928.f20b5a08-oliver.sang@intel.com Closes: https://lore.kernel.org/oe-lkp/202409131438.3f225fbf-oliver.sang@intel.com Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kernel test robot <oliver.sang@intel.com> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-09-26 14:58:30 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs) In netfslib, a buffered writeback operation has a 'write queue' of folios that are being written, held in a linear sequence of folio_queue structs. The 'issuer' adds new folio_queues on the leading edge of the queue and populates each one progressively; the 'collector' pops them off the trailing edge and discards them and the folios they point to as they are consumed. The queue is required to always retain at least one folio_queue structure. This allows the queue to be accessed without locking and with just a bit of barriering. When a new subrequest is prepared, its ->io_iter iterator is pointed at the current end of the write queue and then the iterator is extended as more data is added to the queue until the subrequest is committed. Now, the problem is that the folio_queue at the leading edge of the write queue when a subrequest is prepared might have been entirely consumed - but not yet removed from the queue as it is the only remaining one and is preventing the queue from collapsing. So, what happens is that subreq->io_iter is pointed at the spent folio_queue, then a new folio_queue is added, and, at that point, the collector is at entirely at liberty to immediately delete the spent folio_queue. This leaves the subreq->io_iter pointing at a freed object. If the system is lucky, iterate_folioq() sees ->io_iter, sees the as-yet uncorrupted freed object and advances to the next folio_queue in the queue. In the case seen, however, the freed object gets recycled and put back onto the queue at the tail and filled to the end. This confuses iterate_folioq() and it tries to step ->next, which may be NULL - resulting in an oops. Fix this by the following means: (1) When preparing a write subrequest, make sure there's a folio_queue struct with space in it at the leading edge of the queue. A function to make space is split out of the function to append a folio so that it can be called for this purpose. (2) If the request struct iterator is pointing to a completely spent folio_queue when we make space, then advance the iterator to the newly allocated folio_queue. The subrequest's iterator will then be set from this. The oops could be triggered using the generic/346 xfstest with a filesystem on9P over TCP with cache=loose. The oops looked something like: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:_copy_from_iter+0x2db/0x530 ... Call Trace: <TASK> ... p9pdu_vwritef+0x3d8/0x5d0 p9_client_prepare_req+0xa8/0x140 p9_client_rpc+0x81/0x280 p9_client_write+0xcf/0x1c0 v9fs_issue_write+0x87/0xc0 netfs_advance_write+0xa0/0xb0 netfs_write_folio.isra.0+0x42d/0x500 netfs_writepages+0x15a/0x1f0 do_writepages+0xd1/0x220 filemap_fdatawrite_wbc+0x5c/0x80 v9fs_mmap_vm_close+0x7d/0xb0 remove_vma+0x35/0x70 vms_complete_munmap_vmas+0x11a/0x170 do_vmi_align_munmap+0x17d/0x1c0 do_vmi_munmap+0x13e/0x150 __vm_munmap+0x92/0xd0 __x64_sys_munmap+0x17/0x20 do_syscall_64+0x80/0xe0 entry_SYSCALL_64_after_hwframe+0x71/0x79 This also fixed a similar-looking issue with cifs and generic/074. Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202409180928.f20b5a08-oliver.sang@intel.com Closes: https://lore.kernel.org/oe-lkp/202409131438.3f225fbf-oliver.sang@intel.com Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: kernel test robot <oliver.sang@intel.com> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Paulo Alcantara <pc@manguebit.com> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2024-09-26 14:58:30 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acquire() function that uses an acquire barrier to read the pointer to the first member in a list (or return NULL). (3) Use list_add_tail_release() when adding a subreq to ->subrequests. (4) Use list_first_entry_or_null_acquire() when initially accessing the front of the list (when an item is removed, the pointer to the new front iterm is obtained under the same lock). Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Link: https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/20260512123404.719402-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2026-05-12 13:33:40 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Work around recursion by abandoning retry if nothing read syzkaller reported recursion with a loop of three calls (netfs_rreq_assess, netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack during an unbuffered or direct I/O read. There are a number of issues: (1) There is no limit on the number of retries. (2) A subrequest is supposed to be abandoned if it does not transfer anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all circumstances. (3) The actual root cause, which is this: if (atomic_dec_and_test(&rreq->nr_outstanding)) netfs_rreq_terminated(rreq, ...); When we do a retry, we bump the rreq->nr_outstanding counter to prevent the final cleanup phase running before we've finished dispatching the retries. The problem is if we hit 0, we have to do the cleanup phase - but we're in the cleanup phase and end up repeating the retry cycle, hence the recursion. Work around the problem by limiting the number of retries. This is based on Lizhi Xu's patch[1], and makes the following changes: (1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make the filesystem set it if it managed to read or write at least one byte of data. Clear this bit before issuing a subrequest. (2) Add a ->retry_count member to the subrequest and increment it any time we do a retry. (3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with ->retry_count. If the latter is non-zero, we're doing a retry. (4) Abandon a subrequest if retry_count is non-zero and we made no progress. (5) Use ->retry_count in both the write-side and the read-size. [?] Question: Should I set a hard limit on retry_count in both read and write? Say it hits 50, we always abandon it. The problem is that these changes only mitigate the issue. As long as it made at least one byte of progress, the recursion is still an issue. This patch mitigates the problem, but does not fix the underlying cause. I have patches that will do that, but it's an intrusive fix that's currently pending for the next merge window. The oops generated by KASAN looks something like: BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000) Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI ... RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686 ... mark_usage kernel/locking/lockdep.c:4646 [inline] __lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 local_lock_acquire include/linux/local_lock_internal.h:29 [inline] ___slab_alloc+0x123/0x1880 mm/slub.c:3695 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141 radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253 idr_get_free+0x528/0xa40 lib/radix-tree.c:1506 idr_alloc_u32+0x191/0x2f0 lib/idr.c:46 idr_alloc+0xc1/0x130 lib/idr.c:87 p9_tag_alloc+0x394/0x870 net/9p/client.c:321 p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644 p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793 p9_client_read_once+0x443/0x820 net/9p/client.c:1570 p9_client_read+0x13f/0x1b0 net/9p/client.c:1534 v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74 netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline] netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 ... netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline] netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline] netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221 netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256 v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361 do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832 vfs_readv+0x4cf/0x890 fs/read_write.c:1025 do_preadv fs/read_write.c:1142 [inline] __do_sys_preadv fs/read_write.c:1192 [inline] __se_sys_preadv fs/read_write.c:1187 [inline] __x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1] Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Suggested-by: Lizhi Xu <lizhi.xu@windriver.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-13 13:50:08 +00:00
netfs: Work around recursion by abandoning retry if nothing read syzkaller reported recursion with a loop of three calls (netfs_rreq_assess, netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack during an unbuffered or direct I/O read. There are a number of issues: (1) There is no limit on the number of retries. (2) A subrequest is supposed to be abandoned if it does not transfer anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all circumstances. (3) The actual root cause, which is this: if (atomic_dec_and_test(&rreq->nr_outstanding)) netfs_rreq_terminated(rreq, ...); When we do a retry, we bump the rreq->nr_outstanding counter to prevent the final cleanup phase running before we've finished dispatching the retries. The problem is if we hit 0, we have to do the cleanup phase - but we're in the cleanup phase and end up repeating the retry cycle, hence the recursion. Work around the problem by limiting the number of retries. This is based on Lizhi Xu's patch[1], and makes the following changes: (1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make the filesystem set it if it managed to read or write at least one byte of data. Clear this bit before issuing a subrequest. (2) Add a ->retry_count member to the subrequest and increment it any time we do a retry. (3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with ->retry_count. If the latter is non-zero, we're doing a retry. (4) Abandon a subrequest if retry_count is non-zero and we made no progress. (5) Use ->retry_count in both the write-side and the read-size. [?] Question: Should I set a hard limit on retry_count in both read and write? Say it hits 50, we always abandon it. The problem is that these changes only mitigate the issue. As long as it made at least one byte of progress, the recursion is still an issue. This patch mitigates the problem, but does not fix the underlying cause. I have patches that will do that, but it's an intrusive fix that's currently pending for the next merge window. The oops generated by KASAN looks something like: BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000) Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI ... RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686 ... mark_usage kernel/locking/lockdep.c:4646 [inline] __lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 local_lock_acquire include/linux/local_lock_internal.h:29 [inline] ___slab_alloc+0x123/0x1880 mm/slub.c:3695 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141 radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253 idr_get_free+0x528/0xa40 lib/radix-tree.c:1506 idr_alloc_u32+0x191/0x2f0 lib/idr.c:46 idr_alloc+0xc1/0x130 lib/idr.c:87 p9_tag_alloc+0x394/0x870 net/9p/client.c:321 p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644 p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793 p9_client_read_once+0x443/0x820 net/9p/client.c:1570 p9_client_read+0x13f/0x1b0 net/9p/client.c:1534 v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74 netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline] netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 ... netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline] netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline] netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221 netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256 v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361 do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832 vfs_readv+0x4cf/0x890 fs/read_write.c:1025 do_preadv fs/read_write.c:1142 [inline] __do_sys_preadv fs/read_write.c:1192 [inline] __se_sys_preadv fs/read_write.c:1187 [inline] __x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1] Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Suggested-by: Lizhi Xu <lizhi.xu@windriver.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-13 13:50:08 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
cachefiles, netfs: Fix write to partial block at EOF Because it uses DIO writes, cachefiles is unable to make a write to the backing file if that write is not aligned to and sized according to the backing file's DIO block alignment. This makes it tricky to handle a write to the cache where the EOF on the network file is not correctly aligned. To get around this, netfslib attempts to tell the driver it is calling how much more data there is available beyond the EOF that it can use to pad the write (netfslib preclears the part of the folio above the EOF). However, it tries to tell the cache what the maximum length is, but doesn't calculate this correctly; and, in any case, cachefiles actually ignores the value and just skips the block. Fix this by: (1) Change the value passed to indicate the amount of extra data that can be added to the operation (now ->submit_extendable_to). This is much simpler to calculate as it's just the end of the folio minus the top of the data within the folio - rather than having to account for data spread over multiple folios. (2) Make cachefiles add some of this data if the subrequest it is given ends at the network file's i_size if the extra data is sufficient to pad out to a whole block. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-12 12:44:30 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
cachefiles, netfs: Fix write to partial block at EOF Because it uses DIO writes, cachefiles is unable to make a write to the backing file if that write is not aligned to and sized according to the backing file's DIO block alignment. This makes it tricky to handle a write to the cache where the EOF on the network file is not correctly aligned. To get around this, netfslib attempts to tell the driver it is calling how much more data there is available beyond the EOF that it can use to pad the write (netfslib preclears the part of the folio above the EOF). However, it tries to tell the cache what the maximum length is, but doesn't calculate this correctly; and, in any case, cachefiles actually ignores the value and just skips the block. Fix this by: (1) Change the value passed to indicate the amount of extra data that can be added to the operation (now ->submit_extendable_to). This is much simpler to calculate as it's just the end of the folio minus the top of the data within the folio - rather than having to account for data spread over multiple folios. (2) Make cachefiles add some of this data if the subrequest it is given ends at the network file's i_size if the extra data is sufficient to pad out to a whole block. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-12 12:44:30 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix missing wakeup after issuing writes After dividing up a proposed write into subrequests, netfslib sets NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to the final cleanup once it has emptied the subrequest queues. Now, whilst the collector will normally end up running at least once after this bit is set just because it takes a while to process all the write subrequests before the collector runs out of subrequests, there exists the possibility that the issuing thread will be forced to sleep and the collector thread will clean up all the subrequests before ALL_QUEUED gets set. In such a case, the collector thread will not get triggered again and will never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and causing a potential futute hang. Fix this by scheduling the write collector if all the subrequest queues are empty (and thus no writes pending issuance). Note that we'd do this ideally before queuing the subrequest, but in the case of buffered writeback, at least, we can't find out that we've run out of folios until after we've called writeback_iter() and it has returned NULL - at which point we might not actually have any subrequests still under construction. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-10-02 15:45:50 +01:00
netfs: Fix missing wakeup after issuing writes After dividing up a proposed write into subrequests, netfslib sets NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to the final cleanup once it has emptied the subrequest queues. Now, whilst the collector will normally end up running at least once after this bit is set just because it takes a while to process all the write subrequests before the collector runs out of subrequests, there exists the possibility that the issuing thread will be forced to sleep and the collector thread will clean up all the subrequests before ALL_QUEUED gets set. In such a case, the collector thread will not get triggered again and will never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and causing a potential futute hang. Fix this by scheduling the write collector if all the subrequest queues are empty (and thus no writes pending issuance). Note that we'd do this ideally before queuing the subrequest, but in the case of buffered writeback, at least, we can't find out that we've run out of folios until after we've called writeback_iter() and it has returned NULL - at which point we might not actually have any subrequests still under construction. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-10-02 15:45:50 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix missing wakeup after issuing writes After dividing up a proposed write into subrequests, netfslib sets NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to the final cleanup once it has emptied the subrequest queues. Now, whilst the collector will normally end up running at least once after this bit is set just because it takes a while to process all the write subrequests before the collector runs out of subrequests, there exists the possibility that the issuing thread will be forced to sleep and the collector thread will clean up all the subrequests before ALL_QUEUED gets set. In such a case, the collector thread will not get triggered again and will never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and causing a potential futute hang. Fix this by scheduling the write collector if all the subrequest queues are empty (and thus no writes pending issuance). Note that we'd do this ideally before queuing the subrequest, but in the case of buffered writeback, at least, we can't find out that we've run out of folios until after we've called writeback_iter() and it has returned NULL - at which point we might not actually have any subrequests still under construction. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-10-02 15:45:50 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix missing wakeup after issuing writes After dividing up a proposed write into subrequests, netfslib sets NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to the final cleanup once it has emptied the subrequest queues. Now, whilst the collector will normally end up running at least once after this bit is set just because it takes a while to process all the write subrequests before the collector runs out of subrequests, there exists the possibility that the issuing thread will be forced to sleep and the collector thread will clean up all the subrequests before ALL_QUEUED gets set. In such a case, the collector thread will not get triggered again and will never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and causing a potential futute hang. Fix this by scheduling the write collector if all the subrequest queues are empty (and thus no writes pending issuance). Note that we'd do this ideally before queuing the subrequest, but in the case of buffered writeback, at least, we can't find out that we've run out of folios until after we've called writeback_iter() and it has returned NULL - at which point we might not actually have any subrequests still under construction. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-10-02 15:45:50 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 10:07:03 +01:00