linux/fs/smb/client/sess.c

1039 lines
28 KiB

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: client: allow changing multichannel mount options on remount Previously, the client did not update a session's channel state when multichannel or max_channels mount options were changed via remount. This led to inconsistent behavior and prevented enabling or disabling multichannel support without a full unmount/remount cycle. Enable dynamic reconfiguration of multichannel and max_channels during remount by: - Introducing smb3_sync_ses_chan_max(), a centralized function for channel updates which synchronizes the session's channels with the updated configuration. - Replacing cifs_disable_secondary_channels() with cifs_decrease_secondary_channels(), which accepts a disable_mchan flag to support multichannel disable when the server stops supporting multichannel. - Updating remount logic to detect changes in multichannel or max_channels and trigger appropriate session/channel updates. Current limitation: - The query_interfaces worker runs even when max_channels=1 so that multichannel can be enabled later via remount without requiring an unmount. This is a temporary approach and may be refined in the future. Users can safely modify multichannel and max_channels on an existing mount. The client will correctly adjust the session's channel state to match the new configuration, preserving durability where possible and avoiding unnecessary disconnects. Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-12-05 20:11:51 +00:00
cifs: client: allow changing multichannel mount options on remount Previously, the client did not update a session's channel state when multichannel or max_channels mount options were changed via remount. This led to inconsistent behavior and prevented enabling or disabling multichannel support without a full unmount/remount cycle. Enable dynamic reconfiguration of multichannel and max_channels during remount by: - Introducing smb3_sync_ses_chan_max(), a centralized function for channel updates which synchronizes the session's channels with the updated configuration. - Replacing cifs_disable_secondary_channels() with cifs_decrease_secondary_channels(), which accepts a disable_mchan flag to support multichannel disable when the server stops supporting multichannel. - Updating remount logic to detect changes in multichannel or max_channels and trigger appropriate session/channel updates. Current limitation: - The query_interfaces worker runs even when max_channels=1 so that multichannel can be enabled later via remount without requiring an unmount. This is a temporary approach and may be refined in the future. Users can safely modify multichannel and max_channels on an existing mount. The client will correctly adjust the session's channel state to match the new configuration, preserving durability where possible and avoiding unnecessary disconnects. Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-12-05 20:11:51 +00:00
cifs: client: allow changing multichannel mount options on remount Previously, the client did not update a session's channel state when multichannel or max_channels mount options were changed via remount. This led to inconsistent behavior and prevented enabling or disabling multichannel support without a full unmount/remount cycle. Enable dynamic reconfiguration of multichannel and max_channels during remount by: - Introducing smb3_sync_ses_chan_max(), a centralized function for channel updates which synchronizes the session's channels with the updated configuration. - Replacing cifs_disable_secondary_channels() with cifs_decrease_secondary_channels(), which accepts a disable_mchan flag to support multichannel disable when the server stops supporting multichannel. - Updating remount logic to detect changes in multichannel or max_channels and trigger appropriate session/channel updates. Current limitation: - The query_interfaces worker runs even when max_channels=1 so that multichannel can be enabled later via remount without requiring an unmount. This is a temporary approach and may be refined in the future. Users can safely modify multichannel and max_channels on an existing mount. The client will correctly adjust the session's channel state to match the new configuration, preserving durability where possible and avoiding unnecessary disconnects. Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-12-05 20:11:51 +00:00
cifs: client: allow changing multichannel mount options on remount Previously, the client did not update a session's channel state when multichannel or max_channels mount options were changed via remount. This led to inconsistent behavior and prevented enabling or disabling multichannel support without a full unmount/remount cycle. Enable dynamic reconfiguration of multichannel and max_channels during remount by: - Introducing smb3_sync_ses_chan_max(), a centralized function for channel updates which synchronizes the session's channels with the updated configuration. - Replacing cifs_disable_secondary_channels() with cifs_decrease_secondary_channels(), which accepts a disable_mchan flag to support multichannel disable when the server stops supporting multichannel. - Updating remount logic to detect changes in multichannel or max_channels and trigger appropriate session/channel updates. Current limitation: - The query_interfaces worker runs even when max_channels=1 so that multichannel can be enabled later via remount without requiring an unmount. This is a temporary approach and may be refined in the future. Users can safely modify multichannel and max_channels on an existing mount. The client will correctly adjust the session's channel state to match the new configuration, preserving durability where possible and avoiding unnecessary disconnects. Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-12-05 20:11:51 +00:00
cifs: client: allow changing multichannel mount options on remount Previously, the client did not update a session's channel state when multichannel or max_channels mount options were changed via remount. This led to inconsistent behavior and prevented enabling or disabling multichannel support without a full unmount/remount cycle. Enable dynamic reconfiguration of multichannel and max_channels during remount by: - Introducing smb3_sync_ses_chan_max(), a centralized function for channel updates which synchronizes the session's channels with the updated configuration. - Replacing cifs_disable_secondary_channels() with cifs_decrease_secondary_channels(), which accepts a disable_mchan flag to support multichannel disable when the server stops supporting multichannel. - Updating remount logic to detect changes in multichannel or max_channels and trigger appropriate session/channel updates. Current limitation: - The query_interfaces worker runs even when max_channels=1 so that multichannel can be enabled later via remount without requiring an unmount. This is a temporary approach and may be refined in the future. Users can safely modify multichannel and max_channels on an existing mount. The client will correctly adjust the session's channel state to match the new configuration, preserving durability where possible and avoiding unnecessary disconnects. Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-12-05 20:11:51 +00:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs: try opening channels after mounting After doing mount() successfully we call cifs_try_adding_channels() which will open as many channels as it can. Channels are closed when the master session is closed. The master connection becomes the first channel. ,-------------> global cifs_tcp_ses_list <-------------------------. | | '- TCP_Server_Info <--> TCP_Server_Info <--> TCP_Server_Info <-' (master con) (chan#1 con) (chan#2 con) | ^ ^ ^ v '--------------------|--------------------' cifs_ses | - chan_count = 3 | - chans[] ---------------------' - smb3signingkey[] (master signing key) Note how channel connections don't have sessions. That's because cifs_ses can only be part of one linked list (list_head are internal to the elements). For signing keys, each channel has its own signing key which must be used only after the channel has been bound. While it's binding it must use the master session signing key. For encryption keys, since channel connections do not have sessions attached we must now find matching session by looping over all sessions in smb2_get_enc_key(). Each channel is opened like a regular server connection but at the session setup request step it must set the SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to. Finally, while sending in compound_send_recv() for requests that aren't negprot, ses-setup or binding related, use a channel by cycling through the available ones (round-robin). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2019-09-20 06:31:10 +02:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange Mark dependency on crypto modules in Kconfig. Defining per structures sdesc and cifs_secmech which are used to store crypto hash functions and contexts. They are stored per smb connection and used for all auth mechs to genereate hash values and signatures. Allocate crypto hashing functions, security descriptiors, and respective contexts when a smb/tcp connection is established. Release them when a tcp/smb connection is taken down. md5 and hmac-md5 are two crypto hashing functions that are used throught the life of an smb/tcp connection by various functions that calcualte signagure and ntlmv2 hash, HMAC etc. structure ntlmssp_auth is defined as per smb connection. ntlmssp_auth holds ciphertext which is genereated by rc4/arc4 encryption of secondary key, a nonce using ntlmv2 session key and sent in the session key field of the type 3 message sent by the client during ntlmssp negotiation/exchange A key is exchanged with the server if client indicates so in flags in type 1 messsage and server agrees in flag in type 2 message of ntlmssp negotiation. If both client and agree, a key sent by client in type 3 message of ntlmssp negotiation in the session key field. The key is a ciphertext generated off of secondary key, a nonce, using ntlmv2 hash via rc4/arc4. Signing works for ntlmssp in this patch. The sequence number within the server structure needs to be zero until session is established i.e. till type 3 packet of ntlmssp exchange of a to be very first smb session on that smb connection is sent. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-21 14:25:08 -05:00
NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange Mark dependency on crypto modules in Kconfig. Defining per structures sdesc and cifs_secmech which are used to store crypto hash functions and contexts. They are stored per smb connection and used for all auth mechs to genereate hash values and signatures. Allocate crypto hashing functions, security descriptiors, and respective contexts when a smb/tcp connection is established. Release them when a tcp/smb connection is taken down. md5 and hmac-md5 are two crypto hashing functions that are used throught the life of an smb/tcp connection by various functions that calcualte signagure and ntlmv2 hash, HMAC etc. structure ntlmssp_auth is defined as per smb connection. ntlmssp_auth holds ciphertext which is genereated by rc4/arc4 encryption of secondary key, a nonce using ntlmv2 session key and sent in the session key field of the type 3 message sent by the client during ntlmssp negotiation/exchange A key is exchanged with the server if client indicates so in flags in type 1 messsage and server agrees in flag in type 2 message of ntlmssp negotiation. If both client and agree, a key sent by client in type 3 message of ntlmssp negotiation in the session key field. The key is a ciphertext generated off of secondary key, a nonce, using ntlmv2 hash via rc4/arc4. Signing works for ntlmssp in this patch. The sequence number within the server structure needs to be zero until session is established i.e. till type 3 packet of ntlmssp exchange of a to be very first smb session on that smb connection is sent. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-10-21 14:25:08 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00
cifs NTLMv2/NTLMSSP ntlmv2 within ntlmssp autentication code Attribue Value (AV) pairs or Target Info (TI) pairs are part of ntlmv2 authentication. Structure ntlmv2_resp had only definition for two av pairs. So removed it, and now allocation of av pairs is dynamic. For servers like Windows 7/2008, av pairs sent by server in challege packet (type 2 in the ntlmssp exchange/negotiation) can vary. Server sends them during ntlmssp negotiation. So when ntlmssp is used as an authentication mechanism, type 2 challenge packet from server has this information. Pluck it and use the entire blob for authenticaiton purpose. If user has not specified, extract (netbios) domain name from the av pairs which is used to calculate ntlmv2 hash. Servers like Windows 7 are particular about the AV pair blob. Servers like Windows 2003, are not very strict about the contents of av pair blob used during ntlmv2 authentication. So when security mechanism such as ntlmv2 is used (not ntlmv2 in ntlmssp), there is no negotiation and so genereate a minimal blob that gets used in ntlmv2 authentication as well as gets sent. Fields tilen and tilbob are session specific. AV pair values are defined. To calculate ntlmv2 response we need ti/av pair blob. For sec mech like ntlmssp, the blob is plucked from type 2 response from the server. From this blob, netbios name of the domain is retrieved, if user has not already provided, to be included in the Target String as part of ntlmv2 hash calculations. For sec mech like ntlmv2, create a minimal, two av pair blob. The allocated blob is freed in case of error. In case there is no error, this blob is used in calculating ntlmv2 response (in CalcNTLMv2_response) and is also copied on the response to the server, and then freed. The type 3 ntlmssp response is prepared on a buffer, 5 * sizeof of struct _AUTHENTICATE_MESSAGE, an empirical value large enough to hold _AUTHENTICATE_MESSAGE plus a blob with max possible 10 values as part of ntlmv2 response and lmv2 keys and domain, user, workstation names etc. Also, kerberos gets selected as a default mechanism if server supports it, over the other security mechanisms. Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-09-18 22:02:18 -05:00