kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-08 18:57:22 +00:00
Code Issues Releases Packages Activity
linux/net/ethtool/rss.c

1212 lines
32 KiB
Raw Normal View History

ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
net: move misc netdev_lock flavors to a separate header Move the more esoteric helpers for netdev instance lock to a dedicated header. This avoids growing netdevice.h to infinity and makes rebuilding the kernel much faster (after touching the header with the helpers). The main netdev_lock() / netdev_unlock() functions are used in static inlines in netdevice.h and will probably be used most commonly, so keep them in netdevice.h. Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-07 10:30:06 -08:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
net: ethtool: re-order local includes Most local #include in the ethtool command handling is out of order, with either : #include "netlink.h" #include "common.h" or even : #include "netlink.h" #include "common.h" #include "bitset.h" One of the reasons is because bitset.h s lacking definitions for nlattr, netlink_ext_ack, ETH_GSTRING_LEN, and types such as u32, bool, etc. Make bitset.h standalone by including <linux/ethtool.h> for ETH_GSTRING_LEN, and <linux/netlink.h> for nlattr, netlink_ext_ack and the rest. While at it, take a pass on ethnl sources to re-order the local includes : - put them after the global includes - add a newline between global and local includes - alpha-sort the local includes One notable exception is the cmis.h include, that needs definitions from module_fw.h. Keep them in this order for now. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260319180555.1531386-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-19 19:05:54 +01:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: rss: don't report key if device doesn't support it marvell/otx2 and mvpp2 do not support setting different keys for different RSS contexts. Contexts have separate indirection tables but key is shared with all other contexts. This is likely fine, indirection table is the most important piece. Don't report the key-related parameters from such drivers. This prevents driver-errors, e.g. otx2 always writes the main key, even when user asks to change per-context key. The second reason is that without this change tracking the keys by the core gets complicated. Even if the driver correctly reject setting key with rss_context != 0, change of the main key would have to be reflected in the XArray for all additional contexts. Since the additional contexts don't have their own keys not including the attributes (in Netlink speak) seems intuitive. ethtool CLI seems to deal with it just fine. Having to set the flag in majority of the drivers is a bit tedious but not reporting the key is a safer default. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:22 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
net: ethtool: add support for symmetric-xor RSS hash Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:16 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: support skipping contexts during dump Applications may want to deal with dynamic RSS contexts only. So dumping context 0 will be counter-productive for them. Support starting the dump from a given context ID. Alternative would be to implement a dump flag to skip just context 0, not sure which is better... Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:26 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
net: ethtool: pass genl_info to the ethnl parse_request operation The .parse_request() ethnl operation extracts the relevant attributes from the netlink request to populate the private req_info. By passing genl_info as a parameter to this callback, we can use the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory parameters. This macro has the advantage of returning a better error explanation through the netlink_ext_ack struct. Convert the eeprom ethnl code to this macro, as it's the only command yet that has mandatory request parameters. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-23 10:58:32 +01:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: support skipping contexts during dump Applications may want to deal with dynamic RSS contexts only. So dumping context 0 will be counter-productive for them. Support starting the dump from a given context ID. Alternative would be to implement a dump flag to skip just context 0, not sure which is better... Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:26 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out allocating memory for response To ease the code reuse for RSS_CREATE we'll want to prepare struct rss_reply_data for the new context. Unfortunately we can't depend on the exiting scaffolding because the context doesn't exist (ctx=NULL) when we start preparing. Factor out the portion of the context 0 handling responsible for allocation of request memory, so that we can call it directly. Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:38 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out allocating memory for response To ease the code reuse for RSS_CREATE we'll want to prepare struct rss_reply_data for the new context. Unfortunately we can't depend on the exiting scaffolding because the context doesn't exist (ctx=NULL) when we start preparing. Factor out the portion of the context 0 handling responsible for allocation of request memory, so that we can call it directly. Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:38 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out allocating memory for response To ease the code reuse for RSS_CREATE we'll want to prepare struct rss_reply_data for the new context. Unfortunately we can't depend on the exiting scaffolding because the context doesn't exist (ctx=NULL) when we start preparing. Factor out the portion of the context 0 handling responsible for allocation of request memory, so that we can call it directly. Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:38 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: fix hkey leak when indir_size is 0 rss_get_data_alloc() allocates a single buffer that backs both the indirection table and the hash key, but only assigned data->indir_table when indir_size was nonzero. The expectation was that no driver implements RSS without supporting indirection table but apparently enic does just that (it's the only such in-tree driver). enic has get_rxfh_key_size but no get_rxfh_indir_size. data->indir_table stays as NULL, hkey gets set but rss_get_data_free() kfree(data->indir_table) is a nop and the allocation leaks. Always store the allocation base in data->indir_table so the free path is unambiguous. No caller treats indir_table as a sentinel; everything keys off indir_size. Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Link: https://patch.msgid.link/20260522230647.1705600-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:46 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out allocating memory for response To ease the code reuse for RSS_CREATE we'll want to prepare struct rss_reply_data for the new context. Unfortunately we can't depend on the exiting scaffolding because the context doesn't exist (ctx=NULL) when we start preparing. Factor out the portion of the context 0 handling responsible for allocation of request memory, so that we can call it directly. Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:38 -07:00
net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:14 -07:00
net: ethtool: get rid of get/set_rxfh_context functions Add the RSS context parameters to struct ethtool_rxfh_param and use the get/set_rxfh to handle the RSS contexts as well. This is part 2/2 of the fix suggested in [1]: - Add a rss_context member to the argument struct and a capability like cap_link_lanes_supported to indicate whether driver supports rss contexts, then you can remove *et_rxfh_context functions, and instead call *et_rxfh() with a non-zero rss_context. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] CC: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Tony Nguyen <anthony.l.nguyen@intel.com> CC: Marcin Wojtas <mw@semihalf.com> CC: Russell King <linux@armlinux.org.uk> CC: Sunil Goutham <sgoutham@marvell.com> CC: Geetha sowjanya <gakula@marvell.com> CC: Subbaraya Sundeep <sbhatta@marvell.com> CC: hariprasad <hkelam@marvell.com> CC: Saeed Mahameed <saeedm@nvidia.com> CC: Leon Romanovsky <leon@kernel.org> CC: Edward Cree <ecree.xilinx@gmail.com> CC: Martin Habets <habetsm.xilinx@gmail.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-3-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:15 -07:00
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. Fixes: 4f038a6a02d2 ("net: ethtool: Don't call .cleanup_data when prepare_data fails") Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:45 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. Fixes: 4f038a6a02d2 ("net: ethtool: Don't call .cleanup_data when prepare_data fails") Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:45 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool ops The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:14 -07:00
net: ethtool: add support for symmetric-xor RSS hash Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:16 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out populating response from context Similarly to previous change, factor out populating the response. We will use this after the context was allocated to send a notification so this time factor out from the additional context handling, rather than context 0 handling (for request context didn't exist, for response it does). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250717234343.2328602-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:39 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: factor out populating response from context Similarly to previous change, factor out populating the response. We will use this after the context was allocated to send a notification so this time factor out from the additional context handling, rather than context 0 handling (for request context didn't exist, for response it does). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250717234343.2328602-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:39 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: factor out populating response from context Similarly to previous change, factor out populating the response. We will use this after the context was allocated to send a notification so this time factor out from the additional context handling, rather than context 0 handling (for request context didn't exist, for response it does). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250717234343.2328602-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:39 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: report info about additional contexts from XArray IOCTL already uses the XArray when reporting info about additional contexts. Do the same thing in netlink code. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:24 -07:00
net: ethtool: move get_rxfh callback under the rss_lock We already call get_rxfh under the rss_lock when we read back context state after changes. Let's be consistent and always hold the lock. The existing callers are all under rtnl_lock so this should make no difference in practice, but it makes the locking rules far less confusing IMHO. Any RSS callback and any access to the RSS XArray should hold the lock. Link: https://patch.msgid.link/20250626202848.104457-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26 13:28:48 -07:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: move get_rxfh callback under the rss_lock We already call get_rxfh under the rss_lock when we read back context state after changes. Let's be consistent and always hold the lock. The existing callers are all under rtnl_lock so this should make no difference in practice, but it makes the locking rules far less confusing IMHO. Any RSS callback and any access to the RSS XArray should hold the lock. Link: https://patch.msgid.link/20250626202848.104457-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26 13:28:48 -07:00
ethtool: rss: move the device op invocation out of rss_prepare_data() Factor calling device ops out of rss_prepare_data(). Next patch will add alternative path using xarray. No functional changes. Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:23 -07:00
net: ethtool: remove the compat code for _rxfh_context ops All drivers are now converted to dedicated _rxfh_context ops. Remove the use of >set_rxfh() to manage additional contexts. Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250707184115.2285277-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-07 11:41:14 -07:00
net: ethtool: move get_rxfh callback under the rss_lock We already call get_rxfh under the rss_lock when we read back context state after changes. Let's be consistent and always hold the lock. The existing callers are all under rtnl_lock so this should make no difference in practice, but it makes the locking rules far less confusing IMHO. Any RSS callback and any access to the RSS XArray should hold the lock. Link: https://patch.msgid.link/20250626202848.104457-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-26 13:28:48 -07:00
ethtool: rss: move the device op invocation out of rss_prepare_data() Factor calling device ops out of rss_prepare_data(). Next patch will add alternative path using xarray. No functional changes. Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:23 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: move the device op invocation out of rss_prepare_data() Factor calling device ops out of rss_prepare_data(). Next patch will add alternative path using xarray. No functional changes. Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:23 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: echo the context number back The response to a GET request in Netlink should fully identify the queried object. RSS_GET accepts context id as an input, so it must echo that attribute back to the response. After (assuming context 1 has been created): $ ./cli.py --spec netlink/specs/ethtool.yaml \ --do rss-get \ --json '{"header": {"dev-index": 2}, "context": 1}' {'context': 1, 'header': {'dev-index': 2, 'dev-name': 'eth0'}, [...] Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-24 16:42:49 -07:00
net: ethtool: add support for symmetric-xor RSS hash Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-12 17:33:16 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: echo the context number back The response to a GET request in Netlink should fully identify the queried object. RSS_GET accepts context id as an input, so it must echo that attribute back to the response. After (assuming context 1 has been created): $ ./cli.py --spec netlink/specs/ethtool.yaml \ --do rss-get \ --json '{"header": {"dev-index": 2}, "context": 1}' {'context': 1, 'header': {'dev-index': 2, 'dev-name': 'eth0'}, [...] Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-24 16:42:49 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: don't report key if device doesn't support it marvell/otx2 and mvpp2 do not support setting different keys for different RSS contexts. Contexts have separate indirection tables but key is shared with all other contexts. This is likely fine, indirection table is the most important piece. Don't report the key-related parameters from such drivers. This prevents driver-errors, e.g. otx2 always writes the main key, even when user asks to change per-context key. The second reason is that without this change tracking the keys by the core gets complicated. Even if the driver correctly reject setting key with rss_context != 0, change of the main key would have to be reflected in the XArray for all additional contexts. Since the additional contexts don't have their own keys not including the attributes (in Netlink speak) seems intuitive. ethtool CLI seems to deal with it just fine. Having to set the flag in majority of the drivers is a bit tedious but not reporting the key is a safer default. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:22 -07:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: report which fields are configured for hashing Implement ETHTOOL_GRXFH over Netlink. The number of flow types is reasonable (around 20) so report all of them at once for simplicity. Do not maintain the flow ID mapping with ioctl at the uAPI level. This gives us a chance to clean up the confusion that come from RxNFC vs RxFH (flow direction vs hashing) in the ioctl. Try to align with the names used in ethtool CLI, they seem to have stood the test of time just fine. One annoyance is that we still call L4 ports the weird names, but I guess they also apply to IPSec (where they cover the SPI) so it is what it is. $ ynl --family ethtool --dump rss-get { "header": { "dev-index": 1, "dev-name": "enp1s0" }, "hfunc": 1, "hkey": b"...", "indir": [0, 1, ...], "flow-hash": { "ether": {"l2da"}, "ah-esp4": {"ip-src", "ip-dst"}, "ah-esp6": {"ip-src", "ip-dst"}, "ah4": {"ip-src", "ip-dst"}, "ah6": {"ip-src", "ip-dst"}, "esp4": {"ip-src", "ip-dst"}, "esp6": {"ip-src", "ip-dst"}, "ip4": {"ip-src", "ip-dst"}, "ip6": {"ip-src", "ip-dst"}, "sctp4": {"ip-src", "ip-dst"}, "sctp6": {"ip-src", "ip-dst"}, "udp4": {"ip-src", "ip-dst"}, "udp6": {"ip-src", "ip-dst"} "tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, "tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"}, }, } Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:39 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: factor out allocating memory for response To ease the code reuse for RSS_CREATE we'll want to prepare struct rss_reply_data for the new context. Unfortunately we can't depend on the exiting scaffolding because the context doesn't exist (ctx=NULL) when we start preparing. Factor out the portion of the context 0 handling responsible for allocation of request memory, so that we can call it directly. Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:38 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
ethtool: rss: support skipping contexts during dump Applications may want to deal with dynamic RSS contexts only. So dumping context 0 will be counter-productive for them. Support starting the dump from a given context ID. Alternative would be to implement a dump flag to skip just context 0, not sure which is better... Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:26 -07:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
genetlink: extend info user-storage to match NL cb ctx This allows a more uniform implementation of non-dump and dump operations, and will be used later in the series to avoid some per-operation allocation. Additionally rename the NL_ASSERT_DUMP_CTX_FITS macro, to fit a more extended usage. Suggested-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/1130cc2896626b84587a2a5f96a5c6829638f4da.1728460186.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-09 10:09:47 +02:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
ethtool: rss: support skipping contexts during dump Applications may want to deal with dynamic RSS contexts only. So dumping context 0 will be counter-productive for them. Support starting the dump from a given context ID. Alternative would be to implement a dump flag to skip just context 0, not sure which is better... Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:26 -07:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
ethtool: rss: make sure dump takes the rss lock After commit 040cef30b5e6 ("net: ethtool: move get_rxfh callback under the rss_lock") we're expected to take rss_lock around get. Switch dump to using the new prep helper and move the locking into it. Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-08 15:06:36 -07:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
ethtool: rss: support skipping contexts during dump Applications may want to deal with dynamic RSS contexts only. So dumping context 0 will be counter-productive for them. Support starting the dump from a given context ID. Alternative would be to implement a dump flag to skip just context 0, not sure which is better... Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:26 -07:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: rss: support dumping RSS contexts Now that we track RSS contexts in the core we can easily dump them. This is a major introspection improvement, as previously the only way to find all contexts would be to try all ids (of which there may be 2^32 - 1). Don't use the XArray iterators (like xa_for_each_start()) as they do not move the index past the end of the array once done, which caused multiple bugs in Netlink dumps in the past. Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-09 22:37:25 -07:00
net: ethtool: rss: add notifications In preparation for RSS_SET handling in ethnl introduce Netlink notifications for RSS. Only cover modifications, not creation and not removal of a context, because the latter may deserve a different notification type. We should cross that bridge when we add the support for context add / remove via Netlink. Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23 16:17:18 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
ethtool: rejig the RSS notification machinery for more types In anticipation for CREATE and DELETE notifications - explicitly pass the notification type to ethtool_rss_notify(), when calling from the IOCTL code. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250717234343.2328602-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:37 -07:00
net: ethtool: rss: add notifications In preparation for RSS_SET handling in ethnl introduce Netlink notifications for RSS. Only cover modifications, not creation and not removal of a context, because the latter may deserve a different notification type. We should cross that bridge when we add the support for context add / remove via Netlink. Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23 16:17:18 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
net: ethtool: rss: add notifications In preparation for RSS_SET handling in ethnl introduce Netlink notifications for RSS. Only cover modifications, not creation and not removal of a context, because the latter may deserve a different notification type. We should cross that bridge when we add the support for context add / remove via Netlink. Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-23 16:17:18 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
net: ethtool: support including Flow Label in the flow hash for RSS Some modern NICs support including the IPv6 Flow Label in the flow hash for RSS queue selection. This is outside the old "Microsoft spec", but was included in the OCP NIC spec: [ ] RSS include flow label in the hash (configurable) https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling RSS Flow Label hashing allows TCP Protective Load Balancing (PLB) to recover from receiver congestion / overload. Rx CPU/queue hotspots are relatively common for data ingest workloads, and so far we had to try to detect the condition at the RPC layer and reopen the connection. PLB lets us change the Flow Label and therefore Rx CPU on RTO, with minimal packet reordering. PLB reaction times are much faster, and can happen at any point in the connection, not just at RPC boundaries. Due to the nature of host processing (relatively long queues, other kernel subsystems masking IRQs for 100s of msecs) the risk of reordering within the host is higher than in the network. But for applications which need it - it is far preferable to potentially persistent overload of subset of queues. It is expected that the hash communicated to the host may change if the Flow Label changes. This may be surprising to some host software, but I don't expect the devices can compute two Toeplitz hashes, one with the Flow Label for queue selection and one without for the rx hash communicated to the host. Besides, changing the hash may potentially help to change the path thru host queues. User can disable NETIF_F_RXHASH if they require a stable flow hash. The name RXH_IP6_FL was chosen based on what we call Flow Label variables in IPv6 processing (fl). I prefer fl_lbl but that appears to be an fbnic-only spelling. We could spell out RXH_IP6_FLOW_LABEL but existing RXH_ defines are a lot more terse. Willem notes [1] that Flow Label is defined as identifying the flow and therefore including both the flow label _and_ the L4 header fields is not generally necessary. But it should not hurt so it's not explicitly prevented if the driver supports hashing on both at the same time. Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Joe Damato <joe@dama.to> Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-08-11 16:42:09 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting hfunc via Netlink Support setting RSS hash function / algo via ethtool Netlink. Like IOCTL we don't validate that the function is within the range known to the kernel. The drivers do a pretty good job validating the inputs, and the IDs are technically "dynamically queried" rather than part of uAPI. Only change should be that in Netlink we don't support user explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change is requested the attribute should be absent. The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing API for consistency (not that I see a strong reason for it). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:25 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting hfunc via Netlink Support setting RSS hash function / algo via ethtool Netlink. Like IOCTL we don't validate that the function is within the range known to the kernel. The drivers do a pretty good job validating the inputs, and the IDs are technically "dynamically queried" rather than part of uAPI. Only change should be that in Netlink we don't support user explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change is requested the attribute should be absent. The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing API for consistency (not that I see a strong reason for it). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:25 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: ethtool: use the new helper in rss_set_prep_indir() Refactor rss_set_prep_indir() to utilize the new ethtool_get_rx_ring_count() helper for determining the number of RX rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS. This ensures compatibility with both legacy and new ethtool_ops interfaces by transparently multiplexing between them. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-09-17 02:58:14 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: fix falsely ignoring indir table updates rss_set_prep_indir() compares the new indirection table against the current one to determine whether any update is needed. The memcmp call passes data->indir_size as the length argument, but indir_size is the number of u32 entries, not the byte count. Fixes: c0ae03588bbb ("ethtool: rss: initial RSS_SET (indirection table handling)") Link: https://patch.msgid.link/20260522230647.1705600-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:44 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting hfunc via Netlink Support setting RSS hash function / algo via ethtool Netlink. Like IOCTL we don't validate that the function is within the range known to the kernel. The drivers do a pretty good job validating the inputs, and the IDs are technically "dynamically queried" rather than part of uAPI. Only change should be that in Netlink we don't support user explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change is requested the attribute should be absent. The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing API for consistency (not that I see a strong reason for it). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:25 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is problematic. I think I did this to make it clear that the context does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful when reading the value back, and remember to treat 0xff as 0. Remove the initialization and switch to storing 0. This lets us also remove the workaround in ethnl_rss_set(). Get side does not need any adjustments and context get no longer reports: RSS input transformation: symmetric-xor: on symmetric-or-xor: on Unknown bits in RSS input transformation: 0xfc for NICs which don't support input_xfrm. Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it. As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE is 0 and struct is zalloc'd. But as this fix exemplifies storing NO_CHANGE as state is fragile. This issue is implicitly caught by running our selftests because YNL in selftests errors out on unknown bits. Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30 11:03:11 -08:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hfunc via Netlink Support setting RSS hash function / algo via ethtool Netlink. Like IOCTL we don't validate that the function is within the range known to the kernel. The drivers do a pretty good job validating the inputs, and the IDs are technically "dynamically queried" rather than part of uAPI. Only change should be that in Netlink we don't support user explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change is requested the attribute should be absent. The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing API for consistency (not that I see a strong reason for it). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:25 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
ethtool: rss: support setting hfunc via Netlink Support setting RSS hash function / algo via ethtool Netlink. Like IOCTL we don't validate that the function is within the range known to the kernel. The drivers do a pretty good job validating the inputs, and the IDs are technically "dynamically queried" rather than part of uAPI. Only change should be that in Netlink we don't support user explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change is requested the attribute should be absent. The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing API for consistency (not that I see a strong reason for it). Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:25 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
net: rss: fix reporting RXH_XFRM_NO_CHANGE as input_xfrm for contexts Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is problematic. I think I did this to make it clear that the context does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful when reading the value back, and remember to treat 0xff as 0. Remove the initialization and switch to storing 0. This lets us also remove the workaround in ethnl_rss_set(). Get side does not need any adjustments and context get no longer reports: RSS input transformation: symmetric-xor: on symmetric-or-xor: on Unknown bits in RSS input transformation: 0xfc for NICs which don't support input_xfrm. Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it. As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE is 0 and struct is zalloc'd. But as this fix exemplifies storing NO_CHANGE as state is fragile. This issue is implicitly caught by running our selftests because YNL in selftests errors out on unknown bits. Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-01-30 11:03:11 -08:00
ethtool: rss: support setting input-xfrm via Netlink Support configuring symmetric hashing via Netlink. We have the flow field config prepared as part of SET handling, so scan it for conflicts instead of querying the driver again. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:29 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting hkey via Netlink Support setting RSS hashing key via ethtool Netlink. Use the Netlink policy to make sure user doesn't pass an empty key, "resetting" the key is not a thing. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:26 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: rss: support setting flow hashing fields Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET. The tricky part is dealing with symmetric hashing. In netlink user can change the hashing fields and symmetric hash in one request, in IOCTL the two used to be set via different uAPI requests. Since fields and hash function config are still separate driver callbacks - changes to the two are not atomic. Keep things simple and validate the settings against both pre- and post- change ones. Meaning that we will reject the config request if user tries to correct the flow fields and set input_xfrm in one request, or disables input_xfrm and makes flow fields non-symmetric. We can adjust it later if there's a real need. Starting simple feels right, and potentially partially applying the settings isn't nice, either. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:30 -07:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: initial RSS_SET (indirection table handling) Add initial support for RSS_SET, for now only operations on the indirection table are supported. Unlike the ioctl don't check if at least one parameter is being changed. This is how other ethtool-nl ops behave, so pick the ethtool-nl consistency vs copying ioctl behavior. There are two special cases here: 1) resetting the table to defaults; 2) support for tables of different size. For (1) I use an empty Netlink attribute (array of size 0). (2) may require some background. AFAICT a lot of modern devices allow allocating RSS tables of different sizes. mlx5 can upsize its tables, bnxt has some "table size calculation", and Intel folks asked about RSS table sizing in context of resource allocation in the past. The ethtool IOCTL API has a concept of table size, but right now the user is expected to provide a table exactly the size the device requests. Some drivers may change the table size at runtime (in response to queue count changes) but the user is not in control of this. What's not great is that all RSS contexts share the same table size. For example a device with 128 queues enabled, 16 RSS contexts 8 queues in each will likely have 256 entry tables for each of the 16 contexts, while 32 would be more than enough given each context only has 8 queues. To address this the Netlink API should avoid enforcing table size at the uAPI level, and should allow the user to express the min table size they expect. To fully solve (2) we will need more driver plumbing but at the uAPI level this patch allows the user to specify a table size smaller than what the device advertises. The device table size must be a multiple of the user requested table size. We then replicate the user-provided table to fill the full device size table. This addresses the "allow the user to express the min table size" objective, while not enforcing any fixed size. From Netlink perspective .get_rxfh_indir_size() is now de facto the "max" table size supported by the device. We may choose to support table replication in ethtool, too, when we actually plumb this thru the device APIs. Initially I was considering moving full pattern generation to the kernel (which queues to use, at which frequency and what min sequence length). I don't think this complexity would buy us much and most if not all devices have pow-2 table sizes, which simplifies the replication a lot. Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-15 17:03:21 -07:00
ethtool: add netlink based get rss support Add netlink based support for "ethtool -x <dev> [context x]" command by implementing ETHTOOL_MSG_RSS_GET netlink message. This is equivalent to functionality provided via ETHTOOL_GRSSH in ioctl path. It sends RSS table, hash key and hash function of an interface to user space. This patch implements existing functionality available in ioctl path and enables addition of new RSS context based parameters in future. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01 16:25:55 -08:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid modifying the RSS context response Gemini says that we're modifying the RSS_CREATE response skb. I think it's right, the comment says that unicast() should unshare the skb but I'm not entirely sure what I meant there. netlink_trim() does a copy but only if skb is not well sized (it's at least 2x larger than necessary for the payload). Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:42 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid modifying the RSS context response Gemini says that we're modifying the RSS_CREATE response skb. I think it's right, the comment says that unicast() should unshare the skb but I'm not entirely sure what I meant there. netlink_trim() does a copy but only if skb is not well sized (it's at least 2x larger than necessary for the payload). Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:42 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid modifying the RSS context response Gemini says that we're modifying the RSS_CREATE response skb. I think it's right, the comment says that unicast() should unshare the skb but I'm not entirely sure what I meant there. netlink_trim() does a copy but only if skb is not well sized (it's at least 2x larger than necessary for the payload). Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:42 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid modifying the RSS context response Gemini says that we're modifying the RSS_CREATE response skb. I think it's right, the comment says that unicast() should unshare the skb but I'm not entirely sure what I meant there. netlink_trim() does a copy but only if skb is not well sized (it's at least 2x larger than necessary for the payload). Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:42 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian ETHTOOL_A_RSS_HFUNC and ETHTOOL_A_RSS_INPUT_XFRM are NLA_U32 attributes, but ethnl_rss_set() and ethnl_rss_create_doit() parse them with ethnl_update_u8(), which reads a single byte. On little endian this happens to read the least significant byte and works as long as the value fits in a byte. On big endian it reads the most significant byte, so the requested value is parsed incorrectly. The destination fields in struct ethtool_rxfh_param are u8, so the attribute can't be read directly with ethnl_update_u32(). Cap the hfunc policy at U8_MAX so an out of range value is rejected instead of being silently truncated into the u8 field, and add ethnl_update_u8_u32() to read the full u32 and narrow it into the u8 destination. Fixes: 82ae67cbc423 ("ethtool: rss: support setting hfunc via Netlink") Fixes: d3e2c7bab124 ("ethtool: rss: support setting input-xfrm via Netlink") Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20260706055017.3355806-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-07-06 08:50:17 +03:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: Track user-provided RSS indirection table size Track the number of indirection table entries the user originally provided (context 0/default as well!). Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is redundant now that user_size captures the same information. Add ethtool_rxfh_indir_lost() for drivers that must reset the indirection table. Convert bnxt and mlx5 to use it. Signed-off-by: Björn Töpel <bjorn@kernel.org> Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-03-20 09:58:21 +01:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid device context leak on reply-build failure We wait with filling the reply for new RSS context creation until after the driver ->create_rxfh_context call. The driver needs to fill some of the defaults in the context. The failure of rss_fill_reply() is somewhat theoretical, but doesn't take much effort to handle it properly. Call ->remove_rxfh_context(). If the driver's remove callback fails (some implementations like sfc can return real command errors from firmware RPCs) - skip the xa_erase and kfree, leaving the context in the xarray. This matches how ethnl_rss_delete_doit() behaves. Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:47 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid modifying the RSS context response Gemini says that we're modifying the RSS_CREATE response skb. I think it's right, the comment says that unicast() should unshare the skb but I'm not entirely sure what I meant there. netlink_trim() does a copy but only if skb is not well sized (it's at least 2x larger than necessary for the payload). Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:42 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: avoid device context leak on reply-build failure We wait with filling the reply for new RSS context creation until after the driver ->create_rxfh_context call. The driver needs to fill some of the defaults in the context. The failure of rss_fill_reply() is somewhat theoretical, but doesn't take much effort to handle it properly. Call ->remove_rxfh_context(). If the driver's remove callback fails (some implementations like sfc can return real command errors from firmware RPCs) - skip the xa_erase and kfree, leaving the context in the xarray. This matches how ethnl_rss_delete_doit() behaves. Fixes: a166ab7816c5 ("ethtool: rss: support creating contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:47 -07:00
ethtool: rss: support creating contexts via Netlink Support creating contexts via Netlink. Setting flow hashing fields on the new context is not supported at this stage, it can be added later. An empty indirection table is not supported. This is a carry over from the IOCTL interface where empty indirection table meant delete. We can repurpose empty indirection table in Netlink but for now to avoid confusion reject it using the policy. Support letting user choose the ID for the new context. This was not possible in IOCTL since the context ID field for the create action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value. Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:41 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
ethtool: rss: add missing errno on RSS context delete Remember to set ret before jumping out if someone tries to delete a context on a device which doesn't support contexts. Fixes: fbe09277fa63 ("ethtool: rss: support removing contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:43 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
ethtool: rss: add missing errno on RSS context delete Remember to set ret before jumping out if someone tries to delete a context on a device which doesn't support contexts. Fixes: fbe09277fa63 ("ethtool: rss: support removing contexts via Netlink") Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-05-22 16:06:43 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00
net: ethtool: optionally skip rtnl_lock in RSS context handlers Skip rtnl_lock in RSS context handlers if device is ops-locked. Fairly trivial conversion. bnxt needed rtnl_lock for changing the main context but looks like additional contexts are fine without it. Note (for review bots?) that ethnl_ops_begin() checks whether the device is still registered. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260605002912.3456868-10-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-06-04 17:29:09 -07:00
ethtool: rss: support removing contexts via Netlink Implement removing additional RSS contexts via Netlink. Technically it'd be possible to shoehorn the delete operation into ethnl_request_ops-compatible handler. The code ends up longer than open coded version, and I think we'll need a custom way of sending notifications at some stage (if we allow tying the context lifetime to the netlink socket, in the future). Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-17 16:43:42 -07:00