License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 15:07:57 +01:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2024-12-05 20:40:29 -08:00
|
|
|
|
2019-08-29 14:59:50 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2019-09-10 16:29:02 +01:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
2011-11-16 17:02:54 -02:00
|
|
|
|
2019-09-24 15:41:51 -03:00
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-12-11 21:24:02 -02:00
|
|
|
|
2011-11-28 08:30:20 -02:00
|
|
|
|
2014-06-30 22:28:47 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2016-04-12 15:29:27 +02:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2019-06-25 17:31:26 -03:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2019-08-30 12:52:25 -03:00
|
|
|
|
2015-12-15 09:39:39 -06:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2019-09-18 10:11:20 -03:00
|
|
|
|
2023-04-10 09:25:10 -07:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2017-04-17 11:39:06 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2019-07-04 11:32:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-04-04 10:45:27 +02:00
|
|
|
|
2026-05-20 10:20:15 +00:00
|
|
|
|
2017-04-17 15:23:08 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2017-04-18 10:46:11 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
|
|
|
|
2019-09-10 16:29:02 +01:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2019-08-22 12:50:49 +05:30
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
tools perf: Move from sane_ctype.h obtained from git to the Linux's original
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 17:27:31 -03:00
|
|
|
|
2017-04-17 16:10:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Increase the MAX_PID value to fix assertion failure problem
Current MAX_PID is only 65536, which will cause assertion failure problem
when CPU cores are more than 64 in x86_64.
This is because the pid_max value in x86_64 is at least
PIDS_PER_CPU_DEFAULT * num_possible_cpus() (see function pidmap_init
defined in kernel/pid.c), where PIDS_PER_CPU_DEFAULT is 1024 (defined in
include/linux/threads.h).
Thus for MAX_PID = 65536, the correspoinding CPU cores are
65536/1024=64. This is obviously not enough at all for x86_64, and will
cause an assertion failure problem due to BUG_ON(pid >= MAX_PID) in the
codes.
We increase MAX_PID value from 65536 to 1024*1000, which can be used in
x86_64 with 1000 cores.
This number is finally decided according to the limitation of stack size
of calling process.
Use 'ulimit -a', the result shows the stack size of any process is 8192
Kbytes, which is defined in include/uapi/linux/resource.h (#define
_STK_LIM (8*1024*1024)).
Thus we choose a large enough value for MAX_PID, and make it satisfy to
the limitation of the stack size, i.e., making the perf process take up
a memory space just smaller than 8192 Kbytes.
We have calculated and tested that 1024*1000 is OK for MAX_PID.
This means perf sched replay can now be used with at most 1000 cores in
x86_64 without any assertion failure problem.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
Before this patch:
$ perf sched replay
run measurement overhead: 240 nsecs
sleep measurement overhead: 55379 nsecs
the run test took 1000004 nsecs
the sleep test took 1059424 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 65536)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55397 nsecs
the run test took 999920 nsecs
the sleep test took 1053313 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:29 +08:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2019-12-04 10:39:25 -07:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2019-12-04 10:39:25 -07:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf tools: Fix processing of randomly serialized sched traces
Currently it's possible to meet such too high latency results
with 'perf sched latency'.
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms |
scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms |
The origin is on traces that are sometimes badly serialized across cpus.
For example the raw traces that raised such results for xfce4-panel:
(1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
The traces are processed in the order they arrive. Then in (2),
xfce4-panel sleeps, it is first waken up in (3) and eventually
scheduled in (5).
The latency reported is then 1504 - 1495 = 9 secs, as reported by perf
sched. But this is wrong, we are confident in the fact the traces are
nicely serialized while we should actually more trust the timestamps.
If we reorder by timestamps we get:
(1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
Now the trace make more sense, xfce4-panel is sleeping. Then it is
woken up in (1), scheduled in (2)
It goes to sleep in (3), woken up in (4) and scheduled in (5).
Now, latency captured between (1) and (2) is of 39 us.
And between (4) and (5) it is 2.1 ms.
Such pattern of bad serializing is the origin of the high latencies
reported by perf sched.
Basically, we need to check whether wake up time is higher than
schedule out time. If it's not the case, we need to tag the current
work atom as invalid.
Beside that, we may need to work later on a better ordering of the
traces given by the kernel.
After this patch:
xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 03:01:12 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2019-07-21 13:23:50 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
2016-04-12 15:29:31 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2023-05-26 20:43:19 -07:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-05-26 20:43:19 -07:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
|
|
|
|
|
2018-03-06 11:37:37 +08:00
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
2026-06-10 21:00:11 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2011-01-22 20:37:02 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2011-01-22 20:37:02 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-11-24 12:05:16 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-11-24 12:05:16 -02:00
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2024-09-17 14:31:00 +05:30
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2026-06-05 11:26:28 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Alloc the memory of pid_to_task dynamically to adapt to the unexpected change of pid_max
The current memory allocation of struct task_desc *pid_to_task[MAX_PID]
is in a permanent and preset way, and it has two problems:
Problem 1: If the pid_max, which is the max number of pids in the
system, is much smaller than MAX_PID (1024*1000), then it causes a waste
of stack memory. This may happen in the case where the number of cpu
cores is much smaller than 1000.
Problem 2: If the pid_max is changed from the default value to a value
larger than MAX_PID, then it will cause assertion failure problem. The
maximum value of pid_max can be set to pid_max_max (see pidmap_init
defined in kernel/pid.c), which equals to PID_MAX_LIMIT. In x86_64,
PID_MAX_LIMIT is 4*1024*1024 (defined in include/linux/threads.h). This
value is much larger than MAX_PID, and will take up 32768 Kbytes
(4*1024*1024*8/1024) for memory allocation of pid_to_task, which is much
larger than the default 8192 Kbytes of the stack size of calling
process.
Due to these two problems, we use calloc to allocate the memory of
pid_to_task dynamically.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ echo 1025000 > /proc/sys/kernel/pid_max
$ cat /proc/sys/kernel/pid_max
1025000
Run some applications until the pid of some process is greater than
the value of MAX_PID (1024*1000).
Before this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55480 nsecs
the run test took 1000008 nsecs
the sleep test took 1063151 nsecs
perf: builtin-sched.c:330: register_pid: Assertion `!(pid >= 1024000)'
failed.
Aborted
After this patch:
$ perf sched replay
run measurement overhead: 221 nsecs
sleep measurement overhead: 55435 nsecs
the run test took 1000004 nsecs
the sleep test took 1059312 nsecs
nr_run_events: 10
nr_sleep_events: 1562
nr_wakeup_events: 5
task 0 ( :1: 1), nr_events: 1
task 1 ( :2: 2), nr_events: 1
task 2 ( :3: 3), nr_events: 1
task 3 ( :5: 5), nr_events: 1
...
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:30 +08:00
|
|
|
|
2015-03-31 21:46:31 +08:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-03-31 21:46:31 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-11-24 12:05:16 -02:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-09-17 14:31:00 +05:30
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
|
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
2014-06-30 22:28:47 +02:00
|
|
|
|
|
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
Since there is sem_wait for each task in the wait_for_tasks(), e.g.
sem_wait(&task->work_done_sem).
The sem_wait can continue only when work_done_sem is greater than 0, or
it will be blocked.
For perf sched replay, one task may sem_post the work_done_sem of
another task, which causes the work_done_sem of that task processed in a
reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post...
This sequence simulates the sched process of the running tasks at the
time when perf sched record runs.
As a result, all the tasks are required and their threads must be
successfully created.
If any one (task A) of the tasks fails to create its thread, then
another task (task B), whose work_done_sem needs sem_post from that
failed task A, may likely block itself due to seg_wait.
And this is a dead halt, since task B's thread_func cannot continue at
all.
To solve this problem, perf sched replay should exit once any task fails
to create its thread.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
------------------------------------------------------------ <- dead halt
After this patch:
$ perf sched replay
...
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
$
As shown above, perf sched replay finishes the process after printing an
error message and does not block itself.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:33 +08:00
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
tools: Introduce str_error_r()
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.
But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.
So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-06 11:56:20 -03:00
|
|
|
|
perf sched replay: Handle the dead halt of sem_wait when create_tasks() fails for any task
Since there is sem_wait for each task in the wait_for_tasks(), e.g.
sem_wait(&task->work_done_sem).
The sem_wait can continue only when work_done_sem is greater than 0, or
it will be blocked.
For perf sched replay, one task may sem_post the work_done_sem of
another task, which causes the work_done_sem of that task processed in a
reasonable sequence, e.g. sem_post, sem_wait, sem_wait, sem_post...
This sequence simulates the sched process of the running tasks at the
time when perf sched record runs.
As a result, all the tasks are required and their threads must be
successfully created.
If any one (task A) of the tasks fails to create its thread, then
another task (task B), whose work_done_sem needs sem_post from that
failed task A, may likely block itself due to seg_wait.
And this is a dead halt, since task B's thread_func cannot continue at
all.
To solve this problem, perf sched replay should exit once any task fails
to create its thread.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
------------------------------------------------------------ <- dead halt
After this patch:
$ perf sched replay
...
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
$
As shown above, perf sched replay finishes the process after printing an
error message and does not block itself.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:33 +08:00
|
|
|
|
|
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-12-09 17:51:30 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
The pr_err in self_open_counters() prints error message to stderr.
Unlike stdout, stderr uses memory buffer on the stack of each calling
process.
The pr_err in self_open_counters() works in a thread called thread_func
created in function create_tasks, which concurrently creates
sched->nr_tasks threads.
If the error happens and pr_err prints the error message in each of
these threads, the stack size of the perf process (default is 8192
kbytes) will quickly run out and the segmentation fault will happen
then.
To solve this problem, pr_err with self_open_counters() should be moved
from newly created threads to the old main thread of the perf process.
Then the pr_err can work in a stable situation without the strange
segmentation fault problem.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Segmentation fault
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
...
As shown above, the result continues without any segmentation fault.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:32 +08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
perf sched replay: Fix the segmentation fault problem caused by pr_err in threads
The pr_err in self_open_counters() prints error message to stderr.
Unlike stdout, stderr uses memory buffer on the stack of each calling
process.
The pr_err in self_open_counters() works in a thread called thread_func
created in function create_tasks, which concurrently creates
sched->nr_tasks threads.
If the error happens and pr_err prints the error message in each of
these threads, the stack size of the perf process (default is 8192
kbytes) will quickly run out and the segmentation fault will happen
then.
To solve this problem, pr_err with self_open_counters() should be moved
from newly created threads to the old main thread of the perf process.
Then the pr_err can work in a stable situation without the strange
segmentation fault problem.
Example:
Test environment: x86_64 with 160 cores
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Segmentation fault
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
...
As shown above, the result continues without any segmentation fault.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:32 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2013-12-27 16:55:14 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-01-10 14:14:23 -02:00
|
|
|
|
2021-07-14 13:06:38 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Fix the EMFILE error caused by the limitation of the maximum open files
The soft maximum number of open files for a calling process is 1024,
which is defined as INR_OPEN_CUR in include/uapi/linux/fs.h, and the
hard maximum number of open files for a calling process is 4096, which
is defined as INR_OPEN_MAX in include/uapi/linux/fs.h.
Both INR_OPEN_CUR and INR_OPEN_MAX are used to limit the value of
RLIMIT_NOFILE in include/asm-generic/resource.h.
And the soft maximum number finally decides the limitation of the
maximum files which are allowed to be opened.
That is to say a process can use at most 1024 file descriptors for its
o pened files, or an EMFILE error will happen.
This error can be fixed by increasing the soft maximum number, under the
constraint that the soft maximum number can not exceed the hard maximum
number, or both soft and hard maximum number should be increased
simultaneously with privilege.
For perf sched replay, it uses sys_perf_event_open to create the file
descriptor for each of the tasks in order to handle information of perf
events.
That is to say each task needs a unique file descriptor. In x86_64,
there may be over 1024 or 4096 tasks correspoinding to the record in
perf.data, which causes that no enough file descriptors can be used.
As a result, EMFILE error happens and stops the replay process. To solve
this problem, we adaptively increase the soft and hard maximum number of
open files with a '-f' option.
Example:
Test environment: x86_64 with 160 cores
$ cat /proc/sys/kernel/pid_max
163840
$ cat /proc/sys/fs/file-max
6815744
$ ulimit -Sn
1024
$ ulimit -Hn
4096
Before this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
After this patch:
$ perf sched replay
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
Error: sys_perf_event_open() syscall returned with -1 (Too many open
files)
Have a try with -f option
$ perf sched replay -f
...
task 1549 ( :163132: 163132), nr_events: 1
task 1550 ( :163540: 163540), nr_events: 1
task 1551 ( <unknown>: 0), nr_events: 10
------------------------------------------------------------
#1 : 54.401, ravg: 54.40, cpu: 3285.21 / 3285.21
#2 : 199.548, ravg: 68.92, cpu: 4999.65 / 3456.66
#3 : 170.483, ravg: 79.07, cpu: 1349.94 / 3245.99
#4 : 192.034, ravg: 90.37, cpu: 1322.88 / 3053.67
#5 : 182.929, ravg: 99.62, cpu: 1406.51 / 2888.96
#6 : 152.974, ravg: 104.96, cpu: 1167.54 / 2716.82
#7 : 155.579, ravg: 110.02, cpu: 2992.53 / 2744.39
#8 : 130.557, ravg: 112.08, cpu: 1126.43 / 2582.59
#9 : 138.520, ravg: 114.72, cpu: 1253.22 / 2449.65
#10 : 134.328, ravg: 116.68, cpu: 1587.95 / 2363.48
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427809596-29559-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-31 21:46:34 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-09-08 15:54:48 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2015-03-31 21:46:36 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-03-31 21:46:36 +08:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2011-01-24 11:13:04 -05:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-03-31 21:46:36 +08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2011-01-22 20:37:02 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2011-01-22 20:37:02 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Fix register_pid() overflow, strcpy, and BUG_ON
register_pid() has several issues when processing untrusted perf.data:
1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap
to a small value on 32-bit systems when pid is large (e.g.
0x40000000), causing realloc to return a tiny buffer followed by
out-of-bounds writes in the initialization loop.
2. Heap buffer overflow: strcpy(task->comm, comm) copies the
untrusted comm string into a fixed 20-byte COMM_LEN buffer with
no length check.
3. BUG_ON on allocation failure: perf.data is untrusted input, so
allocation failures should be handled gracefully rather than
killing the process.
4. Realloc of sched->tasks assigned directly back, leaking the old
pointer on failure; nr_tasks incremented before the realloc,
leaving corrupted state on failure.
Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum
on 64-bit), replace strcpy with strlcpy, guard against NULL comm,
replace BUG_ON with NULL returns using safe realloc patterns, and
add NULL checks in callers that dereference the result.
Fixes: ec156764d424 ("perf sched: Import schedbench.c")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-06-04 18:25:57 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2024-09-17 14:31:00 +05:30
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf sched: Implement the scheduling workload replay engine
Integrate the schedbench.c bits with the raw trace events
that we get from the perf machinery, and activate the
workload replayer/simulator.
Example of a captured 'make -j' workload:
$ perf sched
run measurement overhead: 90 nsecs
sleep measurement overhead: 2724743 nsecs
the run test took 1000081 nsecs
the sleep test took 2981111 nsecs
version = 0.5
...
nr_run_events: 70
nr_sleep_events: 66
nr_wakeup_events: 9
target-less wakeups: 71
multi-target wakeups: 47
run events optimized: 139
task 0 ( perf: 6607), nr_events: 2
task 1 ( perf: 6608), nr_events: 6
task 2 ( : 0), nr_events: 1
task 3 ( make: 6609), nr_events: 5
task 4 ( sh: 6610), nr_events: 4
task 5 ( make: 6611), nr_events: 6
task 6 ( sh: 6612), nr_events: 4
task 7 ( make: 6613), nr_events: 5
task 8 ( migration/11: 25), nr_events: 1
task 9 ( migration/13: 29), nr_events: 1
task 10 ( migration/15: 33), nr_events: 1
task 11 ( migration/9: 21), nr_events: 1
task 12 ( sh: 6614), nr_events: 4
task 13 ( make: 6615), nr_events: 5
task 14 ( sh: 6616), nr_events: 4
task 15 ( make: 6617), nr_events: 7
task 16 ( migration/3: 9), nr_events: 1
task 17 ( migration/5: 13), nr_events: 1
task 18 ( migration/7: 17), nr_events: 1
task 19 ( migration/1: 5), nr_events: 1
task 20 ( sh: 6618), nr_events: 4
task 21 ( make: 6619), nr_events: 5
task 22 ( sh: 6620), nr_events: 4
task 23 ( make: 6621), nr_events: 10
task 24 ( sh: 6623), nr_events: 3
task 25 ( gcc: 6624), nr_events: 4
task 26 ( gcc: 6625), nr_events: 4
task 27 ( gcc: 6626), nr_events: 5
task 28 ( collect2: 6627), nr_events: 5
task 29 ( sh: 6622), nr_events: 1
task 30 ( make: 6628), nr_events: 7
task 31 ( sh: 6630), nr_events: 4
task 32 ( gcc: 6631), nr_events: 4
task 33 ( sh: 6629), nr_events: 1
task 34 ( gcc: 6632), nr_events: 4
task 35 ( gcc: 6633), nr_events: 4
task 36 ( collect2: 6634), nr_events: 4
task 37 ( make: 6635), nr_events: 8
task 38 ( sh: 6637), nr_events: 4
task 39 ( sh: 6636), nr_events: 1
task 40 ( gcc: 6638), nr_events: 4
task 41 ( gcc: 6639), nr_events: 4
task 42 ( gcc: 6640), nr_events: 4
task 43 ( collect2: 6641), nr_events: 4
task 44 ( make: 6642), nr_events: 6
task 45 ( sh: 6643), nr_events: 5
task 46 ( sh: 6644), nr_events: 3
task 47 ( sh: 6645), nr_events: 4
task 48 ( make: 6646), nr_events: 6
task 49 ( sh: 6647), nr_events: 3
task 50 ( make: 6648), nr_events: 5
task 51 ( sh: 6649), nr_events: 5
task 52 ( sh: 6650), nr_events: 6
task 53 ( make: 6651), nr_events: 4
task 54 ( make: 6652), nr_events: 5
task 55 ( make: 6653), nr_events: 4
task 56 ( make: 6654), nr_events: 4
task 57 ( make: 6655), nr_events: 5
task 58 ( sh: 6656), nr_events: 4
task 59 ( gcc: 6657), nr_events: 9
task 60 ( ksoftirqd/3: 10), nr_events: 1
task 61 ( gcc: 6658), nr_events: 4
task 62 ( make: 6659), nr_events: 5
task 63 ( sh: 6660), nr_events: 3
task 64 ( gcc: 6661), nr_events: 5
task 65 ( collect2: 6662), nr_events: 4
------------------------------------------------------------
#1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00
#2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00
#3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00
#4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00
#5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00
#6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00
#7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00
#8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00
#9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00
#10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00
I.e. we successfully analyzed the trace, replayed it
via real threads and measured the replayed workload's
scheduling properties.
This is how it looked like in 'top' output:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf
7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf
7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc
7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc
7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh
7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh
7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh
7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh
7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make
There's still various kinks in it - more patches to come.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2013-08-27 11:23:03 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:40 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-11-24 12:05:16 -02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2015-03-02 22:21:35 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-11-24 12:05:16 -02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
perf tools: Fix processing of randomly serialized sched traces
Currently it's possible to meet such too high latency results
with 'perf sched latency'.
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms |
scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms |
The origin is on traces that are sometimes badly serialized across cpus.
For example the raw traces that raised such results for xfce4-panel:
(1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
The traces are processed in the order they arrive. Then in (2),
xfce4-panel sleeps, it is first waken up in (3) and eventually
scheduled in (5).
The latency reported is then 1504 - 1495 = 9 secs, as reported by perf
sched. But this is wrong, we are confident in the fact the traces are
nicely serialized while we should actually more trust the timestamps.
If we reorder by timestamps we get:
(1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
Now the trace make more sense, xfce4-panel is sleeping. Then it is
woken up in (1), scheduled in (2)
It goes to sleep in (3), woken up in (4) and scheduled in (5).
Now, latency captured between (1) and (2) is of 39 us.
And between (4) and (5) it is 2.1 ms.
Such pattern of bad serializing is the origin of the high latencies
reported by perf sched.
Basically, we need to check whether wake up time is higher than
schedule out time. If it's not the case, we need to tag the current
work atom as invalid.
Beside that, we may need to work later on a better ordering of the
traces given by the kernel.
After this patch:
xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 03:01:12 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf tools: Fix processing of randomly serialized sched traces
Currently it's possible to meet such too high latency results
with 'perf sched latency'.
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms |
scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms |
The origin is on traces that are sometimes badly serialized across cpus.
For example the raw traces that raised such results for xfce4-panel:
(1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
The traces are processed in the order they arrive. Then in (2),
xfce4-panel sleeps, it is first waken up in (3) and eventually
scheduled in (5).
The latency reported is then 1504 - 1495 = 9 secs, as reported by perf
sched. But this is wrong, we are confident in the fact the traces are
nicely serialized while we should actually more trust the timestamps.
If we reorder by timestamps we get:
(1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
Now the trace make more sense, xfce4-panel is sleeping. Then it is
woken up in (1), scheduled in (2)
It goes to sleep in (3), woken up in (4) and scheduled in (5).
Now, latency captured between (1) and (2) is of 39 us.
And between (4) and (5) it is 2.1 ms.
Such pattern of bad serializing is the origin of the high latencies
reported by perf sched.
Basically, we need to check whether wake up time is higher than
schedule out time. If it's not the case, we need to tag the current
work atom as invalid.
Beside that, we may need to work later on a better ordering of the
traces given by the kernel.
After this patch:
xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 03:01:12 +02:00
|
|
|
|
2009-09-13 00:46:19 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2009-12-09 21:40:08 +01:00
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
|
|
|
|
|
2009-12-09 21:40:08 +01:00
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 10:08:34 +02:00
|
|
|
|
|
|
|
|
|
2026-06-01 19:53:41 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 10:08:34 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-12 10:08:34 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2014-07-14 13:02:25 +03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2026-06-04 12:55:29 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2014-07-14 13:02:25 +03:00
|
|
|
|
2026-06-04 12:56:02 -03:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2026-06-04 12:56:02 -03:00
|
|
|
|
|
|
|
|
|
2026-06-01 19:53:41 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2014-07-14 13:02:25 +03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-12 23:11:32 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2014-05-13 10:38:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
2014-05-13 10:38:21 +09:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 18:15:54 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-09-13 18:15:54 +02:00
|
|
|
|
perf tools: Fix processing of randomly serialized sched traces
Currently it's possible to meet such too high latency results
with 'perf sched latency'.
-----------------------------------------------------------------------------------
Task | Runtime ms | Switches | Average delay ms | Maximum delay ms |
-----------------------------------------------------------------------------------
xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms |
scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms |
The origin is on traces that are sometimes badly serialized across cpus.
For example the raw traces that raised such results for xfce4-panel:
(1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
The traces are processed in the order they arrive. Then in (2),
xfce4-panel sleeps, it is first waken up in (3) and eventually
scheduled in (5).
The latency reported is then 1504 - 1495 = 9 secs, as reported by perf
sched. But this is wrong, we are confident in the fact the traces are
nicely serialized while we should actually more trust the timestamps.
If we reorder by timestamps we get:
(1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120]
(3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140]
(4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000]
(5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120]
Now the trace make more sense, xfce4-panel is sleeping. Then it is
woken up in (1), scheduled in (2)
It goes to sleep in (3), woken up in (4) and scheduled in (5).
Now, latency captured between (1) and (2) is of 39 us.
And between (4) and (5) it is 2.1 ms.
Such pattern of bad serializing is the origin of the high latencies
reported by perf sched.
Basically, we need to check whether wake up time is higher than
schedule out time. If it's not the case, we need to tag the current
work atom as invalid.
Beside that, we may need to work later on a better ordering of the
traces given by the kernel.
After this patch:
xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms |
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14 03:01:12 +02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2014-07-14 13:02:25 +03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-13 18:15:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-09-11 14:46:56 +02:00
|
|
|
|
2009-09-13 18:15:54 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-13 01:56:25 +02:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2009-09-14 18:30:44 +02:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
|
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
2009-09-12 08:06:14 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
2023-10-24 15:23:07 -07:00
|
|
|
|
2015-11-02 12:10:25 +01:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2023-06-08 16:28:04 -07:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-10-05 13:17:29 -07:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
2012-09-11 13:18:47 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2023-03-28 14:00:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
2026-06-10 21:00:11 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-10 21:00:11 -03:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
2026-06-10 21:00:11 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2026-06-10 21:00:11 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-08-07 11:33:42 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2016-04-12 15:29:27 +02:00
|
|
|
|
perf tools: Introduce timestamp__scnprintf_usec()
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 11:02:45 +09:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2026-06-01 19:53:41 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
2022-11-19 01:34:46 +00:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-04 13:05:10 -03:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-12 11:11:06 +09:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
2014-05-06 14:39:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
2018-03-06 11:37:36 +08:00
|
|
|
|
|
|
|
|
|
2014-05-06 14:39:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2014-05-06 14:39:01 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-14 09:35:17 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-06-14 09:35:17 +02:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
perf tools: Introduce timestamp__scnprintf_usec()
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-24 11:02:45 +09:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2018-03-06 11:37:37 +08:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2024-10-17 10:53:50 -07:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:27 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2024-06-14 09:35:17 +02:00
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
perf machine: Protect the machine->threads with a rwlock
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-06 20:43:22 -03:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
2012-09-11 13:18:47 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 14:07:00 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 14:07:00 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-12 03:59:01 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
2012-09-11 13:18:47 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-14 20:04:48 +02:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-03-23 17:09:15 +01:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2013-08-07 22:50:47 -04:00
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
2012-09-11 13:18:47 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
perf sched: Don't read all tracepoint variables in advance
Do it just at the actual consumer of these fields, that way we avoid
needless lookups:
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
98.848272 task-clock # 0.993 CPUs utilized ( +- 0.48% )
11 context-switches # 0.112 K/sec ( +- 2.83% )
0 cpu-migrations # 0.003 K/sec ( +- 50.92% )
7,604 page-faults # 0.077 M/sec ( +- 0.00% )
332,216,085 cycles # 3.361 GHz ( +- 0.14% ) [82.87%]
100,623,710 stalled-cycles-frontend # 30.29% frontend cycles idle ( +- 0.53% ) [82.95%]
58,788,692 stalled-cycles-backend # 17.70% backend cycles idle ( +- 0.59% ) [67.15%]
609,402,433 instructions # 1.83 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.76%]
131,277,138 branches # 1328.067 M/sec ( +- 0.06% ) [83.77%]
1,117,871 branch-misses # 0.85% of all branches ( +- 0.32% ) [83.51%]
0.099580430 seconds time elapsed ( +- 0.48% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-kracdpw8wqlr0xjh75uk8g11@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
perf sched: Use perf_evsel__{int,str}val
This patch also stops reading the common fields, as they were not being used except
for one ->common_pid case that was replaced by sample->tid, i.e. the info is already
in the perf_sample struct.
Also it only fills the _event structures when there is a handler.
[root@sandy ~]# perf sched record sleep 30s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 8.585 MB perf.data (~375063 samples) ]
Before:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
129.117838 task-clock # 0.994 CPUs utilized ( +- 0.28% )
14 context-switches # 0.111 K/sec ( +- 2.10% )
0 cpu-migrations # 0.002 K/sec ( +- 66.67% )
7,654 page-faults # 0.059 M/sec ( +- 0.67% )
438,121,661 cycles # 3.393 GHz ( +- 0.06% ) [83.06%]
150,808,605 stalled-cycles-frontend # 34.42% frontend cycles idle ( +- 0.14% ) [83.10%]
80,748,941 stalled-cycles-backend # 18.43% backend cycles idle ( +- 0.64% ) [66.73%]
758,605,879 instructions # 1.73 insns per cycle
# 0.20 stalled cycles per insn ( +- 0.08% ) [83.54%]
162,164,321 branches # 1255.940 M/sec ( +- 0.10% ) [83.70%]
1,609,903 branch-misses # 0.99% of all branches ( +- 0.08% ) [83.62%]
0.129949153 seconds time elapsed ( +- 0.28% )
After:
[root@sandy ~]# perf stat -r 10 perf sched lat > /dev/null
Performance counter stats for 'perf sched lat' (10 runs):
103.592215 task-clock # 0.993 CPUs utilized ( +- 0.33% )
12 context-switches # 0.114 K/sec ( +- 3.29% )
0 cpu-migrations # 0.000 K/sec
7,605 page-faults # 0.073 M/sec ( +- 0.00% )
345,796,112 cycles # 3.338 GHz ( +- 0.07% ) [82.90%]
106,876,796 stalled-cycles-frontend # 30.91% frontend cycles idle ( +- 0.38% ) [83.23%]
62,060,877 stalled-cycles-backend # 17.95% backend cycles idle ( +- 0.80% ) [67.14%]
628,246,586 instructions # 1.82 insns per cycle
# 0.17 stalled cycles per insn ( +- 0.04% ) [83.64%]
134,962,057 branches # 1302.820 M/sec ( +- 0.10% ) [83.64%]
1,233,037 branch-misses # 0.91% of all branches ( +- 0.29% ) [83.41%]
0.104333272 seconds time elapsed ( +- 0.33% )
[root@sandy ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-weu9t63zkrfrazkn0gxj48xy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 19:29:17 -03:00
|
|
|
|
2009-10-10 14:46:04 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2012-09-11 13:18:47 -03:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2012-09-11 01:15:03 +03:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2026-05-20 12:05:07 -07:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2013-11-06 10:17:38 -03:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2018-03-06 11:37:37 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
2023-03-28 14:00:57 +08:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-03-28 14:00:57 +08:00
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-06-27 13:08:42 -03:00
|
|
|
|
2017-01-23 22:07:59 +01:00
|
|
|
|
2019-02-21 10:41:30 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-10-15 16:27:32 +02:00
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
2012-06-27 13:08:42 -03:00
|
|
|
|
2021-07-19 15:31:49 -07:00
|
|
|
|
2019-08-22 12:50:49 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2009-12-11 21:24:02 -02:00
|
|
|
|
2025-07-24 09:32:49 -07:00
|
|
|
|
2014-08-12 15:40:41 +09:00
|
|
|
|
2023-03-28 14:00:57 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
perf tools: Save some loops using perf_evlist__id2evsel
Since we already ask for PERF_SAMPLE_ID and use it to quickly find the
associated evsel, add handler func + data to struct perf_evsel to avoid
using chains of if(strcmp(event_name)) and also to avoid all the linear
list searches via trace_event_find.
To demonstrate the technique convert 'perf sched' to it:
# perf sched record sleep 5m
And then:
Performance counter stats for '/tmp/oldperf sched lat':
646.929438 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,901 page-faults # 0.032 M/sec
1,290,144,450 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,606,158,439 instructions # 1.24 insns per cycle
339,088,395 branches # 524.151 M/sec
4,550,735 branch-misses # 1.34% of all branches
0.647524759 seconds time elapsed
Versus:
Performance counter stats for 'perf sched lat':
473.564691 task-clock # 0.999 CPUs utilized
9 context-switches # 0.000 M/sec
0 CPU-migrations # 0.000 M/sec
20,903 page-faults # 0.044 M/sec
944,367,984 cycles # 1.994 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
1,442,385,571 instructions # 1.53 insns per cycle
308,383,106 branches # 651.195 M/sec
4,481,784 branch-misses # 1.45% of all branches
0.474215751 seconds time elapsed
[root@emilia ~]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1kbzpl74lwi6lavpqke2u2p3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-11-28 17:57:40 -02:00
|
|
|
|
2010-05-14 13:16:55 -03:00
|
|
|
|
2015-03-03 11:58:45 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2011-08-08 23:03:34 +02:00
|
|
|
|
2015-02-14 14:50:11 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-05-14 13:16:55 -03:00
|
|
|
|
2009-12-27 21:37:02 -02:00
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
|
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:39 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:48 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-06-04 12:55:06 -03:00
|
|
|
|
|
|
|
|
|
2019-12-04 10:39:25 -07:00
|
|
|
|
|
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-16 16:39:15 -04:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-16 16:39:15 -04:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-24 10:11:13 +09:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:21 -07:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
2024-01-22 21:24:25 -05:00
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:21 -07:00
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2023-06-08 16:28:21 -07:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:11 -07:00
|
|
|
|
2016-11-24 10:11:14 +09:00
|
|
|
|
2017-02-17 17:17:38 +09:00
|
|
|
|
2017-06-27 11:22:31 -03:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2016-11-24 10:11:12 +09:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-24 10:11:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-11-04 12:14:32 -03:00
|
|
|
|
2017-02-13 16:52:15 -03:00
|
|
|
|
2016-11-24 10:11:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-02 08:25:15 -07:00
|
|
|
|
2016-11-24 10:11:12 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-04-08 14:32:02 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:05 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:05 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-06 11:33:41 -03:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2026-06-06 11:33:41 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2026-06-05 11:17:03 -03:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:05 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-05 11:12:08 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:51 +09:00
|
|
|
|
2026-06-05 11:12:08 -03:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2018-05-28 16:07:56 -03:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:21 -07:00
|
|
|
|
|
|
|
|
|
2018-05-28 16:07:56 -03:00
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:21 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:50 +09:00
|
|
|
|
2026-05-20 12:05:11 -07:00
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-04 18:18:05 -03:00
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-04 18:18:05 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
2026-06-04 18:18:05 -03:00
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2018-05-28 16:07:56 -03:00
|
|
|
|
2026-06-04 18:18:05 -03:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:52 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2016-12-08 23:47:53 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
2026-06-06 21:48:13 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:53 +09:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-12-08 23:47:53 +09:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:53 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:34 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:03 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-06-01 14:21:44 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:49 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-19 10:47:20 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2024-08-19 10:47:20 +08:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-05 19:01:35 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-04 12:55:06 -03:00
|
|
|
|
|
|
|
|
|
2020-08-17 11:09:42 -06:00
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-05 11:15:58 -03:00
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
2024-08-12 21:26:05 +08:00
|
|
|
|
2026-05-20 12:05:09 -07:00
|
|
|
|
2024-08-12 21:26:05 +08:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
2017-01-13 19:45:21 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2024-06-18 11:03:39 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2025-07-02 18:49:38 -07:00
|
|
|
|
2023-06-08 16:28:03 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-08-25 20:17:46 +02:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:28:00 -07:00
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-06-08 16:27:58 -07:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-02 08:25:15 -07:00
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-06 21:49:16 -03:00
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
2017-01-13 19:45:23 +09:00
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:05 +09:00
|
|
|
|
2020-08-17 11:09:42 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-05-28 16:07:56 -03:00
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2016-12-08 23:47:55 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2016-12-22 15:03:50 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-08-12 13:46:55 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:07 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-06-04 18:23:35 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 12:05:21 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:23 +02:00
|
|
|
|
2020-05-04 13:56:31 -03:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-04-01 14:27:23 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:51 +02:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
2017-01-23 22:07:59 +01:00
|
|
|
|
2019-02-21 10:41:30 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-24 09:32:49 -07:00
|
|
|
|
2019-07-21 13:23:52 +02:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-05 17:45:42 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2021-07-19 15:31:49 -07:00
|
|
|
|
2019-08-22 12:50:49 +05:30
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2025-07-24 09:32:49 -07:00
|
|
|
|
2019-12-04 10:39:25 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
2025-07-24 09:32:49 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2024-08-06 10:35:33 +08:00
|
|
|
|
|
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:39 -07:00
|
|
|
|
|
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
2020-11-30 09:48:07 -03:00
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched timehist: Improve error message when analyzing wrong file
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 13:39:48 -07:00
|
|
|
|
2020-11-30 09:48:07 -03:00
|
|
|
|
perf sched timehist: Improve error message when analyzing wrong file
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 13:39:48 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
perf sched timehist: Improve error message when analyzing wrong file
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29 13:39:48 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
|
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
|
|
|
|
|
2026-06-04 18:23:35 -03:00
|
|
|
|
|
|
|
|
|
2022-01-04 22:13:51 -08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:41 -07:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
|
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2025-07-02 18:49:41 -07:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
|
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-08 14:32:02 -03:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2013-08-07 22:50:44 -04:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
2013-08-07 22:50:44 -04:00
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
2024-03-28 14:30:05 +05:30
|
|
|
|
2020-09-25 19:56:34 -04:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2018-12-06 11:18:19 -08:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-17 10:18:21 -04:00
|
|
|
|
2011-01-22 20:37:02 -02:00
|
|
|
|
2016-08-08 12:23:49 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:41 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-06-04 13:05:10 -03:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:31 +02:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:50 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
|
|
|
|
|
2019-07-21 13:23:49 +02:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-07-21 13:24:30 +02:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:26 +00:00
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
2009-09-17 18:24:55 +02:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
2024-02-06 08:32:26 +00:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2015-03-02 22:28:41 -03:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:26 +00:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:26 +00:00
|
|
|
|
2025-07-02 18:49:37 -07:00
|
|
|
|
|
|
|
|
|
2024-02-06 08:32:26 +00:00
|
|
|
|
2024-02-06 08:32:25 +00:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
perf sched: Move start_work_mutex and work_done_wait_mutex initialization to perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
2024-02-06 08:32:24 +00:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
perf sched: Move start_work_mutex and work_done_wait_mutex initialization to perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
2024-02-06 08:32:24 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
perf sched: Move start_work_mutex and work_done_wait_mutex initialization to perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
2024-02-06 08:32:24 +00:00
|
|
|
|
|
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
perf sched replay: Fix -r/--repeat command line option for infinity
Currently, the -r/--repeat option accepts values from 0 and complains
for -1. The help section specifies:
-r, --repeat <n> repeat the workload replay N times (-1: infinite)
The -r -1 option raises an error because replay_repeat is defined as
an unsigned int.
In the current implementation, the workload is repeated n times when
-r <n> is used, except when n is 0.
When -r is set to 0, the workload is also repeated once. This happens
because when -r=0, the run_one_test function is not called. (Note that
mutex unlocking, which is essential for child threads spawned to emulate
the workload, happens in run_one_test.) However, mutex unlocking is
still performed in the destroy_tasks function. Thus, -r=0 results in the
workload running once coincidentally.
To clarify and maintain the existing logic for -r >= 1 (which runs the
workload the specified number of times) and to fix the issue with infinite
runs, make -r=0 perform an infinite run.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240628071821.15264-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-06-28 12:48:21 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2012-09-08 22:53:06 -03:00
|
|
|
|
2022-08-26 09:42:40 -07:00
|
|
|
|
2022-09-08 15:54:48 -07:00
|
|
|
|
perf sched: Move start_work_mutex and work_done_wait_mutex initialization to perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
2024-02-06 08:32:24 +00:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched: Move start_work_mutex and work_done_wait_mutex initialization to perf_sched__replay()
The start_work_mutex and work_done_wait_mutex are used only for the
'perf sched replay'. Put their initialization in perf_sched__replay () to
reduce unnecessary actions in other commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.197 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ]
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 65658 nsecs
the run test took 999991 nsecs
the sleep test took 1079324 nsecs
nr_run_events: 42378
nr_sleep_events: 43102
nr_wakeup_events: 31852
target-less wakeups: 17
multi-target wakeups: 712
task 0 ( swapper: 0), nr_events: 10451
task 1 ( swapper: 1), nr_events: 3
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 717 ( sched-messaging: 74483), nr_events: 152
task 718 ( sched-messaging: 74484), nr_events: 1944
task 719 ( sched-messaging: 74485), nr_events: 73
task 720 ( sched-messaging: 74486), nr_events: 163
task 721 ( sched-messaging: 74487), nr_events: 942
task 722 ( sched-messaging: 74488), nr_events: 78
task 723 ( sched-messaging: 74489), nr_events: 1090
------------------------------------------------------------
#1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70
#2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82
#3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96
#4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64
#5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11
#6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88
#7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01
#8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40
#9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15
#10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com
2024-02-06 08:32:24 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2015-10-25 00:49:27 +09:00
|
|
|
|
|
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-13 03:36:29 +02:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:15 +00:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:15 +00:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:15 +00:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:15 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:58 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-27 18:49:59 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:58 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:16 +00:00
|
|
|
|
2026-01-19 17:58:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-05-20 10:20:16 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-27 18:49:57 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Fix segmentation faults, memory leaks, and stale pointers in diff mode
The patch addresses multiple segmentation fault vectors, out-of-bounds
reads, and memory leaks in perf sched stats by adding bounds checks,
NULL checks, proper error propagation, and robust memory cleanup.
1. In get_all_cpu_stats(), added assert(!list_empty(head)) to prevent
unsafe list_first_entry() calls on empty lists, added a missing NULL
check for summary_head->cpu_data allocation, and implemented a cleanup
ladder using a temporary list to prevent memory leaks on error paths.
2. In free_schedstat(), fixed memory leaks by ensuring internal domain_data
and cpu_data pointers are freed.
3. In show_schedstat_data(), fixed a stale pointer issue where ds2 retained
its value from a previous iteration when dptr2 became NULL, and added
proper propagation of errors from get_all_cpu_stats().
4. Propagated show_schedstat_data() errors up to perf_sched__schedstat_diff()
and perf_sched__schedstat_live() to prevent output corruption on failure.
5. In show_schedstat_data(), added NULL checks for cd_map1 and cd_map2
to gracefully handle invalid or empty data files.
6. Added parallel iteration termination checks using list_is_last() in
show_schedstat_data() for both domain and CPU lists to safely terminate
at the end of each list when files contain a different number of CPUs
or domains.
7. Added CPU bounds checks (cs1->cpu >= nr1 and cs2->cpu >= nr2) in
show_schedstat_data() to prevent out-of-bounds reads from cd_map1 and
cd_map2 when comparing files from machines with different CPU counts.
8. Added NULL checks for cd_info1 and cd_info2 to prevent crashes when
a CPU has data samples but no corresponding domain info in the header.
9. Added domain bounds checks (ds1->domain >= cd_info1->nr_domains and
ds2->domain >= cd_info2->nr_domains) to prevent out-of-bounds array
accesses in the domains array.
10. Added NULL checks for dinfo1 and dinfo2 in show_schedstat_data()
to prevent crashes when a domain has no corresponding domain info.
11. Zero-initialized the perf_data array in perf_sched__schedstat_diff()
to prevent stack garbage from causing perf_data_file__fd() to attempt
to use a NULL fptr when use_stdio happened to be non-zero.
Assisted-by: Gemini:gemini-3.1-pro-preview
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-05 21:10:04 -07:00
|
|
|
|
2026-01-19 17:58:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-13 19:23:58 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-05-05 16:05:53 +09:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2021-07-13 19:23:58 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-13 19:23:58 +08:00
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
2011-01-10 10:48:47 -02:00
|
|
|
|
2010-11-13 13:35:06 +11:00
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2010-11-13 13:35:06 +11:00
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
2020-08-07 10:48:44 -06:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2021-07-13 19:23:58 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2022-08-24 07:57:33 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2009-09-13 09:44:29 +02:00
|
|
|
|
|
|
|
|
|
2017-03-27 11:47:20 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
perf tools: Replace automatic const char[] variables by statics
An automatic const char[] variable gets initialized at runtime, just
like any other automatic variable. For long strings, that uses a lot of
stack and wastes time building the string; e.g. for the "No %s
allocation events..." case one has:
444516: 48 b8 4e 6f 20 25 73 20 61 6c movabs $0x6c61207325206f4e,%rax # "No %s al"
...
444674: 48 89 45 80 mov %rax,-0x80(%rbp)
444678: 48 b8 6c 6f 63 61 74 69 6f 6e movabs $0x6e6f697461636f6c,%rax # "location"
444682: 48 89 45 88 mov %rax,-0x78(%rbp)
444686: 48 b8 20 65 76 65 6e 74 73 20 movabs $0x2073746e65766520,%rax # " events "
444690: 66 44 89 55 c4 mov %r10w,-0x3c(%rbp)
444695: 48 89 45 90 mov %rax,-0x70(%rbp)
444699: 48 b8 66 6f 75 6e 64 2e 20 20 movabs $0x20202e646e756f66,%rax
Make them all static so that the compiler just references objects in .rodata.
Committer testing:
Ok, using dwarves's codiff tool:
$ codiff --functions /tmp/perf.before ~/bin/perf
builtin-sched.c:
cmd_sched | -48
1 function changed, 48 bytes removed, diff: -48
builtin-report.c:
cmd_report | -32
1 function changed, 32 bytes removed, diff: -32
builtin-kmem.c:
cmd_kmem | -64
build_alloc_func_list | -50
2 functions changed, 114 bytes removed, diff: -114
builtin-c2c.c:
perf_c2c__report | -390
1 function changed, 390 bytes removed, diff: -390
ui/browsers/header.c:
tui__header_window | -104
1 function changed, 104 bytes removed, diff: -104
/home/acme/bin/perf:
9 functions changed, 688 bytes removed, diff: -688
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181102230624.20064-1-linux@rasmusvillemoes.dk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-03 00:06:23 +01:00
|
|
|
|
2013-10-22 10:34:15 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
2013-10-22 10:34:15 +03:00
|
|
|
|
2016-10-24 12:00:03 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-12-06 12:40:01 +09:00
|
|
|
|
2016-10-24 12:00:03 +09:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2015-05-22 09:18:40 -04:00
|
|
|
|
|
|
|
|
|
2016-10-24 12:00:03 +09:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched replay: Fix -r/--repeat command line option for infinity
Currently, the -r/--repeat option accepts values from 0 and complains
for -1. The help section specifies:
-r, --repeat <n> repeat the workload replay N times (-1: infinite)
The -r -1 option raises an error because replay_repeat is defined as
an unsigned int.
In the current implementation, the workload is repeated n times when
-r <n> is used, except when n is 0.
When -r is set to 0, the workload is also repeated once. This happens
because when -r=0, the run_one_test function is not called. (Note that
mutex unlocking, which is essential for child threads spawned to emulate
the workload, happens in run_one_test.) However, mutex unlocking is
still performed in the destroy_tasks function. Thus, -r=0 results in the
workload running once coincidentally.
To clarify and maintain the existing logic for -r >= 1 (which runs the
workload the specified number of times) and to fix the issue with infinite
runs, make -r=0 perform an infinite run.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240628071821.15264-1-vineethr@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2024-06-28 12:48:21 +05:30
|
|
|
|
2016-10-24 12:00:03 +09:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:30 +02:00
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:31 +02:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:14 +05:30
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
2024-07-07 23:57:16 +05:30
|
|
|
|
|
|
|
|
|
2016-10-24 12:00:03 +09:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:32 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-03-09 17:44:12 +00:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:30 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
2016-11-25 09:28:41 -07:00
|
|
|
|
2016-11-16 15:06:33 +09:00
|
|
|
|
2016-12-08 23:47:54 +09:00
|
|
|
|
2016-11-29 10:15:44 -07:00
|
|
|
|
|
|
|
|
|
2017-01-13 19:45:22 +09:00
|
|
|
|
2017-09-01 10:49:12 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-12-04 10:39:25 -07:00
|
|
|
|
perf sched timehist: Add --show-prio option
The --show-prio option is used to display the priority of task.
It is disabled by default, which is consistent with original behavior.
The display format is xxx (priority does not change during task running)
or xxx->yyy (priority changes during task running)
Testcase:
# perf sched record nice -n 9 true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.497 MB perf.data ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
23952.006537 [0000] perf[534] 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0.000 0.014 0.056
23952.006899 [0001] perf[534] 0.000 0.000 0.000
23952.006947 [0001] migration/1[22] 0.000 0.015 0.047
23952.007138 [0002] perf[534] 0.000 0.000 0.000
<SNIP>
# perf sched timehist --show-prio
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
23952.006537 [0000] perf[534] 120 0.000 0.000 0.000
23952.006593 [0000] migration/0[19] 0 0.000 0.014 0.056
23952.006899 [0001] perf[534] 120 0.000 0.000 0.000
<SNIP>
23952.034843 [0003] nice[535] 120->129 0.189 0.024 23.314
<SNIP>
23952.053838 [0005] rcu_preempt[16] 120 3.993 0.000 0.023
23952.053990 [0005] <idle> 120 0.023 0.023 0.152
23952.054137 [0006] <idle> 120 1.427 1.427 17.855
23952.054278 [0007] <idle> 120 0.506 0.506 1.650
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:15 +08:00
|
|
|
|
perf sched timehist: Add --prio option
The --prio option is used to only show events for the given task priority(ies).
The default is to show events for all priority tasks, which is consistent with
the previous behavior.
Testcase:
# perf sched record nice -n 9 perf bench sched messaging -l 10000
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 3.435 [sec]
[ perf record: Woken up 270 times to write data ]
[ perf record: Captured and wrote 618.688 MB perf.data (5729036 samples) ]
# perf sched timehist -h
Usage: perf sched timehist [<options>]
-C, --cpu <cpu> list of cpus to profile
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-g, --call-graph Display call chains if present (default on)
-I, --idle-hist Show idle events only
-i, --input <file> input file name
-k, --vmlinux <file> vmlinux pathname
-M, --migrations Show migration events
-n, --next Show next task
-p, --pid <pid[,pid...]>
analyze events only for given process id(s)
-s, --summary Show only syscall summary with statistics
-S, --with-summary Show all syscalls and summary with statistics
-t, --tid <tid[,tid...]>
analyze events only for given thread id(s)
-V, --cpu-visual Add CPU visual
-v, --verbose be more verbose (show symbol address, etc)
-w, --wakeups Show wakeup events
--kallsyms <file>
kallsyms pathname
--max-stack <n> Maximum number of functions to display backtrace.
--prio <prio> analyze events only for given task priority(ies)
--show-prio Show task priority
--state Show task state when sched-out
--symfs <directory>
Look for files with symbols relative to this directory
--time <str> Time span for analysis (start,stop)
# perf sched timehist --prio 140
Samples of sched_switch event do not have callchains.
Invalid prio string
# perf sched timehist --show-prio --prio 129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.765421 [0002] sched-messaging[1229618] 129 0.000 0.000 0.029
2090450.765445 [0007] sched-messaging[1229616] 129 0.000 0.062 0.043
2090450.765448 [0014] sched-messaging[1229619] 129 0.000 0.000 0.032
2090450.765478 [0013] sched-messaging[1229617] 129 0.000 0.065 0.048
2090450.765503 [0014] sched-messaging[1229622] 129 0.000 0.000 0.017
2090450.765550 [0002] sched-messaging[1229624] 129 0.000 0.000 0.021
2090450.765562 [0007] sched-messaging[1229621] 129 0.000 0.071 0.028
2090450.765570 [0005] sched-messaging[1229620] 129 0.000 0.064 0.066
2090450.765583 [0001] sched-messaging[1229625] 129 0.000 0.001 0.031
2090450.765595 [0013] sched-messaging[1229623] 129 0.000 0.060 0.028
2090450.765637 [0014] sched-messaging[1229628] 129 0.000 0.000 0.019
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
<SNIP>
# perf sched timehist --show-prio --prio 0,120-129
Samples of sched_switch event do not have callchains.
time cpu task name prio wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ -------- --------- --------- ---------
2090450.763231 [0000] perf[1229608] 120 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 120 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 120 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 120 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0 0.000 0.001 0.004
2090450.763459 [0004] perf[1229608] 120 0.000 0.000 0.000
2090450.763469 [0004] migration/4[39] 0 0.000 0.002 0.010
2090450.763496 [0005] perf[1229608] 120 0.000 0.000 0.000
2090450.763501 [0005] migration/5[45] 0 0.000 0.001 0.004
2090450.763613 [0006] perf[1229608] 120 0.000 0.000 0.000
2090450.763622 [0006] migration/6[51] 0 0.000 0.001 0.008
2090450.763652 [0007] perf[1229608] 120 0.000 0.000 0.000
2090450.763660 [0007] migration/7[57] 0 0.000 0.001 0.008
<SNIP>
2090450.765665 [0001] <idle> 120 0.031 0.031 0.081
2090450.765665 [0007] sched-messaging[1229627] 129 0.000 0.038 0.030
2090450.765667 [0000] s1-perf[8235/7168] 120 0.008 0.000 0.004
2090450.765684 [0013] <idle> 120 0.028 0.028 0.088
2090450.765685 [0001] sched-messaging[1229630] 129 0.000 0.001 0.020
2090450.765688 [0000] <idle> 120 0.004 0.004 0.020
2090450.765689 [0002] <idle> 120 0.021 0.021 0.138
2090450.765691 [0005] sched-messaging[1229626] 129 0.000 0.085 0.029
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819033016.2427235-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-08-19 11:30:16 +08:00
|
|
|
|
|
|
|
|
|
2024-10-04 22:37:56 +05:30
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
2014-03-14 23:17:54 -04:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2014-03-14 23:17:54 -04:00
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-04-05 22:18:16 -07:00
|
|
|
|
perf sched: Move curr_pid and cpu_last_switched initialization to perf_sched__{lat|map|replay}()
The curr_pid and cpu_last_switched are used only for the
'perf sched replay/latency/map'. Put their initialization in
perf_sched__{lat|map|replay () to reduce unnecessary actions in other
commands.
Simple functional testing:
# perf sched record perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.209 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ]
# perf sched lat
-------------------------------------------------------------------------------------------------------------------------------------------
Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end |
-------------------------------------------------------------------------------------------------------------------------------------------
sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s
qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s
sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s
<SNIP>
ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s
kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s
migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s
-----------------------------------------------------------------------------------------------------------------
TOTAL: | 3180.750 ms | 41368 |
---------------------------------------------------
# echo $?
0
# perf sched map
*A0 456532.510141 secs A0 => migration/0:15
*. 456532.510171 secs . => swapper:0
. *B0 456532.510261 secs B0 => migration/1:21
. *. 456532.510279 secs
<SNIP>
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs
L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs
# echo $?
0
# perf sched replay
run measurement overhead: 108 nsecs
sleep measurement overhead: 66473 nsecs
the run test took 1000002 nsecs
the sleep test took 1082686 nsecs
nr_run_events: 49334
nr_sleep_events: 50054
nr_wakeup_events: 34701
target-less wakeups: 165
multi-target wakeups: 766
task 0 ( swapper: 0), nr_events: 15419
task 1 ( swapper: 1), nr_events: 1
task 2 ( swapper: 2), nr_events: 1
<SNIP>
task 715 ( sched-messaging: 110248), nr_events: 1438
task 716 ( sched-messaging: 110249), nr_events: 512
task 717 ( sched-messaging: 110250), nr_events: 500
task 718 ( sched-messaging: 110251), nr_events: 537
task 719 ( sched-messaging: 110252), nr_events: 823
------------------------------------------------------------
#1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35
#2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56
#3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39
#4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86
#5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34
#6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39
#7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09
#8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57
#9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90
#10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07
# echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com
2024-02-06 08:32:27 +00:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2024-08-12 13:47:10 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2014-03-14 23:17:54 -04:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:36 -07:00
|
|
|
|
|
|
|
|
|
2009-12-07 12:04:49 +08:00
|
|
|
|
2010-11-16 18:45:39 +01:00
|
|
|
|
2009-12-07 12:04:49 +08:00
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2022-08-26 09:42:32 -07:00
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2022-08-08 17:24:08 +08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2009-09-16 17:40:48 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2016-04-12 15:29:29 +02:00
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
|
|
|
|
|
2024-07-07 23:57:15 +05:30
|
|
|
|
|
|
|
|
|
2016-04-12 15:29:26 +02:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2022-03-25 17:20:32 +08:00
|
|
|
|
2012-09-11 17:29:27 -03:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2016-11-16 15:06:29 +09:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2017-03-14 01:56:29 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
|
|
|
|
|
2016-11-16 15:06:31 +09:00
|
|
|
|
2021-10-18 14:48:42 +01:00
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2026-04-05 22:18:16 -07:00
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:28 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf sched stats: Add support for diff subcommand
`perf sched stats diff` subcommand will take two perf.data files as an
input and it will print the diff between the two perf.data files. The
default input to this subcommnd is perf.data.old and perf.data.
Example usage:
# perf sched stats diff sample1.data sample2.data
Description
----------------------------------------------------------------------------------------------------
DESC -> Description of the field
COUNT -> Value of the field
PCT_CHANGE -> Percent change with corresponding base value
AVG_JIFFIES -> Avg time in jiffies between two consecutive occurrence of event
----------------------------------------------------------------------------------------------------
Time elapsed (in jiffies) : 1, 1
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY>
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE PCT_CHANGE1 PCT_CHANGE2
----------------------------------------------------------------------------------------------------
yld_count : 0, 0 | 0.00% |
array_exp : 0, 0 | 0.00% |
sched_count : 0, 0 | 0.00% |
sched_goidle : 0, 0 | 0.00% | ( 0.00%, 0.00% )
ttwu_count : 0, 0 | 0.00% |
ttwu_local : 0, 0 | 0.00% | ( 0.00%, 0.00% )
rq_cpu_time : 32565, 33525 | 2.95% |
run_delay : 0, 436 | 0.00% | ( 0.00%, 1.30% )
pcount : 0, 0 | 0.00% |
----------------------------------------------------------------------------------------------------
CPU: <ALL CPUS SUMMARY> | DOMAIN: SMT
----------------------------------------------------------------------------------------------------
DESC COUNT1 COUNT2 PCT_CHANGE AVG_JIFFIES1 AVG_JIFFIES2
----------------------------------------- <Category busy> ------------------------------------------
busy_lb_count : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_balanced : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_failed : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_imbalance_load : 0, 0 | 0.00% |
busy_lb_imbalance_util : 0, 0 | 0.00% |
busy_lb_imbalance_task : 0, 0 | 0.00% |
busy_lb_imbalance_misfit : 0, 0 | 0.00% |
busy_lb_gained : 0, 0 | 0.00% |
busy_lb_hot_gained : 0, 0 | 0.00% |
busy_lb_nobusyq : 0, 0 | 0.00% | $ 0.00, 0.00 $
busy_lb_nobusyg : 0, 0 | 0.00% | $ 0.00, 0.00 $
*busy_lb_success_count : 0, 0 | 0.00% |
*busy_lb_avg_pulled : 0.00, 0.00 | 0.00% |
... and so on. Output contains the diff of aggregated data of all the
busy, idle and newidle categories for all the sched domains in the system.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anubhav Shelat <ashelat@redhat.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: David Vernet <void@manifault.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautham Shenoy <gautham.shenoy@amd.com>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-01-19 17:58:30 +00:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2026-01-19 17:58:25 +00:00
|
|
|
|
2026-01-19 17:58:29 +00:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
libsubcmd: Don't free the usage string
Currently, commands which depend on 'parse_options_subcommand()' don't
show the usage string, and instead show '(null)'
$ ./perf sched
Usage: (null)
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
'parse_options_subcommand()' is generally expected to initialise the usage
string, with information in the passed 'subcommands[]' array
This behaviour was changed in:
230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Where the generated usage string is deallocated, and usage[0] string is
reassigned as NULL.
As discussed in [1], free the allocated usage string in the main
function itself, and don't reset usage string to NULL in
parse_options_subcommand
With this change, the behaviour is restored.
$ ./perf sched
Usage: perf sched [<options>] {record|latency|map|replay|script|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
[1]: https://lore.kernel.org/linux-perf-users/htq5vhx6piet4nuq2mmhk7fs2bhfykv52dbppwxmo3s7du2odf@styd27tioc6e/
Fixes: 230a7a71f92212e7 ("libsubcmd: Fix parse-options memory leak")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904061836.55873-2-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-09-04 11:48:30 +05:30
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2025-07-02 18:49:35 -07:00
|
|
|
|
2009-09-11 12:12:54 +02:00
|
|
|
|