2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-02 10:56:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-02 10:56:46 -07:00
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-02 10:56:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf zstd: Fix compression error path in zstd_compress_stream_to_records()
The error fallback does memcpy(dst, src, src_size) intending to store
uncompressed data when compression fails, but this has three bugs:
1. dst has been advanced past the record header (and potentially
past earlier compressed records), so the copy writes to the
wrong offset in the output buffer.
2. src still points to the start of the input, not to the
remaining uncompressed data at src + input.pos. On a second
or later iteration, previously compressed data would be
duplicated.
3. No check that dst_size >= src_size — if the remaining output
space is smaller, this is an out-of-bounds write.
Replace with return -1 after resetting the ZSTD compression
context via ZSTD_initCStream(). The -1 propagates through
zstd_compress() -> record__pushfn() -> perf_mmap__push() to the
recording loop, which breaks out and terminates recording.
Add an out_child_no_flush label in __cmd_record() so the
mmap-read failure path skips the final record__mmap_read_all()
flush — retrying the same read that just failed would just fail
again, and the flush is only useful when the mmap data is intact
but the control path (auxtrace, switch_output) had an error.
Consolidate all error paths through a single 'reset' label to
ensure the compression context is always reset on failure —
including the output-buffer-full path, where a bare return
without resetting would leave stale stream state that corrupts
output if the caller retries.
Also guard against process_header() writing the event header
before the buffer-full check: add a sizeof(perf_event_header)
pre-check so the callback never writes past the output buffer.
Guard against ZSTD making no progress: if output.pos is zero
after ZSTD_compressStream(), calling process_header(record, 0)
would re-trigger header initialization, double-subtracting the
header size from dst_size and underflowing the unsigned counter.
Also fix two pre-existing issues in the same function:
- Add a dst_size guard before subtracting the record header
size: if the output buffer is nearly full, the unsigned
dst_size -= size underflows to a huge value, causing
ZSTD_compressStream to write past the buffer boundary.
- Check the ZSTD_initCStream() return value and log an error
if the context reset itself fails.
Reported-by: sashiko-bot@kernel.org # Running on a local machine
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2026-05-04 18:26:07 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2019-03-18 20:42:55 +03:00
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2023-11-02 10:56:46 -07:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
2026-05-02 19:46:21 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
|
|
|
|
|
2020-08-20 22:25:01 +01:00
|
|
|
|
2026-05-02 19:46:21 -03:00
|
|
|
|
|
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
2026-05-02 19:46:21 -03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
perf report: Implement perf.data record decompression
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-18 20:45:11 +03:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|