kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/arch/arm/include/debug/tegra.S

226 lines
6.7 KiB
Raw Normal View History

[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: fix DEBUG_LL combined with LPAE The DEBUG_LL UART address is mapped as an MMU section, hence, the virtual address must be section-aligned. Sections are 1MB without LPAE and 2MB with LPAE. Tegra's virtual address was only aligned to 1MB, and hence the mapping was set up incorrectly with LPAE enabled, thus causing a hang early during boot. Fix this by picking a different virtual address that is aligned to 2MB. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-10-28 16:56:14 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: fix DEBUG_LL combined with LPAE The DEBUG_LL UART address is mapped as an MMU section, hence, the virtual address must be section-aligned. Sections are 1MB without LPAE and 2MB with LPAE. Tegra's virtual address was only aligned to 1MB, and hence the mapping was set up incorrectly with LPAE enabled, thus causing a hang early during boot. Fix this by picking a different virtual address that is aligned to 2MB. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-10-28 16:56:14 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: make debug_ll code build for ARMv6 In a combined ARMv6/v7 kernel, we cannot use the movt/movw instructions to load an immediate, as they are not valid on ARMv6. This changes the file to use an indirect load instead, as lots of other implementations do. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-tegra@vger.kernel.org
2014-02-27 13:42:37 +01:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: don't include iomap.h from debug-macro.S In order to move Tegra's debug-macro.S to a common location for single zImage, it must not rely on any machine-specific header files such as <mach/iomap.h>. Duplicate the few physical address definitions that debug-macro.S relies upon directly into the file. To avoid tegra_io_desc[] requiring shared knowledge of the UART mapping's virtual address, use a virtual address outside the ranges in tegra_io_desc[]. Call debug_ll_io_init() to propagate the mapping beyond the early pages tables. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-19 12:27:58 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
[ARM] tegra: initial tegra support v2: Fixes from Mike Rapoport - remove unused header files (mach/dma.h and mach/nand.h) - remove tegra 1 references from Makefile.boot v2: fixes from Russell King - remove mach/io.h include from mach/iomap.h - fix whitespace in Kconfig v2: from Colin Cross - fix invalid immediate in debug-macro.S v3: - allow selection of multiple boards Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Erik Gilling <konkers@android.com>
2010-01-21 16:53:02 -08:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: don't hard-code DEBUG_LL baud rate Stop writing to the UART clock divider registers in the Tegra DEBUG_LL code. This allows the DEBUG_LL output to use whatever baud rate was set up by the bootloader. Some users are using higher rates than 115200. This removes the only usage of tegra_uart_config[3], so reduce the size allocated for that array. Finally, fix busyuart() so that it only waits for THRE and not TEMT. For some reason, TEMT doesn't get asserted (at least on Tegra30 Beaver) at 9600 baud, even though it does at 115200 baud. This sounds like a HW bug, but I haven't investigated. For reference, U-Boot's serial code has always only checked THRE, and not checked TEMT. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-11-05 14:10:53 -07:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: tegra: decouple uncompress.h and debug-macro.S Prior to this change, Tegra's debug-macro.S relied on uncompress.h having determined which UART to use, and whether it was safe to use the UART (i.e. is it not in reset, and is clocked). This determination was communicated from uncompress.h to debug-macro.S using a few bytes of Tegra's IRAM (an on-SoC RAM). This had the disadvantage that uncompress.h was a required part of the kernel boot process; booting a non-compressed kernel would not allow earlyprintk to operate. This change duplicates the UART selection and validation logic into debug-macro.S so that the reliance on uncompress.h is removed. This also helps out with single-zImage work, since there is currently no support for using any uncompress.h with single-zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-01 15:33:20 -06:00
ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL uncompress.h now saves the selected UART's physical address in Tegra's IRAM, along with a cookie to indicate validity. The first time it's run, macro addruart in debug-macro.S looks for this cookie, and if it's present, uses the UART address stored there. If not, the static value TEGRA_DEBUG_UART_BASE is used, as was previous behaviour. The static behaviour will thus be used when not booting using a zImage. This work was inspired by work by Doug Anderson <dianders@chromium.org>; see http://lkml.org/lkml/2011/9/26/284. However, this patch relies on the data passing describe above, rather than duplicating the UART selection logic in debug-macro.S; the latest selection logic is more complex due to the need to check reset/clock bits too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-06 10:43:22 +00:00
ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra DEBUG_UNCOMPRESS was previously disallowed for Tegra due to tegra.S's use of global data that was not linked into the decompressor. Solve this by declaring this symbol in tegra.S when it is being built into the decompressor. For the kernel proper, leave the declaration in mach-tegra/common.c as explained in the comment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-02 20:53:37 +01:00
ARM: tegra: don't hard-code DEBUG_LL baud rate Stop writing to the UART clock divider registers in the Tegra DEBUG_LL code. This allows the DEBUG_LL output to use whatever baud rate was set up by the bootloader. Some users are using higher rates than 115200. This removes the only usage of tegra_uart_config[3], so reduce the size allocated for that array. Finally, fix busyuart() so that it only waits for THRE and not TEMT. For some reason, TEMT doesn't get asserted (at least on Tegra30 Beaver) at 9600 baud, even though it does at 115200 baud. This sounds like a HW bug, but I haven't investigated. For reference, U-Boot's serial code has always only checked THRE, and not checked TEMT. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Paul Walmsley <pwalmsley@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-11-05 14:10:53 -07:00
ARM: 7806/1: allow DEBUG_UNCOMPRESS for Tegra DEBUG_UNCOMPRESS was previously disallowed for Tegra due to tegra.S's use of global data that was not linked into the decompressor. Solve this by declaring this symbol in tegra.S when it is being built into the decompressor. For the kernel proper, leave the declaration in mach-tegra/common.c as explained in the comment. Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-02 20:53:37 +01:00