linux/include/target/target_core_base.h

906 lines
26 KiB

target: Add support for EXTENDED_COPY copy offload emulation This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-20 15:38:55 -07:00
2011-07-19 08:55:10 +00:00
2011-07-19 08:55:10 +00:00
2011-07-19 08:55:10 +00:00
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-02 21:52:08 -07:00
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-02 17:12:10 -07:00
target: Updates from AGrover and HCH (round 3) This patch contains a squashed version of third round series cleanups, improvements ,and simplfications from Andy and Christoph ahead of the heavy lifting between round 3 -> 4 for the target core SGL conversion. This include cleanups to the main target I/O path and other miscellaneous updates. target: Replace custom sg<->buf functions with lib funcs target: Simplify sector limiting code target: get_cdb should never return NULL target: Simplify transport_memcpy_se_mem_read_contig target: Use assignment rather than increment for t_task_cdbs target: Don't pass dma_size to generic_get_mem target: Pass sg with type scatterlist in transport_map_sg_to_mem target: Move task_sg_num next to task_sg in struct se_task target: inline struct se_transport_task into struct se_cmd target: Change name & semantics of transport_get_sectors() target: Remove unused members of se_cmd target: Rename se_cmd.t_task_cdbs to t_task_list_num target: Fix some spelling target: Remove unused var from transport_generic_do_tmr target: map_sg_to_mem: return sg_count in return value target/pscsi: Use min_t for sector limits target/pscsi: Unused param for pscsi_get_bio() target: Rename get_cdb_count to allocate_tasks target: Make transport_generic_new_cmd() available for iscsi-target target: Remove fabric callback to allocate iovecs target: Fix transport_generic_new_cmd WRITE comment (hch: Use __GFP_ZERO usage for alloc_pages() usage) Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-05-02 17:12:10 -07:00
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 04:06:11 -07:00
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-02 21:52:08 -07:00
target: Add generic active I/O shutdown logic This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-11-02 21:52:08 -07:00
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 04:06:11 -07:00
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 04:06:11 -07:00
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 04:06:11 -07:00
target: Add support for COMPARE_AND_WRITE emulation This patch adds support for COMPARE_AND_WRITE emulation on a per block basis. This logic is used as an atomic test and set primative currently used by VMWare ESX VAAI for performing array side locking of individual VMFS extent ownership. This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(), and does the majority of the work within the compare_and_write_callback() to perform the verify instance user data comparision, and subsequent write instance user data I/O submission upon a successfull comparision. The synchronization is enforced by se_device->caw_sem, that is obtained before the initial READ I/O submission in sbc_compare_and_write(). The mutex is then released upon MISCOMPARE in compare_and_write_callback(), or upon WRITE instance user-data completion in compare_and_write_post(). The implementation currently assumes a single logical block (NoLB=1). v4 changes: - Explicitly clear cmd->transport_complete_callback for two failure cases in sbc_compare_and_write() in order to avoid double unlock of ->caw_sem in compare_and_write_callback() (Dan Carpenter) v3 changes: - Convert se_device->caw_mutex to ->caw_sem v2 changes: - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to sbc_compare_and_write() during setup in sbc_parse_cdb() - Use sbc_compare_and_write() for initial READ submission with DMA_FROM_DEVICE - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance user-data in compare_and_write_callback() - Drop SCF_BIDI command flag usage - Set TRANSPORT_PROCESSING + transport_state flags before write instance submission, and convert to __target_execute_cmd() - Prevent sbc_get_size() from being being called twice to generate incorrect size in sbc_parse_cdb() - Enforce se_device->caw_mutex synchronization between initial READ I/O submission, and final WRITE I/O completion. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-19 15:20:28 -07:00
2011-07-19 08:55:10 +00:00
2011-07-19 08:55:10 +00:00
[SCSI] target: add initial statistics This patch adds a target_core_mib.c statistics conversion for backend context struct se_subsystem_dev + struct se_device config_group based statistics in target_core_device.c using CONFIGFS_EATTR() based struct config_item_types from target_core_stat.c code. The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_dev, scsi_lu, and scsi_tgt_dev output from within individual: /sys/kernel/config/target/core/$HBA/DEV/ The legacy procfs output now appear as individual configfs attributes under: *) $HBA/$DEV/statistics/scsi_dev: |-- indx |-- inst |-- ports `-- role *) $HBA/$DEV/statistics/scsi_lu: |-- creation_time |-- dev |-- dev_type |-- full_stat |-- hs_num_cmds |-- indx |-- inst |-- lu_name |-- lun |-- num_cmds |-- prod |-- read_mbytes |-- resets |-- rev |-- state_bit |-- status |-- vend `-- write_mbytes *) $HBA/$DEV/statistics/scsi_tgt_dev: |-- indx |-- inst |-- non_access_lus |-- num_lus |-- resets `-- status The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_port, scsi_tgt_port and scsi_transport output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_port |-- busy_count |-- dev |-- indx |-- inst `-- role *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_tgt_port |-- dev |-- hs_in_cmds |-- in_cmds |-- indx |-- inst |-- name |-- port_index |-- read_mbytes `-- write_mbytes *) fabric/$WWN/tpgt_$TPGT/lun/lun_$LUN_ID/statistics/scsi_transport |-- dev_name |-- device |-- indx `-- inst The conversion from backend /proc/scsi_target/mib/ context output to configfs default groups+attributes include scsi_att_intr_port and scsi_auth_intr output from within individual: /sys/kernel/config/target/fabric/$WWN/tpgt_$TPGT/acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/ The legacy procfs output now appear as individual configfs attributes under: *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_att_intr_port |-- dev |-- indx |-- inst |-- port |-- port_auth_indx `-- port_ident *) acls/$INITIATOR_WWN/lun_$LUN_ID/statistics/scsi_auth_intr |-- att_count |-- creation_time |-- dev |-- dev_or_port |-- hs_num_cmds |-- indx |-- inst |-- intr_name |-- map_indx |-- num_cmds |-- port |-- read_mbytes |-- row_status `-- write_mbytes Also, this includes adding struct target_fabric_configfs_template-> tfc_wwn_fabric_stats_cit and ->tfc_tpg_nacl_stat_cit respectively for use during target_core_fabric_configfs.c:target_fabric_setup_cits() Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-14 04:06:11 -07:00