linux/fs/pipe.c

1321 lines
29 KiB

pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
fs: pipe.c null pointer dereference This patch fixes a null pointer exception in pipe_rdwr_open() which generates the stack trace: > Unable to handle kernel NULL pointer dereference at 0000000000000028 RIP: > [<ffffffff802899a5>] pipe_rdwr_open+0x35/0x70 > [<ffffffff8028125c>] __dentry_open+0x13c/0x230 > [<ffffffff8028143d>] do_filp_open+0x2d/0x40 > [<ffffffff802814aa>] do_sys_open+0x5a/0x100 > [<ffffffff8021faf3>] sysenter_do_call+0x1b/0x67 The failure mode is triggered by an attempt to open an anonymous pipe via /proc/pid/fd/* as exemplified by this script: ============================================================= while : ; do { echo y ; sleep 1 ; } | { while read ; do echo z$REPLY; done ; } & PID=$! OUT=$(ps -efl | grep 'sleep 1' | grep -v grep | { read PID REST ; echo $PID; } ) OUT="${OUT%% *}" DELAY=$((RANDOM * 1000 / 32768)) usleep $((DELAY * 1000 + RANDOM % 1000 )) echo n > /proc/$OUT/fd/1 # Trigger defect done ============================================================= Note that the failure window is quite small and I could only reliably reproduce the defect by inserting a small delay in pipe_rdwr_open(). For example: static int pipe_rdwr_open(struct inode *inode, struct file *filp) { msleep(100); mutex_lock(&inode->i_mutex); Although the defect was observed in pipe_rdwr_open(), I think it makes sense to replicate the change through all the pipe_*_open() functions. The core of the change is to verify that inode->i_pipe has not been released before attempting to manipulate it. If inode->i_pipe is no longer present, return ENOENT to indicate so. The comment about potentially using atomic_t for i_pipe->readers and i_pipe->writers has also been removed because it is no longer relevant in this context. The inode->i_mutex lock must be used so that inode->i_pipe can be dealt with correctly. Signed-off-by: Earl Chew <earl_chew@agilent.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-19 15:55:41 -07:00
flag parameters: NONBLOCK in pipe This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:40 -07:00
pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
flag parameters: NONBLOCK in pipe This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:40 -07:00
flag parameters: NONBLOCK in pipe This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:40 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00
pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-29 13:12:42 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00
flag parameters: NONBLOCK in pipe This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:40 -07:00
flag parameters: NONBLOCK in pipe This patch adds O_NONBLOCK support to pipe2. It is minimally more involved than the patches for eventfd et.al but still trivial. The interfaces of the create_write_pipe and create_read_pipe helper functions were changed and the one other caller as well. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fds[2]; if (syscall (__NR_pipe2, fds, 0) == -1) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if (fl & O_NONBLOCK) { printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1) { puts ("pipe2(O_NONBLOCK) failed"); return 1; } for (int i = 0; i < 2; ++i) { int fl = fcntl (fds[i], F_GETFL); if (fl == -1) { puts ("fcntl failed"); return 1; } if ((fl & O_NONBLOCK) == 0) { printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i); return 1; } close (fds[i]); } puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:40 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 21:29:30 -07:00