linux/drivers/mfd/Kconfig

1153 lines
35 KiB

ARM: omap: fix broken twl-core dependencies and ifdefs In commit aeb5032b3f, a dependency on IRQ_DOMAIN was added, which causes regressions on previously working setups: a previously working non-DT kernel configuration now loses its PMIC support. The lack of PMIC support in turn causes the loss of other functionality the kernel had. This dependency was added because the driver now registers its interrupts with the IRQ domain code, presumably to prevent a build error. The result is that OMAP3 oopses in the vp.c code (fixed by a previous commit) due to the lack of PMIC support. However, even with IRQ_DOMAIN enabled, the driver oopses: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP Modules linked in: CPU: 1 Not tainted (3.3.0-rc2+ #271) PC is at irq_domain_add+0x1c/0x134 LR is at twl_probe+0xd0/0x370 pc : [<c007bad0>] lr : [<c029baac>] psr: 00000113 sp : df843c48 ip : df843c68 fp : df843c64 r10: c02b93e4 r9 : 00000000 r8 : c029b9dc r7 : df9d8a00 r6 : c03bef90 r5 : 00000000 r4 : c03f5240 r3 : 00000000 r2 : c03f5240 r1 : 00000015 r0 : c03f5240 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xdf8422f0) Stack: (0xdf843c48 to 0xdf844000) 3c40: 00000014 00000170 00000014 c03bef90 df843c9c df843c68 3c60: c029baac c007bac0 00000000 df9d8a20 00000001 c03cd238 c02b93e4 df9d8a20 3c80: df9d8a04 df9d8a00 c029b9dc df8cae08 df843cc4 df843ca0 c01eee70 c029b9e8 ... Backtrace: [<c007bab4>] (irq_domain_add+0x0/0x134) from [<c029baac>] (twl_probe+0xd0/0x370) r6:c03bef90 r5:00000014 r4:00000170 [<c029b9dc>] (twl_probe+0x0/0x370) from [<c01eee70>] (i2c_device_probe+0xb0/0xe4) [<c01eedc0>] (i2c_device_probe+0x0/0xe4) from [<c01d1f34>] (really_probe+0xa0/0x178) r8:df8f0070 r7:c03cd238 r6:df9d8a20 r5:df9d8a20 r4:df9d8a20 [<c01d1e94>] (really_probe+0x0/0x178) from [<c01d205c>] (driver_probe_device+0x50/0x68) r7:df843d18 r6:df9d8a20 r5:c03cd238 r4:df9d8a20 [<c01d200c>] (driver_probe_device+0x0/0x68) from [<c01d2148>] (__device_attach+0x44/0x48) r5:df9d8a20 r4:c03cd238 [<c01d2104>] (__device_attach+0x0/0x48) from [<c01d0840>] (bus_for_each_drv+0x58/0x98) r5:c01d2104 r4:00000000 [<c01d07e8>] (bus_for_each_drv+0x0/0x98) from [<c01d21f8>] (device_attach+0x80/0xac) r7:df9d8a28 r6:df9d8a54 r5:c03cd978 r4:df9d8a20 [<c01d2178>] (device_attach+0x0/0xac) from [<c01d1430>] (bus_probe_device+0x34/0xa4) r6:df9d8a20 r5:c03cd978 r4:df9d8a20 [<c01d13fc>] (bus_probe_device+0x0/0xa4) from [<c01cffb0>] (device_add+0x2a0/0x420) r6:00000000 r5:df9d8a20 r4:df9d8a20 [<c01cfd10>] (device_add+0x0/0x420) from [<c01d0150>] (device_register+0x20/0x24) r8:df9d8a00 r7:df9d8a04 r6:df8f0048 r5:df9d8a00 r4:df9d8a20 [<c01d0130>] (device_register+0x0/0x24) from [<c01ef8d4>] (i2c_new_device+0x118/0x180) r4:df9d8a20 [<c01ef7bc>] (i2c_new_device+0x0/0x180) from [<c01efc88>] (i2c_register_adapter+0x140/0x204) r8:c03cd970 r7:00000000 r6:df8f0070 r5:df8a6300 r4:df8f0048 [<c01efb48>] (i2c_register_adapter+0x0/0x204) from [<c01efe9c>] (i2c_add_numbered_adapter+0xb4/0xcc) r8:df8a4c54 r7:df8cae00 r6:df843e2c r5:df8f0048 r4:00000000 [<c01efde8>] (i2c_add_numbered_adapter+0x0/0xcc) from [<c029ce1c>] (omap_i2c_probe+0x2f8/0x3b4) r6:00000000 r5:df8f0000 r4:df8f0070 [<c029cb24>] (omap_i2c_probe+0x0/0x3b4) from [<c01d3484>] (platform_drv_probe+0x20/0x24) [<c01d3464>] (platform_drv_probe+0x0/0x24) from [<c01d1f34>] (really_probe+0xa0/0x178) [<c01d1e94>] (really_probe+0x0/0x178) from [<c01d205c>] (driver_probe_device+0x50/0x68) r7:df843ef0 r6:c03cdb2c r5:c03cdb2c r4:df8cae08 [<c01d200c>] (driver_probe_device+0x0/0x68) from [<c01d20e0>] (__driver_attach+0x6c/0x90) r5:df8cae3c r4:df8cae08 [<c01d2074>] (__driver_attach+0x0/0x90) from [<c01d08d8>] (bus_for_each_dev+0x58/0x98) r6:c03cdb2c r5:c01d2074 r4:00000000 [<c01d0880>] (bus_for_each_dev+0x0/0x98) from [<c01d1d80>] (driver_attach+0x20/0x28) r7:df880b80 r6:c03cdb2c r5:c03cdb2c r4:c0394f28 [<c01d1d60>] (driver_attach+0x0/0x28) from [<c01d115c>] (bus_add_driver+0xb4/0x230) [<c01d10a8>] (bus_add_driver+0x0/0x230) from [<c01d278c>] (driver_register+0xc8/0x154) [<c01d26c4>] (driver_register+0x0/0x154) from [<c01d37e4>] (platform_driver_register+0x4c/0x60) r8:00000000 r7:00000013 r6:c00384c8 r5:c0395180 r4:c0394f28 [<c01d3798>] (platform_driver_register+0x0/0x60) from [<c038626c>] (omap_i2c_init_driver+0x14/0x1c) [<c0386258>] (omap_i2c_init_driver+0x0/0x1c) from [<c00087b8>] (do_one_initcall+0x9c/0x164) [<c000871c>] (do_one_initcall+0x0/0x164) from [<c036c2f4>] (kernel_init+0x90/0x138) [<c036c264>] (kernel_init+0x0/0x138) from [<c00384c8>] (do_exit+0x0/0x2ec) r5:c036c264 r4:00000000 <0>Code: e24dd004 e5903014 e1a04000 e5905010 (e5933000) <4>---[ end trace 1b75b31a2719ed1c ]--- This happens because we try to register an IRQ domain with a NULL ops structure, and the first thing irq_domain_add() does is try to dereference this ops structure. So, fix the problem by getting rid of the incorrect OF_IRQ ifdef and wrapping the IRQ domain bits of the driver with an IRQ_DOMAIN ifdef instead. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-07 09:47:21 +00:00
gpu/mfd/usb: Fix USB randconfig problems Fix config warning: warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies (USB_SUPPORT && USB_ARCH_HAS_HCD) and build error: ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined! by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C drivers/i2c/Kconfig:5: symbol I2C is selected by FB_DDC drivers/video/Kconfig:86: symbol FB_DDC is selected by FB_CYBER2000_DDC drivers/video/Kconfig:385: symbol FB_CYBER2000_DDC depends on FB_CYBER2000 drivers/video/Kconfig:373: symbol FB_CYBER2000 depends on FB which is due to drivers/usb/Kconfig: config USB_ARCH_HAS_OHCI ... default y if ARCH_PNX4008 && I2C Fix by dropping I2C from the above dependency; logic is that this is not a platform dependency but a configuration dependency: the _architecture_ still supports USB even is I2C is not selected. This exposes: drivers/video/Kconfig:36:error: recursive dependency detected! drivers/video/Kconfig:36: symbol FB is selected by DRM_KMS_HELPER drivers/gpu/drm/Kconfig:28: symbol DRM_KMS_HELPER is selected by DRM_UDL drivers/gpu/drm/udl/Kconfig:1: symbol DRM_UDL depends on USB_ARCH_HAS_HCD drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB drivers/mfd/Kconfig:396: symbol MFD_TC6393XB depends on GPIOLIB drivers/gpio/Kconfig:35: symbol GPIOLIB is selected by FB_VIA drivers/video/Kconfig:1560: symbol FB_VIA depends on FB which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-20 11:23:16 -07:00
mfd: Fix build break of max77693 by adding REGMAP_I2C option This patch add REGMAP_I2C config option to fix build break of max77693 mfd driver because max77693 use regmap interface for i2c communication. drivers/mfd/max77693.c:103: error: variable 'max77693_regmap_config' has initializer but incomplete type drivers/mfd/max77693.c:104: error: unknown field 'reg_bits' specified in initializer drivers/mfd/max77693.c:104: warning: excess elements in struct initializer drivers/mfd/max77693.c:104: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c:105: error: unknown field 'val_bits' specified in initializer drivers/mfd/max77693.c:105: warning: excess elements in struct initializer drivers/mfd/max77693.c:105: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c:106: error: unknown field 'max_register' specified in initializer drivers/mfd/max77693.c:106: warning: excess elements in struct initializer drivers/mfd/max77693.c:106: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c: In function 'max77693_i2c_probe': drivers/mfd/max77693.c:122: error: implicit declaration of function 'devm_regmap_init_i2c' drivers/mfd/max77693.c:122: warning: assignment makes pointer from integer without a cast Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-24 15:08:58 +09:00
mfd: ab8500-core should depend on MFD_DB8500_PRCMU A recent move to eliminate excess historical baggage from ab8500 core code resulting in errors when building with x86_64 allmodconfig: In file included from drivers/mfd/ab8500-core.c:21:0: include/linux/mfd/dbx500-prcmu.h:614:19: error: redefinition of 'prcmu_abb_read' include/linux/mfd/db8500-prcmu.h:673:19: note: previous definition of 'prcmu_abb_read' was here include/linux/mfd/dbx500-prcmu.h:619:19: error: redefinition of 'prcmu_abb_write' include/linux/mfd/db8500-prcmu.h:678:19: note: previous definition of 'prcmu_abb_write' was here include/linux/mfd/dbx500-prcmu.h:630:19: error: redefinition of 'prcmu_config_clkout' include/linux/mfd/db8500-prcmu.h:643:19: note: previous definition of 'prcmu_config_clkout' was here include/linux/mfd/dbx500-prcmu.h:692:20: error: redefinition of 'prcmu_ac_wake_req' include/linux/mfd/db8500-prcmu.h:683:20: note: previous definition of 'prcmu_ac_wake_req' was here include/linux/mfd/dbx500-prcmu.h:694:20: error: redefinition of 'prcmu_ac_sleep_req' include/linux/mfd/db8500-prcmu.h:685:20: note: previous definition of 'prcmu_ac_sleep_req' was here Problem: When CONFIG_AB8500_CORE is set, building ab8500-core.c and !(CONFIG_UX500_SOC_DB8500 | CONFIG_MFD_DB8500_PRCMU), both db8500-prcmu.h and dbx500-prcmu.h take it upon themselves to _both_ create 'return 0' inline functions for the following: prcmu_abb_read() prcmu_abb_write() prcmu_config_clkout() prcmu_ac_wake_req() prcmu_ac_sleep_req() Solution: Depend on MFD_DB8500_PRCMU, which in turn depends on UX500_SOC_DB8500. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23 10:22:10 +01:00