linux

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2019-05-27 08:55:01 +02:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

net: devlink: add port type spinlock Add spinlock to protect port type and type_dev pointer consistency. Without that, userspace may see inconsistent type and type_dev combinations. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v1->v2: - rebased Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-24 11:14:37 +01:00

devlink: add warning in case driver does not set port type Prevent misbehavior of drivers who would not set port type for longer period of time. Drivers should always set port type. Do WARN if that happens. Note that it is perfectly fine to temporarily not have the type set, during initialization and port type change. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-05-23 10:43:35 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: extend devlink_trap_report() to accept cookie and pass Add cookie argument to devlink_trap_report() allowing driver to pass in the user cookie. Pass on the cookie down to drop monitor code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-25 11:45:21 +01:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:15 -07:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add support for creating and destroying regions This allows a device to register its supported address regions. Each address region can be accessed directly for example reading the snapshots taken of this address space. Drivers are not limited in the name selection for different regions. An example of a region-name can be: pci cr-space, register-space. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:08 +03:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Change devlink health locking mechanism The devlink health reporters create/destroy and user commands currently use the devlink->lock as a locking mechanism. Different reporters have different rules in the driver and are being created/destroyed during different stages of driver load/unload/running. So during execution of a reporter recover the flow can go through another reporter's destroy and create. Such flow leads to deadlock trying to lock a mutex already held. With the new locking mechanism the different reporters share mutex lock only to protect access to shared reporters list. Added refcount per reporter, to protect the reporters from destroy while being used. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-29 12:41:45 +03:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap policers support Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:18 +03:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:15 -07:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Add comment for devlink instance lock Add comment to describe the purpose of devlink instance lock. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-21 19:53:53 +03:00

devlink: disallow reload operation during device cleanup There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo 10 > /sys/bus/netdevsim/new_device devlink dev reload netdevsim/netdevsim10 & echo 10 > /sys/bus/netdevsim/del_device done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-08 21:42:43 +01:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Refactor physical port attributes To support additional devlink port flavours and to support few common and few different port attributes, move physical port attributes to a different structure. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:35 -05:00

devlink: Replace devlink_port_attrs_set parameters with a struct Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:16 +03:00

devlink: Refactor physical port attributes To support additional devlink port flavours and to support few common and few different port attributes, move physical port attributes to a different structure. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:35 -05:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

2020-09-09 07:50:37 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce external controller flag A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:36 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce PCI PF port flavour and port attribute In an eswitch, PCI PF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with PF and a representor netdevice, introduce a PCI PF port flavour and port attriute. When devlink port flavour is PCI PF, fill up PCI PF attributes of the port. Extend port name creation using PCI PF number on best effort basis. So that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:37 -05:00

2020-09-09 07:50:37 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce external controller flag A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:36 +03:00

devlink: Introduce PCI PF port flavour and port attribute In an eswitch, PCI PF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with PF and a representor netdevice, introduce a PCI PF port flavour and port attriute. When devlink port flavour is PCI PF, fill up PCI PF attributes of the port. Extend port name creation using PCI PF number on best effort basis. So that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:37 -05:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

2020-09-09 07:50:37 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce external controller flag A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:36 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce PCI VF port flavour and port attribute In an eswitch, PCI VF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with VF, and its representor netdevice, introduce a PCI VF port flavour. When devlink port flavour is PCI VF, fill up PCI VF attributes of the port. Extend port name creation using PCI PF and VF number scheme on best effort basis, so that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0 pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:38 -05:00

2020-09-09 07:50:37 +03:00

devlink: Move structure comments outside of structure To add more fields to the PCI PF and VF port attributes, follow standard structure comment format. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:35 +03:00

devlink: Introduce external controller flag A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:36 +03:00

devlink: Introduce PCI VF port flavour and port attribute In an eswitch, PCI VF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with VF, and its representor netdevice, introduce a PCI VF port flavour. When devlink port flavour is PCI VF, fill up PCI VF attributes of the port. Extend port name creation using PCI PF and VF number scheme on best effort basis, so that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0 pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:38 -05:00

devlink: Replace devlink_port_attrs_set parameters with a struct Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:16 +03:00

devlink: Add a new devlink port split ability attribute and pass to netlink Add a new attribute that indicates the split ability of devlink port. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:20 +03:00

devlink: Add a new devlink port lanes attribute and pass to netlink Add a new devlink port attribute that indicates the port's number of lanes. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. The attribute is not passed to user space in case the number of lanes is invalid (0). Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:18 +03:00

devlink: Replace devlink_port_attrs_set parameters with a struct Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:16 +03:00

devlink: Add comment block for missing port attributes Add comment block for physical, PF and VF port attributes. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:34 +03:00

devlink: Replace devlink_port_attrs_set parameters with a struct Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:16 +03:00

devlink: introduce devlink_port_attrs_set Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-18 09:29:00 +02:00

devlink: Add a new devlink port split ability attribute and pass to netlink Add a new attribute that indicates the split ability of devlink port. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:20 +03:00

devlink: Add a new devlink port lanes attribute and pass to netlink Add a new devlink port attribute that indicates the port's number of lanes. Drivers are expected to set it via devlink_port_attrs_set(), before registering the port. The attribute is not passed to user space in case the number of lanes is invalid (0). Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:18 +03:00

devlink: extend attrs_set for setting port flavours Devlink ports can have specific flavour according to the purpose of use. This patch extend attrs_set so the driver can say which flavour port has. Initial flavours are: physical, cpu, dsa User can query this to see right away what is the purpose of each port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-18 09:29:01 +02:00

net: devlink: extend port attrs for switch ID Extend devlink_port_attrs_set() to pass switch ID for ports which are part of switch and store it in port attrs. For other ports, this is NULL. Note that this allows the driver to group devlink ports into one or more switches according to the actual topology. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-03 14:24:16 +02:00

devlink: Refactor physical port attributes To support additional devlink port flavours and to support few common and few different port attributes, move physical port attributes to a different structure. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:35 -05:00

devlink: Introduce PCI PF port flavour and port attribute In an eswitch, PCI PF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with PF and a representor netdevice, introduce a PCI PF port flavour and port attriute. When devlink port flavour is PCI PF, fill up PCI PF attributes of the port. Extend port name creation using PCI PF number on best effort basis. So that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:37 -05:00

devlink: Introduce PCI VF port flavour and port attribute In an eswitch, PCI VF may have port which is normally represented using a representor netdevice. To have better visibility of eswitch port, its association with VF, and its representor netdevice, introduce a PCI VF port flavour. When devlink port flavour is PCI VF, fill up PCI VF attributes of the port. Extend port name creation using PCI PF and VF number scheme on best effort basis, so that vendor drivers can skip defining their own scheme. $ devlink port show pci/0000:05:00.0/0: type eth netdev eth0 flavour pcipf pfnum 0 pci/0000:05:00.0/1: type eth netdev eth1 flavour pcivf pfnum 0 vfnum 0 pci/0000:05:00.0/2: type eth netdev eth2 flavour pcivf pfnum 0 vfnum 1 Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:38 -05:00

devlink: Refactor physical port attributes To support additional devlink port flavours and to support few common and few different port attributes, move physical port attributes to a different structure. Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-07-08 23:17:35 -05:00

devlink: introduce devlink_port_attrs_set Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-18 09:29:00 +02:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Add devlink_param for port register and unregister Add functions to register and unregister for the driver supported configuration parameters table per port. v7->v8: - Order the definitions following way as suggested by Jiri. __devlink_params_register __devlink_params_unregister devlink_params_register devlink_params_unregister devlink_port_params_register devlink_port_params_unregister - Append with Acked-by: Jiri Pirko <jiri@mellanox.com>. v2->v3: - Add a helper __devlink_params_register() with common code used by both devlink_params_register() and devlink_port_params_register(). Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-28 18:00:20 +05:30

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Make port index data type as unsigned int Devlink port index attribute is returned to users as u32 through netlink response. Change index data type from 'unsigned' to 'unsigned int' to avoid below checkpatch.pl warning. WARNING: Prefer 'unsigned int' to bare use of 'unsigned' 81: FILE: include/net/devlink.h:81: + unsigned index; Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-30 05:39:44 -05:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

net: devlink: add port type spinlock Add spinlock to protect port type and type_dev pointer consistency. Without that, userspace may see inconsistent type and type_dev combinations. Signed-off-by: Jiri Pirko <jiri@mellanox.com> v1->v2: - rebased Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-24 11:14:37 +01:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: introduce devlink_port_attrs_set Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-18 09:29:00 +02:00

devlink: Move switch_port attribute of devlink_port_attrs to devlink_port The struct devlink_port_attrs holds the attributes of devlink_port. Similarly to the previous patch, 'switch_port' attribute is another exception. Move 'switch_port' to be devlink_port's field. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:15 +03:00

devlink: add warning in case driver does not set port type Prevent misbehavior of drivers who would not set port type for longer period of time. Drivers should always set port type. Do WARN if that happens. Note that it is perfectly fine to temporarily not have the type set, during initialization and port type change. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-05-23 10:43:35 +02:00

devlink: Implement devlink health reporters on per-port basis Add devlink-health reporter support on per-port basis. The main difference existing devlink-health is that port reporters are stored in per-devlink_port lists. Upon creation of such health reporter the reference to a port it belongs to is stored in reporter struct. Fill the port index attribute in devlink-health response to allow devlink userspace utility to distinguish between device and port reporters. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-10 15:25:10 +03:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

net: devlink: report cell size of shared buffers Shared buffer allocation is usually done in cell increments. Drivers will either round up the allocation or refuse the configuration if it's not an exact multiple of cell size. Drivers know exactly the cell size of shared buffer, so help out users by providing this information in dumps. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-01 17:56:28 -08:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add relation between dpipe and resource The hardware processes which are modeled via dpipe commonly use some internal hardware resources. Such relation can improve the understanding of hardware limitations. The number of resource's unit consumed per table's entry are also provided for each table. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:05 +01:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add relation between dpipe and resource The hardware processes which are modeled via dpipe commonly use some internal hardware resources. Such relation can improve the understanding of hardware limitations. The number of resource's unit consumed per table's entry are also provided for each table. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:05 +01:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add support for dynamic table size Up until now the dpipe table's size was static and known at registration time. The host table does not have constant size and it is resized in dynamic manner. In order to support this behavior the size is changed to be obtained dynamically via an op. This patch also adjust the current dpipe table for the new API. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:40:02 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add support for dynamic table size Up until now the dpipe table's size was static and known at registration time. The host table does not have constant size and it is resized in dynamic manner. In order to support this behavior the size is changed to be obtained dynamically via an op. This patch also adjust the current dpipe table for the new API. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:40:02 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

mlxsw: spectrum: Fix handling of resource_size_param Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-02-28 13:12:09 +01:00

devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 22:13:21 +02:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

mlxsw: spectrum: Fix handling of resource_size_param Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-02-28 13:12:09 +01:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 22:13:21 +02:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: Add helper function for safely copy string param Devlink string param buffer is allocated at the size of DEVLINK_PARAM_MAX_STRING_VALUE. Add helper function which makes sure this size is not exceeded. Renamed DEVLINK_PARAM_MAX_STRING_VALUE to __DEVLINK_PARAM_MAX_STRING_VALUE to emphasize that it should be used by devlink only. The driver should use the helper function instead to verify it doesn't exceed the allowed length. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-10 16:09:27 +03:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add helper function for safely copy string param Devlink string param buffer is allocated at the size of DEVLINK_PARAM_MAX_STRING_VALUE. Add helper function which makes sure this size is not exceeded. Renamed DEVLINK_PARAM_MAX_STRING_VALUE to __DEVLINK_PARAM_MAX_STRING_VALUE to emphasize that it should be used by devlink only. The driver should use the helper function instead to verify it doesn't exceed the allowed length. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-10 16:09:27 +03:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add param set command Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:30 +03:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add param set command Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:30 +03:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: publish params only after driver init is done Currently, user can do dump or get of param values right after the devlink params are registered. However the driver may not be initialized which is an issue. The same problem happens during notification upon param registration. Allow driver to publish devlink params whenever it is ready to handle get() ops. Note that this cannot be resolved by init reordering, as the "driverinit" params have to be available before the driver is initialized (it needs the param values there). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:22:45 +00:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add generic parameters internal_err_reset and max_macs Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:33 +03:00

devlink: Add enable_sriov boolean generic parameter enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:36 +03:00

devlink: Add generic parameters region_snapshot region_snapshot - When set enables capturing region snapshots Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:17 +03:00

devlink: Add generic parameter ignore_ari ignore_ari - Device ignores ARI(Alternate Routing ID) capability, even when platforms has the support and creates same number of partitions when platform does not support ARI capability. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:44 +05:30

devlink: Add generic parameter msix_vec_per_pf_max msix_vec_per_pf_max - This param sets the number of MSIX vectors that the device requests from the host on driver initialization. This value is set in the device which is applicable per PF. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:45 +05:30

devlink: Add generic parameter msix_vec_per_pf_min msix_vec_per_pf_min - This param sets the number of minimal MSIX vectors required for the device initialization. This value is set in the device which limits MSIX vectors per PF. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:46 +05:30

devlink: Add 'fw_load_policy' generic parameter Many drivers load the device's firmware image during the initialization flow either from the flash or from the disk. Currently this option is not controlled by the user and the driver decides from where to load the firmware image. 'fw_load_policy' gives the ability to control this option which allows the user to choose between different loading policies supported by the driver. This parameter can be useful while testing and/or debugging the device. For example, testing a firmware bug fix. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-12-03 07:58:59 +00:00

devlink: add 'reset_dev_on_drv_probe' param Add the 'reset_dev_on_drv_probe' devlink parameter, controlling the device reset policy on driver probe. This parameter is useful in conjunction with the existing 'fw_load_policy' parameter. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-09-09 00:54:18 +01:00

devlink: Add new "enable_roce" generic device param New device parameter to enable/disable handling of RoCE traffic in the device. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2019-11-08 23:45:20 +00:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: Add generic parameters internal_err_reset and max_macs Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:33 +03:00

devlink: Add enable_sriov boolean generic parameter enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:36 +03:00

devlink: Add generic parameters region_snapshot region_snapshot - When set enables capturing region snapshots Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:17 +03:00

devlink: Add generic parameter ignore_ari ignore_ari - Device ignores ARI(Alternate Routing ID) capability, even when platforms has the support and creates same number of partitions when platform does not support ARI capability. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:44 +05:30

devlink: Add generic parameter msix_vec_per_pf_max msix_vec_per_pf_max - This param sets the number of MSIX vectors that the device requests from the host on driver initialization. This value is set in the device which is applicable per PF. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:45 +05:30

devlink: Add generic parameter msix_vec_per_pf_min msix_vec_per_pf_min - This param sets the number of minimal MSIX vectors required for the device initialization. This value is set in the device which limits MSIX vectors per PF. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-04 11:13:46 +05:30

devlink: Add 'fw_load_policy' generic parameter Many drivers load the device's firmware image during the initialization flow either from the flash or from the disk. Currently this option is not controlled by the user and the driver decides from where to load the firmware image. 'fw_load_policy' gives the ability to control this option which allows the user to choose between different loading policies supported by the driver. This parameter can be useful while testing and/or debugging the device. For example, testing a firmware bug fix. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-12-03 07:58:59 +00:00

devlink: add 'reset_dev_on_drv_probe' param Add the 'reset_dev_on_drv_probe' devlink parameter, controlling the device reset policy on driver probe. This parameter is useful in conjunction with the existing 'fw_load_policy' parameter. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-09-09 00:54:18 +01:00

devlink: Add new "enable_roce" generic device param New device parameter to enable/disable handling of RoCE traffic in the device. Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2019-11-08 23:45:20 +00:00

devlink: Add generic parameters internal_err_reset and max_macs Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:33 +03:00

devlink: add generic info version names Add defines and docs for generic info versions. v3: - add docs; - separate patch (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:42 -08:00

devlink: add a generic board.manufacture version name At Jiri's suggestion add a generic "board.manufacture" version identifier. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-10 19:35:29 -08:00

devlink: add generic info version names Add defines and docs for generic info versions. v3: - add docs; - separate patch (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:42 -08:00

devlink: Add new info version tags for ASIC and FW The current tag set is still rather small and needs a couple more tags to help with ASIC identification and to have a more generic FW version. Cc: Jiri Pirko <jiri@resnulli.us> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-09-03 15:28:03 -07:00

devlink: add generic info version names Add defines and docs for generic info versions. v3: - add docs; - separate patch (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:42 -08:00

devlink: Add macro for "fw.mgmt.api" to info_get cb. Add definition and documentation for the new generic info "fw.mgmt.api". This macro specifies the version of the software interfaces between driver and firmware. Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-27 15:04:51 +05:30

devlink: add generic info version names Add defines and docs for generic info versions. v3: - add docs; - separate patch (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:42 -08:00

devlink: add macro for "fw.psid" The "fw.psid" devlink info version is documented in devlink-info.rst, and used by one driver. However, there is no associated macro for this firmware version like there is for others. Add one now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-09 14:46:09 -08:00

devlink: add macro for "fw.roce" Add definition and documentation for the new generic info "fw.roce". v2: Remove board.nvm_cfg since fw.psid is similar. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-27 04:56:25 -05:00

devlink: promote "fw.bundle_id" to a generic info version The nfp driver uses ``fw.bundle_id`` to represent a unique identifier of the entire firmware bundle. A future change is going to introduce a similar notion in the ice driver, so promote ``fw.bundle_id`` into a generic version now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

2020-03-11 18:58:16 -07:00

devlink: add generic info version names Add defines and docs for generic info versions. v3: - add docs; - separate patch (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:42 -08:00

devlink: Add support for creating and destroying regions This allows a device to register its supported address regions. Each address region can be accessed directly for example reading the snapshots taken of this address space. Drivers are not limited in the name selection for different regions. An example of a region-name can be: pci cr-space, register-space. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:08 +03:00

devlink: add device information API ethtool -i has served us well for a long time, but its showing its limitations more and more. The device information should also be reported per device not per-netdev. Lay foundation for a simple devlink-based way of reading device info. Add driver name and device serial number as initial pieces of information exposed via this new API. v3: - rename helpers (Jiri); - rename driver name attr (Jiri); - remove double spacing in commit message (Jiri). RFC v2: - wrap the skb into an opaque structure (Jiri); - allow the serial number of be any length (Jiri & Andrew); - add driver name (Jonathan). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:40 -08:00

devlink: Add support for creating and destroying regions This allows a device to register its supported address regions. Each address region can be accessed directly for example reading the snapshots taken of this address space. Drivers are not limited in the name selection for different regions. An example of a region-name can be: pci cr-space, register-space. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:08 +03:00

devlink: prepare to support region operations Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:08 -07:00

devlink: convert snapshot destructor callback to region op It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:09 -07:00

devlink: implement DEVLINK_CMD_REGION_NEW Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:16 -07:00

devlink: prepare to support region operations Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:08 -07:00

devlink: convert snapshot destructor callback to region op It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:09 -07:00

devlink: implement DEVLINK_CMD_REGION_NEW Implement support for the DEVLINK_CMD_REGION_NEW command for creating snapshots. This new command parallels the existing DEVLINK_CMD_REGION_DEL. In order for DEVLINK_CMD_REGION_NEW to work for a region, the new ".snapshot" operation must be implemented in the region's ops structure. The desired snapshot id must be provided. This helps avoid confusion on the purpose of DEVLINK_CMD_REGION_NEW, and keeps the API simpler. The requested id will be inserted into the xarray tracking the number of snapshots using each id. If this id is already used by another snapshot on any region, an error will be returned. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:16 -07:00

devlink: prepare to support region operations Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:08 -07:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Add support for direct reporter health state update It is possible that a reporter state will be updated due to a recover flow which is not triggered by a devlink health related operation, but as a side effect of some other operation in the system. Expose devlink health API for a direct update of a reporter status. Move devlink_health_reporter_state enum definition to devlink.h so it could be used from drivers as a parameter of devlink_health_reporter_state_update. In addition, add trace_devlink_health_reporter_state_update to provide user notification for reporter state change. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-03 10:57:30 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: propagate extack down to health reporter ops During health reporter operations, driver might want to fill-up the extack message, so propagate extack down to the health reporter ops. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-10 15:18:49 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: propagate extack down to health reporter ops During health reporter operations, driver might want to fill-up the extack message, so propagate extack down to the health reporter ops. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-10 15:18:49 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: propagate extack down to health reporter ops During health reporter operations, driver might want to fill-up the extack message, so propagate extack down to the health reporter ops. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-10 15:18:49 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Add packet trap policers support Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:18 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap group parameters support Packet trap groups are used to aggregate logically related packet traps. Currently, these groups allow user space to batch operations such as setting the trap action of all member traps. In order to prevent the CPU from being overwhelmed by too many trapped packets, it is desirable to bind a packet trap policer to these groups. For example, to limit all the packets that encountered an exception during routing to 10Kpps. Allow device drivers to bind default packet trap policers to packet trap groups when the latter are registered with devlink. The next patch will enable user space to change this default binding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:21 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap group parameters support Packet trap groups are used to aggregate logically related packet traps. Currently, these groups allow user space to batch operations such as setting the trap action of all member traps. In order to prevent the CPU from being overwhelmed by too many trapped packets, it is desirable to bind a packet trap policer to these groups. For example, to limit all the packets that encountered an exception during routing to 10Kpps. Allow device drivers to bind default packet trap policers to packet trap groups when the latter are registered with devlink. The next patch will enable user space to change this default binding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:21 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: add trap metadata type for cookie Allow driver to indicate cookie metadata for registered traps. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-25 11:45:19 +01:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

Documentation: Add devlink-trap documentation Add initial documentation of the devlink-trap mechanism, explaining the background, motivation and the semantics of the interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:19 +03:00

devlink: move devlink documentation to subfolder Combine the documentation for devlink into a subfolder, and provide an index.rst file that can be used to generally describe devlink. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-09 14:46:10 -08:00

Documentation: Add devlink-trap documentation Add initial documentation of the devlink-trap mechanism, explaining the background, motivation and the semantics of the interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:19 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add layer 3 generic packet traps Add packet traps that can report packets that were dropped during layer 3 forwarding. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-07 18:42:09 +02:00

devlink: Add layer 3 generic packet exception traps Add layer 3 generic packet exception traps that can report trapped packets and documentation of the traps. Unlike drop traps, these exception traps also need to inject the packet to the kernel's receive path. For example, a packet that was trapped due to unreachable neighbour need to be injected into the kernel so that it will trigger an ARP request or a neighbour solicitation message. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-07 18:42:14 +02:00

devlink: Add non-routable packet trap Add packet trap that can report packets that reached the router, but are non-routable. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:48 +02:00

devlink: Add tunnel generic packet traps Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:54 +02:00

devlink: Add overlay source MAC is multicast trap Add packet trap that can report NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:58 +02:00

devlink: add ACL generic packet traps Add packet traps that can report packets that were dropped during ACL processing. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-24 08:35:47 +01:00

devlink: Add layer 2 control packet traps Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:41 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

devlink: Add ACL control packet traps Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:43 +03:00

devlink: Add early_drop trap Add the packet trap that can report packets that were ECN marked due to RED AQM. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-08-03 19:11:33 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

Documentation: Add devlink-trap documentation Add initial documentation of the devlink-trap mechanism, explaining the background, motivation and the semantics of the interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:19 +03:00

devlink: move devlink documentation to subfolder Combine the documentation for devlink into a subfolder, and provide an index.rst file that can be used to generally describe devlink. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-09 14:46:10 -08:00

Documentation: Add devlink-trap documentation Add initial documentation of the devlink-trap mechanism, explaining the background, motivation and the semantics of the interface. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:19 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Create dedicated trap group for layer 3 exceptions Packets that hit exceptions during layer 3 forwarding must be trapped to the CPU for the control plane to function properly. Create a dedicated group for them, so that user space could choose to assign a different policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:36 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add tunnel generic packet traps Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:54 +02:00

devlink: add ACL generic packet traps Add packet traps that can report packets that were dropped during ACL processing. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-24 08:35:47 +01:00

devlink: Add layer 2 control packet traps Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:41 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

mlxsw: spectrum: Use different trap group for externally routed packets Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-29 12:26:44 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

devlink: Add ACL control packet traps Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:43 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add layer 3 generic packet traps Add packet traps that can report packets that were dropped during layer 3 forwarding. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-07 18:42:09 +02:00

devlink: Add layer 3 generic packet exception traps Add layer 3 generic packet exception traps that can report trapped packets and documentation of the traps. Unlike drop traps, these exception traps also need to inject the packet to the kernel's receive path. For example, a packet that was trapped due to unreachable neighbour need to be injected into the kernel so that it will trigger an ARP request or a neighbour solicitation message. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-07 18:42:14 +02:00

devlink: Add non-routable packet trap Add packet trap that can report packets that reached the router, but are non-routable. For example, IGMP queries can be flooded by the device in layer 2 and reach the router. Such packets should not be routed and instead dropped. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:48 +02:00

devlink: Add tunnel generic packet traps Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:54 +02:00

devlink: Add overlay source MAC is multicast trap Add packet trap that can report NVE packets that the device decided to drop because their overlay source MAC is multicast. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:58 +02:00

devlink: add ACL generic packet traps Add packet traps that can report packets that were dropped during ACL processing. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-24 08:35:47 +01:00

devlink: Add layer 2 control packet traps Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:41 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

devlink: Add ACL control packet traps Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:43 +03:00

devlink: Add early_drop trap Add the packet trap that can report packets that were ECN marked due to RED AQM. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-08-03 19:11:33 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Create dedicated trap group for layer 3 exceptions Packets that hit exceptions during layer 3 forwarding must be trapped to the CPU for the control plane to function properly. Create a dedicated group for them, so that user space could choose to assign a different policer for them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:36 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Add tunnel generic packet traps Add packet traps that can report packets that were dropped during tunnel decapsulation. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-19 15:00:54 +02:00

devlink: add ACL generic packet traps Add packet traps that can report packets that were dropped during ACL processing. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-24 08:35:47 +01:00

devlink: Add layer 2 control packet traps Add layer 2 control packet traps such as STP and IGMP query, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:41 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

mlxsw: spectrum: Use different trap group for externally routed packets Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-29 12:26:44 +03:00

devlink: Add layer 3 control packet traps Add layer 3 control packet traps such as ARP and DHCP, so that capable device drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:42 +03:00

devlink: Add ACL control packet traps Add packet traps for packets that are sampled / trapped by ACLs, so that capable drivers could register them with devlink. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-05-29 21:36:43 +03:00

devlink: Add generic packet traps and groups Add generic packet traps and groups that can report dropped packets as well as exceptions such as TTL error. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:18 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Only pass packet trap group identifier in trap structure Packet trap groups are now explicitly registered by drivers and not implicitly registered when the packet traps are registered. Therefore, there is no need to encode entire group structure the trap is associated with inside the trap structure. Instead, only pass the group identifier. Refer to it as initial group identifier, as future patches will allow user space to move traps between groups. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:30 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap group parameters support Packet trap groups are used to aggregate logically related packet traps. Currently, these groups allow user space to batch operations such as setting the trap action of all member traps. In order to prevent the CPU from being overwhelmed by too many trapped packets, it is desirable to bind a packet trap policer to these groups. For example, to limit all the packets that encountered an exception during routing to 10Kpps. Allow device drivers to bind default packet trap policers to packet trap groups when the latter are registered with devlink. The next patch will enable user space to change this default binding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:21 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap group parameters support Packet trap groups are used to aggregate logically related packet traps. Currently, these groups allow user space to batch operations such as setting the trap action of all member traps. In order to prevent the CPU from being overwhelmed by too many trapped packets, it is desirable to bind a packet trap policer to these groups. For example, to limit all the packets that encountered an exception during routing to 10Kpps. Allow device drivers to bind default packet trap policers to packet trap groups when the latter are registered with devlink. The next patch will enable user space to change this default binding. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:21 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add packet trap policers support Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:18 +03:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

net: devlink: allow to change namespaces during reload All devlink instances are created in init_net and stay there for a lifetime. Allow user to be able to move devlink instances into namespaces during devlink reload operation. That ensures proper re-instantiation of driver objects, including netdevices. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-03 11:49:39 +02:00

net: devlink: split reload op into two In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-09-12 10:49:45 +02:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Add extack to reload and port_{un, }split operations Add extack argument to reload, port_split and port_unsplit operations. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-06-05 08:14:09 -07:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

net: devlink: Add extack to shared buffer operations Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-22 12:08:39 +00:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

net: devlink: Add extack to shared buffer operations Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-22 12:08:39 +00:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

net: devlink: Add extack to shared buffer operations Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-22 12:08:39 +00:00

devlink: implement shared buffer occupancy monitoring interface User needs to monitor shared buffer occupancy. For that, he issues a snapshot command in order to instruct hardware to catch current and maximal occupancy values, and clear command in order to clear the historical maximal values. Also port-pool and tc-pool-bind command response messages are extended to carry occupancy values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:14 +02:00

net/devlink: Add E-Switch mode control Add the commands to set and show the mode of SRIOV E-Switch, two modes are supported: * legacy: operating in the "old" L2 based mode (DMAC --> VF vport) * switchdev: the E-Switch is referred to as whitebox switch configured using standard tools such as tc, bridge, openvswitch etc. To allow working with the tools, for each VF, a VF representor netdevice is created by the E-Switch manager vendor device driver instance (e.g PF). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-07-01 14:51:01 +03:00

devlink: Add extack for eswitch operations Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2018-08-15 16:02:18 +03:00

devlink: Add E-Switch inline mode control Some HWs need the VF driver to put part of the packet headers on the TX descriptor so the e-switch can do proper matching and steering. The supported modes: none, link, network, transport. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-11-22 23:09:57 +02:00

devlink: Add extack for eswitch operations Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2018-08-15 16:02:18 +03:00

net/mlx5: Declare more strictly devlink encap mode Devlink has UAPI declaration for encap mode, so there is no need to be loose on the data get/set by drivers. Update call sites to use enum devlink_eswitch_encap_mode instead of plain u8. Suggested-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Petr Vorel <pvorel@suse.cz>

2019-06-12 15:20:11 +03:00

devlink: Add extack for eswitch operations Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2018-08-15 16:02:18 +03:00

devlink: add device information API ethtool -i has served us well for a long time, but its showing its limitations more and more. The device information should also be reported per device not per-netdev. Lay foundation for a simple devlink-based way of reading device info. Add driver name and device serial number as initial pieces of information exposed via this new API. v3: - rename helpers (Jiri); - rename driver name attr (Jiri); - remove double spacing in commit message (Jiri). RFC v2: - wrap the skb into an opaque structure (Jiri); - allow the serial number of be any length (Jiri & Andrew); - add driver name (Jonathan). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:40 -08:00

devlink: add flash update command Add devlink flash update command. Advanced NICs have firmware stored in flash and often cryptographically secured. Updating that flash is handled by management firmware. Ethtool has a flash update command which served us well, however, it has two shortcomings: - it takes rtnl_lock unnecessarily - really flash update has nothing to do with networking, so using a networking device as a handle is suboptimal, which leads us to the second one: - it requires a functioning netdev - in case device enters an error state and can't spawn a netdev (e.g. communication with the device fails) there is no netdev to use as a handle for flashing. Devlink already has the ability to report the firmware versions, now with the ability to update the firmware/flash we will be able to recover devices in bad state. To enable updates of sub-components of the FW allow passing component name. This name should correspond to one of the versions reported in devlink info. v1: - replace target id with component name (Jiri). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-14 13:40:44 -08:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Pass extack when setting trap's action and group's parameters A later patch will refuse to set the action of certain traps in mlxsw and also to change the policer binding of certain groups. Pass extack so that failure could be communicated clearly to user space. Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-08-03 19:11:34 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Allow setting of packet trap group parameters The previous patch allowed device drivers to publish their default binding between packet trap policers and packet trap groups. However, some users might not be content with this binding and would like to change it. In case user space passed a packet trap policer identifier when setting a packet trap group, invoke the appropriate device driver callback and pass the new policer identifier. v2: * Check for presence of 'DEVLINK_ATTR_TRAP_POLICER_ID' in devlink_trap_group_set() and bail if not present * Add extack error message in case trap group was partially modified Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:22 +03:00

devlink: Pass extack when setting trap's action and group's parameters A later patch will refuse to set the action of certain traps in mlxsw and also to change the policer binding of certain groups. Pass extack so that failure could be communicated clearly to user space. Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-08-03 19:11:34 +03:00

devlink: Add packet trap policers support Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:18 +03:00

net/devlink: Support querying hardware address of port function PCI PF and VF devlink port can manage the function represented by a devlink port. Enable users to query port function's hardware address. Example of a PCI VF port which supports a port function: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:11:22:33:44:66 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "enp6s0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "function": { "hw_addr": "00:11:22:33:44:66" } } } } Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-06-19 03:32:48 +00:00

net/devlink: Support setting hardware address of port function PCI PF and VF devlink port can manage the function represented by a devlink port. Allow users to set port function's hardware address. Example of a PCI VF port which supports a port function: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 $ devlink port function set pci/0000:06:00.0/2 hw_addr 00:11:22:33:44:55 $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:11:22:33:44:55 Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-06-19 03:32:49 +00:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

net: replace ndo_get_devlink with ndo_get_devlink_port Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-28 13:56:36 +01:00

devlink: create a special NDO for getting the devlink instance Instead of iterating over all devlink ports add a NDO which will return the devlink instance from the driver. v2: add the netdev_to_devlink() helper (Michal) v3: check that devlink has ops (Florian) v4: hold devlink_mutex (Jiri) Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-25 19:34:03 -08:00

net: replace ndo_get_devlink with ndo_get_devlink_port Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-28 13:56:36 +01:00

devlink: create a special NDO for getting the devlink instance Instead of iterating over all devlink ports add a NDO which will return the devlink instance from the driver. v2: add the netdev_to_devlink() helper (Michal) v3: check that devlink has ops (Florian) v4: hold devlink_mutex (Jiri) Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-25 19:34:03 -08:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

net: devlink: export devlink net getter Allow drivers to get net struct for devlink instance. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-03 11:49:31 +02:00

net: devlink: export devlink net setter For newly allocated devlink instance allow drivers to set net struct Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-10-05 08:10:31 +02:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: disallow reload operation during device cleanup There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo 10 > /sys/bus/netdevsim/new_device devlink dev reload netdevsim/netdevsim10 & echo 10 > /sys/bus/netdevsim/del_device done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-08 21:42:43 +01:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: introduce devlink_port_attrs_set Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-05-18 09:29:00 +02:00

devlink: Replace devlink_port_attrs_set parameters with a struct Currently, devlink_port_attrs_set accepts a long list of parameters, that most of them are devlink port's attributes. Use the devlink_port_attrs struct to replace the relevant parameters. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-09 16:18:16 +03:00

2020-09-09 07:50:37 +03:00

devlink: Introduce external controller flag A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-09-09 07:50:36 +03:00

devlink: add shared buffer configuration Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-04-14 18:19:13 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add support for dynamic table size Up until now the dpipe table's size was static and known at registration time. The host table does not have constant size and it is resized in dynamic manner. In order to support this behavior the size is changed to be obtained dynamically via an op. This patch also adjust the current dpipe table for the new API. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:40:02 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Move dpipe entry clear function into devlink The entry clear routine can be shared between the drivers, thus it is moved inside devlink. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:40:03 +02:00

devlink: Support for pipeline debug (dpipe) The pipeline debug is used to export the pipeline abstractions for the main objects - tables, headers and entries. The only support for set is for changing the counter parameter on specific table. The basic structures: Header - can represent a real protocol header information or internal metadata. Generic protocol headers like IPv4 can be shared between drivers. Each driver can add local headers. Field - part of a header. Can represent protocol field or specific ASIC metadata field. Hardware special metadata fields can be mapped to different resources, for example switch ASIC ports can have internal number which from the systems point of view is mapped to netdeivce ifindex. Match - represent specific match rule. Can describe match on specific field or header. The header index should be specified as well in order to support several header instances of the same type (tunneling). Action - represents specific action rule. Actions can describe operations on specific field values for example like set, increment, etc. And header operation like add and delete. Value - represents value which can be associated with specific match or action. Table - represents a hardware block which can be described with match/ action behavior. The match/action can be done on the packets data or on the internal metadata that it gathered along the packets traversal throw the pipeline which is vendor specific and should be exported in order to provide understanding of ASICs behavior. Entry - represents single record in a specific table. The entry is identified by specific combination of values for match/action. Prior to accessing the tables/entries the drivers provide the header/ field data base which is used by driver to user-space. The data base is split between the shared headers and unique headers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-03-28 17:24:10 +02:00

devlink: Add Ethernet header for dpipe This will be used by the IPv4 host table which will be introduced in the following patches. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:39:59 +02:00

devlink: Add IPv4 header for dpipe This will be used by the IPv4 host table which will be introduced in the following patches. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-24 08:40:00 +02:00

devlink: Add IPv6 header for dpipe This will be used by the IPv6 host table which will be introduced in the following patches. The fields in the header are added per-use. This header is global and can be reused by many drivers. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2017-08-31 17:59:12 +02:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 22:13:21 +02:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: Add relation between dpipe and resource The hardware processes which are modeled via dpipe commonly use some internal hardware resources. Such relation can improve the understanding of hardware limitations. The number of resource's unit consumed per table's entry are also provided for each table. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:05 +01:00

devlink: convert occ_get op to separate registration This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-04-05 22:13:21 +02:00

devlink: Add devlink_param register and unregister Define configuration parameters data structure. Add functions to register and unregister the driver supported configuration parameters table. For each parameter registered, the driver should fill all the parameter's fields. In case the only supported configuration mode is "driverinit" the parameter's get()/set() functions are not required and should be set to NULL, for any other configuration mode, these functions are required and should be set by the driver. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:28 +03:00

devlink: publish params only after driver init is done Currently, user can do dump or get of param values right after the devlink params are registered. However the driver may not be initialized which is an issue. The same problem happens during notification upon param registration. Allow driver to publish devlink params whenever it is ready to handle get() ops. Note that this cannot be resolved by init reordering, as the "driverinit" params have to be available before the driver is initialized (it needs the param values there). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:22:45 +00:00

devlink: Add devlink_param for port register and unregister Add functions to register and unregister for the driver supported configuration parameters table per port. v7->v8: - Order the definitions following way as suggested by Jiri. __devlink_params_register __devlink_params_unregister devlink_params_register devlink_params_unregister devlink_port_params_register devlink_port_params_unregister - Append with Acked-by: Jiri Pirko <jiri@mellanox.com>. v2->v3: - Add a helper __devlink_params_register() with common code used by both devlink_params_register() and devlink_port_params_register(). Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-28 18:00:20 +05:30

devlink: Add support for get/set driverinit value "driverinit" configuration mode value is held by devlink to enable the driver query the value after reload. Two additional functions added to help the driver get/set the value from/to devlink: devlink_param_driverinit_value_set() and devlink_param_driverinit_value_get(). Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:31 +03:00

devlink: Add support for driverinit get value for devlink_port Add support for "driverinit" configuration mode value for devlink_port configuration parameters. Add devlink_port_param_driverinit_value_get() function to help the driver get the value from devlink_port. Also, move the common code to __devlink_param_driverinit_value_get() to be used by both device and port params. v7->v8: -Add the missing devlink_port_param_driverinit_value_get() declaration. -Also, order devlink_port_param_driverinit_value_get() after devlink_param_driverinit_value_get/set() calls Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-28 18:00:23 +05:30

2019-01-28 18:00:24 +05:30

devlink: Add devlink notifications support for params Add devlink_param_notify() function to support devlink param notifications. Add notification call to devlink param set, register and unregister functions. Add devlink_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-04 14:30:32 +03:00

devlink: Add devlink notifications support for port params Add notification call for devlink port param set, register and unregister functions. Add devlink_port_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. v7->v8: Order devlink_port_param_value_changed() definitions followed by devlink_param_value_changed() Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-28 18:00:25 +05:30

devlink: Add helper function for safely copy string param Devlink string param buffer is allocated at the size of DEVLINK_PARAM_MAX_STRING_VALUE. Add helper function which makes sure this size is not exceeded. Renamed DEVLINK_PARAM_MAX_STRING_VALUE to __DEVLINK_PARAM_MAX_STRING_VALUE to emphasize that it should be used by devlink only. The driver should use the helper function instead to verify it doesn't exceed the allowed length. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-10-10 16:09:27 +03:00

devlink: prepare to support region operations Modify the devlink region code in preparation for adding new operations on regions. Create a devlink_region_ops structure, and move the name pointer from within the devlink_region structure into the ops structure (similar to the devlink_health_reporter_ops). This prepares the regions to enable support of additional operations in the future such as requesting snapshots, or accessing the region directly without a snapshot. In order to re-use the constant strings in the mlx4 driver their declaration must be changed to 'const char * const' to ensure the compiler realizes that both the data and the pointer cannot change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:08 -07:00

devlink: Add support for creating and destroying regions This allows a device to register its supported address regions. Each address region can be accessed directly for example reading the snapshots taken of this address space. Drivers are not limited in the name selection for different regions. An example of a region-name can be: pci cr-space, register-space. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-07-12 15:13:08 +03:00

devlink: report error once U32_MAX snapshot ids have been used The devlink_snapshot_id_get() function returns a snapshot id. The snapshot id is a u32, so there is no way to indicate an error code. A future change is going to possibly add additional cases where this function could fail. Refactor the function to return the snapshot id in an argument, so that it can return zero or an error value. This ensures that snapshot ids cannot be confused with error values, and aids in the future refactor of snapshot id allocation management. Because there is no current way to release previously used snapshot ids, add a simple check ensuring that an error is reported in case the snapshot_id would over flow. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:14 -07:00

devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:15 -07:00

devlink: remove pointless data_len arg from region snapshot create The size of the snapshot has to be the same as the size of the region, therefore no need to pass it again during snapshot creation. Remove the arg and use region->size instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-09 15:27:15 +02:00

devlink: convert snapshot destructor callback to region op It does not makes sense that two snapshots for a given region would use different destructors. Simplify snapshot creation by adding a .destructor op for regions. This operation will replace the data_destructor for the snapshot creation, and makes snapshot creation easier. Noticed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-26 11:37:09 -07:00

devlink: add device information API ethtool -i has served us well for a long time, but its showing its limitations more and more. The device information should also be reported per device not per-netdev. Lay foundation for a simple devlink-based way of reading device info. Add driver name and device serial number as initial pieces of information exposed via this new API. v3: - rename helpers (Jiri); - rename driver name attr (Jiri); - remove double spacing in commit message (Jiri). RFC v2: - wrap the skb into an opaque structure (Jiri); - allow the serial number of be any length (Jiri & Andrew); - add driver name (Jonathan). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:40 -08:00

devlink: Add support for board.serial_number to info_get cb. Board serial number is a serial number, often available in PCI *Vital Product Data*. Also, update devlink-info.rst documentation file. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-06-20 22:01:56 +05:30

devlink: add version reporting to devlink info API ethtool -i has a few fixed-size fields which can be used to report firmware version and expansion ROM version. Unfortunately, modern hardware has more firmware components. There is usually some datapath microcode, management controller, PXE drivers, and a CPLD load. Running ethtool -i on modern controllers reveals the fact that vendors cram multiple values into firmware version field. Here are some examples from systems I could lay my hands on quickly: tg3: "FFV20.2.17 bc 5720-v1.39" i40e: "6.01 0x800034a4 1.1747.0" nfp: "0.0.3.5 0.25 sriov-2.1.16 nic" Add a new devlink API to allow retrieving multiple versions, and provide user-readable name for those versions. While at it break down the versions into three categories: - fixed - this is the board/fixed component version, usually vendors report information like the board version in the PCI VPD, but it will benefit from naming and common API as well; - running - this is the running firmware version; - stored - this is firmware in the flash, after firmware update this value will reflect the flashed version, while the running version may only be updated after reboot. v3: - add per-type helpers instead of using the special argument (Jiri). RFCv2: - remove the nesting in attr DEVLINK_ATTR_INFO_VERSIONS (now versions are mixed with other info attrs)l - have the driver report versions from the same callback as other info. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:41 -08:00

devlink: Add support for resource abstraction Add support for hardware resource abstraction over devlink. Each resource is identified via id, furthermore it contains information regarding its size and its related sub resources. Each resource can also provide its current occupancy. In some cases the sizes of some resources can be changed, yet for those changes to take place a hot driver reload may be needed. The reload capability will be introduced in the next patch. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2018-01-15 08:59:03 +01:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Force enclosing array on binary fmsg data Add a new API for start/end binary array brackets [] to force array around binary data as required from JSON. With this restriction, re-open API to set binary fmsg data. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2020-02-11 14:32:42 -08:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Force enclosing array on binary fmsg data Add a new API for start/end binary array brackets [] to force array around binary data as required from JSON. With this restriction, re-open API to set binary fmsg data. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

2020-02-11 14:32:42 -08:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Allow large formatted message of binary output Devlink supports pair output of name and value. When the value is binary, it must be presented in an array. If the length of the binary value exceeds fmsg limitation, break the value into chunks internally. Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-11-12 14:07:49 +02:00

devlink: Add devlink formatted message (fmsg) API Devlink fmsg is a mechanism to pass descriptors between drivers and devlink, in json-like format. The API allows the driver to add nested attributes such as object, object pair and value array, in addition to attributes such as name and value. Driver can use this API to fill the fmsg context in a format which will be translated by the devlink to the netlink message later. There is no memory allocation in advance (other than the initial list head), and it dynamically allocates messages descriptors and add them to the list on the fly. When it needs to send the data using SKBs to the netlink layer, it fragments the data between different SKBs. In order to do this fragmentation, it uses virtual nests attributes, to avoid actual nesting use which cannot be divided between different SKBs. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:32 +02:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Implicitly set auto recover flag when registering health reporter When health reporter is registered to devlink, devlink will implicitly set auto recover if and only if the reporter has a recover method. No reason to explicitly get the auto recover flag from the driver. Remove this flag from all drivers that called devlink_health_reporter_create. All existing health reporters set auto recovery to true if they have a recover method. Yet, administrator can unset auto recover via netlink command as prior to this patch. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-29 14:05:54 +03:00

devlink: Add devlink health port reporters API In order to use new devlink port health reporters infrastructure, add corresponding constructor and destructor functions. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-10 15:25:11 +03:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Add devlink health port reporters API In order to use new devlink port health reporters infrastructure, add corresponding constructor and destructor functions. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-07-10 15:25:11 +03:00

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

devlink: Add health report functionality Upon error discover, every driver can report it to the devlink health mechanism via devlink_health_report function, using the appropriate reporter registered to it. Driver can pass error specific context which will be delivered to it as part of the dump / recovery callbacks. Once an error is reported, devlink health will do the following actions: * A log is being send to the kernel trace events buffer * Health status and statistics are being updated for the reporter instance * Object dump is being taken and stored at the reporter instance (as long as there is no other dump which is already stored) * Auto recovery attempt is being done. Depends on: - Auto Recovery configuration - Grace period vs. Time since last recover Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:34 +02:00

devlink: Add support for direct reporter health state update It is possible that a reporter state will be updated due to a recover flow which is not triggered by a devlink health related operation, but as a side effect of some other operation in the system. Expose devlink health API for a direct update of a reporter status. Move devlink_health_reporter_state enum definition to devlink.h so it could be used from drivers as a parameter of devlink_health_reporter_state_update. In addition, add trace_devlink_health_reporter_state_update to provide user notification for reporter state change. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-03 10:57:30 +02:00

devlink: add support for reporter recovery completion It is possible that a reporter recovery completion do not finish successfully when recovery is triggered via devlink_health_reporter_recover as recovery could be processed in different context. In such scenario an error is returned by driver when recover hook is invoked and successful recovery completion is intimated later. Expose devlink recover done API to update recovery stats. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-01-02 21:18:09 +05:30

devlink: Add health reporter create/destroy functionality Devlink health reporter is an instance for reporting, diagnosing and recovering from run time errors discovered by the reporters. Define it's data structure and supported operations. In addition, expose devlink API to create and destroy a reporter. Each devlink instance will hold it's own reporters list. As part of the allocation, driver shall provide a set of callbacks which will be used by devlink in order to handle health reports and user commands related to this reporter. In addition, driver is entitled to provide some priv pointer, which can be fetched from the reporter by devlink_health_reporter_priv function. For each reporter, devlink will hold a metadata of statistics, dump msg and status. For passing dumps and diagnose data to the user-space, it will use devlink fmsg API. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-07 11:36:33 +02:00

net: devlink: move reload fail indication to devlink core and expose to user Currently the fact that devlink reload failed is stored in drivers. Move this flag into devlink core. Also, expose it to the user. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-09-12 10:49:46 +02:00

devlink: allow driver to update progress of flash update Introduce a function to be called from drivers during flash. It sends notification to userspace about flash update progress. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-06-04 15:40:40 +02:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: extend devlink_trap_report() to accept cookie and pass Add cookie argument to devlink_trap_report() allowing driver to pass in the user cookie. Pass on the cookie down to drop monitor code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-02-25 11:45:21 +01:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

devlink: Add API to register packet trap groups Currently, packet trap groups are implicitly registered by drivers upon packet trap registration. When the traps are registered, each is associated with a group and the group is created by devlink, if it does not exist already. This makes it difficult for drivers to pass additional attributes for the groups. Therefore, as a preparation for future patches that require passing additional group attributes, add an API to explicitly register / unregister these groups. Next patches will convert existing drivers to use this API. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-22 20:48:26 +02:00

devlink: Add packet trap policers support Devices capable of offloading the kernel's datapath and perform functions such as bridging and routing must also be able to send (trap) specific packets to the kernel (i.e., the CPU) for processing. For example, a device acting as a multicast-aware bridge must be able to trap IGMP membership reports to the kernel for processing by the bridge module. In most cases, the underlying device is capable of handling packet rates that are several orders of magnitude higher compared to those that can be handled by the CPU. Therefore, in order to prevent the underlying device from overwhelming the CPU, devices usually include packet trap policers that are able to police the trapped packets to rates that can be handled by the CPU. This patch allows capable device drivers to register their supported packet trap policers with devlink. User space can then tune the parameters of these policer (currently, rate and burst size) and read from the device the number of packets that were dropped by the policer, if supported. Subsequent patches in the series will allow device drivers to create default binding between these policers and packet trap groups and allow user space to change the binding. v2: * Add 'strict_start_type' in devlink policy * Have device drivers provide max/min rate/burst size for each policer. Use them to check validity of user provided parameters Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>

2020-03-30 22:38:18 +03:00

devlink: Add packet trap infrastructure Add the basic packet trap infrastructure that allows device drivers to register their supported packet traps and trap groups with devlink. Each driver is expected to provide basic information about each supported trap, such as name and ID, but also the supported metadata types that will accompany each packet trapped via the trap. The currently supported metadata type is just the input port, but more will be added in the future. For example, output port and traffic class. Trap groups allow users to set the action of all member traps. In addition, users can retrieve per-group statistics in case per-trap statistics are too narrow. In the future, the trap group object can be extended with more attributes, such as policer settings which will limit the amount of traffic generated by member traps towards the CPU. Beside registering their packet traps with devlink, drivers are also expected to report trapped packets to devlink along with relevant metadata. devlink will maintain packets and bytes statistics for each packet trap and will potentially report the trapped packet with its metadata to user space via drop monitor netlink channel. The interface towards the drivers is simple and allows devlink to set the action of the trap. Currently, only two actions are supported: 'trap' and 'drop'. When set to 'trap', the device is expected to provide the sole copy of the packet to the driver which will pass it to devlink. When set to 'drop', the device is expected to drop the packet and not send a copy to the driver. In the future, more actions can be added, such as 'mirror'. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-08-17 16:28:17 +03:00

net: devlink: select NET_DEVLINK from drivers Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-24 11:14:38 +01:00

net: devlink: turn devlink into a built-in Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-25 19:34:02 -08:00

net: devlink: introduce devlink_compat_phys_port_name_get() Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-28 13:56:37 +01:00

net: devlink: introduce devlink_compat_switch_id_get() helper Introduce devlink_compat_switch_id_get() helper which fills up switch_id according to passed netdev pointer. Call it directly from dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id is not defined for given netdev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-03 14:24:17 +02:00

net: devlink: turn devlink into a built-in Being able to build devlink as a module causes growing pains. First all drivers had to add a meta dependency to make sure they are not built in when devlink is built as a module. Now we are struggling to invoke ethtool compat code reliably. Make devlink code built-in, users can still not build it at all but the dynamically loadable module option is removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-25 19:34:02 -08:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

ethtool: add compat for devlink info If driver did not fill the fw_version field, try to call into the new devlink get_info op and collect the versions that way. We assume ethtool was always reporting running versions. v4: - use IS_REACHABLE() to avoid problems with DEVLINK=m (kbuildbot). v3 (Jiri): - do a dump and then parse it instead of special handling; - concatenate all versions (well, all that fit :)). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:47 -08:00

ethtool: add compat for flash update If driver does not support ethtool flash update operation call into devlink. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-02-14 13:40:45 -08:00

net: devlink: select NET_DEVLINK from drivers Some drivers are becoming more dependent on NET_DEVLINK being selected in configuration. With upcoming compat functions, the behavior would be wrong in case devlink was not compiled in. So make the drivers select NET_DEVLINK and rely on the functions being there, not just stubs. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-24 11:14:38 +01:00

net: devlink: introduce devlink_compat_phys_port_name_get() Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-03-28 13:56:37 +01:00

net: devlink: introduce devlink_compat_switch_id_get() helper Introduce devlink_compat_switch_id_get() helper which fills up switch_id according to passed netdev pointer. Call it directly from dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id is not defined for given netdev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-04-03 14:24:17 +02:00

ethtool: add compat for devlink info If driver did not fill the fw_version field, try to call into the new devlink get_info op and collect the versions that way. We assume ethtool was always reporting running versions. v4: - use IS_REACHABLE() to avoid problems with DEVLINK=m (kbuildbot). v3 (Jiri): - do a dump and then parse it instead of special handling; - concatenate all versions (well, all that fit :)). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2019-01-31 10:50:47 -08:00

Introduce devlink infrastructure Introduce devlink infrastructure for drivers to register and expose to userspace via generic Netlink interface. There are two basic objects defined: devlink - one instance for every "parent device", for example switch ASIC devlink port - one instance for every physical port of the device. This initial portion implements basic get/dump of objects to userspace. Also, port splitter and port type setting is implemented. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

2016-02-26 17:32:23 +01:00

1468 lines 49 KiB Raw Normal View History

1468 lines

49 KiB

Raw Normal View History