linux/drivers/extcon/extcon-class.c

856 lines
23 KiB

Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon: support multiple states at a device. One switch device (e.g., MUIC(MAX8997, MAX77686, ...), and some 30-pin devices) may have multiple cables attached. For example, one 30-pin port may inhabit a USB cable, an HDMI cable, and a mic. Thus, one switch device requires multiple state bits each representing a type of cable. For such purpose, we use the 32bit state variable; thus, up to 32 different type of cables may be defined for a switch device. The list of possible cables is defined by the array of cable names in the switch_dev struct given to the class. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> -- Changes from V7 - Bugfixed in _call_per_cable() (incorrect nb) (Chanwoo Choi) - Compiler error in header for !CONFIG_EXTCON (Chanwoo Choi) Changes from V5 - Sysfs style reformed: subdirectory per cable. - Updated standard cable names - Removed unnecessary printf - Bugfixes after testing Changes from V4 - Bugfixes after more testing at Exynos4412 boards with userspace processses. Changes from V3 - Bugfixes after more testing at Exynos4412 boards. Changes from V2 - State can be stored by user - Documentation updated Changes from RFC - Switch is renamed to extcon - Added kerneldoc comments - Added APIs to support "standard" cable names - Added helper APIs to support notifier block registration with cable name. - Regrouped function list in the header file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:25 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00
extcon: Unregister compat class at module unload to fix oops If you compile extcon with CONFIG_ANDROID and then load and unload the module you get a simple oops as the driver does not unregister its compat class and thus cannot register it again. Full trace: root@(none):~# modprobe extcon_class root@(none):~# rmmod extcon_class root@(none):~# modprobe extcon_class ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xde/0x100() sysfs: cannot create duplicate filename '/class/switch' Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451a00: [<602a58bc>] printk+0x0/0xa8 9f451a18: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451a28: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451a50: [<601d3d90>] strcat+0x0/0x40 9f451a68: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451a90: [<6002fe32>] unblock_signals+0x0/0x84 9f451ab0: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451ac0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ae8: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b00: [<601d3d90>] strcat+0x0/0x40 9f451b18: [<6012bd97>] sysfs_pathname.isra.10+0x57/0x70 9f451b48: [<6012c6de>] sysfs_add_one+0xde/0x100 9f451b78: [<6012c96f>] create_dir+0x8f/0x100 9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf396>] kobject_add_internal+0x96/0x280 9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c367 ]--- ------------[ cut here ]------------ WARNING: at lib/kobject.c:196 kobject_add_internal+0x26e/0x280() kobject_add_internal failed for switch with -EEXIST, don't try to register things with the same name in the same directory. Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451ad0: [<602a58bc>] printk+0x0/0xa8 9f451ae8: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451af8: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451b18: [<601cf140>] kobject_put+0x0/0x70 9f451b20: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451b38: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451b88: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451bc0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451bd8: [<6012cda6>] sysfs_create_dir+0xa6/0x1c0 9f451be8: [<601d89f1>] kvasprintf+0x81/0xa0 9f451bf8: [<601cf0f0>] kobject_get+0x0/0x50 9f451c18: [<601cf56e>] kobject_add_internal+0x26e/0x280 9f451c60: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451c78: [<601cfb93>] kobject_add+0xd3/0x140 9f451cc0: [<601cfac0>] kobject_add+0x0/0x140 9f451cd0: [<6002fe32>] unblock_signals+0x0/0x84 9f451cf8: [<6002fffc>] set_signals+0x29/0x3f 9f451d28: [<600c1de1>] kmem_cache_alloc+0xe1/0x100 9f451d78: [<601cffa0>] kobject_create_and_add+0x50/0xa0 9f451da8: [<601fbe76>] class_compat_register+0x56/0x80 9f451dc8: [<a085d118>] create_extcon_class+0x88/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c368 ]--- kobject_create_and_add: kobject_add error: -17 ------------[ cut here ]------------ WARNING: at drivers/extcon/extcon_class.c:545 create_extcon_class+0xbc/0xd0 [extcon_class]() cannot allocate Modules linked in: extcon_class(+) [last unloaded: extcon_class] Call Trace: 9f451c80: [<602a58bc>] printk+0x0/0xa8 9f451c98: [<60039b43>] warn_slowpath_common+0x93/0xd0 9f451ca0: [<6002fe32>] unblock_signals+0x0/0x84 9f451ca8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451cd0: [<a0861000>] extcon_class_init+0x0/0x12 [extcon_class] 9f451ce8: [<60039cdc>] warn_slowpath_fmt+0x9c/0xa0 9f451d20: [<6002fe32>] unblock_signals+0x0/0x84 9f451d28: [<60039c40>] warn_slowpath_fmt+0x0/0xa0 9f451d48: [<6002fffc>] set_signals+0x29/0x3f 9f451d58: [<601cf172>] kobject_put+0x32/0x70 9f451d78: [<600c22c3>] kfree+0xb3/0x100 9f451da8: [<601fbe9a>] class_compat_register+0x7a/0x80 9f451dc8: [<a085d14c>] create_extcon_class+0xbc/0xd0 [extcon_class] 9f451de8: [<a0861010>] extcon_class_init+0x10/0x12 [extcon_class] 9f451df8: [<600189a8>] do_one_initcall+0x48/0x1f0 9f451e20: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e30: [<60061920>] blocking_notifier_call_chain+0x0/0x20 9f451e58: [<6007e3c3>] sys_init_module+0xa3/0x280 9f451e88: [<6001e2ad>] handle_syscall+0x8d/0x90 9f451ea8: [<60033370>] userspace+0x405/0x531 9f451ee8: [<6001e380>] copy_chunk_to_user+0x0/0x40 9f451ef8: [<6001e5cd>] do_op_one_page+0x14d/0x220 9f451fd8: [<6001a355>] fork_handler+0x95/0xa0 ---[ end trace dd512cc03fe1c369 ]--- FATAL: Error inserting extcon_class (/lib/modules/3.6.0-rc6-00178-g811315f/kernel/drivers/extcon/extcon_class.ko): Cannot allocate memory This patch fixes this. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2012-09-24 15:32:31 +09:00
Extcon (external connector): import Android's switch class and modify. External connector class (extcon) is based on and an extension of Android kernel's switch class located at linux/drivers/switch/. This patch provides the before-extension switch class moved to the location where the extcon will be located (linux/drivers/extcon/) and updates to handle class properly. The before-extension class, switch class of Android kernel, commits imported are: switch: switch class and GPIO drivers. (splitted) Author: Mike Lockwood <lockwood@android.com> switch: Use device_create instead of device_create_drvdata. Author: Arve Hjønnevåg <arve@android.com> In this patch, upon the commits of Android kernel, we have added: - Relocated and renamed for extcon. - Comments, module name, and author information are updated - Code clean for successing patches - Bugfix: enabling write access without write functions - Class/device/sysfs create/remove handling - Added comments about uevents - Format changes for extcon_dev_register() to have a parent dev. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> -- Changes from v7 - Compiler error fixed when it is compiled as a module. - Removed out-of-date Kconfig entry Changes from v6 - Updated comment/strings - Revised "Android-compatible" mode. * Automatically activated if CONFIG_ANDROID && !CONFIG_ANDROID_SWITCH * Creates /sys/class/switch/*, which is a copy of /sys/class/extcon/* Changes from v5 - Split the patch - Style fixes - "Android-compatible" mode is enabled by Kconfig option. Changes from v2 - Updated name_show - Sysfs entries are handled by class itself. - Updated the method to add/remove devices for the class - Comments on uevent send - Able to become a module - Compatible with Android platform Changes from RFC - Renamed to extcon (external connector) from multistate switch - Added a seperated directory (drivers/extcon) - Added kerneldoc comments - Removed unused variables from extcon_gpio.c - Added ABI Documentation. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-20 14:16:22 +09:00