kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-11-13 07:31:07 +00:00
Code Issues Releases Packages Activity
linux/drivers/leds/trigger/Kconfig

164 lines
4.9 KiB
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 13:07:45 +01:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
docs: leds: convert to ReST Rename the leds documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-06-28 09:20:20 -03:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: convert IDE trigger to common disk trigger This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-10 07:59:56 +02:00
leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA Commit b7fb14d3ac63 ("ide: remove the legacy ide driver") removes the definition of the config IDE_GD_ATA. So, remove the obsolete reference in ./drivers/leds/trigger/Kconfig. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-08-04 14:34:25 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: convert IDE trigger to common disk trigger This patch converts the IDE specific LED trigger to a generic disk activity LED trigger. The libata core is now a trigger source just like before the IDE disk driver. It's merely a replacement of the string ide by disk. The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is widely used by any ibook/powerbook owners with great satisfaction. Likewise, it is very often used successfully on different ARM platforms. Unlike the original patch, the existing 'ide-disk' trigger is still available for backward compatibility. That reduce the amount of patches in affected device trees out of the mainline kernel. For further development, the new name 'disk-activity' should be used. Cc: Joseph Jezak <josejx@gentoo.org> Cc: Jörg Sommer <joerg@alea.gnuu.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-10 07:59:56 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: trigger: Introduce a MTD (NAND/NOR) trigger This commit introduces a MTD trigger for flash (NAND/NOR) device activity. The implementation is copied from IDE disk. This trigger deprecates the "nand-disk" LED trigger, but for backwards compatibility, we still keep the "nand-disk" trigger around. The motivation for deprecating the "nand-disk" LED trigger is that it only works for NAND drivers, whereas the "mtd" LED trigger is more generic (in fact, "nand-disk" currently only works for certain NAND drivers). Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-12 17:46:40 -03:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: trigger: Disable CPU trigger on PREEMPT_RT The CPU trigger is invoked on ARM from CPU-idle. That trigger later invokes led_trigger_event() which may invoke the callback of the actual driver. That driver can acquire a spinlock_t which is okay on kernel without PREEMPT_RT. On a PREEMPT_RT enabled kernel this lock is turned into a sleeping lock and must not be acquired with disabled interrupts. Disable the CPU trigger on PREEMPT_RT. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lkml.kernel.org/r/20210924111501.m57cwwn7ahiyxxdd@linutronix.de Signed-off-by: Pavel Machek <pavel@ucw.cz>
2021-10-13 11:37:19 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: ledtrig-activity: Add a system activity LED trigger The "activity" trigger was inspired by the heartbeat one, but aims at providing instant indication of the immediate CPU usage. Under idle condition, it flashes 10ms every second. At 100% usage, it flashes 90ms every 100ms. The blinking frequency increases from 1 to 10 Hz until either the load is high enough to saturate one CPU core or 50% load is reached on a single-core system. Then past this point only the duty cycle increases from 10 to 90%. This results in a very visible activity reporting allowing one to immediately tell whether a machine is under load or not, making it quite suitable to be used in clusters. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-28 20:44:51 +02:00
ledtrig-activity: Grammar s/a immediate/an immediate/ Fixes: 7df4f9a9f0667ee6 ("leds: ledtrig-activity: Add a system activity LED trigger") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-11-30 14:36:41 +01:00
leds: ledtrig-activity: Add a system activity LED trigger The "activity" trigger was inspired by the heartbeat one, but aims at providing instant indication of the immediate CPU usage. Under idle condition, it flashes 10ms every second. At 100% usage, it flashes 90ms every 100ms. The blinking frequency increases from 1 to 10 Hz until either the load is high enough to saturate one CPU core or 50% load is reached on a single-core system. Then past this point only the duty cycle increases from 10 to 90%. This results in a very visible activity reporting allowing one to immediately tell whether a machine is under load or not, making it quite suitable to be used in clusters. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-08-28 20:44:51 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: Allow compile test of GPIO consumers if !GPIOLIB The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-05-05 18:32:25 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: triggers: gpio: Rewrite to use trigger-sources By providing a GPIO line as "trigger-sources" in the FWNODE (such as from the device tree) and combining with the GPIO trigger, we can support a GPIO LED trigger in a natural way from the hardware description instead of using the custom sysfs and deprecated global GPIO numberspace. Example: gpio: gpio@0 { compatible "my-gpio"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; #trigger-source-cells = <2>; }; leds { compatible = "gpio-leds"; led-my-gpio { label = "device:blue:myled"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "gpio"; trigger-sources = <&gpio 1 GPIO_ACTIVE_HIGH>; }; }; Make this the norm, unmark the driver as broken. Delete the sysfs handling of GPIOs. Since GPIO descriptors inherently can describe inversion, the inversion handling can just be deleted. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230926-gpio-led-trigger-dt-v2-3-e06e458b788e@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2023-09-26 23:48:13 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00
leds: add camera LED triggers Some LED devices support flash/torch functionality through the LED subsystem. This patch enables direct LED trigger controls by the driver. Flash on/off and torch on/off can be done simply by other driver space. Two trigger APIs are added, ledtrig_flash_ctrl() and ledtrig_torch_ctrl(). Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-03-14 04:29:24 -07:00
leds: trigger: Introduce a kernel panic LED trigger This commit introduces a new LED trigger which allows to configure a LED to blink on a kernel panic (through panic_blink). Notice that currently the Openmoko FreeRunner (GTA02) mach code sets panic_blink to blink a hard-coded LED. The new trigger is meant to introduce a generic mechanism to achieve this. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-29 17:35:47 -03:00
leds: triggers: Allow to switch the trigger to "panic" on a kernel panic This commit adds a new led_cdev flag LED_PANIC_INDICATOR, which allows to mark a specific LED to be switched to the "panic" trigger, on a kernel panic. This is useful to allow the user to assign a regular trigger to a given LED, and still blink that LED on a kernel panic. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Matthias Brugger <mbrugger@suse.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-04-28 19:03:38 -03:00
leds: trigger: Introduce a kernel panic LED trigger This commit introduces a new LED trigger which allows to configure a LED to blink on a kernel panic (through panic_blink). Notice that currently the Openmoko FreeRunner (GTA02) mach code sets panic_blink to blink a hard-coded LED. The new trigger is meant to introduce a generic mechanism to achieve this. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-03-29 17:35:47 -03:00
leds: trigger: Introduce a NETDEV trigger This commit introduces a NETDEV trigger for named device activity. Available triggers are link, rx, and tx. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-10 21:17:55 +00:00
leds: triggers: don't depend on LEDS_TRIGGERS twice All the triggers are defined in a big if LEDS_TRIGGERS...endif block. So there is no need to let each driver depend on LEDS_TRIGGERS explicitly once more. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-26 11:37:58 +02:00
leds: trigger: Introduce a NETDEV trigger This commit introduces a NETDEV trigger for named device activity. Available triggers are link, rx, and tx. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-10 21:17:55 +00:00
leds: core: Introduce LED pattern trigger This patch adds a new LED trigger that LED device can configure to employ software or hardware pattern engine. Consumers can write 'pattern' file to enable the software pattern which alters the brightness for the specified duration with one software timer. Moreover consumers can write 'hw_pattern' file to enable the hardware pattern for some LED controllers which can autonomously control brightness over time, according to some preprogrammed hardware patterns. Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11 12:07:14 +08:00
leds: trigger: implement a tty trigger Usage is as follows: myled=ledname tty=ttyS0 echo tty > /sys/class/leds/$myled/trigger echo $tty > /sys/class/leds/$myled/ttyname . When this new trigger is active it periodically checks the tty's statistics and when it changed since the last check the led is flashed once. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210113173018.bq2fkea2o3yp6rf6@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-13 18:30:18 +01:00
leds: trigger: Add new LED Input events trigger Add a new trigger which turns LEDs on when there is input (/dev/input/event*) activity and turns them back off again after there has been no activity for 5 seconds. This is primarily intended to control LED devices which are a backlight for capacitive touch-buttons, such as e.g. the menu / home / back buttons found on the bottom bezel of many somewhat older smartphones and tablets. This can also be used to turn on the keyboard backlight LED on input events and turn the keyboard backlight off again when idle. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240531135910.168965-2-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-05-31 15:59:10 +02:00
leds: move LED trigger drivers into new subdirectory For better driver management, new subdirectory, 'trigger' is created. All LED trigger drivers are moved into this directory. Internal header, 'leds.h' is included in each LED trigger drivers. Fix the location of header file, "leds.h" -> "../leds.h" in driver files. One exception is here, 'ledtrig-timer.c'. There is no need to include 'leds.h'. so '#include "leds.h"' line was removed. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-20 00:36:01 -08:00